The node module has a node_init() and a node_exit() whose only purpose
is to keep a reference counting which is not used at all.

This patch removes these functions and the reference count variable.

There is no functional changes.
Signed-off-by: NVíctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The proc module has a proc_init() and a proc_exit() whose only purpose
is to keep a reference counting which is not used at all.

This patch removes these functions and the reference count variable.

There is no functional changes.
Signed-off-by: NVíctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The cod module has a cod_init() and a cod_exit() whose only purpose is
to keep a reference counting which is not used at all.

This patch removes these functions and the reference count variable.

There is no functional changes.
Signed-off-by: NVíctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The drv module has a drv_init() and a drv_exit() whose only purpose is
to keep a reference counting which is not used at all.

This patch removes these functions and the reference count variable.

There is no functional changes.
Signed-off-by: NVíctor Manuel Jáquez Leal <vjaquez@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

binder_update_page_range could read freed memory if the vma of the
selected process was freed right before the check that the vma
belongs to the mm struct it just locked.

If the vm_mm pointer in that freed vma struct had also been rewritten
with a value that matched the locked mm struct, then the code would
proceed and possibly modify the freed vma.
Signed-off-by: NArve Hjønnevåg <arve@android.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

WARNING: vmlinux.o(.text+0xfcf6e): Section mismatch in reference
from the function ram_console_driver_probe() to the function
.init.text:persistent_ram_init_ringbuffer()
The function ram_console_driver_probe() references
the function __init persistent_ram_init_ringbuffer().
This is often because ram_console_driver_probe lacks a __init
annotation or the annotation of persistent_ram_init_ringbuffer is
wrong.

Move this driver to platform_driver_probe() because ram console
devices aren't going to be added and removed at runtime. Also
shorten the probe function name since driver is redundant and
makes the function name long.

Cc: Android Kernel Team <kernel-team@android.com>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following spelling errors:
inital -> initial
continous -> continuous
aquisition -> acquisition
aquisitions -> acquisitions
immidiately -> immediately
Signed-off-by: NAlexandru Guduleasa <alexandru.guduleasa@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct spelling "interal" to "internal" in
drivers/staging/crystalhd/crystalhd_hw.c
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The Linux kernel has a setting called dmesg_restrict. When true,
only processes with CAP_SYSLOG can view the kernel dmesg logs. This
helps prevent leaking of kernel information into user space.

On Android, it's possible to bypass these restrictions by viewing
/proc/last_kmsg.

This change makes /proc/last_kmsg require the same permissions as
dmesg.

CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: NNick Kralevich <nnk@google.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If the persistent ram buffer is not available, ram_console_late_init
would crash when dereferencing ram_console_zone.  Return early if
ram console was not initialized.

CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: NColin Cross <ccross@android.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add the notrace attribute to persistent_ram_write and the
non-ecc functions that it calls to allow persistent_ram to
be used for ftracing (only when ecc is disabled).

CC: Greg KH <gregkh@linuxfoundation.org>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: NColin Cross <ccross@android.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Allow persistent_ram_write to be called on multiple cpus at
the same time, as long as ecc is not in use.  Uses atomics
for the buffer->start and buffer->size counters.

[jstultz: Fix up some pr_info casting issues on 64bit]
CC: Greg KH <gregkh@linuxfoundation.org>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: NColin Cross <ccross@android.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace the ioremapped memory passed in from the drivers with
a memblock_reserve and vmap.  Adds a new function,
persistent_ram_early_init, designed to be called from the machine
init_early callback, that calls memblock_remove and saves the
provided persistent ram area layout.

Drivers only pass in their struct device * and ecc settings.
Locating and mapping the memory is now handled entirely within
persistent_ram.

Also, convert ram_console to the new persistent_ram_init
parameters that only take a struct device * and ecc settings.

[jstultz: Fix pr_info casting issues on 64bit, folded two
patches as the build breaks if they are apart. Also replaced
phys_to_page() w/ pfn_to_page(addr>>PAGE_SHIFT), as phys_to_page
is only on a few arches.]
CC: Greg KH <gregkh@linuxfoundation.org>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: NColin Cross <ccross@android.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION and related
 #ifdefs.  Also allow persistent ram zones without ecc enabled.
For some use cases, like the data portion of the upcoming
persistent_vars patches, or a persistent ftrace ringbuffer,
ecc on every update is too expensive.

CC: Greg KH <gregkh@linuxfoundation.org>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: NColin Cross <ccross@android.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Split ram_console into two halves.

persistent_ram is a set of apis that handle a block of memory
that does not get erased across a reboot.  It provides functions
to fill it as a single buffer or a ring buffer, and to extract
the old data after a reboot.  It handles ecc on the data to
correct bit errors introduced during reboot.

ram_console is now a small wrapper around persistent_ram that
feeds console data into the ringbuffer, and exports the old
data to /proc/last_kmsg after a reboot.

[jstultz: Moved persistent_ram.h to staging dir]
CC: Greg KH <gregkh@linuxfoundation.org>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: NColin Cross <ccross@android.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Equivalent functionality can be obtained with loglevel=15

CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: NColin Cross <ccross@android.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Early ramconsole is not very useful, an early crash will prevent
getting the logged data out on the next boot, and CONFIG_DEBUG_LL=y
will get the same information.  Drop it to simplify a future
refactoring.

CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: NColin Cross <ccross@android.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Don't store the bootinfo string and the ecc status string with
the recovered old log data.  This will simplify refactoring the
persistent ram code out of the ram console code later.

CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: NColin Cross <ccross@android.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We want to ensure that we get all the console messages, even ones
that occur while the printing CPU is not yet online.

[jstultz: tweaked commit subject line]
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: NDima Zavin <dima@android.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In mei_irq_thread_read_bus_message we reused mei_hdr
allocated on read buffer to write the stop message.
There is no bug associated with this but for code
clarity we use write buffer also for message header.
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Deal with the case of buffers with virtual stride larger than one
page in fault_2d().
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch splits the DMM off into a separate sub-device, in order to
utilize the platform device information that was created as part of
the OMAP hwmod entry for the DMM.

The driver probe function queries the iomem resource and IRQ using
standard platform_get functions.

The OMAP DRM driver now calls the platform_driver_register() function
for the subordinate DMM driver inside its probe function.  This
guarantees the required order for the DMM and ensures the DMM resources
are available for use by the DRM driver.
Signed-off-by: NAndy Gross <andy.gross@ti.com>
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Added check for valid device information before dumping debugfs
information.
Signed-off-by: NAndy Gross <andy.gross@ti.com>
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

OMAP3 does not contain a DMM/Tiler block.  As such, we should not
be exposing any DMM debugfs entries on OMAP3 platforms.

Added inline helper function to verify existence of DMM.
Signed-off-by: NAndy Gross <andy.gross@ti.com>
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add some additional debugfs file to aid in tracking buffer usage.
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When flipping, defer unpinning until scanout completes, as indicated
by the appropriate END_WIN irq.

This also re-organizes things a bit, in replacing omap_fb_{pin,unpin}
with omap_fb_replace(), to make it easier to add support for scanout
synchronized DMM refill mode (flipping by just reprogramming DMM
synchronized with DSS scanout).
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that 'struct drm_plane' has a pixel_format field, use that.  And
fix a minor typo.
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If fbcon calls us from atomic context, push the work off to the
workqueue to avoid calling into the gem/dmm code in an atomic
context.
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a workqueue for omapdrm driver, which is needed for at least a
couple things currently: (1) moving omap_gem_roll() to a non-atomic
context, (2) synchronizing page flips w/ DSS scanout related irq's
(in particular not unmapping previous buffer until DSS finishes
scanout).
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Get the supported formats for a plane from ovl's supported_modes
bitmask.
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

tsl2563 probe function has two minor issues with it's error handling paths:
1) it is silent (did not report errors to dmesg)
2) did not return failure code (mixed up use of ret and err)

and two major issues:
3) goto fail2 would corrupt a free memory pool ("double free")
4) device registration failure did NOT cancel/flush delayed work.
   (and thus dereference a freed data structure later)

The "double free" is subtle and was introduced with this change:
    Author: Jonathan Cameron <jic23@cam.ac.uk>
    Date:   Mon Apr 18 12:58:55 2011 +0100
    staging:iio:tsl2563 take advantage of new iio_device_allocate private data.

Originally, chip was allocated seperately. Now it's appended to the
indio_dev by iio_allocate_device(sizeof(*chip)). So we only need one
kfree call as well (in iio_free_device()).

Gory details of tracking this down are here:
   http://crosbug.com/26819

Despite iio_device_registration failing, system can at least now boot.
Will follow up with a fix to "double register : in_intensity_both_raw"
error that is included in the bug report.
Signed-off-by: NGrant Grundler <grundler@chromium.org>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Reviewed-by: NBryan Freed <bfreed@chromium.org>
Reviewed-by: NBenson Leung <bleung@chromium.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The patch 2080913e: "staging: r8712u: Fix regression caused by
commit 8c213fa5" from Feb 25, 2012, leads to the following Smatch
complaint:

drivers/staging/rtl8712/usb_intf.c:629 r871xu_dev_remove()
	 warn: variable dereferenced before check 'padapter' (see line 625)

The fix is to move the new statements inside the block where padapter
is not NULL.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the SPARSEMEM from the zsmalloc
Kconfig
Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: NNitin Gupta <ngupta@vflare.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch ensures that the value of ZS_MIN_ALLOC_SIZE, for the
PAGE_SIZE and MAX_PHYSMEM_BITS on the system, allows for all
possible object ids in the lowest storage class to be encoded
in the object handle.
Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: NNitin Gupta <ngupta@vflare.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch provides a way to determine or "set a
reasonable value for" MAX_PHYSMEM_BITS in the case that
it is not defined (i.e. !SPARSEMEM)
Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: NNitin Gupta <ngupta@vflare.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch moves where max_zspage_order is declared and
changes its meaning.  "Order" typically implies 2^order
of something; however, it is currently being used as the
"maximum number of single pages in a zspage".  To add clarity,
ZS_MAX_ZSPAGE_ORDER is now used to calculate ZS_MAX_PAGES_PER_ZSPAGE,
which is 2^ZS_MAX_ZSPAGE_ORDER and is the upper bound on the number
of pages in a zspage.
Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: NNitin Gupta <ngupta@vflare.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch moves the definitions of _PFN_BITS, OBJ_INDEX_BITS
and OBJ_INDEX_MASK from zsmalloc-main.c to zsmalloc_int.h

They will be needed to determine ZS_MIN_ALLOC_SIZE in the next
patch
Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: NNitin Gupta <ngupta@vflare.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

zcache cannot currently be loaded as a module.  However
the Kconfig allows it to be built as a module; something that
the user probably does not intend since the module is not
loadable.

This patch switches zcache from a tristate to a bool in the Kconfig
Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: NDan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e553f182 ("staging: iio: core: Introduce debugfs support, add support
for direct register access") added a '#if defined(CONFIG_DEBUG_FS)' around
iio_read_channel_ext_info and iio_write_channel_ext_info causing the following
compile error if CONFIG_DEBUG_FS is not defined.

	drivers/staging/iio/industrialio-core.c:621:11: error: 'iio_read_channel_ext_info' undeclared (first use in this function)
	drivers/staging/iio/industrialio-core.c:623:11: error: 'iio_write_channel_ext_info' undeclared (first use in this function)

This patch fixes the issue by moving the functions out of the '#if
defined(CONFIG_DEBUG_FS)' section again.
Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix compiler warning about the type of the module parameter.

Cc: San Mehat <san@google.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>