- 27 6月, 2006 1 次提交
-
-
由 Akinobu Mita 提交于
This patch converts the combination of list_del(A) and list_add(A, B) to list_move(A, B) under drivers/. Acked-by: NCorey Minyard <minyard@mvista.com> Cc: Ben Collins <bcollins@debian.org> Acked-by: NRoland Dreier <rolandd@cisco.com> Cc: Alasdair Kergon <dm-devel@redhat.com> Cc: Gerd Knorr <kraxel@bytesex.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Frank Pavlic <fpavlic@de.ibm.com> Acked-by: NMatthew Wilcox <matthew@wil.cx> Cc: Andrew Vasquez <linux-driver@qlogic.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: NAkinobu Mita <mita@miraclelinux.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 25 6月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit 786dc1d3. As Al so eloquently points out, the patch is crap. The old code was fine, the new code was bogus. It never dereferenced a user pointer, the "->" operator was to an array member, which gives the _address_ of the member (in user space), not an actual dereference at all. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 23 6月, 2006 4 次提交
-
-
由 Jens Axboe 提交于
A process flag to indicate whether we are doing sync io is incredibly ugly. It also causes performance problems when one does a lot of async io and then proceeds to sync it. Part of the io will go out as async, and the other part as sync. This causes a disconnect between the previously submitted io and the synced io. For io schedulers such as CFQ, this will cause us lost merges and suboptimal behaviour in scheduling. Remove PF_SYNCWRITE completely from the fsync/msync paths, and let the O_DIRECT path just directly indicate that the writes are sync by using WRITE_SYNC instead. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jean-Luc Leger 提交于
Default values for boolean and tristate options can only be 'y', 'm' or 'n'. This patch removes wrong default for USB_ISP116X_HCD, USB_SL811_HCD and USB_SL811_CS. Signed-off-by: NJean-Luc Leger <jean-luc.leger@dspnet.fr.eu.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Howells 提交于
Extend the get_sb() filesystem operation to take an extra argument that permits the VFS to pass in the target vfsmount that defines the mountpoint. The filesystem is then required to manually set the superblock and root dentry pointers. For most filesystems, this should be done with simple_set_mnt() which will set the superblock pointer and then set the root dentry to the superblock's s_root (as per the old default behaviour). The get_sb() op now returns an integer as there's now no need to return the superblock pointer. This patch permits a superblock to be implicitly shared amongst several mount points, such as can be done with NFS to avoid potential inode aliasing. In such a case, simple_set_mnt() would not be called, and instead the mnt_root and mnt_sb would be set directly. The patch also makes the following changes: (*) the get_sb_*() convenience functions in the core kernel now take a vfsmount pointer argument and return an integer, so most filesystems have to change very little. (*) If one of the convenience function is not used, then get_sb() should normally call simple_set_mnt() to instantiate the vfsmount. This will always return 0, and so can be tail-called from get_sb(). (*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the dcache upon superblock destruction rather than shrink_dcache_anon(). This is required because the superblock may now have multiple trees that aren't actually bound to s_root, but that still need to be cleaned up. The currently called functions assume that the whole tree is rooted at s_root, and that anonymous dentries are not the roots of trees which results in dentries being left unculled. However, with the way NFS superblock sharing are currently set to be implemented, these assumptions are violated: the root of the filesystem is simply a dummy dentry and inode (the real inode for '/' may well be inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries with child trees. [*] Anonymous until discovered from another tree. (*) The documentation has been adjusted, including the additional bit of changing ext2_* into foo_* in the documentation. [akpm@osdl.org: convert ipath_fs, do other stuff] Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Nathan Scott <nathans@sgi.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Kroah-Hartman 提交于
Yeah, it's a hack, but it is only temporary until Alan's patches reworking this area make it in. We really should not care what devices below us are doing, especially when we do not really know what type of devices they are. This patch relies on the fact that the endpoint devices do not have a driver assigned to us. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 22 6月, 2006 34 次提交
-
-
由 Greg Kroah-Hartman 提交于
Now /sys/class/usb is dynamically created when we have something to put in it, and removed when all devices go away. Just trying to cut down on the clutter in sysfs... Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This moves the usb class devices that control the usbfs nodes to show up in the proper place in the larger device tree. No userspace changes is needed, this is compatible due to the symlinks generated by the driver core. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This will allow for us to give endpoints a major/minor to create a "usbfs2-like" way to access endpoints directly from userspace in an easier manner than the current usbfs provides us. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Instead of a kobject, will make things easier in the future (don't know what I was thinking when I did this originally...) Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
This makes it easier to modify in the future without touching anything else. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
Move <linux/usb_input.h> to <linux/usb/input.h> and remove some redundant includes. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
This moves header files for controller-specific platform data from <linux/usb_XXX.h> to <linux/usb/XXX.h> to start reducing some clutter. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
This moves <linux/usb_cdc.h> to <linux/usb/cdc.h> to reduce some of the clutter of usb header files. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
This removes extraneous whitespace from the Ethernet/RNDIS gadget driver. It's all space-at-EOL, spaces-before-tabs, or tabs-then-spaces. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
Here is a patch (as720) adding an unusual_devs entry for the Nokia N80 mobile phone. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
Some usbserial functions returns -EINVAL if the port doesn't exist or if it's not opened. However, the right error code for such situations is -ENODEV. Signed-off-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Milan Svoboda 提交于
This patch adds IXP465 into the list of known devices and adds IXP425 and IXP465 to the list of devices that have cfr. This is not described in the hardware documentation, but without it driver won't work. Workaround (#if 1) that seemed to get rid of lost status irqs is disabled for IXP4XX as it caused freezes during testing of control messages. No lost irqs are visible on IXP4XX. Driver survived tests running over night without any visible problems. Signed-off-by: NMilan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Milan Svoboda 提交于
This patch fixes compile errors when pxa2xx_udc is to be compiled for ixp4xx platform. Signed-off-by: NMilan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Milan Svoboda 提交于
This patch removes limitation which prevents use of drivers that support speeds different that full speed. Signed-off-by: NMilan Svoboda <msvoboda@ra.rockwell.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Franck Bui-Huu 提交于
As pointed out by David Brownell, we know that IRQs are never blocked when calling gs_close function. So the save/restore IRQ flags are pointless. Signed-off-by: NFranck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Franck Bui-Huu 提交于
When closing the device, the driver acquires/release twice the port lock before/after waiting for the data to be completely sent. Therefore it will dead lock. This patch fixes it and also uses the generic scheduler services for waiting for an event. Signed-off-by: NFranck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Frank Gevaerts 提交于
If either the driver's open() method or try_module_get() fails, we need to set 'tty->driver_data' and 'port->tty' to NULL in serial_open(), otherwise we'll get an OOPS in usb_device_disconnect() when the device is disconnected. Signed-off-by: NFrank Gevaerts <frank.gevaerts@fks.be> Acked-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Matt Reimer 提交于
Acked-by: NDavid Brownell <david-b@pacbell.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Bock 提交于
This is a new driver for the Cypress CY7C63xxx mirco controller series. It currently supports the pre-programmed CYC63001A-PC by AK Modul-Bus GmbH. It's based on a kernel 2.4 driver (cyport) by Marcus Maul which I ported to kernel 2.6 using sysfs. I intend to support more controllers of this family (and more features) as soon as I get hold of the required IDs etc. Please see the source code's header for more information. Signed-off-by: NOliver Bock <o.bock@fh-wolfenbuettel.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
Implement the "error" event in usbmon. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
This update contains one bug fix: some lines can come out truncated, because of the safety cutoff. This happened because I forgot to update the size when status packets began to be printed. The rest is: - Comments updates - Allow snooping with pkmap on x86_64, which is cache-coherent - Enlarge event buffers (certainly we can have a couple of pages) - Add event counter First touch upon usbmon for 2.6.18. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Pete Zaitcev 提交于
Al Borchers suggested to do this in his review of my previous patch. I guess that I skipped this initially because of my visceral dislike of sizeof(data). But in this case it seems well localized. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Timothy Sipples 提交于
Adds vendor & product IDs to drivers/usb/serial/airprime.c for Kyocera Wireless KPC650/Passport EV-DO/1xRTT PC Cards. Signed-off-by: NTimothy Sipples <Timothy.Sipples@us.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as707) improves the FSBR operation in uhci-hcd by turning it off more quickly when it isn't needed. FSBR puts a noticeable load on a computer's PCI bus, so it should be disabled as soon as possible when it isn't in use. The patch leaves it running for only 10 ms after the last URB stops using it, on the theory that this should be long enough for a driver to submit another URB if it wants keep FSBR going. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as706) removes the private hc_inaccessible flag from uhci-hcd. It's not needed because it conveys exactly the same information as the generic HCD_FLAG_HW_ACCESSIBLE bit. In its place goes a new flag recording whether the controller is dead. The new code allows a complete device reset to resurrect a dead controller (although usbcore doesn't yet implement such a facility). Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 David Brownell 提交于
This patch (as705) contains a small set of updates for uhci-hcd written mostly by Dave Brownell: * Root hub suspend messages come out labeled as root hub messages; PCI messages should only come out when the pci device suspends. * Rename the reset() method to better match its init() role * Behave more like the other HCDs by returning -ESHUTDOWN for root-hub suspend/resume errors. * When an URB fails, associate the message with the usb device not the host controller (it still hides endpoint and direction) From: David Brownell <david-b@pacbell.net> Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as704) adds an unusual_devs entry for the Nikon DSC D70s, which uses a different Product ID from the D70. It also moves the entry for the DSC E2000 up in the list, to preserve the numerical ordering. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Rene Rebe 提交于
This adds the Apple MacBook product IDs for the Fn translation to the usbhid. Signed-off-by: NRene Rebe <rene@exactcode.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ralf Baechle 提交于
Including ehci-au1xxx.c on a non-Au1200 Alchemy only to have it throw an error is stupid. From: Ralf Baechle <ralf@linux-mips.org> Acked-by: NDavid Brownell <david-b@pacbell.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Chris Lund 提交于
While an Edgeport is allocating individual port structures, if kmalloc returns NULL, the serial structure is freed and -ENOMEM, but the ports allocated before the failure are not freed. This patch addresses that condition. Signed-off-by: NChristopher Lund <docmax@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Matthias Urlichs 提交于
This patch extends the "option" driver with a few more devices, some of which are actually connected to USB the "right" way -- as opposed to doing it via PCMCIA and OHCI. Signed-Off-By: NMatthias Urlichs <smurf@debian.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Philippe Retornaz 提交于
See http://bugzilla.kernel.org/show_bug.cgi?id=6617. This function dereference a __user pointer. Signed-off-by: NPhilippe Retornaz <couriousous@mandriva.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as703) improves the error handling when a Set-Configuration request fails. The old interfaces are all unregistered before the request is sent, and if the request fails then we don't know what config the device is using. So it makes no sense to leave actconfig pointing to the old configuration with its invalid interfaces. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-