- 09 8月, 2005 8 次提交
-
-
由 Michael Krufky 提交于
- Structural changes within lgdt330x driver, framework now supports both chips... tested OK on lgdt3302 and lgdt3303. - Add LG/TUA6034 dvb_pll_desc for ATSC with LG TDVS-H062F & DViCO FusionHDTV5. - Fixed LGDT330X signal strength: For now, always set it to 0. - Corrected LGDT330X boundary condition error in read_snr: dB calculation. Signed-off-by: NMac Michaels <wmichaels1@earthlink.net> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Cornelia Huck 提交于
From: Martin Schwidesky <schwidefsky@de.ibm.com> Convert qeth to the new klist interface and make it compiling again. Signed-off-by: NFrank Pavlic <pavlic@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Harald Welte 提交于
With the introduction of 'rustynat' in 2.6.11, the old tricks of preventing NAT of 'untracked' connections (e.g. NOTRACK target in 'raw' table) are no longer sufficient. The ip_conntrack_untracked.status |= IPS_NAT_DONE_MASK effectively prevents iteration of the 'nat' table, but doesn't prevent nat_packet() to be executed. Since nr_manips is gone in 'rustynat', nat_packet() now implicitly thinks that it has to do NAT on the packet. This patch fixes that problem by explicitly checking for ip_conntrack_untracked in ip_nat_fn(). Signed-off-by: NHarald Welte <laforge@netfilter.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 James Morris 提交于
-
由 Ivan Kokshaysky 提交于
Like many other southbridges from different manufacturers, VIA VT8235 chip has two non-standard BARs for power management and SMBus registers (see the datasheet at http://www.via.com.tw). This new quirk routine fixes boot problem with 2.6.13-rc2/rc6 kernels on Targa Visionary 811 Athlon64 laptop, as reported by Mikael Pettersson <mikpe@csd.uu.se>. Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino Daplas 提交于
Reported by:Vincent Fortier (Bugzilla Bug 4768) "At boot time the screen appears moved to the mid right portion of the actual video pannel making the end of the line appears at the left edge... It simply looks like moved half way to the right" His particular hardware has a display with an unusual dimension (1920x1200) but unfortunately has no EDID block. None of the entries in the global mode database is correct for this particular display, and it particularly has difficulty scaling up 640x480 (the default startup mode of nvidiafb) to 1920x1200 which causes the above described problem. 1, Add 1920x1200 to the global mode database. 2. Let nvidiafb base the startup mode from the flatpanel dimensions only if the EDID block is absent, no boot mode parameter is specified by the user, and a flatpanel/LCD display is attached. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Mackerras 提交于
Update the default/example configs for ppc64. Pretty boring... Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Arnd Bergmann 提交于
This adds a bpa_defconfig file and make target. The config settings are made for the current version of the Cell Processor Based Blade, so there are not too many drivers enabled. A few more drivers might get added in the future though. Signed-off-by: NArnd Bergmann <arndb@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 08 8月, 2005 17 次提交
-
-
由 Linus Torvalds 提交于
Last (?) -rc, partly brought on by the aic7xxx performance fixes (ie get them tested in an -rc release before the real 2.6.13).
-
由 Dominik Hackl 提交于
This patch fixes a typo in lib/crc32.c which results in incorrect debug output. Signed-off-by: NDominik Hackl <dominik@hackl.dhs.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ravikiran G Thirumalai 提交于
Move the fix to align node_end_pfns to a proper location. The earlier fix made the node_remap_start_vaddr to get misaligned causing remap_numa_kva to barf again :-/ Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org> Signed-off-by: NShai Fultheim <shai@scalex86.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Marcelo Tosatti 提交于
Touching the pte directly causes the 8Mbyte TLB entry to be invalidated. This has been fixed in v2.4 for ages. Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
8xx: commproc.c: kill unused variable Signed-off-by: NAristeu Sergio Rozanski Filho <aris@cathedrallabs.org> Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
8xx: restrict ENET_BIG_BUFFERS option to drivers which actually use it Signed-off-by: NAristeu Sergio Rozanski Filho <aris@cathedrallabs.org> Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
8xx: fix CPM Ethernet description Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: NAristeu Sergio Rozanski Filho <aris@cathedrallabs.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
8xx: fec: fix interrupt handler prototypes Signed-off-by: NAristeu Sergio Rozanski Filho <aris@conectiva.com.br> Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
8xx: using dma_alloc_coherent() instead consistent_alloc() Signed-off-by: NAristeu Sergio Rozanski Filho <aris@conectiva.com.br> Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
8xx: convert fec driver to use work_struct Signed-off-by: NAristeu Sergio Rozanski Filho <aris@conectiva.com.br> Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
I'm resending this patch, because I still believe it's the correct fix. Tested before/after applying the patch with a test application available from: http://www.inf.bme.hu/~mszeredi/nstest.c Bind mount from a foreign namespace results in an un-removable mount. The reason is that mnt->mnt_namespace is copied from the old mount in clone_mnt(). Because of this check_mnt() in sys_umount() will fail. The solution is to set mnt->mnt_namespace to current->namespace in clone_mnt(). clone_mnt() is either called from do_loopback() or copy_tree(). copy_tree() is called from do_loopback() or copy_namespace(). When called (directly or indirectly) from do_loopback(), always current->namspace is being modified: check_mnt(nd->mnt). So setting mnt->mnt_namespace to current->namspace is the right thing to do. When called from copy_namespace(), the setting of mnt_namespace is irrelevant, since mnt_namespace is reset later in that function for all copied mounts. Jamie said: This patch is correct. The old code was buggy for more fundamental and serious reason: it broke the invariant that a tree of vfsmnts all have the same value of mnt_namespace (and the same for the mnt_list list). Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Acked-by: NJamie Lokier <jamie@shareable.org> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Olaf Hering 提交于
sparc can not include linux/pagemap.h because of the following circular dependency: asm-sparc/pgtable include linux/swap.h linux/swap.h include now linux/pagemap.h linux/pagemap.h include linux/mm.h linux/mm.h include asm/pgtable.h It needs to have the swp_entry_t type fully visible in pgtable.h, we can't work around this using macros. Signed-off-by: NOlaf Hering <olh@suse.de> Cc: William Lee Irwin III <wli@holomorphy.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tom Duffy 提交于
This patch add stubs to allow the visws subarch to link again. Signed-off-by: NTom Duffy <thomas.duffy.99@alumni.brown.edu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tom Duffy 提交于
In file included from linux-2.6.13-rc5/arch/i386/kernel/timers/timer_pit.c:20: linux-2.6.13-rc5/include/asm-i386/mach-visws/do_timer.h: In function `do_timer_overflow': linux-2.6.13-rc5/include/asm-i386/mach-visws/do_timer.h:32: error: `i8259A_lock' undeclared (first use in this function) linux-2.6.13-rc5/include/asm-i386/mach-visws/do_timer.h:32: error: (Each undeclared identifier is reported only once linux-2.6.13-rc5/include/asm-i386/mach-visws/do_timer.h:32: error: for each function it appears in.) make[3]: *** [arch/i386/kernel/timers/timer_pit.o] Error 1 make[2]: *** [arch/i386/kernel/timers] Error 2 make[1]: *** [arch/i386/kernel] Error 2 make: *** [_all] Error 2 Signed-off-by: NTom Duffy <thomas.duffy.99@alumni.brown.edu> Cc: Andrey Panin <pazke@orbita1.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
Remove a very wrong comment. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Don't log machine check events left over from boot. Too many BIOSes leave bogus events in there. This unfortunately also makes it impossible to log events that caused a reboot. For people with non broken BIOS there is mce=bootlog Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ivan Kokshaysky 提交于
For 64-bit BAR[i] only pci_dev->resource[i] is valid, ->resource[i+1] slot is unused and contains zeroes in all fields. So when we update a PCI BAR, all we need is just to check that we're going to update a _valid_ resource. Also make sure to write high bits - use "x >> 16 >> 16" (rather than the simpler ">> 32") to avoid warnings on 32-bit architectures where we're not going to have any high bits. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 8月, 2005 8 次提交
-
-
由 Eric W. Biederman 提交于
When the sparse mem changes and the kexec changes were merged into setup.c they came in, in the wrong order. This patch changes the order so we don't run sparse_init which uses the bootmem allocator until we all of the reserve_bootmem calls has been made. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric W. Biederman 提交于
Another x86 subarchitecture bit I missed. This adds both machine_emergency_restart missed in my reboot fixes and machine_shutdown needed for kexec support. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric W. Biederman 提交于
Here is one more bit of breakage my x86 sub-architecture confusion caused. Add machine_shutdown to voyager so it will compile with CONFIG_KEXEC. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
When we did the handle_mm_fault cleanup and get_user_page() race fixes, handle_mm_fault turned into an inline function that called the real __handle_mm_fault() code. The export needed for MOL on ppc wasn't updated to match the new world order, though. Turn it into a GPL export while at it, since this is all about internal interfaces and MOL is GPL'd anwyay.
-
由 Linus Torvalds 提交于
This uses the new deflateBound() thing to sanity-check the input to the zlib decompressor before we even bother to start reading in the blocks. Problem noted by Tim Yamin <plasmaroo@gentoo.org>
-
由 Linus Torvalds 提交于
It's not the real deflateBound() in newer zlib libraries, partly because the upcoming usage of it won't have the "stream" available, so we can't have the same interfaces anyway.
-
由 Matt Porter 提交于
Here's an incremental patch with comment updates and some additional grammar cleanups. Signed-off-by: NMatt Porter <mporter@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 06 8月, 2005 7 次提交
-
-
由 Marcel Holtmann 提交于
This patch changes the direction to incoming and adds the timestamp to all stack internal events. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
This patch removes the unused bt_dump() function and it also removes its BT_DMP macro. It also unexports the hci_dev_get(), hci_send_cmd() and hci_si_event() functions. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
There's no need to check for NULL before calling kfree() on a pointer. Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
The fix for the reference counting problem of the signal DLC introduced a race condition which leads to an oops. The reason for it is not fully understood by now and so revert this fix, because the reference counting problem is not crashing the RFCOMM layer and its appearance it rare. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
The Kensington Bluetooth USB adapter is based on a Broadcom chip with the HID proxy support. To initialize these kind of devices correctly it is necessary to send HCI_Reset as the first command. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Matt Porter 提交于
This patch fixes a bug in the PPC440 pagetable attributes that breaks swap support. It also adds some notes on the PPC440 attribute fields. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> for CELF Signed-off-by: NMatt Porter <mporter@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tim Yamin 提交于
These bugs have been fixed in the standard zlib for a while. See for example a) http://sources.redhat.com/ml/bug-gnu-utils/1999-06/msg00183.html b) http://bugs.gentoo.org/show_bug.cgi?id=94584Signed-off-by: NTim Yamin <plasmaroo@gentoo.org> Signed-off-by: NTavis Ormandy <taviso@gentoo.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-