- 01 8月, 2014 1 次提交
-
-
由 Mark Brown 提交于
The CODEC doesn't care how data is laid out in memory. Signed-off-by: NMark Brown <broonie@linaro.org> Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
-
- 29 5月, 2014 1 次提交
-
-
由 Daniel Matuschek 提交于
WM8804 can run with PLL frequencies of 256xfs and 128xfs for most sample rates. At 192kHz only 128xfs is supported. The existing driver selects 128xfs automatically for some lower samples rates. By using an additional mclk_div divider, it is now possible to control the behaviour. This allows using 256xfs PLL frequency on all sample rates up to 96kHz. It should allow lower jitter and better signal quality. The behavior has to be controlled by the sound card driver, because some sample frequency share the same setting. e.g. 192kHz and 96kHz use 24.576MHz master clock. The only difference is the MCLK divider. Signed-off-by: NDaniel Matuschek <daniel@matuschek.net> Tested-by: NFlorian Meier <florian.meier@koalo.de> Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 25 4月, 2014 1 次提交
-
-
由 Fabio Estevam 提交于
Using devm_regulator_bulk_get() can make the code cleaner and smaller as we do not need to call regulator_bulk_free() in the error and remove paths. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 15 4月, 2014 1 次提交
-
-
由 Lars-Peter Clausen 提交于
For CODEC controls snd_kcontrol_chip() currently returns a pointer to the CODEC that registered the control. With the upcoming consolidation of platform and CODEC controls this will change. Prepare for this by introducing the snd_soc_kcontrol_codec() helper function that will hide the implementation details of how the CODEC for a control can be obtained. This will allow us to change this easily in the future. The patch also updates all CODEC drivers to use the new helper function. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 11 3月, 2014 1 次提交
-
-
由 Xiubo Li 提交于
For some CODEC drivers like who act as the MFDs children are ignored by this patch. Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 20 2月, 2014 1 次提交
-
-
由 Takashi Iwai 提交于
As SOC_ENUM_SINGLE_DECL() itself contains const modifier now, we can reduce const from its users. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Acked-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 28 11月, 2013 1 次提交
-
-
由 Fabio Estevam 提交于
Using the IS_ENABLED() macro can make the code shorter and simpler. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 24 12月, 2012 1 次提交
-
-
由 Fabio Estevam 提交于
The condition "if (!freq_in || !freq_out)" has already been tested previously, so no need to do it again. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 09 12月, 2012 1 次提交
-
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 23 11月, 2012 1 次提交
-
-
由 Tushar Behera 提交于
Signed-off-by: NTushar Behera <tushar.behera@linaro.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 03 6月, 2012 1 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 06 3月, 2012 1 次提交
-
-
由 Axel Lin 提交于
commit 891271c2 "ASoC: Convert wm8804 to direct regmap API usage" only converts wm8804_spi_probe to use regmap_init_spi. This patch adds missing regmap_init_i2c in wm8804_i2c_probe. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 27 1月, 2012 1 次提交
-
-
由 Axel Lin 提交于
Since commit 33c5f969 "ASoC: Allow idle_bias_off to be specified in CODEC drivers", now we can set idle_bias_off flag in struct snd_soc_codec_driver for devices can unconditionally support idle_bias_off. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 20 1月, 2012 3 次提交
-
-
由 Mark Brown 提交于
The register map for this device is actually fairly sparse so the rbtree should be beneficial. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 09 12月, 2011 1 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 02 12月, 2011 1 次提交
-
-
由 Lars-Peter Clausen 提交于
The existence of this parameter is purely historical. None of the CODEC drivers uses it and we always pass in the same value anyway, so it should be safe to remove it. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 23 11月, 2011 1 次提交
-
-
由 Lars-Peter Clausen 提交于
Commit 1ee46ebd("ASoC: Make the DAI ops constant in the DAI structure") introduced the possibility to have constant DAI ops structures, yet this is barley used in both existing drivers and also new drivers being submitted, although none of them modifies its DAI ops structure. The later is not surprising since existing drivers are often used as templates for new drivers. So this patch just constifies all existing snd_soc_dai_ops structs to eliminate the issue altogether. The patch was generated with the following coccinelle semantic patch: // <smpl> @@ identifier ops; @@ -struct snd_soc_dai_ops ops = +const struct snd_soc_dai_ops ops = { ... }; // </smpl> Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 31 8月, 2011 1 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 09 6月, 2011 1 次提交
-
-
由 Mark Brown 提交于
Reported-by: NKieran O'Leary <Kieran.O'Leary@wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com> Cc: stable@kernel.org
-
- 13 1月, 2011 1 次提交
-
-
由 Dimitris Papastamos 提交于
Signed-off-by: NDimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 22 11月, 2010 1 次提交
-
-
由 Jarkko Nikula 提交于
There is no need to include soc-dapm.h since soc.h includes it. Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 06 11月, 2010 1 次提交
-
-
由 Liam Girdwood 提交于
Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 11 10月, 2010 1 次提交
-
-
由 Dan Carpenter 提交于
There is a typo here that got copy and pasted to several probe functions. kzalloc() returns NULL on allocation failures and not an ERR_PTR. Signed-off-by: NDan Carpenter <error27@gmail.com> Acked-by: NDimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 06 10月, 2010 1 次提交
-
-
由 Dimitris Papastamos 提交于
Be verbose and print out the device revision. Signed-off-by: NDimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 04 10月, 2010 2 次提交
-
-
由 Dimitris Papastamos 提交于
The PLL is disabled when the corresponding bit is set not the other way around. This commit depends on my other commit with Subject "ASoC: WM8804: Refactor set_pll code to avoid GCC warnings". Signed-off-by: NDimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Dimitris Papastamos 提交于
Ensure that no uninitialised variable warnings are generated by GCC. Signed-off-by: NDimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 03 10月, 2010 1 次提交
-
-
由 Dimitris Papastamos 提交于
Make sure the DAI name does not include a '/' since we might have per DAI debugfs or sysfs entries in the future. Signed-off-by: NDimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 01 10月, 2010 1 次提交
-
-
由 Dimitris Papastamos 提交于
The WM8804 is a high performance consumer mode S/PDIF transceiver with support for 1 received channel and 1 transmitted channel. Signed-off-by: NDimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-