When dumping the VMA, include the parameters of the different GGTT views
so that we can distinguish them.

v2: Contract output and add MISSING_CASE for any unknown types.
v3: Show both stride and offset for rotated planes.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112112108.31632-1-chris@chris-wilson.co.uk

Struct intel_shared_dpll_config is used to hold the state of the DPLL in
the "atomic" sense, so call it state like everything else atomic.

v2: Rebase
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1)
Link: http://patchwork.freedesktop.org/patch/msgid/1483024933-3726-4-git-send-email-ander.conselvan.de.oliveira@intel.com

The idle work handler is self-arming - if it detects that it needs to
run again it will queue itself from its work handler. Take greater care
when trying to drain the idle work, and double check that it is flushed.

The free worker has a similar issue where it is armed by an RCU task
which may be running concurrently with us.

This should hopefully help with the sporadic WARN_ON(dev_priv->gt.awake)
from i915_gem_suspend.

v2: Reuse drain_freed_objects.
v3: Don't try to flush the freed objects from the shrinker, as it may be
underneath the struct_mutex already.
v4: do while and comment upon the excess rcu_barrier in drain_freed_objects
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161223145804.6605-2-chris@chris-wilson.co.uk

To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/62ce937ae9a341421942b4418515610d055fa653.1482158544.git.geliangtang@gmail.com

Replace uses of fb->pixel_format with fb->format->format.
Less duplicated information is a good thing.

Note that coccinelle failed to eliminate the
"/* fourcc format */" comment from drm_framebuffer.h, so I had
to do that part manually.

@@
struct drm_framebuffer *FB;
expression E;
@@
 drm_helper_mode_fill_fb_struct(...) {
	...
-	FB->pixel_format = E;
	...
 }

@@
struct drm_framebuffer *FB;
expression E;
@@
 i9xx_get_initial_plane_config(...) {
	...
-	FB->pixel_format = E;
	...
 }

@@
struct drm_framebuffer *FB;
expression E;
@@
 ironlake_get_initial_plane_config(...) {
	...
-	FB->pixel_format = E;
	...
 }

@@
struct drm_framebuffer *FB;
expression E;
@@
 skylake_get_initial_plane_config(...) {
	...
-	FB->pixel_format = E;
	...
 }

@@
struct drm_framebuffer *a;
struct drm_framebuffer b;
@@
(
- a->pixel_format
+ a->format->format
|
- b.pixel_format
+ b.format->format
)

@@
struct drm_plane_state *a;
struct drm_plane_state b;
@@
(
- a->fb->pixel_format
+ a->fb->format->format
|
- b.fb->pixel_format
+ b.fb->format->format
)

@@
struct drm_crtc *CRTC;
@@
(
- CRTC->primary->fb->pixel_format
+ CRTC->primary->fb->format->format
|
- CRTC->primary->state->fb->pixel_format
+ CRTC->primary->state->fb->format->format
)

@@
struct drm_mode_set *set;
@@
(
- set->fb->pixel_format
+ set->fb->format->format
|
- set->crtc->primary->fb->pixel_format
+ set->crtc->primary->fb->format->format
)

@@
@@
 struct drm_framebuffer {
	 ...
-	 uint32_t pixel_format;
	 ...
 };

v2: Fix commit message (Laurent)
    Rebase due to earlier removal of many fb->pixel_format uses,
    including the 'fb->format = drm_format_info(fb->format->format);'
    snafu
v3: Adjusted the semantic patch a bit and regenerated due to code
    changes

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481751175-18463-1-git-send-email-ville.syrjala@linux.intel.com

Replace uses of fb->bits_per_pixel with fb->format->cpp[0]*8.
Less duplicated information is a good thing.

Note that I didn't put parens around the cpp*8 in the below cocci script,
on account of not wanting spurious parens all over the place. Instead I
did the unsafe way, and tried to look over the entire diff to spot if
any dangerous expressions were produced. I didn't see any.

There are some cases where previously the code did X*bpp/8, so the
division happened after the multiplication. Those are now just X*cpp
so the division effectively happens before the multiplication,
but that is perfectly fine since bpp is always a multiple of 8.

@@
struct drm_framebuffer *FB;
expression E;
@@
 drm_helper_mode_fill_fb_struct(...) {
	...
-	FB->bits_per_pixel = E;
	...
 }

@@
struct drm_framebuffer *FB;
expression E;
@@
 i9xx_get_initial_plane_config(...) {
	...
-	FB->bits_per_pixel = E;
	...
 }

@@
struct drm_framebuffer *FB;
expression E;
@@
 ironlake_get_initial_plane_config(...) {
	...
-	FB->bits_per_pixel = E;
	...
 }

@@
struct drm_framebuffer *FB;
expression E;
@@
 skylake_get_initial_plane_config(...) {
	...
-	FB->bits_per_pixel = E;
	...
 }

@@
struct drm_framebuffer FB;
expression E;
@@
(
- E * FB.bits_per_pixel / 8
+ E * FB.format->cpp[0]
|
- FB.bits_per_pixel / 8
+ FB.format->cpp[0]
|
- E * FB.bits_per_pixel >> 3
+ E * FB.format->cpp[0]
|
- FB.bits_per_pixel >> 3
+ FB.format->cpp[0]
|
- (FB.bits_per_pixel + 7) / 8
+ FB.format->cpp[0]
|
- FB.bits_per_pixel
+ FB.format->cpp[0] * 8
|
- FB.format->cpp[0] * 8 != 8
+ FB.format->cpp[0] != 1
)

@@
struct drm_framebuffer *FB;
expression E;
@@
(
- E * FB->bits_per_pixel / 8
+ E * FB->format->cpp[0]
|
- FB->bits_per_pixel / 8
+ FB->format->cpp[0]
|
- E * FB->bits_per_pixel >> 3
+ E * FB->format->cpp[0]
|
- FB->bits_per_pixel >> 3
+ FB->format->cpp[0]
|
- (FB->bits_per_pixel + 7) / 8
+ FB->format->cpp[0]
|
- FB->bits_per_pixel
+ FB->format->cpp[0] * 8
|
- FB->format->cpp[0] * 8 != 8
+ FB->format->cpp[0] != 1
)

@@
struct drm_plane_state *state;
expression E;
@@
(
- E * state->fb->bits_per_pixel / 8
+ E * state->fb->format->cpp[0]
|
- state->fb->bits_per_pixel / 8
+ state->fb->format->cpp[0]
|
- E * state->fb->bits_per_pixel >> 3
+ E * state->fb->format->cpp[0]
|
- state->fb->bits_per_pixel >> 3
+ state->fb->format->cpp[0]
|
- (state->fb->bits_per_pixel + 7) / 8
+ state->fb->format->cpp[0]
|
- state->fb->bits_per_pixel
+ state->fb->format->cpp[0] * 8
|
- state->fb->format->cpp[0] * 8 != 8
+ state->fb->format->cpp[0] != 1
)

@@
@@
- (8 * 8)
+ 8 * 8

@@
struct drm_framebuffer FB;
@@
- (FB.format->cpp[0])
+ FB.format->cpp[0]

@@
struct drm_framebuffer *FB;
@@
- (FB->format->cpp[0])
+ FB->format->cpp[0]

@@
@@
 struct drm_framebuffer {
	 ...
-	 int bits_per_pixel;
	 ...
 };

v2: Clean up the 'cpp*8 != 8' and '(8 * 8)' cases (Laurent)
v3: Adjusted the semantic patch a bit and regenerated due to code
    changes
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Link: http://patchwork.freedesktop.org/patch/msgid/1481751140-18352-1-git-send-email-ville.syrjala@linux.intel.com

Replace uses of fb->depth with fb->format->depth. Less duplicate
information is a good thing.

@@
struct drm_framebuffer *fb;
expression E;
@@
 drm_helper_mode_fill_fb_struct(...) {
	...
-	fb->depth = E;
	...
 }

@@
struct nouveau_framebuffer *fb;
@@
- fb->base.depth
+ fb->base.format->depth

@@
struct drm_framebuffer fb;
@@
- fb.depth
+ fb.format->depth

@@
struct drm_framebuffer *fb;
@@
- fb->depth
+ fb->format->depth

@@
struct drm_framebuffer fb;
@@
- (fb.format->depth)
+ fb.format->depth

@@
struct drm_framebuffer *fb;
@@
- (fb->format->depth)
+ fb->format->depth

@@
@@
 struct drm_framebuffer {
	 ...
-	 unsigned int depth;
	 ...
 };

v2: Drop the vmw stuff (Daniel)
    Rerun spatch due to code changes
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1481751095-18249-1-git-send-email-ville.syrjala@linux.intel.com

This patch does not change anything functionally, just cleans up
the DP compliance related variables and stores them all together
in a separate struct intel_dp_compliance. There is another struct
intel_dp_compliance_data to store all the test data. This makes it easy to
reset the compliance variables through a memset instead of
individual resetting.

v2:
* Removed functional changes for EDID (Jani Nikula)
Reviewed-by: NJani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwl.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481329371-16306-1-git-send-email-manasi.d.navare@intel.com

In preparation to using a generic API in the DRM core for continuous CRC
generation, move the related code out of i915_debugfs.c into a new file.

Eventually, only the Intel-specific code will remain in this new file.

v2: Rebased.

v6: Rebased.

v7: Fix whitespace issue.

v9: Have intel_display_crc_init accept a drm_i915_private instead.

v12: Rebased.
Signed-off-by: NTomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: NEmil Velikov <emil.velikov@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1481545788-18194-1-git-send-email-tomeu.vizoso@collabora.com

For PSR2 , as per spec, PSR2_CTL bit 31 to be set.
for psr1, bit 31 in SRD_CTL to be set. Reporting
"HW Enabled & Active bit" status for psr2 from SRD_CTL
gives  wrong status.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Nvathsala nagaraju <vathsala.nagaraju@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481307129-29354-1-git-send-email-vathsala.nagaraju@intel.com

Consistency FTW.
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/9ab811dc06570bd3fc05a917ade1bdc9bb805a75.1480520526.git.jani.nikula@intel.com

Add more consistency to our naming. Pineview remains the outlier. Keep
using code names for gen5+.

v2: rebased
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481105584-23033-1-git-send-email-jani.nikula@intel.com

The platform flags in device info are (mostly) mutually
exclusive. Replace the flags with an enum. Add the platform enum also
for platforms that previously didn't have a flag, and give them codename
logging in dmesg.

Pineview remains an exception, the platform being G33 for that.

v2: Sort enum by gen and date

v3: rebase on geminilake enabling
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480596595-3278-1-git-send-email-jani.nikula@intel.com

The i915_next_seqno read value is to be the next seqno used by the
kernel. However, in the conversion to atomics ops for gt.next_seqno, in
commit 28176ef4 ("drm/i915: Reserve space in the global seqno during
request allocation"), this was changed from a post-increment to a
pre-increment. This increment was missed from the value reported by
debugfs, so in effect it was reporting the current seqno (last
assigned), not the next seqno.

Fixes: 28176ef4 ("drm/i915: Reserve space in the global seqno during request allocation")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81209Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161124094752.19129-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 9607ae79)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

i915_hws_info() has not been kept upto date (missing new engines) and so
I consider it to be unused. HWS is included in the error state, which
would be an avenue to retrieving it if required in future (possibly via
i915_engine_info). As it is currently oopsing with an rpm testcase, just
remove it.

Fixes: 3b3f1650 ("drm/i915: Allocate intel_engine_cs structure only for the enabled engines")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98838Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161124093401.18852-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit 30576a2c)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Geminilake is mostly backwards compatible with broxton, so change most
of the IS_BROXTON() checks to IS_GEN9_LP(). Differences between the
platforms will be implemented in follow-up patches.

v2: Don't reuse broxton's path in intel_update_max_cdclk().
    Don't set plane count as in broxton.

v3: Rebase

v4: Include the check intel_bios_is_port_hpd_inverted().
    Commit message.

v5: Leave i915_dmc_info() out; glk's csr version != bxt's. (Rodrigo)

v6: Rebase.

v7: Convert a few mode IS_BROXTON() occurances in pps, ddi, dsi and pll
    code. (Rodrigo)

v8: Squash a couple of DDI patches with more conversions. (Rodrigo)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480667037-11215-2-git-send-email-ander.conselvan.de.oliveira@intel.com

Since it does not need dev at all.

Also change the stored pointer in struct i915_error_state_file_priv
to i915.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

The client->cookie is a shadow of the doorbell->cookie value, so rename
it to indicate its association with the doorbell, like the doorbell id
and offset.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161129121024.22650-3-chris@chris-wilson.co.uk

i915_guc_info() (part of debugfs output) tries to avoid holding
struct_mutex for a long period by copying onto the stack. This causes a
warning that the stack frame is massive, so stop doing that. We can even
forgo holding the struct_mutex here as that doesn't serialise the values
being read (and the lists used exist for the device lifetime).

v2: Skip printing anything if guc->execbuf_client is disabled (avoids
potential NULL dereference).
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161129121024.22650-2-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

Add the DP MST info dump in debugfs.
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NLibin Yang <libin.yang@intel.com>
Reviewed-by: NLyude <cpaul@redhat.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480334827-112273-1-git-send-email-libin.yang@intel.com

Show the last submitted seqno to the engine, not the overall next seqno,
as this is more pertinent information when inspecting the pageflip and
whether the CS or display engine stalled.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161124144750.2610-2-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Rename i915_gem_timeline member 'next_seqno' into 'seqno' as
the variable is pre-increment. We've already had two bugs due
to the confusing name, second is fixed as follow-up patch.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161124144750.2610-1-chris@chris-wilson.co.uk

The i915_next_seqno read value is to be the next seqno used by the
kernel. However, in the conversion to atomics ops for gt.next_seqno, in
commit 28176ef4 ("drm/i915: Reserve space in the global seqno during
request allocation"), this was changed from a post-increment to a
pre-increment. This increment was missed from the value reported by
debugfs, so in effect it was reporting the current seqno (last
assigned), not the next seqno.

Fixes: 28176ef4 ("drm/i915: Reserve space in the global seqno during request allocation")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81209Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161124094752.19129-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

i915_hws_info() has not been kept upto date (missing new engines) and so
I consider it to be unused. HWS is included in the error state, which
would be an avenue to retrieving it if required in future (possibly via
i915_engine_info). As it is currently oopsing with an rpm testcase, just
remove it.

Fixes: 3b3f1650 ("drm/i915: Allocate intel_engine_cs structure only for the enabled engines")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98838Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161124093401.18852-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

Hangcheck state accumulation has gained more steps
along the years, like head movement and more recently the
subunit inactivity check. As the subunit sampling is only
done if the previous state check showed inactivity, we
have added more stages (and time) to reach a hang verdict.

Asymmetric engine states led to different actual weight of
'one hangcheck unit' and it was demonstrated in some
hangs that due to difference in stages, simpler engines
were accused falsely of a hang as their scoring was much
more quicker to accumulate above the hang treshold.

To completely decouple the hangcheck guilty score
from the hangcheck period, convert hangcheck score to a
rough period of inactivity measurement. As these are
tracked as jiffies, they are meaningful also across
reset boundaries. This makes finding a guilty engine
more accurate across multi engine activity scenarios,
especially across asymmetric engines.

We lose the ability to detect cross batch malicious attempts
to hinder the progress. Plan is to move this functionality
to be part of context banning which is more natural fit,
later in the series.

v2: use time_before macros (Chris)
    reinstate the pardoning of moving engine after hc (Chris)
v3: avoid global state for per engine stall detection (Chris)
v4: take timeline last retirement into account (Chris)
v5: do debug print on pardoning, split out retirement timestamp (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>

Better to use num_scaler itself while printing scaler_info.
This fixes a bug of printing information for the missing
second scaler on pipe C for SKL platform.
Signed-off-by: NA.Sunil Kamath <sunil.kamath@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479664226-22307-1-git-send-email-sunil.kamath@intel.com

Similar to existing yesno and onoff and use it throughout the code.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479385814-2358-2-git-send-email-tvrtko.ursulin@linux.intel.com

It has been suggested that having per-plane modifiers is making life
more difficult for userspace, so let's just retire modifier[1-3] and
use modifier[0] to apply to the entire framebuffer.

Obviosuly this means that if individual planes need different tiling
layouts and whatnot we will need a new modifier for each combination
of planes with different tiling layouts.

For a bit of extra backwards compatilbilty the kernel will allow
non-zero modifier[1+] but it require that they will match modifier[0].
This in case there's existing userspace out there that sets
modifier[1+] to something non-zero with planar formats.

Mostly a cocci job, with a bit of manual stuff mixed in.

@@
struct drm_framebuffer *fb;
expression E;
@@
- fb->modifier[E]
+ fb->modifier

@@
struct drm_framebuffer fb;
expression E;
@@
- fb.modifier[E]
+ fb.modifier

Cc: Kristian Høgsberg <hoegsberg@gmail.com>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Cc: dczaplejewicz@collabora.co.uk
Suggested-by: NKristian Høgsberg <hoegsberg@gmail.com>
Acked-by: NBen Widawsky <ben@bwidawsk.net>
Acked-by: NDaniel Stone <daniels@collabora.com>
Acked-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479295996-26246-1-git-send-email-ville.syrjala@linux.intel.com

Track the priority of each request and use it to determine the order in
which we submit requests to the hardware via execlists.

The priority of the request is determined by the user (eventually via
the context) but may be overridden at any time by the driver. When we set
the priority of the request, we bump the priority of all of its
dependencies to match - so that a high priority drawing operation is not
stuck behind a background task.

When the request is ready to execute (i.e. we have signaled the submit
fence following completion of all its dependencies, including third
party fences), we put the request into a priority sorted rbtree to be
submitted to the hardware. If the request is higher priority than all
pending requests, it will be submitted on the next context-switch
interrupt as soon as the hardware has completed the current request. We
do not currently preempt any current execution to immediately run a very
high priority request, at least not yet.

One more limitation, is that this is first implementation is for
execlists only so currently limited to gen8/gen9.

v2: Replace recursive priority inheritance bumping with an iterative
depth-first search list.
v3: list_next_entry() for walking lists
v4: Explain how the dfs solves the recursion problem with PI.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-8-chris@chris-wilson.co.uk

The execlist_lock is now completely subsumed by the engine->timeline->lock,
and so we can remove the redundant layer of locking.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-5-chris@chris-wilson.co.uk

The function's behaviour was changed in 90844f00, without changing
its signature, causing people to keep using it the old way without
realising they were now leaking memory.
Rob Clark also noticed it was also allocating GFP_KERNEL memory in
atomic contexts, breaking them.

Instead of having to allocate GFP_ATOMIC memory and fixing the callers
to make them cleanup the memory afterwards, let's change the function's
signature by having the caller take care of the memory and passing it to
the function.
The new parameter is a single-field struct in order to enforce the size
of its buffer and help callers to correctly manage their memory.

Fixes: 90844f00 ("drm: make drm_get_format_name thread-safe")
Cc: Rob Clark <robdclark@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Acked-by: NRob Clark <robdclark@gmail.com>
Acked-by: Sinclair Yeh <syeh@vmware.com> (vmwgfx)
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NEric Engestrom <eric@engestrom.ch>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161112011309.9799-1-eric@engestrom.ch

Get rid of sloppy inline functions now that we don't have more users:

i915_gem_request_get_seqno
i915_gem_request_get_engine

v2:
- request->engine is always non-NULL (Chris)
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478589108-3702-1-git-send-email-joonas.lahtinen@linux.intel.com

When looking at freezes whilst working on execlists, knowing the order
of the pending requests in the driver is useful.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161027000348.4641-2-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

$ sed -i -r 's/\bglobal_list\b/global_link/g' *.c *.h

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478081764-8058-1-git-send-email-joonas.lahtinen@linux.intel.com

Replace the open coded dev_priv->pipe_to_crtc_mapping[] usage with
intel_get_crtc_for_pipe().

Mostly done with coccinelle, with a few manual tweaks

@@
expression E1, E2;
@@
(
- E1->pipe_to_crtc_mapping[E2]
+ intel_get_crtc_for_pipe(E1, E2)
|
- E1->plane_to_crtc_mapping[E2]
+ intel_get_crtc_for_plane(E1, E2)
)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-12-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-11-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Unify our approach to things by passing around dev_priv instead of dev.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-8-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

A lot of users of the {pipe,plane}_to_crtc_mapping[] will end up
casting the result to intel_crtc, so let's just store the intel_crtc
pointer in the first place.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-7-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Whilst waiting on a request, we may do so without holding any locks or
any guards beyond a reference to the request. In order to avoid taking
locks within request deallocation, we drop references to its timeline
(via the context and ppgtt) upon retirement. We should avoid chasing
such pointers outside of their control, in particular we inspect the
request->timeline to see if we may restore the RPS waitboost for a
client. If we instead look at the engine->timeline, we will have similar
behaviour on both full-ppgtt and !full-ppgtt systems and reduce the
amount of reward we give towards stalling clients (i.e. only if the
client stalls and the GPU is uncontended does it reclaim its boost).
This restores behaviour back to pre-timelines, whilst fixing:

[  645.078485] BUG: KASAN: use-after-free in i915_gem_object_wait_fence+0x1ee/0x2e0 at addr ffff8802335643a0
[  645.078577] Read of size 4 by task gem_exec_schedu/28408
[  645.078638] CPU: 1 PID: 28408 Comm: gem_exec_schedu Not tainted 4.9.0-rc2+ #64
[  645.078724] Hardware name:                  /        , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015
[  645.078816]  ffff88022daef9a0 ffffffff8143d059 ffff880235402a80 ffff880233564200
[  645.078998]  ffff88022daef9c8 ffffffff81229c5c ffff88022daefa48 ffff880233564200
[  645.079172]  ffff880235402a80 ffff88022daefa38 ffffffff81229ef0 000000008110a796
[  645.079345] Call Trace:
[  645.079404]  [<ffffffff8143d059>] dump_stack+0x68/0x9f
[  645.079467]  [<ffffffff81229c5c>] kasan_object_err+0x1c/0x70
[  645.079534]  [<ffffffff81229ef0>] kasan_report_error+0x1f0/0x4b0
[  645.079601]  [<ffffffff8122a244>] kasan_report+0x34/0x40
[  645.079676]  [<ffffffff81634f5e>] ? i915_gem_object_wait_fence+0x1ee/0x2e0
[  645.079741]  [<ffffffff81229951>] __asan_load4+0x61/0x80
[  645.079807]  [<ffffffff81634f5e>] i915_gem_object_wait_fence+0x1ee/0x2e0
[  645.079876]  [<ffffffff816364bf>] i915_gem_object_wait+0x19f/0x590
[  645.079944]  [<ffffffff81636320>] ? i915_gem_object_wait_priority+0x500/0x500
[  645.080016]  [<ffffffff8110fb30>] ? debug_show_all_locks+0x1e0/0x1e0
[  645.080084]  [<ffffffff8110abdc>] ? check_chain_key+0x14c/0x210
[  645.080157]  [<ffffffff8110a796>] ? __lock_is_held+0x46/0xc0
[  645.080226]  [<ffffffff8163bc61>] ? i915_gem_set_domain_ioctl+0x141/0x690
[  645.080296]  [<ffffffff8163bcc2>] i915_gem_set_domain_ioctl+0x1a2/0x690
[  645.080366]  [<ffffffff811f8f85>] ? __might_fault+0x75/0xe0
[  645.080433]  [<ffffffff815a55f7>] drm_ioctl+0x327/0x640
[  645.080508]  [<ffffffff8163bb20>] ? i915_gem_obj_prepare_shmem_write+0x3a0/0x3a0
[  645.080603]  [<ffffffff815a52d0>] ? drm_ioctl_permit+0x120/0x120
[  645.080670]  [<ffffffff8110abdc>] ? check_chain_key+0x14c/0x210
[  645.080738]  [<ffffffff81275717>] do_vfs_ioctl+0x127/0xa20
[  645.080804]  [<ffffffff8120268c>] ? do_mmap+0x47c/0x580
[  645.080871]  [<ffffffff811da567>] ? vm_mmap_pgoff+0x117/0x140
[  645.080938]  [<ffffffff812755f0>] ? ioctl_preallocate+0x150/0x150
[  645.081011]  [<ffffffff81108c53>] ? up_write+0x23/0x50
[  645.081078]  [<ffffffff811da567>] ? vm_mmap_pgoff+0x117/0x140
[  645.081145]  [<ffffffff811da450>] ? vma_is_stack_for_current+0x90/0x90
[  645.081214]  [<ffffffff8110d853>] ? mark_held_locks+0x23/0xc0
[  645.082030]  [<ffffffff81288408>] ? __fget+0x168/0x250
[  645.082106]  [<ffffffff819ad517>] ? entry_SYSCALL_64_fastpath+0x5/0xb1
[  645.082176]  [<ffffffff81288592>] ? __fget_light+0xa2/0xc0
[  645.082242]  [<ffffffff8127604c>] SyS_ioctl+0x3c/0x70
[  645.082309]  [<ffffffff819ad52e>] entry_SYSCALL_64_fastpath+0x1c/0xb1
[  645.082374] Object at ffff880233564200, in cache kmalloc-8192 size: 8192
[  645.082431] Allocated:
[  645.082480] PID = 28408
[  645.082535]  [  645.082566] [<ffffffff8103ae66>] save_stack_trace+0x16/0x20
[  645.082623]  [  645.082656] [<ffffffff81228b06>] save_stack+0x46/0xd0
[  645.082716]  [  645.082756] [<ffffffff812292fd>] kasan_kmalloc+0xad/0xe0
[  645.082817]  [  645.082848] [<ffffffff81631752>] i915_ppgtt_create+0x52/0x220
[  645.082908]  [  645.082941] [<ffffffff8161db96>] i915_gem_create_context+0x396/0x560
[  645.083027]  [  645.083059] [<ffffffff8161f857>] i915_gem_context_create_ioctl+0x97/0xf0
[  645.083152]  [  645.083183] [<ffffffff815a55f7>] drm_ioctl+0x327/0x640
[  645.083243]  [  645.083274] [<ffffffff81275717>] do_vfs_ioctl+0x127/0xa20
[  645.083334]  [  645.083372] [<ffffffff8127604c>] SyS_ioctl+0x3c/0x70
[  645.083432]  [  645.083464] [<ffffffff819ad52e>] entry_SYSCALL_64_fastpath+0x1c/0xb1
[  645.083551] Freed:
[  645.083599] PID = 27629
[  645.083648]  [  645.083676] [<ffffffff8103ae66>] save_stack_trace+0x16/0x20
[  645.083738]  [  645.083770] [<ffffffff81228b06>] save_stack+0x46/0xd0
[  645.083830]  [  645.083862] [<ffffffff81229203>] kasan_slab_free+0x73/0xc0
[  645.083922]  [  645.083961] [<ffffffff812279c9>] kfree+0xa9/0x170
[  645.084021]  [  645.084053] [<ffffffff81629f60>] i915_ppgtt_release+0x100/0x180
[  645.084139]  [  645.084171] [<ffffffff8161d414>] i915_gem_context_free+0x1b4/0x230
[  645.084257]  [  645.084288] [<ffffffff816537b2>] intel_lr_context_unpin+0x192/0x230
[  645.084380]  [  645.084413] [<ffffffff81645250>] i915_gem_request_retire+0x620/0x630
[  645.084500]  [  645.085226] [<ffffffff816473d1>] i915_gem_retire_requests+0x181/0x280
[  645.085313]  [  645.085352] [<ffffffff816352ba>] i915_gem_retire_work_handler+0xca/0xe0
[  645.085440]  [  645.085471] [<ffffffff810c725b>] process_one_work+0x4fb/0x920
[  645.085532]  [  645.085562] [<ffffffff810c770d>] worker_thread+0x8d/0x840
[  645.085622]  [  645.085653] [<ffffffff810d21e5>] kthread+0x185/0x1b0
[  645.085718]  [  645.085750] [<ffffffff819ad7a7>] ret_from_fork+0x27/0x40
[  645.085811] Memory state around the buggy address:
[  645.085869]  ffff880233564280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  645.085956]  ffff880233564300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  645.086053] >ffff880233564380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  645.086138]                                ^
[  645.086193]  ffff880233564400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  645.086283]  ffff880233564480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

v2: Add a comment to document the hint like nature of
 intel_engine_last_submit()

Fixes: 73cb9701 ("drm/i915: Combine seqno + tracking into a global timeline struct")
Fixes: 80b204bc ("drm/i915: Enable multiple timelines")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161101100317.11129-1-chris@chris-wilson.co.uk

A restriction on our global seqno is that they cannot wrap, and that we
cannot use the value 0. This allows us to detect when a request has not
yet been submitted, its global seqno is still 0, and ensures that
hardware semaphores are monotonic as required by older hardware. To
meet these restrictions when we defer the assignment of the global
seqno, we must check that we have an available slot in the global seqno
space during request construction. If that test fails, we wait for all
requests to be completed and reset the hardware back to 0.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-33-chris@chris-wilson.co.uk