Pull powerpc fixes from Ben Herrenschmidt:
 "Here are a handful of powerpc fixes for 3.13.

  The patches are reasonably trivial and self contained.  Note the offb
  patches outside of arch/powerpc, they are LE fixes for our
  open-firmware 'dumb' framebuffer"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Fix up the kdump base cap to 128M
  powernv: Fix VFIO support with PHB3
  powerpc/52xx: Re-enable bestcomm driver in defconfigs
  powerpc/pasemi: Turn on devtmpfs in defconfig
  offb: Add palette hack for little endian
  offb: Little endian fixes
  powerpc: Fix PTE page address mismatch in pgtable ctor/dtor
  powerpc/44x: Fix ocm_block allocation
  powerpc: Fix build break with PPC_EARLY_DEBUG_BOOTX=y
  powerpc/512x: dts: remove misplaced IRQ spec from 'soc' node

The current logic sets the kdump base to min of 2G or ppc64_rma_size/2.
On PowerNV kernel the first memory block 'memory@0' can be very large,
equal to the DIMM size with ppc64_rma_size value capped to 1G. Hence on
PowerNV, kdump base is set to 512M resulting kdump to fail while allocating
paca array. This is because, paca need its memory from RMA region capped
at 256M (see allocate_pacas()).

This patch lowers the kdump base cap to 128M so that kdump kernel can
successfully get memory below 256M for paca allocation.
Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

I have recently found out that no iommu_groups could be found under
/sys/ on a P8. That prevents PCI passthrough from working.

During my investigation, I found out there seems to be a missing
iommu_register_group for PHB3. The following patch seems to fix the
problem. After applying it, I see iommu_groups under
/sys/kernel/iommu_groups/, and can also bind vfio-pci to an adapter,
which gives me a device at /dev/vfio/.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The bestcomm driver has been moved to drivers/dma, so to select
this driver by default additionally CONFIG_DMADEVICES has to be
enabled. Currently it is not enabled in the config despite existing
CONFIG_PPC_BESTCOMM=y in the config files. Fix it.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

At least some distros expect it these days; turn it on. Also, random
churn from doing a savedefconfig for the first time in a year or so.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The pseudo palette color entries need to be ajusted for little
endian.

This patch byteswaps the values in the pseudo palette depending
on the host endian order and the screen depth.
Signed-off-by: NCédric Le Goater <clg@fr.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The "screen" properties : depth, width, height, linebytes need
to be converted to the host endian order when read from the device
tree.

The offb_init_palette_hacks() routine also made assumption on the
host endian order.
Signed-off-by: NCédric Le Goater <clg@fr.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

In pte_alloc_one(), pgtable_page_ctor() is passed an address that has
not been converted by page_address() to the newly allocated PTE page.

When the PTE is freed, __pte_free_tlb() calls pgtable_page_dtor()
with an address to the PTE page that has been converted by page_address().
The mismatch in the PTE's page address causes pgtable_page_dtor() to access
invalid memory, so resources for that PTE (such as the page lock) is not
properly cleaned up.

On PPC32, only SMP kernels are affected.

On PPC64, only SMP kernels with 4K page size are affected.

This bug was introduced by commit d614bb04
"powerpc: Move the pte free routines from common header".

On a preempt-rt kernel, a spinlock is dynamically allocated for each
PTE in pgtable_page_ctor().  When the PTE is freed, calling
pgtable_page_dtor() with a mismatched page address causes a memory leak,
as the pointer to the PTE's spinlock is bogus.

On mainline, there isn't any immediately obvious symptoms, but the
problem still exists here.

Fixes: d614bb04 "powerpc: Move the pte free routes from common header"
Cc: Paul Mackerras <paulus@samba.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linux-stable <stable@vger.kernel.org> # v3.10+
Signed-off-by: NHong H. Pham <hong.pham@windriver.com>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Allocate enough memory for the ocm_block structure, not just a pointer
to it.
Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

A kernel configured with PPC_EARLY_DEBUG_BOOTX=y but PPC_PMAC=n and
PPC_MAPLE=n will fail to link:

  btext.c:(.text+0x2d0fc): undefined reference to `.rmci_off'
  btext.c:(.text+0x2d214): undefined reference to `.rmci_on'

Fix it by making the build of rmci_on/off() depend on
PPC_EARLY_DEBUG_BOOTX, which also enable the only code that uses them.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Anatolij Gustschin says:

<<
Please pull a device tree fix for v3.13. The booting on mpc512x
is broken since v3.13-rc1, this patch repairs it.
>>

Pull drm fixes from Dave Airlie:
 "This is probably a bit big, but just because I fell behind last week
  and didn't get to doing any pulls, so stuff backed up behind me, I
  actually should have sent this for -rc3 but failed to even manage
  that.

  So this has radeon, intel, nouveau, vmware, exynos and tegra fixes in
  it, and the line count isn't all the bad in the end"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (50 commits)
  drm: fix the addition of the side-by-side (half) flag for extra 3D modes
  drm/edid: fix length check when adding extra 3D modes
  drm/radeon/atom: fix bus probes when hw_i2c is set (v2)
  drm/radeon: fix null pointer dereference in dce6+ audio code
  drm/radeon: fixup bad vram size on SI
  udl: fix issue with imported prime buffers
  drm/vmwgfx: Add our connectors to sysfs
  drm/vmwgfx: Fix dma buffer memory size accounting
  drm/vmwgfx: Fix up and comment the dumb buffer implementation
  drm/vmwgfx: Correctly set the enabled state on crtcs
  drm/nv50/disp: min/max are reversed in nv50_crtc_gamma_set()
  drm/nouveau/sw: fix oops if gpu has its display block disabled
  drm/nouveau: unreference fence after syncing
  drm/nouveau/kms: send timestamp data for correct head in flip completion events
  drm/nouveau/clk: Add support for NVAA/NVAC
  drm/nouveau/fifo: Hook up pause and resume for NV50 and NV84+
  drm/nv10/plane: some chipsets don't support NV12
  drm/nv10/plane: add downscaling restrictions
  drm/nv10/plane: fix format computation
  drm/nv04-nv30/clk: provide an empty domain list
  ...

Pull mfd fixes from Samuel Ortiz:
 "This is the first 3.13 pull request for MFD fixes.  We have:

   - A ti-ssp build failure fix
   - An as3722 build failure fix
   - An lpc_ich copy paste error fix"

* tag 'mfd-fixes-3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes:
  mfd: lpc_ich: Fix Wildcat Point info name field
  mfd: ti-ssp: Fix build
  mfd: Make MFD_AS3722 depend on I2C=y

Pull power management fixup from Rafael Wysocki:
 "This reverts two cpufreq commits that fixed issues for some people,
  but broke things for others, so revert them and we'll need to fix the
  original problems differently"

* tag 'pm-3.13-rc3-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "cpufreq: fix garbage kobjects on errors during suspend/resume"
  Revert "cpufreq: suspend governors on system suspend/hibernate"

Pull input updates from Dmitry Torokhov:
 "An update to ALPS to support devices on Dell XT2 (hopefully working
  better this time around and although it is largish it should not
  affect any other ALPS devices) and a tiny update to Elantech driver to
  support newer devices as well.

  Also a coupe of new input event codes have been defined"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ALPS - add support for DualPoint device on Dell XT2 model
  Input: elantech - add support for newer (August 2013) devices
  Input: add SW_MUTE_DEVICE switch definition
  Input: usbtouchscreen - separate report and transmit buffer size handling
  Input: sur40 - suppress false uninitialized variable warning
  Input: add key code for ambient light sensor button
  Input: keyboard - "keycode & KEY_MAX" changes some keycode values

Pull crypto fix from Herbert Xu:
 "Unfortunately the last push that fixed a crash in the crypto
  scatterwalk code introduced a new crash when SG debugging is enabled.
  This fixes that"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: scatterwalk - Use sg_chain_ptr on chain entries

Now that scatterwalk_sg_chain sets the chain pointer bit the sg_page
call in scatterwalk_sg_next hits a BUG_ON when CONFIG_DEBUG_SG is
enabled. Use sg_chain_ptr instead of sg_page on a chain entry.

Cc: stable@vger.kernel.org
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Pull tty fix from Greg KH:
 "Here is a single n_tty fix for 3.13-rc3 that resolves a regression in
  3.12 that has been reported"

* tag 'tty-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  n_tty: Fix missing newline echo

Pull staging driver fixes from Greg KH:
 "Here are some bugfixes for the staging and IIO drivers for 3.13-rc3.

  The resolve the vm memory issue in the tidspbridge driver, fix a
  much-reported build failure in an ARM driver, and some other IIO
  bugfixes that have been reported"

* tag 'staging-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  Staging: TIDSPBRIDGE: Use vm_iomap_memory for mmap-ing instead of remap_pfn_range
  Fix build failure for gp2ap020a00f.c
  iio: hid-sensors: Fix power and report state
  HID: hid-sensor-hub: Add logical min and max

Pull char/misc driver fixes from Greg KH:
 "Nothing huge, just a few small bugfixes for problems reported, and a
  device id update"

* tag 'char-misc-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  mei: add 9 series PCH mei device ids
  drivers/char/i8k.c: add Dell XPLS L421X
  MAINTAINERS: add HSI subsystem
  misc: mic: Suppress memory space sparse warnings
  misc: mic: Fix endianness issues.
  misc: mic: Fix user space namespace pollution from mic_common.h.
  misc: mic: Bug fix for sysfs poll usage.
  misc: mic: Minor bug fix in 'retry' loops.
  misc: mic: Change mic_notify(...) to return true.
  extcon: remove freed groups caused the panic or warning in unregister flow
  extcon: arizona: Get pdata from arizona structure not device

Pull USB fixes from Greg KH:
 "Here are a bunch of USB fixes for 3.13-rc3.

  Nothing major, but we seem to have an argument about a XHCI fix, so
  I'm not including a revert that Sarah requested, because that breaks a
  USB network driver, and I can't revert the USB network driver fix
  without reintroducing other bugs that it fixed.  So as it is,
  everything should now be working.  Worse case, I can revert the XHCI
  fix before 3.13-final is out, but it seems to work well here with my
  testing, so all should be good.

  Other than that, some driver updates based on reports"

* tag 'usb-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
  usb: hub: Use correct reset for wedged USB3 devices that are NOTATTACHED
  usb: ohci-pxa27x: include linux/dma-mapping.h
  USB: cdc-acm: Added support for the Lenovo RD02-D400 USB Modem
  usb: tools: fix a regression issue that gcc can't link to pthread
  USB: switch maintainership of chipidea to Peter
  USB: pl2303: fixed handling of CS5 setting
  USB: ftdi_sio: fixed handling of unsupported CSIZE setting
  USB: mos7840: correct handling of CS5 setting
  USB: spcp8x5: correct handling of CS5 setting
  usb: wusbcore: fix deadlock in wusbhc_gtk_rekey
  usb: wusbcore: do device lookup while holding the hc mutex
  usb: wusbcore: send keepalives to unauthenticated devices
  USB: option: support new huawei devices
  USB: serial: option: blacklist interface 1 for Huawei E173s-6
  usb: xhci: Link TRB must not occur within a USB payload burst
  usb: gadget: f_mass_storage: call try_to_freeze only when its safe
  usb: gadget: tcm_usb_gadget: mark bot_cleanup_old_alt static
  usb: gadget: ffs: fix sparse warning
  usb: gadget: zero: module parameters can be static
  usb: gadget: storage: fix sparse warning
  ...

Pull ARM64 fixes from Catalin Marinas:
 - Page table fixes (PROT_NONE, shareability attribute, TLB
   invalidation)
 - Secondary CPUs entry endianness fix
 - Make NR_CPUS default to 8

* tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
  arm64: mm: Fix PMD_SECT_PROT_NONE definition
  arm64: Fix memory shareability attribute for ioremap_wc/cache
  arm64: kernel: add code to set cpu boot mode to secondary_entry shim
  arm64: make default NR_CPUS 8
  arm64: ensure completion of TLB invalidatation

Commit 2167e239 (cpufreq: fix garbage kobjects on errors during
suspend/resume) breaks suspend/resume on Martin Ziegler's system
(hard lockup during resume), so revert it.

Fixes: 2167e239 (cpufreq: fix garbage kobjects on errors during suspend/resume)
References: https://bugzilla.kernel.org/show_bug.cgi?id=66751Reported-by: NMartin Ziegler <ziegler@uni-freiburg.de>
Cc: 3.12+ <stable@vger.kernel.org> # 3.12+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Commit 5a87182a (cpufreq: suspend governors on system
suspend/hibernate) causes hibernation problems to happen on
Bjørn Mork's and Paul Bolle's systems, so revert it.

Fixes: 5a87182a (cpufreq: suspend governors on system suspend/hibernate)
Reported-by: NBjørn Mork <bjorn@mork.no>
Reported-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

the 'soc' node in the common .dtsi for MPC5121 has an '#interrupt-cells'
property although this node is not an interrupt controller

remove this erroneously placed property because starting with v3.13-rc1
lookup and resolution of 'interrupts' specs for peripherals gets misled,
emits 'no irq domain found' WARN() messages and breaks the boot process

  irq: no irq domain found for /soc@80000000 !
  ------------[ cut here ]------------
  WARNING: at drivers/of/platform.c:171
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper Tainted: G        W    3.13.0-rc1-00001-g8a66234 #8
  task: df823bb0 ti: df834000 task.ti: df834000
  NIP: c02b5190 LR: c02b5180 CTR: c01cf4e0
  REGS: df835c50 TRAP: 0700   Tainted: G        W     (3.13.0-rc1-00001-g8a66234)
  MSR: 00029032 <EE,ME,IR,DR,RI>  CR: 229a9d42  XER: 20000000

  GPR00: c02b5180 df835d00 df823bb0 00000000 00000000 df835b18 ffffffff 00000308
  GPR08: c0479cc0 c0480000 c0479cc0 00000308 00000308 00000000 c00040fc 00000000
  GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 df850880
  GPR24: df84d670 00000000 00000001 df8561a0 dffffccc df85089c 00000020 00000001
  NIP [c02b5190] of_device_alloc+0xf4/0x1a0
  LR [c02b5180] of_device_alloc+0xe4/0x1a0
  Call Trace:
  [df835d00] [c02b5180] of_device_alloc+0xe4/0x1a0 (unreliable)
  [df835d50] [c02b5278] of_platform_device_create_pdata+0x3c/0xc8
  [df835d70] [c02b53fc] of_platform_bus_create+0xf8/0x170
  [df835dc0] [c02b5448] of_platform_bus_create+0x144/0x170
  [df835e10] [c02b55a8] of_platform_bus_probe+0x98/0xe8
  [df835e30] [c0437508] mpc512x_init+0x28/0x1c4
  [df835e70] [c0435de8] ppc_init+0x4c/0x60
  [df835e80] [c0003b28] do_one_initcall+0x150/0x1a4
  [df835ef0] [c0432048] kernel_init_freeable+0x114/0x1c0
  [df835f30] [c0004114] kernel_init+0x18/0x124
  [df835f40] [c000e910] ret_from_kernel_thread+0x5c/0x64
  Instruction dump:
  409effd4 57c9103a 57de2834 7c89f050 7f83e378 7c972214 7f45d378 48001f55
  7c63d278 7c630034 5463d97e 687a0001 <0f1a0000> 2f990000 387b0010 939b0098
  ---[ end trace 2257f10e5a20cbdd ]---

  ...
  irq: no irq domain found for /soc@80000000 !
  fsl-diu-fb 80002100.display: could not get DIU IRQ
  fsl-diu-fb: probe of 80002100.display failed with error -22
  irq: no irq domain found for /soc@80000000 !
  mpc512x_dma 80014000.dma: Error mapping IRQ!
  mpc512x_dma: probe of 80014000.dma failed with error -22
  ...
  irq: no irq domain found for /soc@80000000 !
  fs_enet: probe of 80002800.ethernet failed with error -22
  ...
  irq: no irq domain found for /soc@80000000 !
  mpc5121-rtc 80000a00.rtc: mpc5121_rtc_probe: could not request irq: 0
  mpc5121-rtc: probe of 80000a00.rtc failed with error -22
  ...

Cc: Anatolij Gustschin <agust@denx.de>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: devicetree@vger.kernel.org
Signed-off-by: NGerhard Sittig <gsi@denx.de>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

Modify the value of PMD_SECT_PROT_NONE to match that of PTE_NONE. This
should have been in commit 3676f9ef (Move PTE_PROT_NONE higher up).
Signed-off-by: NSteve Capper <steve.capper@linaro.org>
Cc: <stable@vger.kernel.org> # 3.11+: 3676f9ef: arm64: Move PTE_PROT_NONE higher up
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Write-combine and cacheable mappings use Normal memory on arm64. On SMP
systems, the pte needs the shareability bit which is set in
pgprot_default. Use this for defining PROT_DEFAULT used by ioremap_wc
and ioremap_cache (Device memory is shareable by default, does not need
additional attributes).
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The refactoring of el2_setup split code setting up EL2 and detecting the
CPU boot mode in separate chunks. This allows the code that sets up EL2 to
run in an endian independent way - ie before the endianess is set up in
the respective sctlr registers.

This patch brings secondary_entry up-to-date so that CPUs entering the
kernel through this code path set-up EL2 and the cpu boot mode properly.
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NMark Rutland <mark.rutand@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Rather than continue to add per platform defaults, make the default a
likely common core count. 8 is also the default for x86.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Currently there is no dsb between the tlbi in __cpu_setup and the write
to SCTLR_EL1 which enables the MMU in __turn_mmu_on. This means that the
TLB invalidation is not guaranteed to have completed at the point
address translation is enabled, leading to a number of possible issues
including incorrect translations and TLB conflict faults.

This patch moves the tlbi in __cpu_setup above an existing dsb used to
synchronise I-cache invalidation, ensuring that the TLBs have been
invalidated at the point the MMU is enabled.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Merge tag 'trace-fixes-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
 "A regression showed up that there's a large delay when enabling all
  events.  This was prevalent when FTRACE_SELFTEST was enabled which
  enables all events several times, and caused the system bootup to
  pause for over a minute.

  This was tracked down to an addition of a synchronize_sched()
  performed when system call tracepoints are unregistered.

  The synchronize_sched() is needed between the unregistering of the
  system call tracepoint and a deletion of a tracing instance buffer.
  But placing the synchronize_sched() in the unreg of *every* system
  call tracepoint is a bit overboard.  A single synchronize_sched()
  before the deletion of the instance is sufficient"

* tag 'trace-fixes-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Only run synchronize_sched() at instance deletion time

Pull aio fix from Benjamin LaHaise:
 "AIO fix from Gu Zheng that fixes a GPF that Dave Jones uncovered with
  trinity"

* git://git.kvack.org/~bcrl/aio-next:
  aio: clean up aio ring in the fail path

Pull SCSI fixes from James Bottomley:
 "This is a set of nine fixes (and one author update).

  The libsas one should fix discovery in eSATA devices, the WRITE_SAME
  one is the largest, but it should fix a lot of problems we've been
  getting with the emulated RAID devices (they've been effectively lying
  about support and then firmware has been choking on the commands).

  The rest are various crash, hang or warn driver fixes"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] bfa: Fix crash when symb name set for offline vport
  [SCSI] enclosure: fix WARN_ON in dual path device removing
  [SCSI] pm80xx: Tasklets synchronization fix.
  [SCSI] pm80xx: Resetting the phy state.
  [SCSI] pm80xx: Fix for direct attached device.
  [SCSI] pm80xx: Module author addition
  [SCSI] hpsa: return 0 from driver probe function on success, not 1
  [SCSI] hpsa: do not discard scsi status on aborted commands
  [SCSI] Disable WRITE SAME for RAID and virtual host adapter drivers
  [SCSI] libsas: fix usage of ata_tf_to_fis

Pull IMA fixes from James Morris:
 "Here are two more fixes for IMA"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  ima: properly free ima_template_entry structures
  ima: Do not free 'entry' before it is initialized

Pull devicetree fixes from Rob Herring:
 - Various DT binding documentation updates
 - Add Kumar Gala and remove Stephen Warren as DT binding maintainers

* tag 'dt-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt: binding: reword PowerPC 8xxx GPIO documentation
  ARM: tegra: delete nvidia,tegra20-spi.txt binding
  hwmon: ntc_thermistor: Fix typo (pullup-uV -> pullup-uv)
  of: add vendor prefix for GMT
  clk: exynos: Fix typos in DT bindings documentation
  of: Add vendor prefix for LG Corporation
  Documentation: net: fsl-fec.txt: Add phy-supply entry
  ARM: dts: doc: Document missing binding for omap5-mpu
  dt-bindings: add ARMv8 PMU binding
  MAINTAINERS: remove swarren from DT bindings
  MAINTAINERS: Add Kumar to Device Tree Binding maintainers group

Clean up the aio ring file in the fail path of aio_setup_ring
and ioctx_alloc. And maybe it can fix the GPF issue reported by
Dave Jones:
https://lkml.org/lkml/2013/11/25/898Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

Merge branch 'free-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into for-linus

Pull power management fixes from Rafael Wysocki:

 - cpufreq regression fix from Bjørn Mork restoring the pre-3.12
   behavior of the framework during system suspend/hibernation to avoid
   garbage sysfs files from being left behind in case of a suspend error

 - PNP regression fix to restore the correct states of devices after
   resume from hibernation broken in 3.12.  From Dmitry Torokhov.

 - cpuidle fix to prevent cpuidle device unregistration from crashing
   due to a NULL pointer dereference if cpuidle has been disabled from
   the kernel command line.  From Konrad Rzeszutek Wilk.

 - intel_idle fix for the C6 state definition on Intel Avoton/Rangeley
   processors from Arne Bockholdt.

 - Power capping framework fix to make the energy_uj sysfs attribute
   work in accordance with the documentation.  From Srinivas Pandruvada.

 - epoll fix to make it ignore the EPOLLWAKEUP flag if the kernel has
   been compiled with CONFIG_PM_SLEEP unset (in which case that flag
   should not have any effect).  From Amit Pundir.

 - cpufreq fix to prevent governor sysfs files from being lost over
   system suspend/resume in some (arguably unusual) situations.  From
   Viresh Kumar.

* tag 'pm-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PowerCap: Fix mode for energy counter
  PNP: fix restoring devices after hibernation
  cpuidle: Check for dev before deregistering it.
  epoll: drop EPOLLWAKEUP if PM_SLEEP is disabled
  cpufreq: fix garbage kobjects on errors during suspend/resume
  cpufreq: suspend governors on system suspend/hibernate
  intel_idle: Fixed C6 state on Avoton/Rangeley processors

* pm-epoll:
  epoll: drop EPOLLWAKEUP if PM_SLEEP is disabled

* pnp:
  PNP: fix restoring devices after hibernation

* powercap:
  PowerCap: Fix mode for energy counter