- 29 3月, 2017 4 次提交
-
-
由 Daniel Vetter 提交于
Nouveau had a few direct calls to ->disable_plane, I replaced those with drm_plane_force_disable. Same story for shmob. Otherwise no code changes. Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-5-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
Just rolling it out, no code change here. Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Rob Clark <robdclark@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Eric Anholt <eric@anholt.net> Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-3-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
Mostly because I want the links from the newly-added @state functions to work. But I think explaining when they're useful and that the implicit one is deprecated is good either way. Slightly repetitive unfortunately. Cc: Harry Wentland <harry.wentland@amd.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170328155349.5972-3-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
The rules are getting real hard, better to dump my brain into text a bit. This is by far not complete, but I think I reasonable start at least. Some of the older kms structures would need a full doc review anyway ... Cc: Harry Wentland <harry.wentland@amd.com> Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170328155349.5972-2-daniel.vetter@ffwll.ch
-
- 28 3月, 2017 1 次提交
-
-
由 Shashank Sharma 提交于
This patch adds description about 'scdc' variable in drm_hdmi_info structure, to fix this warning during doc-build. "drm_connector.h:140: warning: No description found for parameter 'scdc'" V2: Rebase V3: Added extra * V4: Removed merged conflict V5: Removed extra line at start of structure (Daniel) V6: Make description single line (Daniel) Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: NShashank Sharma <shashank.sharma@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1490684779-21633-1-git-send-email-shashank.sharma@intel.com
-
- 27 3月, 2017 2 次提交
-
-
由 Daniel Vetter 提交于
The trouble here is that it does multiple atomic commits under one drm_modeset_lock_all, which breaks the behind-the-scenes acquire context magic that function pulls off. It's much better to have one overall atomic commit. That we still have multiple atomic commits prevents us from adding some pretty useful debug checks to the atomic machinery. Hence it is really a bad idea to call the legacy drm_crtc_force_disable_all() function. There's 2 atomic drivers using this still, nouveau and tinydrm. To fix this, introduce a new drm_atomic_helper_shutdown() by extracting the code from i915. While at it improve kernel-doc and catch future offenders by sprinkling a WARN_ON into the legacy function. We should probably move those into the legacy modeset helpers, too ... v2: Make it compile on arm drivers too (Noralf). v3: Correct kerneldoc to point at _disable_all(). Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: NNoralf Trønnes <noralf@tronnes.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Ben Skeggs <bskeggs@redhat.com> Tested-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170321164149.31531-1-daniel.vetter@ffwll.ch
-
由 Noralf Trønnes 提交于
drm_driver.fops can't be shared since the owner then becomes tinydrm.ko. Move the fops declaration to the driver. v2: Use DEFINE_DRM_GEM_CMA_FOPS Reported-by: NDaniel Vetter <daniel.vetter@intel.com> Signed-off-by: NNoralf Trønnes <noralf@tronnes.org> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170326142529.16938-1-noralf@tronnes.org
-
- 26 3月, 2017 2 次提交
-
-
由 Daniel Vetter 提交于
The core code doesn't care at all about this, it's entirely dead. Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170322083617.13361-11-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
To match the drm_ioctl.c we already have. v2: Remove spurious space (Ville). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
-
- 24 3月, 2017 4 次提交
-
-
由 Daniel Vetter 提交于
I've decided to not document drm_debugfs_remove_files, it's on the way out. The biggest part is a huge todo.rst entry with what all should be improved. v2: Nits from Gabriel. Cc: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Reviewed-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170322205401.24897-1-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
This was missed in Tomeu's patch. Also remove the kerneldoc for the internal function, we don't document that in general. While at it word-smith the docs slightly for more clarity. Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: NTomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170322083617.13361-4-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
Doc polish will follow in the next patch. v2: Put the include guard #endif at the end (Ville). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170322205336.24549-1-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
It's the default storage class for functions, entirely redundant. And a lot of these headers are a bit inconsistent due to organically grown. Reviewed-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170322083617.13361-2-daniel.vetter@ffwll.ch
-
- 23 3月, 2017 5 次提交
-
-
由 Jani Nikula 提交于
Fix sparse warning: drivers/gpu/drm/drm_scdc_helper.c:138:6: warning: symbol 'drm_scdc_get_scrambling_status' was not declared. Should it be static? Fixes: 62c58af3 ("drm/edid: detect SCDC support in HF-VSDB") Cc: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: NShashank Sharma <shashank.sharma@intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1490193218-24806-1-git-send-email-jani.nikula@intel.com
-
由 Pandiyan, Dhinakaran 提交于
drm_dp_mst_allocate_vcpi() apart from setting up the vcpi structure, also finds if there are enough slots available. This check is a duplicate of that implemented in drm_dp_mst_find_vcpi_slots(). Let's move this check out and reuse the existing drm_dp_mst_find_vcpi_slots() function to check if there are enough vcpi slots before allocating them. This brings the check to one place. Additionally drivers that will use MST state tracking for atomic modesets can use the atomic version of find_vcpi_slots() and reuse drm_dp_mst_allocate_vcpi() Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: NDave Airlie <airlied@redhat.com> Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1489648231-30700-4-git-send-email-dhinakaran.pandiyan@intel.com
-
由 Pandiyan, Dhinakaran 提交于
The avail_slots member in the MST topology manager is never updated to reflect the available vcpi slots. The check is effectively against total slots, 63. So, let's make that check obvious and remove avail_slots. While at it, make debug messages more descriptive. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Archit Taneja <architt@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Harry Wentland <Harry.wentland@amd.com> Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1489648231-30700-3-git-send-email-dhinakaran.pandiyan@intel.com
-
由 Pandiyan, Dhinakaran 提交于
The total vcpi time slots is always 63 and does not depend on the link BW, remove total_slots from MST topology manager struct. The next change is to remove total_pbn which is hardcoded to 2560. The total PBN that the topology manager allocates from depends on the link rate and is not a constant. So, fix this by removing the total_pbn member itself. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Archit Taneja <architt@codeaurora.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Harry Wentland <Harry.wentland@amd.com> Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1489648231-30700-2-git-send-email-dhinakaran.pandiyan@intel.com
-
由 Ville Syrjälä 提交于
Allow drivers to return a custom drm_format_info structure for special fb layouts. We'll use this for the compression control surface in i915. v2: Fix drm_get_format_info() kernel doc (Laurent) Don't pass 'dev' to the new hook (Laurent) v3: s/compresssion/compression/ (Ben) Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Jason Ekstrand <jason@jlekstrand.net> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NBen Widawsky <ben@bwidawsk.net> Link: http://patchwork.freedesktop.org/patch/msgid/20170321181218.10042-4-ville.syrjala@linux.intel.com
-
- 21 3月, 2017 4 次提交
-
-
由 Shashank Sharma 提交于
This patch does following: - Adds a new structure (drm_hdmi_info) in drm_display_info. This structure will be used to save and indicate if sink supports advanced HDMI 2.0 features - Adds another structure drm_scdc within drm_hdmi_info, to reflect scdc support and capabilities in connected HDMI 2.0 sink. - Checks the HF-VSDB block for presence of SCDC, and marks it in scdc structure - If SCDC is present, checks if sink is capable of generating SCDC read request, and marks it in scdc structure. V2: Addressed review comments Thierry: - Fix typos in commit message and make abbreviation consistent across the commit message. - Change structure object name from hdmi_info -> hdmi - Fix typos and abbreviations in description of structure drm_hdmi_info end the description with a full stop. - Create a structure drm_scdc, and keep all information related to SCDC register set (supported, read request supported) etc in it. Ville: - Change rr -> read_request - Call drm_detect_scrambling function drm_parse_hf_vsdb so that all of HF-VSDB parsing can be kept in same function, in incremental patches. V3: Rebase. V4: Rebase. V5: Rebase. V6: Addressed review comments from Ville - Add clock rate calculations for 1/10 and 1/40 ratios - Remove leftovers from old patchset V7: Added R-B from Jose. V8: Rebase. V9: Rebase. V10: Rebase. Signed-off-by: NShashank Sharma <shashank.sharma@intel.com> Reviewed-by: NThierry Reding <treding@nvidia.com> Reviewed-by: NJose Abreu <joabreu@synopsys.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-5-git-send-email-shashank.sharma@intel.com
-
由 Shashank Sharma 提交于
This patch does following: - Adds a new structure (drm_hdmi_info) in drm_display_info. This structure will be used to save and indicate if sink supports advanced HDMI 2.0 features - Adds another structure drm_scdc within drm_hdmi_info, to reflect scdc support and capabilities in connected HDMI 2.0 sink. - Checks the HF-VSDB block for presence of SCDC, and marks it in scdc structure - If SCDC is present, checks if sink is capable of generating SCDC read request, and marks it in scdc structure. V2: Addressed review comments Thierry: - Fix typos in commit message and make abbreviation consistent across the commit message. - Change structure object name from hdmi_info -> hdmi - Fix typos and abbreviations in description of structure drm_hdmi_info end the description with a full stop. - Create a structure drm_scdc, and keep all information related to SCDC register set (supported, read request supported) etc in it. Ville: - Change rr -> read_request - Call drm_detect_scrambling function drm_parse_hf_vsdb so that all of HF-VSDB parsing can be kept in same function, in incremental patches. V3: Rebase. V4: Rebase. V5: Rebase. V6: Rebase. V7: Added R-B from Jose. V8: Rebase. V9: Rebase. V10: Rebase. Signed-off-by: NShashank Sharma <shashank.sharma@intel.com> Reviewed-by: NThierry Reding <treding@nvidia.com> Reviewed-by: NJose Abreu <joabreu@synopsys.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-4-git-send-email-shashank.sharma@intel.com
-
由 Thierry Reding 提交于
This patch implements a small function that finds if a given CEA db is hdmi-forum vendor specific data block or not. V2: Rebase. V3: Added R-B from Jose. V4: Rebase V5: Rebase V6: Rebase V7: Rebase V8: Rebase V9: Rebase V10: Rebase Signed-off-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NShashank Sharma <shashank.sharma@intel.com> Reviewed-by: NJose Abreu <joabreu@synopsys.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-3-git-send-email-shashank.sharma@intel.com
-
由 Thierry Reding 提交于
SCDC is a mechanism defined in the HDMI 2.0 specification that allows the source and sink devices to communicate. This commit introduces helpers to access the SCDC and provides the symbolic names for the various registers defined in the specification. V2: Rebase. V3: Added R-B from Jose. V4: Rebase V5: Addressed review comments from Ville - Handle the I2c return values in a better way (dp_dual_mode) - Make the macros for SCDC Major/Minor more readable, by adding a 'GET' in the macro names V6: Rebase V7: Rebase V8: Rebase V9: Rebase V10: Rebase Signed-off-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NShashank Sharma <shashank.sharma@intel.com> Reviewed-by: NJose Abreu <joabreu@synopsys.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-2-git-send-email-shashank.sharma@intel.com
-
- 19 3月, 2017 2 次提交
-
-
由 Mike Christie 提交于
The implicit transition time tells initiators the min time to wait before timing out a transition. We currently schedule the transition to occur in tg_pt_gp_implicit_trans_secs seconds so there is no room for delays. If core_alua_do_transition_tg_pt_work->core_alua_update_tpg_primary_metadata needs to write out info to a remote file, then the initiator can easily time out the operation. Signed-off-by: NMike Christie <mchristi@redhat.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Mike Christie 提交于
This patch allows passthrough backends to use the core/base LIO ALUA setup and state checks, but still handle the execution of commands. This will allow the target_core_user module to execute STPG and RTPG in userspace, and not have to duplicate the ALUA state checks, path information (needed so we can check if command is executable on specific paths) and setup (rtslib sets/updates the configfs ALUA interface like it does for iblock or file). For STPG, the target_core_user userspace daemon, tcmu-runner will still execute the STPG, and to update the core/base LIO state it will use the existing configfs interface. For RTPG, tcmu-runner will loop over configfs and/or cache the state. Signed-off-by: NMike Christie <mchristi@redhat.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
- 18 3月, 2017 2 次提交
-
-
由 Philipp Zabel 提交于
Add a helper to check if all fences in a fence array are from a given context. For convenience, the function can also handle being given a non-array fence. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.com> Acked-by: NSumit Semwal <sumit.semwal@linaro.org> Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/1489768492-25190-1-git-send-email-p.zabel@pengutronix.de
-
由 Chris Wilson 提交于
To improve our historical record and to simplify userspace that wants to include i915_pciids.h as its canonical breakdown of PCI IDs and their respective generations, include the gen1 ids for i810 and i815. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170313112810.4202-1-chris@chris-wilson.co.ukAcked-by: NJani Nikula <jani.nikula@intel.com>
-
- 17 3月, 2017 2 次提交
-
-
由 Heiko Carstens 提交于
The last caller of assert_held_device_hotplug() is gone, so remove it again. Link: http://lkml.kernel.org/r/20170314125226.16779-3-heiko.carstens@de.ibm.comSigned-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Acked-by: NDan Williams <dan.j.williams@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Masami Hiramatsu 提交于
Add a prototype of task_struct to fix below warning on arm64. In file included from arch/arm64/kernel/probes/kprobes.c:19:0: include/linux/kasan.h:81:132: error: 'struct task_struct' declared inside parameter list will not be visible outside of this definition or declaration [-Werror] static inline void kasan_unpoison_task_stack(struct task_struct *task) {} As same as other types (kmem_cache, page, and vm_struct) this adds a prototype of task_struct data structure on top of kasan.h. [arnd] A related warning was fixed before, but now appears in a different line in the same file in v4.11-rc2. The patch from Masami Hiramatsu still seems appropriate, so let's take his version. Fixes: 71af2ed5 ("kasan, sched/headers: Remove <linux/sched.h> from <linux/kasan.h>") Link: https://patchwork.kernel.org/patch/9569839/ Link: http://lkml.kernel.org/r/20170313141517.3397802-1-arnd@arndb.deSigned-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org> Acked-by: NAlexander Potapenko <glider@google.com> Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 3月, 2017 1 次提交
-
-
由 Lucas Stach 提交于
This adds support for the i.MX6 QUadPlus PRG unit. It glues together the IPU and the PRE units. Signed-off-by: NLucas Stach <l.stach@pengutronix.de> Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> --- v4: add missing ipu_soc->prg_priv
-
- 15 3月, 2017 3 次提交
-
-
由 Philipp Zabel 提交于
The IPUv3 can read 8-bit alpha values from a separate IDMAC channel driven by the Alpha Transparency Controller (ATC) for the graphics IDMAC channels. This allows to reduce memory bandwidth via a conditional read mechanism or to support planar YUV formats with alpha transparency. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
由 Philipp Zabel 提交于
Some hardware can read the alpha components separately and then conditionally fetch color components only for non-zero alpha values. This patch adds fourcc definitions for two-plane RGB formats with an 8-bit alpha channel on a second plane. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
-
由 Philipp Zabel 提交于
When disabling the foreground DP channel during a modeset, the DC is already disabled without waiting for end of frame. There is no reason to wait for a frame boundary before updating the DP registers in that case. Add support to apply updates immediately. No functional changes, yet. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Reviewed-by: NLucas Stach <l.stach@pengutronix.de>
-
- 14 3月, 2017 4 次提交
-
-
由 Daniel Vetter 提交于
Sadly there's only 1 driver which can use it, everyone else is special for some reason: - gma500 has a horrible runtime PM ioctl wrapper that probably doesn't really work but meh. - i915 needs special compat_ioctl handler because regrets. - arcgpu needs to fixup the pgprot because (no idea why it can't do that in the fault handler like everyone else). - tegra does even worse stuff with pgprot - udl does something with vm_flags too ... - cma helpers, etnaviv, mtk, msm, rockchip, omap all implement some variation on prefaulting. - exynos is exynos, I got lost in the midlayers. - vc4 has to reinvent half of cma helpers because those are too much midlayer, plus vm_flags dances. - vgem also seems unhappy with the default vm_flags. So pretty sad divergence and I'm sure we could do better, but not really an idea. Oh well, maybe this macro here helps to encourage more consistency at least going forward. Reviewed-by: NSean Paul <seanpaul@chromium.org> Reviewed-by: NLiviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-25-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
Less code ftw. This converts all drivers except the tinydrm helper module. That one needs more work, since it gets the THIS_MODULE reference from tinydrm.ko instead of the actual driver module like it should. Probably needs a similar trick like I used here with generating the entire struct with a macro. Cc: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: NSean Paul <seanpaul@chromium.org> Reviewed-by: NLiviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-24-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
Well, mostly drm_file.h, and clean up all related things: - I didnt' figure out the difference between preclose and postclose. The existing explanation in drm-internals.rst didn't convince me, since it's also really outdated - we clean up pending DRM events in the core nowadays. I put a FIXME in for the future. - Another FIXME is to have a macro for default fops. - Lots of links all around, main areas are to tie the overview in drm_file.c more into the callbacks in struct drm_device, and the other is to link render/primary node code to the right sections in drm-uapi.rst. - Also moved the open/close stuff to drm_drv.h from drm-internals.rst, seems like the better place for that information. Since that section was rather outdated this amounted to full-on rewrite. A big missing piece here is some overview graph, but I think better to wait with that one until drm_device and drm_driver are also fully documented. v2: Nits from Sean. Reviewed-by: NSean Paul <seanpaul@chromium.org> Reviewed-by: NLiviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-12-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
We might as well dump the drm_file pointer, that's about as useful a cookie as the pid. Noticed while typing docs for drm_file and friends. Since the only consumer of this is the tracepoints I think we can safely change this - those tracepoints should not be uapi relevant at all. It all goes back to commit b9c2c9ae Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Thu Jul 1 16:48:09 2010 -0700 drm: add per-event vblank event trace points which doesn't give a special justification for using pid over a pointer. Also note that the nouveau code setting it is entirely pointless: Since this isn't a vblank event, it will never hit the vblank tracepoints. Cc: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: NSean Paul <seanpaul@chromium.org> Reviewed-by: NLiviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-11-daniel.vetter@ffwll.ch
-
- 13 3月, 2017 2 次提交
-
-
由 Dmitry V. Levin 提交于
Consistently use types from linux/types.h like in other uapi drm/*_drm.h header files to fix the following drm/omap_drm.h userspace compilation errors: /usr/include/drm/omap_drm.h:36:2: error: unknown type name 'uint64_t' uint64_t param; /* in */ /usr/include/drm/omap_drm.h:37:2: error: unknown type name 'uint64_t' uint64_t value; /* in (set_param), out (get_param) */ /usr/include/drm/omap_drm.h:56:2: error: unknown type name 'uint32_t' uint32_t bytes; /* (for non-tiled formats) */ /usr/include/drm/omap_drm.h:58:3: error: unknown type name 'uint16_t' uint16_t width; /usr/include/drm/omap_drm.h:59:3: error: unknown type name 'uint16_t' uint16_t height; /usr/include/drm/omap_drm.h:65:2: error: unknown type name 'uint32_t' uint32_t flags; /* in */ /usr/include/drm/omap_drm.h:66:2: error: unknown type name 'uint32_t' uint32_t handle; /* out */ /usr/include/drm/omap_drm.h:67:2: error: unknown type name 'uint32_t' uint32_t __pad; /usr/include/drm/omap_drm.h:77:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:78:2: error: unknown type name 'uint32_t' uint32_t op; /* mask of omap_gem_op (in) */ /usr/include/drm/omap_drm.h:82:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:83:2: error: unknown type name 'uint32_t' uint32_t op; /* mask of omap_gem_op (in) */ /usr/include/drm/omap_drm.h:88:2: error: unknown type name 'uint32_t' uint32_t nregions; /usr/include/drm/omap_drm.h:89:2: error: unknown type name 'uint32_t' uint32_t __pad; /usr/include/drm/omap_drm.h:93:2: error: unknown type name 'uint32_t' uint32_t handle; /* buffer handle (in) */ /usr/include/drm/omap_drm.h:94:2: error: unknown type name 'uint32_t' uint32_t pad; /usr/include/drm/omap_drm.h:95:2: error: unknown type name 'uint64_t' uint64_t offset; /* mmap offset (out) */ /usr/include/drm/omap_drm.h:102:2: error: unknown type name 'uint32_t' uint32_t size; /* virtual size for mmap'ing (out) */ /usr/include/drm/omap_drm.h:103:2: error: unknown type name 'uint32_t' uint32_t __pad; Fixes: ef6503e8 ("drm: Kbuild: add omap_drm.h to the installed headers") Signed-off-by: NDmitry V. Levin <ldv@altlinux.org> Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
-
由 Daniel Borkmann 提交于
Improve bpf_{prog,jit_binary}_{un,}lock_ro() by throwing a one-time warning in case of an error when the image couldn't be set read-only, and also mark struct bpf_prog as locked when bpf_prog_lock_ro() was called. Reason for the latter is that bpf_prog_unlock_ro() is called from various places including error paths, and we shouldn't mess with page attributes when really not needed. For bpf_jit_binary_unlock_ro() this is not needed as jited flag implicitly indicates this, thus for archs with ARCH_HAS_SET_MEMORY we're guaranteed to have a previously locked image. Overall, this should also help us to identify any further potential issues with set_memory_*() helpers. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 3月, 2017 2 次提交
-
-
由 Dou Liyang 提交于
The check for duplicate processor ids happens at boot time based on the ACPI table contents, but the final sanity checks for a processor happen at hotplug time. At hotplug time, where the physical information is available, which might differ from the ACPI table information, a check for duplicate processor ids is missing. Add it to the hotplug checks and rename the function so it better reflects its purpose. Signed-off-by: NDou Liyang <douly.fnst@cn.fujitsu.com> Tested-by: NXiaolong Ye <xiaolong.ye@intel.com> Cc: rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Cc: guzheng1@huawei.com Cc: izumi.taku@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1488528147-2279-6-git-send-email-douly.fnst@cn.fujitsu.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Dou Liyang 提交于
Revert: dc6db24d ("x86/acpi: Set persistent cpuid <-> nodeid mapping when booting") The mapping of "cpuid <-> nodeid" is established at boot time via ACPI tables to keep associations of workqueues and other node related items consistent across cpu hotplug. But, ACPI tables are unreliable and failures with that boot time mapping have been reported on machines where the ACPI table and the physical information which is retrieved at actual hotplug is inconsistent. Revert the mapping implementation so it can be replaced with a less error prone approach. Signed-off-by: NDou Liyang <douly.fnst@cn.fujitsu.com> Tested-by: NXiaolong Ye <xiaolong.ye@intel.com> Cc: rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Cc: guzheng1@huawei.com Cc: izumi.taku@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1488528147-2279-2-git-send-email-douly.fnst@cn.fujitsu.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-