nfs4_init_session was originally written to be called prior to
nfs4_init_channel_attrs, setting the session target_max response and request
sizes that nfs4_init_channel_attrs would pay attention to.

In the current code flow, nfs4_init_session, just like nfs4_init_ds_session
for the data server case, is called after the session is all negotiated, and
is actually used in a RECLAIM COMPLETE call to the server.

Remove the un-needed fc_target_max response and request fields from
nfs4_session and just set the max_resp_sz and max_rqst_sz in
nfs4_init_channel_attrs.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The current scheme is to try and pick the auth flavor that the server
prefers. In some cases though, we may find that we're not actually
able to use that auth flavor later. For instance, the server may
prefer an AUTH_GSS flavor, but we may not be able to get GSSAPI creds.

The current code just gives up at that point. Change it instead to
try the ->create_server call using each of the different authflavors
in the server's list if one was not specified at mount time. Once
we have a successful ->create_server call, return the result. Only
give up and return error if all attempts fail.

Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Instead of handling this as a special case in the auth-selection code,
we can simply fake up an auth_flavs list when the server doesn't
provide it.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In a later patch we're going to want to cycle over this list and attempt
to call ->create_server for each different flavor until one succeeds.
Move the list allocation to the stack of nfs_try_mount_request() and
pass a pointer to it and its length to nfs_request_mount().

Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This looks like pointless refactoring for now, but we'll flesh out
the need_mount case a little more in a later patch.

Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Not need to create pipes for dying client. So just skip them.

Note: we can safely dereference the client structure, because notification
caller is holding sn->pipefs_sb_lock.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Cc: stable@vger.kernel.org
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This helper moves all "registration" code to the new rpc_client_register()
helper.
This helper will be used later in the series to synchronize against PipeFS
MOUNT/UMOUNT events.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

CPU#0                                   CPU#1
-----------------------------           -----------------------------
rpc_kill_sb
sn->pipefs_sb = NULL                    rpc_release_client
(UMOUNT_EVENT)                          rpc_free_auth
rpc_pipefs_event
rpc_get_client_for_event
!atomic_inc_not_zero(cl_count)
<skip the client>
                                        atomic_inc(cl_count)
                                        rpc_free_client
                                        rpc_clnt_remove_pipedir
                                        <skip client dir removing>

To fix this, this patch does the following:

1) Calls RPC_PIPEFS_UMOUNT notification with sn->pipefs_sb_lock being held.
2) Removes SUNRPC client from the list AFTER pipes destroying.
3) Doesn't hold RPC client on notification: if client in the list, then it
can't be destroyed while sn->pipefs_sb_lock in hold by notification caller.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Cc: stable@vger.kernel.org
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Below are races, when RPC client can be created without PiepFS dentries

CPU#0					CPU#1
-----------------------------		-----------------------------
rpc_new_client				rpc_fill_super
rpc_setup_pipedir
mutex_lock(&sn->pipefs_sb_lock)
rpc_get_sb_net == NULL
(no per-net PipeFS superblock)
					sn->pipefs_sb = sb;
					notifier_call_chain(MOUNT)
					(client is not in the list)
rpc_register_client
(client without pipes dentries)

To fix this patch:
1) makes PipeFS mount notification call with pipefs_sb_lock being held.
2) releases pipefs_sb_lock on new SUNRPC client creation only after
registration.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Cc: stable@vger.kernel.org
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The GETDEVICEINFO gdia_maxcount represents all of the data being returned
within the GETDEVICEINFO4resok structure and includes the XDR overhead.

The CREATE_SESSION ca_maxresponsesize is the maximum reply and includes the RPC
headers (including security flavor credentials and verifiers).

Split out the struct pnfs_device field maxcount which is the gdia_maxcount
from the pglen field which is the reply (the total) buffer length.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Fallback should happen only when the request_key() call fails, because
this indicates that there was a problem running the nfsidmap program.
We shouldn't call the legacy code if the error was elsewhere.
Signed-off-by: NBryan Schumaker <bjschuma@netappp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We need to ensure that we clear NFS4_SLOT_TBL_DRAINING on the back
channel when we're done recovering the session.

Regression introduced by commit 774d5f14 (NFSv4.1 Fix a pNFS session
draining deadlock)
Signed-off-by: NAndy Adamson <andros@netapp.com>
[Trond: Changed order to start back-channel first. Minor code cleanup]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org [>=3.10]

Give them names that are a bit more consistent with the general
pNFS naming scheme.

 - lo_seg_contained -> pnfs_lseg_range_contained
 - lo_seg_intersecting -> pnfs_lseg_range_intersecting
 - cmp_layout -> pnfs_lseg_range_cmp
 - is_matching_lseg -> pnfs_lseg_range_match
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Also strip off the unnecessary 'inline' declarations.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The other protocols don't use it, so make it local to NFSv4, and
remove the EXPORT.
Also ensure that we only compile in cache_lib.o if we're using
the legacy DNS resolver.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Bryan Schumaker <bjschuma@netapp.com>

We had a report of a reproducible WARNING:

[ 1360.039358] ------------[ cut here ]------------
[ 1360.043978] WARNING: at fs/dcache.c:1355 d_set_d_op+0x8d/0xc0()
[ 1360.049880] Hardware name: HP Z200 Workstation
[ 1360.054308] Modules linked in: nfsv4 nfs dns_resolver fscache nfsd
auth_rpcgss nfs_acl lockd sunrpc sg acpi_cpufreq mperf coretemp kvm_intel kvm
snd_hda_codec_realtek snd_hda_intel snd_hda_codec hp_wmi crc32c_intel
snd_hwdep e1000e snd_seq snd_seq_device snd_pcm snd_page_alloc snd_timer snd
sparse_keymap rfkill soundcore serio_raw ptp iTCO_wdt pps_core pcspkr
iTCO_vendor_support mei microcode lpc_ich mfd_core wmi xfs libcrc32c sr_mod
sd_mod cdrom crc_t10dif radeon i2c_algo_bit drm_kms_helper ttm ahci libahci
drm i2c_core libata dm_mirror dm_region_hash dm_log dm_mod [last unloaded:
auth_rpcgss]
[ 1360.107406] Pid: 8814, comm: mount.nfs4 Tainted: G         I --------------   3.9.0-0.55.el7.x86_64 #1
[ 1360.116771] Call Trace:
[ 1360.119219]  [<ffffffff810610c0>] warn_slowpath_common+0x70/0xa0
[ 1360.125208]  [<ffffffff810611aa>] warn_slowpath_null+0x1a/0x20
[ 1360.131025]  [<ffffffff811af46d>] d_set_d_op+0x8d/0xc0
[ 1360.136159]  [<ffffffffa05a7d6f>] __rpc_lookup_create_exclusive+0x4f/0x80 [sunrpc]
[ 1360.143710]  [<ffffffffa05a8cc6>] rpc_mkpipe_dentry+0x86/0x170 [sunrpc]
[ 1360.150311]  [<ffffffffa062a7b6>] nfs_idmap_new+0x96/0x130 [nfsv4]
[ 1360.156475]  [<ffffffffa062e7cd>] nfs4_init_client+0xad/0x2d0 [nfsv4]
[ 1360.162902]  [<ffffffff812f02df>] ? idr_get_empty_slot+0x16f/0x3c0
[ 1360.169062]  [<ffffffff812f0582>] ? idr_mark_full+0x52/0x60
[ 1360.174615]  [<ffffffff812f0699>] ? idr_alloc+0x79/0xe0
[ 1360.179826]  [<ffffffffa0598081>] ? __rpc_init_priority_wait_queue+0x81/0xc0 [sunrpc]
[ 1360.187635]  [<ffffffffa05980f3>] ? rpc_init_wait_queue+0x13/0x20 [sunrpc]
[ 1360.194493]  [<ffffffffa05d05da>] nfs_get_client+0x27a/0x350 [nfs]
[ 1360.200666]  [<ffffffffa062e438>] nfs4_set_client.isra.8+0x78/0x100 [nfsv4]
[ 1360.207624]  [<ffffffffa062f2f3>] nfs4_create_server+0xf3/0x3a0 [nfsv4]
[ 1360.214222]  [<ffffffffa06284be>] nfs4_remote_mount+0x2e/0x60 [nfsv4]
[ 1360.220644]  [<ffffffff8119ea79>] mount_fs+0x39/0x1b0
[ 1360.225691]  [<ffffffff81153880>] ? __alloc_percpu+0x10/0x20
[ 1360.231348]  [<ffffffff811b7ccf>] vfs_kern_mount+0x5f/0xf0
[ 1360.236822]  [<ffffffffa0628396>] nfs_do_root_mount+0x86/0xc0 [nfsv4]
[ 1360.243246]  [<ffffffffa06287b4>] nfs4_try_mount+0x44/0xc0 [nfsv4]
[ 1360.249410]  [<ffffffffa05d1457>] ? get_nfs_version+0x27/0x80 [nfs]
[ 1360.255659]  [<ffffffffa05db985>] nfs_fs_mount+0x5c5/0xd10 [nfs]
[ 1360.261650]  [<ffffffffa05dc550>] ? nfs_clone_super+0x140/0x140 [nfs]
[ 1360.268074]  [<ffffffffa05da8e0>] ? param_set_portnr+0x60/0x60 [nfs]
[ 1360.274406]  [<ffffffff8119ea79>] mount_fs+0x39/0x1b0
[ 1360.279443]  [<ffffffff81153880>] ? __alloc_percpu+0x10/0x20
[ 1360.285088]  [<ffffffff811b7ccf>] vfs_kern_mount+0x5f/0xf0
[ 1360.290556]  [<ffffffff811b9f5d>] do_mount+0x1fd/0xa00
[ 1360.295677]  [<ffffffff81137dee>] ? __get_free_pages+0xe/0x50
[ 1360.301405]  [<ffffffff811b9be6>] ? copy_mount_options+0x36/0x170
[ 1360.307479]  [<ffffffff811ba7e3>] sys_mount+0x83/0xc0
[ 1360.312515]  [<ffffffff8160ad59>] system_call_fastpath+0x16/0x1b
[ 1360.318503] ---[ end trace 8fa1f4cbc36094a7 ]---

The problem is that we're ending up in __rpc_lookup_create_exclusive
with a negative dentry that already has d_op set. A little debugging
has shown that when we hit this, the d_ops are already set to
simple_dentry_operations.

I believe that what's happening is that during a mount, idmapd is racing
in and doing a lookup of /var/lib/nfs/rpc_pipefs/nfs/clnt???/idmap.
Before that dentry reference is released, the kernel races in to create
that file and finds the new negative dentry, which already has the
d_op set.

This patch just avoids setting the d_op if it's already set.
simple_dentry_operations and rpc_dentry_operations are functionally
equivalent so it shouldn't matter which one it's set to.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Make sure that NFSv4 SETCLIENTID does not parse the NETID as a
format string.
Signed-off-by: NDjalal Harouni <tixxdz@opendz.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

State recovery currently relies on being able to find a valid
nfs_open_context in the inode->open_files list.
We therefore need to put the nfs_open_context on the list while
we're still protected by the sp->so_reclaim_seqcount in order
to avoid reboot races.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Instead of having the callers set ctx->state, do it inside
_nfs4_open_and_get_state.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

All the callers have an open_context at this point, and since we always
need one in order to do state recovery, it makes sense to use it as the
basis for the nfs4_do_open() call.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We already check the EXEC access mode in the lower layers.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The RPC_TASK_RUNNING flag will always have been set in rpc_make_runnable()
once we get past the test for out_of_line_wait_on_bit() returning
ERESTARTSYS.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If the rpc_task is asynchronous, it could theoretically finish executing
on the workqueue it was assigned by rpc_make_runnable() before we get
round to testing RPC_IS_ASYNC() in rpc_execute.

In practice, however, all the existing callers hold a reference to the
rpc_task, so this can't happen today...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

ctx->cred == ctx->state->owner->so_cred, so let's just use the former.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Use the EXCHGID4_FLAG_BIND_PRINC_STATEID exchange_id flag to enable
stateid protection. This means that if we create a stateid using a
particular principal, then we must use the same principal if we
want to change that state.
IOW: if we OPEN a file using a particular credential, then we have
to use the same credential in subsequent OPEN_DOWNGRADE, CLOSE,
or DELEGRETURN operations that use that stateid.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This is not strictly needed, since get_deviceinfo is not allowed to
return NFS4ERR_ACCESS or NFS4ERR_WRONG_CRED, but lets do it anyway
for consistency with other pNFS operations.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We want to use the same credential for reclaim_complete as we used
for the exchange_id call.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We need to use the same credential as was used for the layoutget
and/or layoutcommit operations.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Ensure that we use the same credential for layoutget, layoutcommit and
layoutreturn.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Darrick J. Wong <darrick.wong@oracle.com> reports:
> I have a kvm-based testing setup that netboots VMs over NFS, the
> client end of which seems to have broken somehow in 3.10-rc1.  The
> server's exports file looks like this:
>
> /storage/mtr/x64	192.168.122.0/24(ro,sync,no_root_squash,no_subtree_check)
>
> On the client end (inside the VM), the initrd runs the following
> command to try to mount the rootfs over NFS:
>
> # mount -o nolock -o ro -o retrans=10 192.168.122.1:/storage/mtr/x64/ /root
>
> (Note: This is the busybox mount command.)
>
> The mount fails with -EINVAL.

Commit 4580a92d "NFS: Use server-recommended security flavor by
default (NFSv3)" introduced a behavior regression for NFS mounts
done via a legacy binary mount(2) call.

Ensure that a default security flavor is specified for legacy binary
mount requests, since they do not invoke nfs_select_flavor() in the
kernel.

Busybox uses klibc's nfsmount command, which performs NFS mounts
using the legacy binary mount data format.  /sbin/mount.nfs is not
affected by this regression.
Reported-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NDarrick J. Wong <darrick.wong@oracle.com>
Acked-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We need to pass the full open mode flags to nfs_may_open() when doing
a delegated open.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org

Commit 79d852bf "NFS: Retry SETCLIENTID with AUTH_SYS instead of
AUTH_NONE" did not take into account commit 23631227 "NFSv4: Fix the
fallback to AUTH_NULL if krb5i is not available".
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The lockless RPC_IS_QUEUED() test in __rpc_execute means that we need to
be careful about ordering the calls to rpc_test_and_set_running(task) and
rpc_clear_queued(task). If we get the order wrong, then we may end up
testing the RPC_TASK_RUNNING flag after __rpc_execute() has looped
and changed the state of the rpc_task.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org