Using raw_local_irq_save/restore confuses lockdep.
It's fine to use the normal ones.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Add notrace annotations to lockdep to keep ftrace from causing
recursive problems with lock tracing and debugging.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The irqsoff function tracer did a __get_cpu_var to determine
if it should trace the function or not. The problem is that
__get_cpu_var can preempt between getting the CPU and reading
the cpu variable. This means that the cpu variable that is
being read is not from the cpu being run on.

At worst, this can give a false positive, where we trace the
function when we should not.  It will never give a false negative
since we only want to trace when interrupts are disabled
and we never preempt when they are.

This fix adds a check after reading the irq flags to only
trace if the interrupts are actually disabled. It also changes
the reading of the cpu variable to use a raw_smp_processor_id
since we now don't care if we preempt. We still catch that fact.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The debug smp_processor_id caused a recursive fault in debugging
the irqsoff tracer. The tracer used a smp_processor_id in the
ftrace callback, and this function called preempt_disable which
also is traced. This caused a recursive fault (stack overload).

Since using smp_processor_id without debugging on does not cause
faults with the tracer (even when the tracer is wrong), the
debug version should not cause a system reboot.

This changes the debug_smp_processor_id to use the notrace versions
of preempt_disable and enable.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

disable the tracer while kexec pulls the rug from under the old
kernel.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Allocating large buffers for the tracer may fail easily.
This patch converts the buffer from a large ordered allocation
to single pages. It uses the struct page LRU field to link the
pages together.

Later patches may also implement dynamic increasing and decreasing
of the trace buffers.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch adds two files to the debugfs system:

 /debugfs/tracing/available_filter_functions

and

 /debugfs/tracing/set_ftrace_filter

The available_filter_functions lists all functions that has been
recorded by the ftraced that has called the ftrace_record_ip function.
This is to allow users to see what functions have been converted
to nops and can be enabled for tracing.

To enable functions, simply echo the names (whitespace delimited)
into set_ftrace_filter. Simple wildcards are also allowed.

echo 'scheduler' > /debugfs/tracing/set_ftrace_filter

Will have only the scheduler be activated when tracing is enabled.

echo 'sched_*' > /debugfs/tracing/set_ftrace_filter

Will have only the functions starting with 'sched_' be activated.

echo '*lock' > /debugfs/tracing/set_ftrace_filter

Will have only functions ending with 'lock' be activated.

echo '*lock*' > /debugfs/tracing/set_ftrace_filter

Will have only functions with 'lock' in its name be activated.

Note: 'sched*lock' will not work. The only wildcards that are
allowed is an asterisk and the beginning and or end of the string
passed in.

Multiple names can be passed in with whitespace delimited:

echo 'scheduler *lock *acpi*' > /debugfs/tracing/set_ftrace_filter

is also the same as:

echo 'scheduler' > /debugfs/tracing/set_ftrace_filter
echo '*lock' >> /debugfs/tracing/set_ftrace_filter
echo '*acpi*' >> /debugfs/tracing/set_ftrace_filter

Appending does just that. It appends to the list.

To disable all filters simply echo an empty line in:

echo > /debugfs/tracing/set_ftrace_filter
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch replaces the indirect call to the mcount function
pointer with a direct call that will be patched by the
dynamic ftrace routines.

On boot up, the mcount function calls the ftace_stub function.
When the dynamic ftrace code is initialized, the ftrace_stub
is replaced with a call to the ftrace_record_ip, which records
the instruction pointers of the locations that call it.

Later, the ftraced daemon will call kstop_machine and patch all
the locations to nops.

When a ftrace is enabled, the original calls to mcount will now
be set top call ftrace_caller, which will do a direct call
to the registered ftrace function. This direct call is also patched
when the function that should be called is updated.

All patching is performed by a kstop_machine routine to prevent any
type of race conditions that is associated with modifying code
on the fly.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch moves the memory management of the ftrace
records out of the arch code and into the generic code
making the arch code simpler.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch patches the call to mcount with nops instead
of a jmp over the mcount call.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch adds back the sysctl ftrace_enabled. This time it is
defaulted to on, if DYNAMIC_FTRACE is configured. When ftrace_enabled
is disabled, the ftrace function is set to the stub return.

If DYNAMIC_FTRACE is also configured, on ftrace_enabled = 0,
the registered ftrace functions will all be set to jmps, but no more
new calls to ftrace recording (used to find the ftrace calling sites)
will be called.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch adds a feature to dynamically replace the ftrace code
with the jmps to allow a kernel with ftrace configured to run
as fast as it can without it configured.

The way this works, is on bootup (if ftrace is enabled), a ftrace
function is registered to record the instruction pointer of all
places that call the function.

Later, if there's still any code to patch, a kthread is awoken
(rate limited to at most once a second) that performs a stop_machine,
and replaces all the code that was called with a jmp over the call
to ftrace. It only replaces what was found the previous time. Typically
the system reaches equilibrium quickly after bootup and there's no code
patching needed at all.

e.g.

  call ftrace  /* 5 bytes */

is replaced with

  jmp 3f  /* jmp is 2 bytes and we jump 3 forward */
3:

When we want to enable ftrace for function tracing, the IP recording
is removed, and stop_machine is called again to replace all the locations
of that were recorded back to the call of ftrace.  When it is disabled,
we replace the code back to the jmp.

Allocation is done by the kthread. If the ftrace recording function is
called, and we don't have any record slots available, then we simply
skip that call. Once a second a new page (if needed) is allocated for
recording new ftrace function calls.  A large batch is allocated at
boot up to get most of the calls there.

Because we do this via stop_machine, we don't have to worry about another
CPU executing a ftrace call as we modify it. But we do need to worry
about NMI's so all functions that might be called via nmi must be
annotated with notrace_nmi. When this code is configured in, the NMI code
will not call notrace.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Add preempt off timings. A lot of kernel core code is taken from the RT patch
latency trace that was written by Ingo Molnar.

This adds "preemptoff" and "preemptirqsoff" to /debugfs/tracing/available_tracers

Now instead of just tracing irqs off, preemption off can be selected
to be recorded.

When this is selected, it shares the same files as irqs off timings.
One can either trace preemption off, irqs off, or one or the other off.

By echoing "preemptoff" into /debugfs/tracing/current_tracer, recording
of preempt off only is performed. "irqsoff" will only record the time
irqs are disabled, but "preemptirqsoff" will take the total time irqs
or preemption are disabled. Runtime switching of these options is now
supported by simpling echoing in the appropriate trace name into
/debugfs/tracing/current_tracer.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch adds latency tracing for critical timings
(how long interrupts are disabled for).

 "irqsoff" is added to /debugfs/tracing/available_tracers

Note:
  tracing_max_latency
    also holds the max latency for irqsoff (in usecs).
   (default to large number so one must start latency tracing)

  tracing_thresh
    threshold (in usecs) to always print out if irqs off
    is detected to be longer than stated here.
    If irq_thresh is non-zero, then max_irq_latency
    is ignored.

Here's an example of a trace with ftrace_enabled = 0

=======
preemption latency trace v1.1.5 on 2.6.24-rc7
Signed-off-by: NIngo Molnar <mingo@elte.hu>
--------------------------------------------------------------------
 latency: 100 us, #3/3, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2)
    -----------------
    | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0)
    -----------------
 => started at: _spin_lock_irqsave+0x2a/0xb7
 => ended at:   _spin_unlock_irqrestore+0x32/0x5f

                 _------=> CPU#
                / _-----=> irqs-off
               | / _----=> need-resched
               || / _---=> hardirq/softirq
               ||| / _--=> preempt-depth
               |||| /
               |||||     delay
   cmd     pid ||||| time  |   caller
      \   /    |||||   \   |   /
 swapper-0     1d.s3    0us+: _spin_lock_irqsave+0x2a/0xb7 (e1000_update_stats+0x47/0x64c [e1000])
 swapper-0     1d.s3  100us : _spin_unlock_irqrestore+0x32/0x5f (e1000_update_stats+0x641/0x64c [e1000])
 swapper-0     1d.s3  100us : trace_hardirqs_on_caller+0x75/0x89 (_spin_unlock_irqrestore+0x32/0x5f)

vim:ft=help
=======

And this is a trace with ftrace_enabled == 1

=======
preemption latency trace v1.1.5 on 2.6.24-rc7
--------------------------------------------------------------------
 latency: 102 us, #12/12, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2)
    -----------------
    | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0)
    -----------------
 => started at: _spin_lock_irqsave+0x2a/0xb7
 => ended at:   _spin_unlock_irqrestore+0x32/0x5f

                 _------=> CPU#
                / _-----=> irqs-off
               | / _----=> need-resched
               || / _---=> hardirq/softirq
               ||| / _--=> preempt-depth
               |||| /
               |||||     delay
   cmd     pid ||||| time  |   caller
      \   /    |||||   \   |   /
 swapper-0     1dNs3    0us+: _spin_lock_irqsave+0x2a/0xb7 (e1000_update_stats+0x47/0x64c [e1000])
 swapper-0     1dNs3   46us : e1000_read_phy_reg+0x16/0x225 [e1000] (e1000_update_stats+0x5e2/0x64c [e1000])
 swapper-0     1dNs3   46us : e1000_swfw_sync_acquire+0x10/0x99 [e1000] (e1000_read_phy_reg+0x49/0x225 [e1000])
 swapper-0     1dNs3   46us : e1000_get_hw_eeprom_semaphore+0x12/0xa6 [e1000] (e1000_swfw_sync_acquire+0x36/0x99 [e1000])
 swapper-0     1dNs3   47us : __const_udelay+0x9/0x47 (e1000_read_phy_reg+0x116/0x225 [e1000])
 swapper-0     1dNs3   47us+: __delay+0x9/0x50 (__const_udelay+0x45/0x47)
 swapper-0     1dNs3   97us : preempt_schedule+0xc/0x84 (__delay+0x4e/0x50)
 swapper-0     1dNs3   98us : e1000_swfw_sync_release+0xc/0x55 [e1000] (e1000_read_phy_reg+0x211/0x225 [e1000])
 swapper-0     1dNs3   99us+: e1000_put_hw_eeprom_semaphore+0x9/0x35 [e1000] (e1000_swfw_sync_release+0x50/0x55 [e1000])
 swapper-0     1dNs3  101us : _spin_unlock_irqrestore+0xe/0x5f (e1000_update_stats+0x641/0x64c [e1000])
 swapper-0     1dNs3  102us : _spin_unlock_irqrestore+0x32/0x5f (e1000_update_stats+0x641/0x64c [e1000])
 swapper-0     1dNs3  102us : trace_hardirqs_on_caller+0x75/0x89 (_spin_unlock_irqrestore+0x32/0x5f)

vim:ft=help
=======
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch adds the tracer that tracks the wakeup latency of the
highest priority waking task.

  "wakeup" is added to /debugfs/tracing/available_tracers

Also added to /debugfs/tracing

  tracing_max_latency
     holds the current max latency for the wakeup

  wakeup_thresh
     if set to other than zero, a log will be recorded
     for every wakeup that takes longer than the number
     entered in here (usecs for all counters)
     (deletes previous trace)

Examples:

  (with ftrace_enabled = 0)

============
preemption latency trace v1.1.5 on 2.6.24-rc8
Signed-off-by: NIngo Molnar <mingo@elte.hu>
--------------------------------------------------------------------
 latency: 26 us, #2/2, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2)
    -----------------
    | task: migration/0-3 (uid:0 nice:-5 policy:1 rt_prio:99)
    -----------------

                 _------=> CPU#
                / _-----=> irqs-off
               | / _----=> need-resched
               || / _---=> hardirq/softirq
               ||| / _--=> preempt-depth
               |||| /
               |||||     delay
   cmd     pid ||||| time  |   caller
      \   /    |||||   \   |   /
   quilt-8551  0d..3    0us+: wake_up_process+0x15/0x17 <ffffffff80233e80> (sched_exec+0xc9/0x100 <ffffffff80235343>)
   quilt-8551  0d..4   26us : sched_switch_callback+0x73/0x81 <ffffffff80338d2f> (schedule+0x483/0x6d5 <ffffffff8048b3ee>)

vim:ft=help
============

  (with ftrace_enabled = 1)

============
preemption latency trace v1.1.5 on 2.6.24-rc8
--------------------------------------------------------------------
 latency: 36 us, #45/45, CPU#0 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2)
    -----------------
    | task: migration/1-5 (uid:0 nice:-5 policy:1 rt_prio:99)
    -----------------

                 _------=> CPU#
                / _-----=> irqs-off
               | / _----=> need-resched
               || / _---=> hardirq/softirq
               ||| / _--=> preempt-depth
               |||| /
               |||||     delay
   cmd     pid ||||| time  |   caller
      \   /    |||||   \   |   /
    bash-10653 1d..3    0us : wake_up_process+0x15/0x17 <ffffffff80233e80> (sched_exec+0xc9/0x100 <ffffffff80235343>)
    bash-10653 1d..3    1us : try_to_wake_up+0x271/0x2e7 <ffffffff80233dcf> (sub_preempt_count+0xc/0x7a <ffffffff8023309e>)
    bash-10653 1d..2    2us : try_to_wake_up+0x296/0x2e7 <ffffffff80233df4> (update_rq_clock+0x9/0x20 <ffffffff802303f3>)
    bash-10653 1d..2    2us : update_rq_clock+0x1e/0x20 <ffffffff80230408> (__update_rq_clock+0xc/0x90 <ffffffff80230366>)
    bash-10653 1d..2    3us : __update_rq_clock+0x1b/0x90 <ffffffff80230375> (sched_clock+0x9/0x29 <ffffffff80214529>)
    bash-10653 1d..2    4us : try_to_wake_up+0x2a6/0x2e7 <ffffffff80233e04> (activate_task+0xc/0x3f <ffffffff8022ffca>)
    bash-10653 1d..2    4us : activate_task+0x2d/0x3f <ffffffff8022ffeb> (enqueue_task+0xe/0x66 <ffffffff8022ff66>)
    bash-10653 1d..2    5us : enqueue_task+0x5b/0x66 <ffffffff8022ffb3> (enqueue_task_rt+0x9/0x3c <ffffffff80233351>)
    bash-10653 1d..2    6us : try_to_wake_up+0x2ba/0x2e7 <ffffffff80233e18> (check_preempt_wakeup+0x12/0x99 <ffffffff80234f84>)
[...]
    bash-10653 1d..5   33us : tracing_record_cmdline+0xcf/0xd4 <ffffffff80338aad> (_spin_unlock+0x9/0x33 <ffffffff8048d3ec>)
    bash-10653 1d..5   34us : _spin_unlock+0x19/0x33 <ffffffff8048d3fc> (sub_preempt_count+0xc/0x7a <ffffffff8023309e>)
    bash-10653 1d..4   35us : wakeup_sched_switch+0x65/0x2ff <ffffffff80339f66> (_spin_lock_irqsave+0xc/0xa9 <ffffffff8048d08b>)
    bash-10653 1d..4   35us : _spin_lock_irqsave+0x19/0xa9 <ffffffff8048d098> (add_preempt_count+0xe/0x77 <ffffffff8023311a>)
    bash-10653 1d..4   36us : sched_switch_callback+0x73/0x81 <ffffffff80338d2f> (schedule+0x483/0x6d5 <ffffffff8048b3ee>)

vim:ft=help
============

The [...] was added here to not waste your email box space.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch adds context switch tracing, of the format of:

                  _------=> CPU#
                 / _-----=> irqs-off
                | / _----=> need-resched
                || / _---=> hardirq/softirq
                ||| / _--=> preempt-depth
                |||| /
                |||||     delay
    cmd     pid ||||| time  |      pid:prio:state
       \   /    |||||   \   |      /
  swapper-0     1d..3    137us+:  0:140:R --> 2912:120
     sshd-2912  1d..3    216us+:  2912:120:S --> 0:140
  swapper-0     1d..3    261us+:  0:140:R --> 2912:120
     bash-2920  0d..3    267us+:  2920:120:S --> 0:140
     sshd-2912  1d..3    330us!:  2912:120:S --> 0:140
  swapper-0     1d..3   2389us+:  0:140:R --> 2847:120
 yum-upda-2847  1d..3   2411us!:  2847:120:S --> 0:140
  swapper-0     0d..3  11089us+:  0:140:R --> 3139:120
 gdm-bina-3139  0d..3  11113us!:  3139:120:S --> 0:140
  swapper-0     1d..3 102328us+:  0:140:R --> 2847:120
 yum-upda-2847  1d..3 102348us!:  2847:120:S --> 0:140

 "sched_switch" is added to /debugfs/tracing/available_tracers

[ Eugene Teo <eugeneteo@kernel.sg: remove unused tracing_sched_switch_enabled ]
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This is a simple trace that uses the ftrace infrastructure. It is
designed to be fast and small, and easy to use. It is useful to
record things that happen over a very short period of time, and
not to analyze the system in general.

 Updates:

  available_tracers
     "function" is added to this file.

  current_tracer
    To enable the function tracer:

      echo function > /debugfs/tracing/current_tracer

     To disable the tracer:

       echo disable > /debugfs/tracing/current_tracer

The output of the function_trace file is as follows

  "echo noverbose > /debugfs/tracing/iter_ctrl"

preemption latency trace v1.1.5 on 2.6.24-rc7-tst
Signed-off-by: NIngo Molnar <mingo@elte.hu>
--------------------------------------------------------------------
 latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
    -----------------
    | task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
    -----------------

                 _------=> CPU#
                / _-----=> irqs-off
               | / _----=> need-resched
               || / _---=> hardirq/softirq
               ||| / _--=> preempt-depth
               |||| /
               |||||     delay
   cmd     pid ||||| time  |   caller
      \   /    |||||   \   |   /
 swapper-0     0d.h. 1595128us+: set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
 swapper-0     0d.h. 1595131us+: _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)

Or with verbose turned on:

  "echo verbose > /debugfs/tracing/iter_ctrl"

preemption latency trace v1.1.5 on 2.6.24-rc7-tst
--------------------------------------------------------------------
 latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4)
    -----------------
    | task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
    -----------------

         swapper     0 0 9 00000000 00000000 [f3675f41] 1595.128ms (+0.003ms): set_normalized_timespec+0x8/0x2d <c043841d> (ktime_get_ts+0x4a/0x4e <c04499d4>)
         swapper     0 0 9 00000000 00000001 [f3675f45] 1595.131ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)
         swapper     0 0 9 00000000 00000002 [f3675f48] 1595.135ms (+0.003ms): _spin_lock+0x8/0x18 <c0630690> (hrtimer_interrupt+0x6e/0x1b0 <c0449c56>)

The "trace" file is not affected by the verbose mode, but is by the symonly.

 echo "nosymonly" > /debugfs/tracing/iter_ctrl

tracer:
[   81.479967] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <ffffffff80337a4d> <-- _spin_unlock_irqrestore+0xe/0x5a <ffffffff8048cc8f>
[   81.479967] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <ffffffff8048ccbf> <-- sub_preempt_count+0xc/0x7a <ffffffff80233d7b>
[   81.479968] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <ffffffff80233d9f> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>
[   81.479968] CPU 0: bash:3154 vfs_write+0x11d/0x155 <ffffffff8029a043> <-- dnotify_parent+0x12/0x78 <ffffffff802d54fb>
[   81.479968] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <ffffffff802d5516> <-- _spin_lock+0xe/0x70 <ffffffff8048c910>
[   81.479969] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <ffffffff8048c91d> <-- add_preempt_count+0xe/0x77 <ffffffff80233df7>
[   81.479969] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <ffffffff80233e27> <-- in_lock_functions+0x9/0x24 <ffffffff8025a75d>

 echo "symonly" > /debugfs/tracing/iter_ctrl

tracer:
[   81.479913] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <-- _spin_unlock_irqrestore+0xe/0x5a
[   81.479913] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <-- sub_preempt_count+0xc/0x7a
[   81.479913] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <-- in_lock_functions+0x9/0x24
[   81.479914] CPU 0: bash:3154 vfs_write+0x11d/0x155 <-- dnotify_parent+0x12/0x78
[   81.479914] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <-- _spin_lock+0xe/0x70
[   81.479914] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <-- add_preempt_count+0xe/0x77
[   81.479914] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <-- in_lock_functions+0x9/0x24
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch adds the latency tracer infrastructure. This patch
does not add anything that will select and turn it on, but will
be used by later patches.

If it were to be compiled, it would add the following files
to the debugfs:

 The root tracing directory:

  /debugfs/tracing/

This patch also adds the following files:

  available_tracers
     list of available tracers. Currently no tracers are
     available. Looking into this file only shows
     "none" which is used to unregister all tracers.

  current_tracer
     The trace that is currently active. Empty on start up.
     To switch to a tracer simply echo one of the tracers that
     are listed in available_tracers:

   example: (used with later patches)

      echo function > /debugfs/tracing/current_tracer

     To disable the tracer:

       echo disable > /debugfs/tracing/current_tracer

  tracing_enabled
     echoing "1" into this file starts the ftrace function tracing
      (if sysctl kernel.ftrace_enabled=1)
     echoing "0" turns it off.

  latency_trace
      This file is readonly and holds the result of the trace.

  trace
      This file outputs a easier to read version of the trace.

  iter_ctrl
      Controls the way the output of traces look.
      So far there's two controls:
        echoing in "symonly" will only show the kallsyms variables
            without the addresses (if kallsyms was configured)
        echoing in "verbose" will change the output to show
            a lot more data, but not very easy to understand by
            humans.
        echoing in "nosymonly" turns off symonly.
        echoing in "noverbose" turns off verbose.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is
set to a non-zero value the ftrace routine will be called everytime
we enter a kernel function that is not marked with the "notrace"
attribute.

The ftrace routine will then call a registered function if a function
happens to be registered.

[ This code has been highly hacked by Steven Rostedt and Ingo Molnar,
  so don't blame Arnaldo for all of this ;-) ]

Update:
  It is now possible to register more than one ftrace function.
  If only one ftrace function is registered, that will be the
  function that ftrace calls directly. If more than one function
  is registered, then ftrace will call a function that will loop
  through the functions to call.
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Mark with "notrace" functions in core code that should not be
traced.  The "notrace" attribute will prevent gcc from adding
a call to ftrace on the annotated funtions.
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Add the notrace annotations to the vsyscall functions - there we are
not in kernel context yet, so the tracer function cannot (and must not)
be called.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

notrace signals that a function should not be traced. Most of the
time this is used by tracers to annotate code that cannot be
traced - it's in a volatile state (such as in user vdso context
or NMI context) or it's in the tracer internals.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The tracer may need to call preempt_enable and disable functions
for time keeping and such. The trace gets ugly when we see these
functions show up for all traces. To make the output cleaner
this patch adds preempt_enable_notrace and preempt_disable_notrace
to be used by tracer (and debugging) functions.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The tracer wants to be able to convert the state number
into a user visible character. This patch pulls that conversion
string out the scheduler into the header. This way if it were to
ever change, other parts of the kernel will know.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

add 3 lightweight callbacks to the tracer backend.

zero impact if tracing is turned off.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Fix reversed memset arguments
  Adds username in the upcall key for unattended mounts with keytab
  [CIFS] Remove redundant NULL check

Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

Signed-off-by: NIgor Mammedov <niallain@gmail.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  net: The world is not perfect patch.
  tcp: Make prior_ssthresh a u32
  xfrm_user: Remove zero length key checks.
  net/ipv4/arp.c: Use common hex_asc helpers
  cassini: Only use chip checksum for ipv4 packets.
  tcp: TCP connection times out if ICMP frag needed is delayed
  netfilter: Move linux/types.h inclusions outside of #ifdef __KERNEL__
  af_key: Fix selector family initialization.
  libertas: Fix ethtool statistics
  mac80211: fix NULL pointer dereference in ieee80211_compatible_rates
  mac80211: don't claim iwspy support
  orinoco_cs: add ID for SpeedStream wireless adapters
  hostap_cs: add ID for Conceptronic CON11CPro
  rtl8187: resource leak in error case
  ath5k: Fix loop variable initializations

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Prevent stack backtrace false positives on trap frames.
  sparc64: Fix stack tracing through trap frames.
  sparc64: Fix kernel thread stack termination.
  sunhv: Fix locking in non-paged I/O case.

When we fully commit to returning back to kernel mode from
a trap, zero out the regs->magic value to prevent false
positives during stack backtraces.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Noticed by Coverity checker.
Signed-off-by: NSteve French <sfrench@us.ibm.com>

The offset to the pt_regs area was wrong, so we weren't
looking at the right location for the magic cookie.

A trap frame is composed of a "struct sparc_stackf" then
a "struct pt_regs", the code was using "struct reg_window"
instead of "struct sparc_stackf".
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Because of the silly way I set up the initial stack for
new kernel threads, there is a loop at the top of the
stack.

To fix this, properly add another stack frame that is copied
from the parent and terminate it in the child by setting
the frame pointer in that frame to zero.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

  Unless there will be any objection here, I suggest consider the
following patch which simply removes the code for the
-DI_WISH_WORLD_WERE_PERFECT in the three methods which use it.

The compilation errors we get when using -DI_WISH_WORLD_WERE_PERFECT
show that this code was not built and not used for really a long time.
Signed-off-by: NRami Rosen <ramirose@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If previous window was above representable values of u16,
strange things will happen if undo with the truncated value
is called for. Alternatively, this could be fixed by some
max trickery but that would limit undoing high-speed undos.

Adds 16-bit hole but there isn't anything to fill it with.
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The crypto layer will determine whether that is valid
or not.

Suggested by Herbert Xu, based upon a report and patch
by Martin Willi.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>

Here the local hexbuf is a duplicate of global const char hex_asc from
lib/hexdump.c, except the hex letters' cases:

	const char hexbuf[] = "0123456789ABCDEF";

	const char hex_asc[] = "0123456789abcdef";

and here to print HW addresses, the hex cases are not significant.

Thanks to Harvey Harrison to introduce the hex_asc_hi/hex_asc_lo helpers.
Signed-off-by: NDenis Cheng <crquan@gmail.com>
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

According to David Monro, at least with Natsemi Saturn chips the
cassini driver has some trouble with ipv6 checksums.

Until we have more information about what's going on here, only
use the chip checksums for ipv4.

This workaround was suggested and tested by David.

Update version and release date.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

driver uses symbols defined only on ARM
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>