When an MBX command timeout happens,the resources associated with
the MBX command were freed. If FW were to give the response to
host after the timeout value set by driver then driver crashes as the MBX Cmd
resources were already freed.

This patch fixes this issue by maintaing a state flag for each of
the MBX command posted/timedout/completed.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

https://bugzilla.kernel.org/show_bug.cgi?id=67091

Cc: Jayamohan Kallickal <Jayamohan.Kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

There are two memory leaks in cases 'ISCSI_NET_PARAM_VLAN_ID' and
'ISCSI_NET_PARAM_VLAN_PRIORITY' and also a potential junk pointer free if
mgmt_get_if_info() returns error because if_info will be unset and it is stack
allocated.
Signed-off-by: NGeyslan G. Bem <geyslan@gmail.com>
Cc: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

If certain configuration it is possible that ICD range is not page-aligned.
SGL posting failed in these configuration and driver load was not success.
This fix aligns ICD range values and SGL posting for IO is done.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NMinh Tran <minhduc.tran@emulex.com>
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

When iSCSI stack invokes Abort or Reset handlers, the aborted tasks
Invalid Bit in WRB needs to be set. Else FW will not be aware of
the command invalidated which leads to BAD_WRB error posted by FW.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

When MBX_Cmd completion happens with error code Insufficient Buffer,
the MBX_Cmd is posted again with the new buffer size posted by FW.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

The MSIx to be created for SKH-R adapter should be based on
eq_count returned by get_fw_config.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Display CID available on each iSCSI Fn which can be used to
offload a connection. The display is split across available CID
on each chute.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

The connection is offload to each chute in a round-robin manner
if both the chute is loaded with iSCSI protocol
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Configuration parameters returns the number of connection that
can be offloaded one each chute.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Configuration parameters return number of CID each chute supports. The WRB_Q
is created for the passed CID count. If both the Chute has iSCSI Protocol then
WRB_Q creation is in a round robin mechanism.

For BE-X family iSCSI protocol is loaded only on single chute.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Initialization of SGL and related PAGE posting is to be done for the chute.
Based on configuration value of each Chute,SGL initialization and page posting
is done.

For BE-X family iSCSI protocol is loaded only on single chute
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Template HDR is created for each chute which has iSCSI Protocol loaded.
For BE-X family iSCSI protocol is loaded only on single chute.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

DEF_Q[HDR/DATA] is created on the chute on which iSCSI Protocol is loaded.
When a connection is offloaded, the DEF_Q HDR/Data ID needs to be passed.
FW posts ASYNC message received from target on the passed DEF_Q. Connection
can be offloaded on any of the chute so DEF_Q is created on each Chute.

Change in the ASYNC path initialization based on the configuration parameters
returned for each chute.

For BE-X family iSCSI protocol is loaded only on single chute.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

On the adapter iSCSI protocol can be loaded on either one or both
the CHUTE.Check on which CHUTE iSCSI Protocol is loaded and get
configuration parameters based on which driver initization is done.

For BE-X family iSCSI protocol is loaded only on single chute.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

The timeout set in MBX_CMD is 100sec and the ready bit checking in BMBX
mode is done for 4sec. After 4sec the task is scheduled out for 5 secs
to avoid kernel soft lockup stack trace. The loop of 4sec ready bit check
and then schedule out is done until the following conditon occur
- The Ready Bit is Set
- The timeout set in MBX_CMD expires
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

The default pdu is a common resource and needs to be protected
while manipulating it.
Signed-off-by: NMinh Tran <minhduc.tran@emulex.com>
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

- Removed the check of MaxXmitDSL == 0 as this is not a possible
  case.
- Update connection offload data structure for SKH-R adapters.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Storing MAC ADDR of each function in it's priv structure to
avoid issuing MAC_ADDR get IOCTL. Based on a flag set/unset
it's decided if MAC_ADDR is stored in priv structure or IOCTL
needs to be issued.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

When MBX CMD is posted in MCCQ and if command times out,during
mccq resource cleanup for the timed out command  mccq->count
was not decremented. The led to BUG_ON being hit.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Allocating memory in the Host which will be used by the
TOE functionality during Session Offload. This fix will
allow performance improvement as adapter memory contention
will be reduced.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

For the workqueue creation interfaces that do not expect format strings,
make sure they cannot accidently be parsed that way.  Additionally, clean
up calls made with a single parameter that would be handled as a format
string.  Many callers are passing potentially dynamic string content, so
use "%s" in those cases to avoid any potential accidents.
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Command Window value from the CQE was used to calculate the
max_cmdsn for that session.The command window value extracted
for SKH-R adapter was not proper. The value was extracted from
BE adapter completion event. Fixed the issue by getting the
cmd_wnd value from SKH-R CQE.

The exp_cmdsn and max_cmdsn values were not converted to BE format
before calling the __iscsi_complete_pdu(). Fixed the issue of converting
to BE format.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

The driver creates "NAPI" context per core which is fine,
however the above routine declares the ret variable as static!
Thus there is only one instance of this variable!
When this routine is called from more than one thread of execution,
than the result is unpredictable.

         static unsigned int ret;
         .....

         ret = beiscsi_process_cq(pbe_eq);
                 <--------Another thread can enter here and change "ret".
         if (ret < budget) {
                ....
         }
                 <--------Another thread can enter here and change "ret".
         return ret;

Fix - remove the "static"
Signed-off-by: NShlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Before tyring to establish a CXN with the target, check if the adapter is in
a stable state
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Number of CID assigned to a function from adapter can be dynamic. The CID count
for each function was fixed number before. Code Fix done so that adapters with
fixed/dynamic CID count will work with the driver.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

When target send a NOP-IN with valid TTT, driver issues a NOP-OUT
and the task was not freed from driver. The task list available for
the session used to run out, and as no more task list were available
no more iSCSI commands were exchanged on that session.
This patches fixed the issue, by calling iscsi_put_task.
Signed-off-by: NMinh Tran <minhduc.tran@emulex.com>
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Check the Logical Link status also as part of the port link status.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

This patch fixes the displaying of number of active
sessions in use.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

The mgmt_hba_attributes structure declared was not proper and
because of that the FW response returned for the MBX_CMD was not
matching. This issue went unnoticed as mgmt_hba_attribs structure
members were never used in the code path.

This fix of displaying the FW version had to change the mgmt_hba_attrib
structure also. The latest driver will also work with the older FW as
the issue was in the driver declaration.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Fix support for DEFQ extension which will be used by latest
adapters
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Fixed the code flow based on the MACRO defined to check for
adapter.
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

Free CXN specific resource held by driver when login redirection
or connection retry happens. Login redirection was failing
because WRB/SGL were not allocated from the CID on which
doorbell was rung.

Fixed the issue raised by MikeC
Signed-off-by: NJohn Soni Jose <sony.john-n@emulex.com>
Signed-off-by: NJayamohan Kallickal <jayamohan.kallickal@emulex.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>