- 14 1月, 2011 2 次提交
-
-
-
由 Pablo Neira Ayuso 提交于
This patch fixes a loop in ctnetlink_get_conntrack() that can be triggered if you use the same socket to receive events and to perform a GET operation. Under heavy load, netlink_unicast() may return -EAGAIN, this error code is reserved in nfnetlink for the module load-on-demand. Instead, we return -ENOBUFS which is the appropriate error code that has to be propagated to user-space. Reported-by: NHolger Eitzenberger <holger@eitzenberger.org> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 13 1月, 2011 9 次提交
-
-
由 Randy Dunlap 提交于
Fix new kernel-doc warning (copy-paste typo): Warning(net/ethernet/eth.c:366): No description found for parameter 'rxqs' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
The RED statistics structure includes backlog field which is not set or used by any code. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
kzalloc'd memory doesn't need a memset to 0. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NRasesh Mody <rmody@brocade.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
-
由 Alexey Kuznetsov 提交于
Linux IPv6 forwards unicast packets, which are link layer multicasts... The hole was present since day one. I was 100% this check is there, but it is not. The problem shows itself, f.e. when Microsoft Network Load Balancer runs on a network. This software resolves IPv6 unicast addresses to multicast MAC addresses. Signed-off-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 KOVACS Krisztian 提交于
The IPv6 tproxy patches split IPv6 defragmentation off of conntrack, but failed to update the #ifdef stanzas guarding the defragmentation related fields and code in skbuff and conntrack related code in nf_defrag_ipv6.c. This patch adds the required #ifdefs so that IPv6 tproxy can truly be used without connection tracking. Original report: http://marc.info/?l=linux-netdev&m=129010118516341&w=2Reported-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NKOVACS Krisztian <hidden@balabit.hu> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 12 1月, 2011 12 次提交
-
-
由 Kees Cook 提交于
Commit fe10ae53 adds a memset() to clear the structure being sent back to userspace, but accidentally used the wrong size. Reported-by: NBrad Spengler <spender@grsecurity.net> Signed-off-by: NKees Cook <kees.cook@canonical.com> Cc: stable@kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Casey Leedom 提交于
If the Link Start fails in cxgb4vf_open(), we need to back out any state that we've built up ... Signed-off-by: NCasey Leedom <leedom@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
-
由 Florian Westphal 提交于
broute table init hook sets up the "br_should_route_hook" pointer, which then gets called from br_input. commit a386f990 (bridge: add proper RCU annotation to should_route_hook) introduced a typedef, and then changed this to: br_should_route_hook_t *rhook; [..] rhook = rcu_dereference(br_should_route_hook); if (*rhook(skb)) problem is that "br_should_route_hook" contains the address of the function, so calling *rhook() results in kernel panic. Signed-off-by: NFlorian Westphal <fw@strlen.de> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Stephen Hemminger 提交于
The netlink interface to dump the connection tracking table has a race when entries are deleted at the same time. A customer reported a crash and the backtrace showed thatctnetlink_dump_table was running while a conntrack entry was being destroyed. (see https://bugzilla.vyatta.com/show_bug.cgi?id=6402). According to RCU documentation, when using hlist_nulls the reader must handle the case of seeing a deleted entry and not proceed further down the linked list. The old code would continue which caused the scan to walk into the free list. This patch uses locking (rather than RCU) for this operation which is guaranteed safe, and no longer requires getting reference while doing dump operation. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Dang Hongwu 提交于
skb_cow_data() may allocate a new data buffer, so pointers on skb should be set after this function. Bug was introduced by commit dff3bb06 ("ah4: convert to ahash") and 8631e9bd ("ah6: convert to ahash"). Signed-off-by: NWang Xuefu <xuefu.wang@6wind.com> Acked-by: NKrzysztof Witek <krzysztof.witek@6wind.com> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
For SHA256, RFC4868 requires to truncate ICV length to 128 bits, hence MAX_AH_AUTH_LEN should be updated to 16. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
Maximum trunc length is defined by MAX_AH_AUTH_LEN (in bytes) and need to be checked when this value is set (in bits) by the user. In ah4.c and ah6.c a BUG_ON() checks this condiftion. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Breno Leitao 提交于
Currently the skb array is not fully allocated, and the allocation is done as it's requested, which is not the expected way. This patch just allocate the full skb array at driver initialization. Also, this patch increases ehea version to 107. Signed-off-by: NBreno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shawn Guo 提交于
Signed-off-by: NShawn Guo <shawn.guo@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ken Kawasaki 提交于
pcnet_cs: add another ID of "corega Ether CF-TD" 10Base-T PCMCIA card. Signed-off-by: NKen Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
inet_csk_bind_conflict() logic currently disallows a bind() if it finds a friend socket (a socket bound on same address/port) satisfying a set of conditions : 1) Current (to be bound) socket doesnt have sk_reuse set OR 2) other socket doesnt have sk_reuse set OR 3) other socket is in LISTEN state We should add the CLOSE state in the 3) condition, in order to avoid two REUSEADDR sockets in CLOSE state with same local address/port, since this can deny further operations. Note : a prior patch tried to address the problem in a different (and buggy) way. (commit fda48a0d tcp: bind() fix when many ports are bound). Reported-by: NGaspar Chilingarov <gasparch@gmail.com> Reported-by: NDaniel Baluta <daniel.baluta@gmail.com> Tested-by: NDaniel Baluta <daniel.baluta@gmail.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 1月, 2011 17 次提交
-
-
由 hayeswang 提交于
Update rtl_phy_write_fw function. The new function could parse the complex firmware which is used by RTL8111E and later. The new firmware may read data and do some operations, not just do writing only. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Changli Gao 提交于
Signed-off-by: NChangli Gao <xiaosuo@gmail.com> Reviewed-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kumar Sanghvi 提交于
Checks version field of IP in the receive path for GPRS/3G data and appropriately sets the value of skb->protocol. Signed-off-by: NSjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maxim Levitsky 提交于
IPv4 over firewire needs to be able to remove ARP entries from the ARP cache that belong to nodes that are removed, because IPv4 over firewire uses ARP packets for private information about nodes. This information becomes invalid as soon as node drops off the bus and when it reconnects, its only possible to start talking to it after it responded to an ARP packet. But ARP cache prevents such packets from being sent. Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
HTB takes into account skb is segmented in stats updates. Generalize this to all schedulers. They should use qdisc_bstats_update() helper instead of manipulating bstats.bytes and bstats.packets Add bstats_update() helper too for classes that use gnet_stats_basic_packed fields. Note : Right now, TCQ_F_CAN_BYPASS shortcurt can be taken only if no stab is setup on qdisc. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Changed driver to call alloc_etherdev_mqs so that the number of TX and RX queues can be set to correct values in the netdev device. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Added alloc_netdev_mqs function which allows the number of transmit and receive queues to be specified independenty. alloc_netdev_mq was changed to a macro to call the new function. Also added alloc_etherdev_mqs with same purpose. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Rosenberg 提交于
The size field should not be set until after the data is successfully copied in. Signed-off-by: NDan Rosenberg <drosenberg@vsecurity.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Casey Leedom 提交于
For the VFs, the Mailbox Data "registers" are actually backed by T4's "MA" interface rather than PL Registers (as is the case for the PFs). Because these are in different coherency domains, the write to the VF's PL-register-backed Mailbox Control can race in front of the writes to the MA-backed VF Mailbox Data "registers". So we need to do a read-back on at least one byte of the VF Mailbox Data registers before doing the write to the VF Mailbox Control register. Signed-off-by: NCasey Leedom <leedom@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 amit salecha 提交于
o Updating module parameter after driver load is not supported except auto_fw_reset parameter. Changing these parameter after driver load, can have weird result. o Update driver version to 5.0.15. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
IRQ diag test was getting executed only when both register test and link test passed. The test should get executed if ETH_TEST_FL_OFFLINE flag is set. Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 amit salecha 提交于
Driver is reading flash fw version from defined address, this address may be invalid. Indeed Driver should read address for fw version through flash layout table. Flash layout table has defined region and address for fw version address should be read from fw image region. Driver has check for old firmware, this bug can cause driver load fail. This patch will try to read fw version from flash image region, if that fails, read from defined address. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
Dan Rosenberg pointed out that there were some signed comparison bugs in the phonet protocol. http://marc.info/?l=full-disclosure&m=129424528425330&w=2 The problem is that we check for array overflows but "protocol" is signed and we don't check for array underflows. If you have already have CAP_SYS_ADMIN then you could use the bugs to get root, or someone could cause an oops by mistake. Signed-off-by: NDan Carpenter <error27@gmail.com> Acked-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sonic Zhang 提交于
With writeback caches, corrupted RX packets will be sent up the stack without any error markings. Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mike Frysinger 提交于
We don't use this local "Mac" data anywhere (since we rely on the netdev's storage), so punt it. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mike Frysinger 提交于
No need for this to be exported since it is only used in this driver. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-