Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 08 5月, 2013 8 次提交
  3. 07 5月, 2013 6 次提交
  5. 06 5月, 2013 9 次提交
  7. 05 5月, 2013 11 次提交
  9. 04 5月, 2013 6 次提交
    • J
      hwmon: (lm75) Add support for the Dallas/Maxim DS7505 · 3fbc81e3
      由 Jean Delvare 提交于 
      Basically it's the same as the original DS75 but much faster.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NGuenter Roeck <linux@roeck-us.net>
      3fbc81e3
    • J
      hwmon: (lm75) Tune resolution and sample time per chip · 0cd2c72d
      由 Jean Delvare 提交于 
      Most LM75-compatible chips can either sample much faster or with a
much better resolution than the original LM75 chip. So far the lm75
driver did not let the user take benefit of these improvements. Do it
now.

I decided to almost always configure the chip to use the best
resolution possible, which also means the longest sample time. The
only chips for which I didn't are the DS75, DS1775 and STDS75, because
they are really too slow in 12-bit mode (1.2 to 1.5 second worst case)
so I went for 11-bit mode as a more reasonable tradeoff. This choice is
dictated by the fact that the hwmon subsystem is meant for system
monitoring, it has never been supposed to be ultra-fast, and as a
matter of fact we do cache the sampled values in almost all drivers.

If anyone isn't pleased with these default settings, they can always
introduce a platform data structure or DT support for the lm75. That
being said, it seems nobody ever complained that the driver wouldn't
refresh the value faster than every 1.5 second, and the change made
it faster for all chips even in 12-bit mode, so I don't expect any
complaint.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NGuenter Roeck <linux@roeck-us.net>
      0cd2c72d
    • J
      hwmon: (lm75) Prepare to support per-chip resolution and sample time · 87d0621a
      由 Jean Delvare 提交于 
      Prepare the lm75 driver to support per-chip resolution and sample
time. For now we only make the code generic enough to support it, but
we still use the same, unchanged resolution (9-bit) and sample time
(1.5 s) for all chips.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NGuenter Roeck <linux@roeck-us.net>
      87d0621a
    • J
      hwmon: (lm75) Per-chip configuration register initialization · 8a5c5cc6
      由 Jean Delvare 提交于 
      There is no standard for the configuration register bits of LM75-like
chips. We shouldn't blindly clear bits setting the resolution as they
are either unused or used for something else on some of the supported
chips.

So, switch to per-chip configuration initialization. This will allow
for better tuning later, for example using more resolution bits when
available.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NGuenter Roeck <linux@roeck-us.net>
      8a5c5cc6
    • T
      cxgb4: fix error recovery when t4_fw_hello returns a positive value · 777c2300
      由 Thadeu Lima de Souza Cascardo 提交于 
      Since commit 636f9d37 ("cxgb4: Add
support for T4 configuration file"), t4_fw_hello may return a positive
value instead of 0 for success. The recovery code tests only for zero
and fails recovery for any other value.

This fix tests for negative error values and fails only on those cases.
Error recovery after an error injection works after this change.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      777c2300
    • K
      sky2: Fix crash on receiving VLAN frames · 88dccf5b
      由 Kirill Smelkov 提交于 
      After recent 86a9bad3 (net: vlan: add protocol argument to packet
tagging functions) my sky2 started to crash on receive of tagged
frames, with backtrace similar to

    #CRASH!!!
    vlan_do_receive
    __netif_receive_skb_core
    __netif_receive_skb
    netif_receive_skb
    sky2_poll
    ...
    __net_rx_action
    __do_softirq

The problem turned out to be:

    1) sky2 copies small packets from ring on RX, and in its
       receive_copy() skb header is copied manually field, by field, and
       only for some fields;

    2) 86a9bad3  added skb->vlan_proto, which vlan_untag() or
       __vlan_hwaccel_put_tag() set, and which is later used in
       vlan_do_receive().

       That patch updated copy_skb_header() for newly introduced
       skb->vlan_proto, but overlooked the need to also copy it in sky2's
       receive_copy().

Because of 2, we have the following scenario:

    - frame is received and tagged in a ring, by sky2_rx_tag(). Both
      skb->vlan_proto and skb->vlan_tci are set;

    - later skb is decided to be copied, but skb->vlan_proto is
      forgotten and becomes 0.

    - in the beginning of vlan_do_receive() we call

        __be16 vlan_proto = skb->vlan_proto;
        vlan_dev = vlan_find_dev(skb->dev, vlan_proto, vlan_id);

      which eventually invokes

        vlan_proto_idx(vlan_proto)

      and that routine BUGs for everything except ETH_P_8021Q and
      ETH_P_8021AD.

      Oops.

Fix it.

P.S.

Stephen, I wonder, why copy_skb_header() is not used in
sky2.c::receive_copy() ? Problems, where receive_copy was updated field
by field showed several times already, e.g.

    3f42941b    (sky2: propogate rx hash when packet is copied)
    e072b3fa    (sky2: fix receive length error in mixed non-VLAN/VLAN traffic)

Cc: Patrick McHardy <kaber@trash.net>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Mirko Lindner <mlindner@marvell.com>
Signed-off-by: NKirill Smelkov <kirr@mns.spb.ru>
Acked-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      88dccf5b