- 09 1月, 2016 13 次提交
-
-
由 Andrey Smetanin 提交于
Trace the following Hyper SynIC events: * set msr * set sint irq * ack sint * sint irq eoi Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
Consolidate updating the Hyper-V SynIC timers in a single place: on guest entry in processing KVM_REQ_HV_STIMER request. This simplifies the overall logic, and makes sure the most current state of msrs and guest clock is used for arming the timers (to achieve that, KVM_REQ_HV_STIMER has to be processed after KVM_REQ_CLOCK_UPDATE). Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
QEMU zero-inits Hyper-V SynIC vectors. We should allow that, and don't reject zero values if set by the host. Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
Hypervisor Function Specification(HFS) doesn't require to disable SynIC timer at timer config write if timer->count = 0. So drop this check, this allow to load timers MSR's during migration restore, because config are set before count in QEMU side. Also fix condition according to HFS doc(15.3.1): "It is not permitted to set the SINTx field to zero for an enabled timer. If attempted, the timer will be marked disabled (that is, bit 0 cleared) immediately." Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
Split stimer_expiration() into two parts - timer expiration message sending and timer restart/cleanup based on timer state(config). This also fixes a bug where a one-shot timer message whose delivery failed once would get lost for good. Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
This will be used in future to start Hyper-V SynIC timer in several places by one logic in one function. Changes v2: * drop stimer->count == 0 check inside stimer_start() * comment stimer_start() assumptions Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
The function stimer_stop() is called in one place so remove the function and replace it's call by function content. Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Since the numbers now overlap, it makes sense to enumerate them in asm/kvm_host.h rather than linux/kvm_host.h. Functions that refer to architecture-specific requests are also moved to arch/. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Leave room for 4 more arch-independent requests. Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Suggested-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> [Takuya moved all subsequent constants to fill the void, but that is useless in view of the following patches. So this change looks nothing like the original. - Paolo] Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Merge tag 'kvm-s390-next-4.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Feature and fix for 4.5 - allow the runtime instrumentation support inside the guests - remove a useless memory barrier
-
- 07 1月, 2016 5 次提交
-
-
由 Nicholas Krause 提交于
This makes sure the wall clock is updated only after an odd version value is successfully written to guest memory. Signed-off-by: NNicholas Krause <xerofoify@gmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Fan Zhang 提交于
This patch adds runtime instrumentation support for KVM guest. We need to setup a save area for the runtime instrumentation-controls control block(RICCB) and implement the necessary interfaces to live migrate the guest settings. We setup the sie control block in a way, that the runtime instrumentation instructions of a guest are handled by hardware. We also add a capability KVM_CAP_S390_RI to make this feature opt-in as it needs migration support. Signed-off-by: NFan Zhang <zhangfan@linux.vnet.ibm.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Michael S. Tsirkin 提交于
smp_mb on vcpu destroy isn't paired with anything, violating pairing rules, and seems to be useless. Drop it. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Message-Id: <1452010811-25486-1-git-send-email-mst@redhat.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Matlack 提交于
The comment had the meaning of mmu.gva_to_gpa and nested_mmu.gva_to_gpa swapped. Fix that, and also add some details describing how each translation works. Signed-off-by: NDavid Matlack <dmatlack@google.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Merge tag 'kvm-arm-for-4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-next KVM/ARM changes for Linux v4.5 - Complete rewrite of the arm64 world switch in C, hopefully paving the way for more sharing with the 32bit code, better maintainability and easier integration of new features. Also smaller and slightly faster in some cases... - Support for 16bit VM identifiers - Various cleanups
-
- 19 12月, 2015 1 次提交
-
-
由 Takuya Yoshikawa 提交于
Not just in order to clean up the code, but to make it faster by using enhanced instructions: the initialization became 20-30% faster on our testing machine. Signed-off-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 18 12月, 2015 7 次提交
-
-
由 Pavel Fedin 提交于
Before commit 662d9715 ("arm/arm64: KVM: Kill CONFIG_KVM_ARM_{VGIC,TIMER}") is was possible to compile the kernel without vGIC and vTimer support. Commit message says about possibility to detect vGIC support in runtime, but this has never been implemented. This patch introduces runtime check, restoring the lost functionality. It again allows to use KVM on hardware without vGIC. Interrupt controller has to be emulated in userspace in this case. -ENODEV return code from probe function means there's no GIC at all. -ENXIO happens when, for example, there is GIC node in the device tree, but it does not specify vGIC resources. Any other error code is still treated as full stop because it might mean some really serious problems. Signed-off-by: NPavel Fedin <p.fedin@samsung.com> Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Fengguang Wu 提交于
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Vladimir Murzin 提交于
The ARMv8.1 architecture extension allows to choose between 8-bit and 16-bit of VMID, so use this capability for KVM. Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NVladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Vladimir Murzin 提交于
kvm_arm.h is included from both C code and assembly code; however some definitions in this header supplied with U/UL/ULL suffixes which might confuse assembly once they got evaluated. We have _AC macro for such cases, so just wrap problem places with it. Acked-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NVladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Vladimir Murzin 提交于
Since commit a987370f ("arm64: KVM: Fix stage-2 PGD allocation to have per-page refcounting") there is no reference to S2_PGD_ORDER, so kill it for the good. Acked-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NVladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Marc Zyngier 提交于
The debug trapping code is pretty heavy on the "inline" attribute, but most functions are actually referenced in the sysreg tables, making the inlining imposible. Removing the useless inline qualifier seems the right thing to do, having verified that the output code is similar. Cc: Alex Bennée <alex.bennee@linaro.org> Acked-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Marc Zyngier 提交于
David Binderman reported that the exception injection code had a couple of unused variables lingering around. Upon examination, it looked like this code could do with an anticipated spring cleaning, which amounts to deduplicating the CPSR/SPSR update, and making it look a bit more like the architecture spec. The spurious variables are removed in the process. Reported-by: NDavid Binderman <dcb314@hotmail.com> Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
- 17 12月, 2015 14 次提交
-
-
由 Andrey Smetanin 提交于
It's possible that guest send us Hyper-V EOM at the middle of Hyper-V SynIC timer running, so we start processing of Hyper-V SynIC timers in vcpu context and stop the Hyper-V SynIC timer unconditionally: host guest ------------------------------------------------------------------------------ start periodic stimer start periodic timer timer expires after 15ms send expiration message into guest restart periodic timer timer expires again after 15 ms msg slot is still not cleared so setup ->msg_pending (1) restart periodic timer process timer msg and clear slot ->msg_pending was set: send EOM into host received EOM kvm_make_request(KVM_REQ_HV_STIMER) kvm_hv_process_stimers(): ... stimer_stop() if (time_now >= stimer->exp_time) stimer_expiration(stimer); Because the timer was rearmed at (1), time_now < stimer->exp_time and stimer_expiration is not called. The timer then never fires. The patch fixes such situation by not stopping Hyper-V SynIC timer at all, because it's safe to restart it without stop in vcpu context and timer callback always returns HRTIMER_NORESTART. Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Borislav Petkov 提交于
It looks like this in action: kvm [5197]: vcpu0, guest rIP: 0xffffffff810187ba unhandled rdmsr: 0xc001102 and helps to pinpoint quickly where in the guest we did the unsupported thing. Signed-off-by: NBorislav Petkov <bp@suse.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> --- I am sending this as RFC because the error messages it produces are very ugly. Because of inlining, the original line is lost. The alternative is to change vmcs_read/write/checkXX into macros, but then you need to have a single huge BUILD_BUG_ON or BUILD_BUG_ON_MSG because multiple BUILD_BUG_ON* with the same __LINE__ are not supported well.
-
由 Paolo Bonzini 提交于
This was not printing the high parts of several 64-bit fields on 32-bit kernels. Separate from the previous one to make the patches easier to review. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
In theory this should have broken EPT on 32-bit kernels (due to reading the high part of natural-width field GUEST_CR3). Not sure if no one noticed or the processor behaves differently from the documentation. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Li RongQing 提交于
POSTED_INTR_NV is 16bit, should not use 64bit write function [ 5311.676074] vmwrite error: reg 3 value 0 (err 12) [ 5311.680001] CPU: 49 PID: 4240 Comm: qemu-system-i38 Tainted: G I 4.1.13-WR8.0.0.0_standard #1 [ 5311.689343] Hardware name: Intel Corporation S2600WT2/S2600WT2, BIOS SE5C610.86B.01.01.0008.021120151325 02/11/2015 [ 5311.699550] 00000000 00000000 e69a7e1c c1950de1 00000000 e69a7e38 fafcff45 fafebd24 [ 5311.706924] 00000003 00000000 0000000c b6a06dfa e69a7e40 fafcff79 e69a7eb0 fafd5f57 [ 5311.714296] e69a7ec0 c1080600 00000000 00000001 c0e18018 000001be 00000000 00000b43 [ 5311.721651] Call Trace: [ 5311.722942] [<c1950de1>] dump_stack+0x4b/0x75 [ 5311.726467] [<fafcff45>] vmwrite_error+0x35/0x40 [kvm_intel] [ 5311.731444] [<fafcff79>] vmcs_writel+0x29/0x30 [kvm_intel] [ 5311.736228] [<fafd5f57>] vmx_create_vcpu+0x337/0xb90 [kvm_intel] [ 5311.741600] [<c1080600>] ? dequeue_task_fair+0x2e0/0xf60 [ 5311.746197] [<faf3b9ca>] kvm_arch_vcpu_create+0x3a/0x70 [kvm] [ 5311.751278] [<faf29e9d>] kvm_vm_ioctl+0x14d/0x640 [kvm] [ 5311.755771] [<c1129d44>] ? free_pages_prepare+0x1a4/0x2d0 [ 5311.760455] [<c13e2842>] ? debug_smp_processor_id+0x12/0x20 [ 5311.765333] [<c10793be>] ? sched_move_task+0xbe/0x170 [ 5311.769621] [<c11752b3>] ? kmem_cache_free+0x213/0x230 [ 5311.774016] [<faf29d50>] ? kvm_set_memory_region+0x60/0x60 [kvm] [ 5311.779379] [<c1199fa2>] do_vfs_ioctl+0x2e2/0x500 [ 5311.783285] [<c11752b3>] ? kmem_cache_free+0x213/0x230 [ 5311.787677] [<c104dc73>] ? __mmdrop+0x63/0xd0 [ 5311.791196] [<c104dc73>] ? __mmdrop+0x63/0xd0 [ 5311.794712] [<c104dc73>] ? __mmdrop+0x63/0xd0 [ 5311.798234] [<c11a2ed7>] ? __fget+0x57/0x90 [ 5311.801559] [<c11a2f72>] ? __fget_light+0x22/0x50 [ 5311.805464] [<c119a240>] SyS_ioctl+0x80/0x90 [ 5311.808885] [<c1957d30>] sysenter_do_call+0x12/0x12 [ 5312.059280] kvm: zapping shadow pages for mmio generation wraparound [ 5313.678415] kvm [4231]: vcpu0 disabled perfctr wrmsr: 0xc2 data 0xffff [ 5313.726518] kvm [4231]: vcpu0 unhandled rdmsr: 0x570 Signed-off-by: NLi RongQing <roy.qing.li@gmail.com> Cc: Yang Zhang <yang.z.zhang@Intel.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
Per Hyper-V specification (and as required by Hyper-V-aware guests), SynIC provides 4 per-vCPU timers. Each timer is programmed via a pair of MSRs, and signals expiration by delivering a special format message to the configured SynIC message slot and triggering the corresponding synthetic interrupt. Note: as implemented by this patch, all periodic timers are "lazy" (i.e. if the vCPU wasn't scheduled for more than the timer period the timer events are lost), regardless of the corresponding configuration MSR. If deemed necessary, the "catch up" mode (the timer period is shortened until the timer catches up) will be implemented later. Changes v2: * Use remainder to calculate periodic timer expiration time Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: Vitaly Kuznetsov <vkuznets@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
The SynIC message protocol mandates that the message slot is claimed by atomically setting message type to something other than HVMSG_NONE. If another message is to be delivered while the slot is still busy, message pending flag is asserted to indicate to the guest that the hypervisor wants to be notified when the slot is released. To make sure the protocol works regardless of where the message sources are (kernel or userspace), clear the pending flag on SINT ACK notification, and let the message sources compete for the slot again. Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: Vitaly Kuznetsov <vkuznets@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
This helper will be used also in Hyper-V SynIC timers implementation. Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: Vitaly Kuznetsov <vkuznets@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: Vitaly Kuznetsov <vkuznets@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
This rearrangement places functions declarations together according to their functionality, so future additions will be simplier. Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: Vitaly Kuznetsov <vkuznets@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
This struct is required for Hyper-V SynIC timers implementation inside KVM and for upcoming Hyper-V VMBus support by userspace(QEMU). So place it into Hyper-V UAPI header. Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: Vitaly Kuznetsov <vkuznets@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
This struct is required for Hyper-V SynIC timers implementation inside KVM and for upcoming Hyper-V VMBus support by userspace(QEMU). So place it into Hyper-V UAPI header. Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Acked-by: NK. Y. Srinivasan <kys@microsoft.com> Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: Vitaly Kuznetsov <vkuznets@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
This constant is required for Hyper-V SynIC timers MSR's support by userspace(QEMU). Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Acked-by: NK. Y. Srinivasan <kys@microsoft.com> Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: Vitaly Kuznetsov <vkuznets@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-