The Samsung S3C24xx uses new architecture file layout in the post 2.6.23
kernel.  This patch fixes include path for the s3c2443-ac97.c.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Volume knob controls with STAC codecs seem to cause problems with some
devices.  Volumes change very slowly or silent suddenly.  It's likely
due to conflict between the software and the hardware volume knob
setup.
Since we'll have a virtual master control in future, it's safer to
remove this control completely right now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Check the value ranges in ctl put callbacks properly.
Some callbacks may access a wrong pointer depending on the value passed.
Also, fixed the access to the wrong field for enum values, and fixed
some callbacks to return the proper error code.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The recent addition of checking PINCAP for EAPD seems to break some
systems due to unexpected response from the codec chip.  We shouldn't
issue GET_PINCAP verb to non-PIN widgets.  Now checks the widget type
before checking EAPD bit.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

When the output and input ports are used at the same time, the timer can
be interrupted by the hardware interrupt, so we have to disable
interrupts when we take a lock in the timer.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Fix the definitions of the CM_FLINKON/CM_FLINKOFF register bits that
were garbled in the last 'update register definitions' patch.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

AD1986A has a hardware problem that it cannot share a stream with
multiple pins properly.  The problem occurs e.g. when a volume is changed
during playback.
So far, hda-intel driver unconditionally assigns the stream to multiple
output pins in copy-front mode, and this should be avoided for AD1986A
codec.
The original fix patch was by zhejiang <zhe.jiang@intel.com>.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

None of the drivers with a struct pardevice's ->irq_func() hook ever
used the 'irq' argument passed to it, so remove it.
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

dac_nids arrays in each codec support code may have up to 5 items
when assigned from the auto-configurator.  Some codec codes have
less numbers than the possible max.  This patch defines the constant
and fixes the array definitions.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The lock grabbed in snd_ctl_empty_read_queue() is hardirq-unsafe but we hold
an hardirq-safe one already, so make the &ctl->read_lock also hard-irq-safe.
Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The patch adds the USB microphone quirk for Logitech Communicator
(046d:08f5 Logitech, Inc.) webcam.
Signed-off-by: NDawid Wrobel <dawid@klej.net>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Fixed the build error from patch_sigmatel.c when built without
CONFIG_SND_HDA_GENERIC by defining a dummy function to return error.
Also, clean up hda_codec.c by removing unneeded ifdefs (the compiler
will optimize out).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Fixed the init verbs and added the missing volume controls so that
the driver works again with Conexant 5045 codec chip.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The addition of volume knob as Master volume resulted in conflict with
the existing one by stac92xx_auto_create_hp_ctls().
This patch fixes the conflict, and still keeps the Master control for
codecs without volume knob as much as possible.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

If the load_all option was turned on all cards would be treated as unknown,
even those which are in the database.  Of course, if the card is in the
database there is no reason to use the load_all option.  It's there to force
loading when the card isn't in the database.  But there are out of date wikis
that say to do this and some distros might turn this option on by default.
So, we keep the load_all option from turning known cards into unknown cards.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The G2 bus on the SEGA Dreamcast connects both the maple peripheral
bus and the AICA sound memory. DMA requests on one can cause the other
to timeout on memory operations.
This patch prevents maple interrupts from causing hiccoughs in the
AICA sound (maple bus code will land in 2.6.24).
There are other cleanups for this (AICA) code - but this is in effect
a regression fix rather than a cleanup.
Signed-off-by: NAdrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

const and __devinit aren't a good pair, resulting in a section
mismatch error.  Let's remove const as a temporary solution.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The jack detection bit on AD1986A Lenovo N100 seems inverse from
the standard definition.  Now fixed the detection properly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

function after Trent Piepho's patch for AD1848.
It also makes busy_wait() function call not atomic.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

struct video_device used to define a .hardware field. While
initialized on severl drivers, this field is never used inside V4L.
However, drivers using it need to include the old V4L1 header.

This seems to cause compilation troubles with some random configs.
Better just to remove it from all drivers.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Fix the various misspellings of "system", controller", "interrupt" and
"[un]necessary".
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>

get rid of input BIT* duplicate defines

use newly global defined macros for input layer. Also remove includes of
input.h from non-input sources only for BIT macro definiton. Define the
macro temporarily in local manner, all those local definitons will be
removed further in this patchset (to not break bisecting).
BIT macro will be globally defined (1<<x)
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Cc: <dtor@mail.ru>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Cc: <lenb@kernel.org>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Cc: <perex@suse.cz>
Acked-by: NMauro Carvalho Chehab <mchehab@infradead.org>
Cc: <vernux@us.ibm.com>
Cc: <malattia@linux.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Found these while looking at printk uses.

Add missing newlines to dev_<level> uses
Add missing KERN_<level> prefixes to multiline dev_<level>s
Fixed a wierd->weird spelling typo
Added a newline to a printk
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: James Smart <James.Smart@Emulex.Com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch contains the next round of scheduled OSS code removal.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The last patches to replace with schedule_timeout() don't work as expected.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch sync sparc driver with x86 isa cs4231 driver patches.
It fixes wrong waiting for the auto calibration bit and makes
further waiting use much finer granularity.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch replaces cs4231 registers definitions with
common include.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

the BTC 1817DW board.
The QS1000 is connected through the digital input
to the Opti931 chip.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

open and close operations are called only from pcm layer
and mutexed there with pcm->open_mutex.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

when simulating a storm of fake GUS interrupts (without actually owning
this venerable piece of ISA hardware) the driver falls over (crashes) in
two ways:
1) spinlocks being initialized too late:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
 [<401058ca>] show_trace_log_lvl+0x1a/0x30
 [<401064b2>] show_trace+0x12/0x20
 [<401064d6>] dump_stack+0x16/0x20
 [<4014a72b>] __lock_acquire+0xcfb/0x1030
 [<4014aac0>] lock_acquire+0x60/0x80
 [<40721a68>] _spin_lock_irqsave+0x38/0x50
 [<4058fc12>] snd_gf1_i_look8+0x22/0x60
 [<405906fe>] snd_gus_interrupt+0x13e/0x270
 [<401548e8>] handle_IRQ_event+0x28/0x60
 [<40155cc1>] handle_fasteoi_irq+0x71/0xe0
 [<40107238>] do_IRQ+0x48/0xa0
 [<401051fe>] common_interrupt+0x2e/0x40
 [<40156822>] register_handler_proc+0x92/0xf0
 [<401550c2>] setup_irq+0xe2/0x190
 [<40155224>] request_irq+0xb4/0xd0
 [<4058f524>] snd_gus_create+0x124/0x3c0
 [<40aa4087>] snd_gusclassic_probe+0x2a7/0x4b0
 [<403f5eff>] isa_bus_probe+0x1f/0x30
 [<403f1944>] driver_probe_device+0x84/0x190
 [<403f1a58>] __device_attach+0x8/0x10
 [<403f0e63>] bus_for_each_drv+0x53/0x80
 [<403f1b1b>] device_attach+0x8b/0x90
 [<403f0dd8>] bus_attach_device+0x48/0x80
 [<403efdbd>] device_add+0x45d/0x5a0
 [<403eff12>] device_register+0x12/0x20
 [<403f60c3>] isa_register_driver+0xb3/0x140
 [<40aa3dd2>] alsa_card_gusclassic_init+0x12/0x20
 [<40a665c3>] kernel_init+0x133/0x310
 [<401054a7>] kernel_thread_helper+0x7/0x10
 =======================
2) callback functions not being filled in yet:
BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000
 printing eip:
00000000
*pde = 00000000
Oops: 0000 [#1]
SMP DEBUG_PAGEALLOC
CPU:    0
EIP:    0060:[<00000000>]    Not tainted VLI
EFLAGS: 00010002   (2.6.23 #37)
EIP is at 0x0
eax: 7fe94000   ebx: 7fe94000   ecx: 00000000   edx: 00000226
esi: 00000000   edi: 00000005   ebp: 7ff87c28   esp: 7ff87bf4
ds: 007b   es: 007b   fs: 00d8  gs: 0000  ss: 0068
Process swapper (pid: 1, ti=7ff86000 task=7ff84000 task.ti=7ff86000)
Stack: 40590683 408424a9 408db87c 00000029 40787406 00000064 00000046 ff000000
       000000ff 00000001 7faefaf0 00000000 00000005 7ff87c40 401548e8 00000000
       40a52000 7faefaf0 00000005 7ff87c58 40155cc1 40a52030 00000005 00000000
Call Trace:
 [<401058ca>] show_trace_log_lvl+0x1a/0x30
 [<4010598b>] show_stack_log_lvl+0xab/0xd0
 [<40105b7c>] show_registers+0x1cc/0x2d0
 [<40105d96>] die+0x116/0x240
 [<4011d7bb>] do_page_fault+0x18b/0x670
 [<40721d22>] error_code+0x72/0x80
 [<401548e8>] handle_IRQ_event+0x28/0x60
 [<40155cc1>] handle_fasteoi_irq+0x71/0xe0
 [<40107238>] do_IRQ+0x48/0xa0
 [<401051fe>] common_interrupt+0x2e/0x40
 [<401a344e>] proc_create+0x3e/0x120
 [<401a3733>] proc_mkdir_mode+0x23/0x50
 [<401a376f>] proc_mkdir+0xf/0x20
 [<40156864>] register_handler_proc+0xd4/0xf0
 [<401550c2>] setup_irq+0xe2/0x190
 [<40155224>] request_irq+0xb4/0xd0
 [<4058f524>] snd_gus_create+0x124/0x3c0
 [<40aa4087>] snd_gusclassic_probe+0x2a7/0x4b0
 [<403f5eff>] isa_bus_probe+0x1f/0x30
 [<403f1944>] driver_probe_device+0x84/0x190
 [<403f1a58>] __device_attach+0x8/0x10
 [<403f0e63>] bus_for_each_drv+0x53/0x80
 [<403f1b1b>] device_attach+0x8b/0x90
 [<403f0dd8>] bus_attach_device+0x48/0x80
 [<403efdbd>] device_add+0x45d/0x5a0
 [<403eff12>] device_register+0x12/0x20
 [<403f60c3>] isa_register_driver+0xb3/0x140
 [<40aa3dd2>] alsa_card_gusclassic_init+0x12/0x20
 [<40a665c3>] kernel_init+0x133/0x310
 [<401054a7>] kernel_thread_helper+0x7/0x10
 =======================
Code:  Bad EIP value.
EIP: [<00000000>] 0x0 SS:ESP 0068:7ff87bf4
Kernel panic - not syncing: Fatal exception in interrupt
with these things fixed, i get the expected 'no such hardware' result
from the driver initialization:
 Calling initcall 0x40aa3dc0: alsa_card_gusclassic_init+0x0/0x20()
 ALSA sound/isa/gus/gusclassic.c:136: [0x220] check 1 failed - 0xff
 initcall 0x40aa3dc0: alsa_card_gusclassic_init+0x0/0x20() returned 0.
 initcall 0x40aa3dc0 ran for 133 msecs:
 alsa_card_gusclassic_init+0x0/0x20()
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Fixed SKU ID function for realtek codecs.  It's used by the automatic
BIOS configuration mode.  Now it supports the correct jack-detection
mechanism, too.
Signed-off-by: NKailang Yang <kailang@realtek.com.tw>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Signed-off-by: NKailang Yang <kailang@realtek.com.tw>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Reported by Jan-Marek Glogowski.
The dmic array is passed to snd_hda_parse_pin_def_config() and
should be zero-terminated.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Fix zero-division bug in the calculation dds offset.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Remove superfluous comment line (maybe a merge failure).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Reported by zhejiang <zhe.jiang@intel.com>
'I found that STAC_VOLKNOB hardwired the KNOB nid to 0x24.
It is okay for stac9205 and stac927x.
But the VolumeKnob nid of stac9220-9221 is 0x16.'
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Fixed ALC262 fujitsu model to support Fujitsu Lifebook C1410 properly.
It requires EAPD and has separate int/ext mic inputs (which was missing
in the current driver).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Since the last patch made the ENTER_UART command optional, the
enter_uart option and its corresponding flag have become superfluous.
The uart_enter option remains for backward compatibility but just prints
a warning when used.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>