- 13 3月, 2011 4 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Create two sets of port member accessors, one set prefixed by fl4_* and the other prefixed by fl6_* This will let us to create AF optimal flow instances. It will work because every context in which we access the ports, we have to be fully aware of which AF the flowi is anyways. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
I intend to turn struct flowi into a union of AF specific flowi structs. There will be a common structure that each variant includes first, much like struct sock_common. This is the first step to move in that direction. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 3月, 2011 1 次提交
-
-
由 David S. Miller 提交于
Instead of on the stack. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 3月, 2011 1 次提交
-
-
由 David S. Miller 提交于
The route lookup code in icmpv6_send() is slightly tricky as a result of having to handle all of the requirements of RFC 4301 host relookups. Pull the route resolution into a seperate function, so that the error handling and route reference counting is hopefully easier to see and contained wholly within this new routine. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 2月, 2011 1 次提交
-
-
由 David S. Miller 提交于
Like metrics, the ICMP rate limiting bits are cached state about a destination. So move it into the inet_peer entries. If an inet_peer cannot be bound (the reason is memory allocation failure or similar), the policy is to allow. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 6月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
In commit 1f8438a8 (icmp: Account for ICMP out errors), I did a typo on IPV6 side, using ICMP6_MIB_OUTMSGS instead of ICMP6_MIB_OUTERRORS Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 4月, 2010 1 次提交
-
-
由 Brian Haley 提交于
Add dontfrag argument to relevant functions for IPV6_DONTFRAG support, as well as allowing the value to be passed-in via ancillary cmsg data. Signed-off-by: NBrian Haley <brian.haley@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 4月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
When ip_append() fails because of socket limit or memory shortage, increment ICMP_MIB_OUTERRORS counter, so that "netstat -s" can report these errors. LANG=C netstat -s | grep "ICMP messages failed" 0 ICMP messages failed For IPV6, implement ICMP6_MIB_OUTERRORS counter as well. # grep Icmp6OutErrors /proc/net/dev_snmp6/* /proc/net/dev_snmp6/eth0:Icmp6OutErrors 0 /proc/net/dev_snmp6/lo:Icmp6OutErrors 0 Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 19 2月, 2010 2 次提交
-
-
由 Alexey Dobriyan 提交于
Dunno, what was the idea, it wasn't used for a long time. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
ICMP6 MIB statistics was per-netns for quite a time. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 1月, 2010 1 次提交
-
-
由 Alexey Dobriyan 提交于
__net_init/__net_exit are apparently not going away, so use them to full extent. In some cases __net_init was removed, because it was called from __net_exit code. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 11月, 2009 1 次提交
-
-
由 Eric W. Biederman 提交于
Now that sys_sysctl is a compatiblity wrapper around /proc/sys all sysctl strategy routines, and all ctl_name and strategy entries in the sysctl tables are unused, and can be revmoed. In addition neigh_sysctl_register has been modified to no longer take a strategy argument and it's callers have been modified not to pass one. Cc: "David Miller" <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: netdev@vger.kernel.org Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
-
- 15 9月, 2009 1 次提交
-
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 8月, 2009 1 次提交
-
-
由 Gerrit Renker 提交于
This replaces assignments of the type "int on LHS" = "u8 on RHS" with simpler code. The LHS can express all of the unsigned right hand side values, hence the assigned value can not be negative. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 6月, 2009 1 次提交
-
-
由 Brian Haley 提交于
Change all the code that deals directly with ICMPv6 type and code values to use u8 instead of a signed int as that's the actual data type. Signed-off-by: NBrian Haley <brian.haley@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 1月, 2009 1 次提交
-
-
由 Jiri Pirko 提交于
This patch fixes the xfrm reverse flow lookup for icmp6 so that icmp6 packets don't get lost over ipsec tunnels. Similar patch is in RHEL5 kernel for a quite long time and I do not see why it isn't in mainline. Signed-off-by: NJiri Pirko <jpirko@redhat.com> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 11月, 2008 1 次提交
-
-
由 Alexey Dobriyan 提交于
Pass netns to xfrm_lookup()/__xfrm_lookup(). For that pass netns to flow_cache_lookup() and resolver callback. Take it from socket or netdevice. Stub DECnet to init_net. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 11月, 2008 1 次提交
-
-
由 Joe Perches 提交于
The first argument to csum_partial is const void * casts to char/u8 * are not necessary Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 11月, 2008 1 次提交
-
-
由 Alexey Dobriyan 提交于
I want to compile out proc_* and sysctl_* handlers totally and stub them to NULL depending on config options, however usage of & will prevent this, since taking adress of NULL pointer will break compilation. So, drop & in front of every ->proc_handler and every ->strategy handler, it was never needed in fact. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 10月, 2008 1 次提交
-
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 10月, 2008 2 次提交
-
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
ifdef out * struct sk_buff::sp (pointer) * struct dst_entry::xfrm (pointer) * struct sock::sk_policy (2 pointers) Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 10月, 2008 3 次提交
-
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 8月, 2008 1 次提交
-
-
由 Denis V. Lunev 提交于
Pass namespace into icmp_xmit_lock, obtain socket inside and return it as a result for caller. Thanks Alexey Dobryan for this report: Steps to reproduce: CONFIG_PREEMPT=y CONFIG_DEBUG_PREEMPT=y tracepath <something> BUG: using smp_processor_id() in preemptible [00000000] code: tracepath/3205 caller is icmp_sk+0x15/0x30 Pid: 3205, comm: tracepath Not tainted 2.6.27-rc4 #1 Call Trace: [<ffffffff8031af14>] debug_smp_processor_id+0xe4/0xf0 [<ffffffff80409405>] icmp_sk+0x15/0x30 [<ffffffff8040a17b>] icmp_send+0x4b/0x3f0 [<ffffffff8025a415>] ? trace_hardirqs_on_caller+0xd5/0x160 [<ffffffff8025a4ad>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8023a475>] ? local_bh_enable_ip+0x95/0x110 [<ffffffff804285b9>] ? _spin_unlock_bh+0x39/0x40 [<ffffffff8025a26c>] ? mark_held_locks+0x4c/0x90 [<ffffffff8025a4ad>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8025a415>] ? trace_hardirqs_on_caller+0xd5/0x160 [<ffffffff803e91b4>] ip_fragment+0x8d4/0x900 [<ffffffff803e7030>] ? ip_finish_output2+0x0/0x290 [<ffffffff803e91e0>] ? ip_finish_output+0x0/0x60 [<ffffffff803e6650>] ? dst_output+0x0/0x10 [<ffffffff803e922c>] ip_finish_output+0x4c/0x60 [<ffffffff803e92e3>] ip_output+0xa3/0xf0 [<ffffffff803e68d0>] ip_local_out+0x20/0x30 [<ffffffff803e753f>] ip_push_pending_frames+0x27f/0x400 [<ffffffff80406313>] udp_push_pending_frames+0x233/0x3d0 [<ffffffff804067d1>] udp_sendmsg+0x321/0x6f0 [<ffffffff8040d155>] inet_sendmsg+0x45/0x80 [<ffffffff803b967f>] sock_sendmsg+0xdf/0x110 [<ffffffff8024a100>] ? autoremove_wake_function+0x0/0x40 [<ffffffff80257ce5>] ? validate_chain+0x415/0x1010 [<ffffffff8027dc10>] ? __do_fault+0x140/0x450 [<ffffffff802597d0>] ? __lock_acquire+0x260/0x590 [<ffffffff803b9e55>] ? sockfd_lookup_light+0x45/0x80 [<ffffffff803ba50a>] sys_sendto+0xea/0x120 [<ffffffff80428e42>] ? _spin_unlock_irqrestore+0x42/0x80 [<ffffffff803134bc>] ? __up_read+0x4c/0xb0 [<ffffffff8024e0c6>] ? up_read+0x26/0x30 [<ffffffff8020b8bb>] system_call_fastpath+0x16/0x1b icmp6_sk() is similar. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 7月, 2008 1 次提交
-
-
由 Stephen Hemminger 提交于
Convert the sysctl values for icmp ratelimit to use milliseconds instead of jiffies which is based on kernel configured HZ. Internal kernel jiffies are not a proper unit for any userspace API. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 6月, 2008 1 次提交
-
-
由 Adrian Bunk 提交于
This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 4月, 2008 2 次提交
-
-
由 Denis V. Lunev 提交于
Do this by replacing sock_create_kern with inet_ctl_sock_create. Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
The ICMP relookup path is only meant to modify behaviour when appropriate IPsec policies are in place and marked as requiring relookups. It is certainly not meant to modify behaviour when IPsec policies don't exist at all. However, due to an oversight on the error paths existing behaviour may in fact change should one of the relookup steps fail. This patch corrects this by redirecting all errors on relookup failures to the previous code path. That is, if the initial xfrm_lookup let the packet pass, we will stand by that decision should the relookup fail due to an error. This should be safe from a security point-of-view because compliant systems must install a default deny policy so the packet would'nt have passed in that case. Many thanks to Julian Anastasov for pointing out this error. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 4月, 2008 1 次提交
-
-
由 Herbert Xu 提交于
When we encounter an error while looking up the dst the second time we need to drop the first dst. This patch is pretty much the same as the one for IPv4. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 3月, 2008 2 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Introduce per-sock inlines: sock_net(), sock_net_set() and per-inet_timewait_sock inlines: twsk_net(), twsk_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
- 25 3月, 2008 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Last part of hop-limit determination is always: hoplimit = dst_metric(dst, RTAX_HOPLIMIT); if (hoplimit < 0) hoplimit = ipv6_get_hoplimit(dst->dev). Let's consolidate it as ip6_dst_hoplimit(dst). Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
- 06 3月, 2008 2 次提交
-
-
由 Benjamin Thery 提交于
This patch make the changes necessary to support network namespaces in ICMPv6. Signed-off-by: NBenjamin Thery <benjamin.thery@bull.net> Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Lezcano 提交于
Add an netns parameter to ip6_route_output. That will allow to access to the right routing table for outgoing traffic. Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NBenjamin Thery <benjamin.thery@bull.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 3月, 2008 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
For later use, this patch is renaming ndisc_flow_init() to icmpv6_flow_init() and putting it in common place. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-