- 17 10月, 2006 3 次提交
-
-
由 Larry Finger 提交于
Linus's tree now has a configuration option that prints a warning whenever the returned value of any routine is ignored. This patch fixes the only such warning for bcm43xx. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes some race conditions in the WirelessExtension handling and association handling code. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
There is a potential race condition in the periodic_work_handler routine of bcm43xx-softmac. In addition to fixing this condition, the size of code is reduced by moving the mutex lock outside the if. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 05 10月, 2006 1 次提交
-
-
由 David Howells 提交于
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: NDavid Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
-
- 27 9月, 2006 1 次提交
-
-
由 Theodore Ts'o 提交于
The following patches reduce the size of the VFS inode structure by 28 bytes on a UP x86. (It would be more on an x86_64 system). This is a 10% reduction in the inode size on a UP kernel that is configured in a production mode (i.e., with no spinlock or other debugging functions enabled; if you want to save memory taken up by in-core inodes, the first thing you should do is disable the debugging options; they are responsible for a huge amount of bloat in the VFS inode structure). This patch: The filesystem or device-specific pointer in the inode is inside a union, which is pretty pointless given that all 30+ users of this field have been using the void pointer. Get rid of the union and rename it to i_private, with a comment to explain who is allowed to use the void pointer. This is just a cleanup, but it allows us to reuse the union 'u' for something something where the union will actually be used. [judith@osdl.org: powerpc build fix] Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NJudith Lebzelter <judith@osdl.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 26 9月, 2006 5 次提交
-
-
由 Larry Finger 提交于
The setup for running long periodic work has a bug that leads to netdev watchdog tx timeouts. This change eliminates the timeouts. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Acked-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
An error message is changed to a printk as the original dprintk would be optimized away if debugging were not enabled. If the error is triggered, a more meaningful message is returned. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
In bcm43xx-softmac, the bcm43xx_stats struct contains a variable that is no longer used. In addition, two TODO entries related to noise processing in bcm43xx_rx have been completed, and as unused one is removed. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
This patch updates the PHY initialization code for bcm43xx-softmac to conform with recent changes in the clean-room specs at http://bcm-specs.sipsolutions.net. Mostly, these changes implement the sequence needed for chips with GPHY revision 8; however, the patch also corrects a typo in one address, and some parts that were missing from the spec when the initial coding was done. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
Patch to make bcm43xx-softmac be compatible with the revised SSID length of WE-21. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 14 9月, 2006 1 次提交
-
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 12 9月, 2006 6 次提交
-
-
由 Larry Finger 提交于
Coverity CID 1160 & 1161 Remove some dead code from bcm43xx_sysfs.c in 2.6.18-rc6 Signed-off-by: NDarren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
This patch prints out the ucode debug status to sysfs. So, users can watch the microcode status of their hardware. Signed-off-by: NMartin Langer <martin-langer@gmx.de> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
This patch prints microcode revision, patchlevel, date and time to KERN_INFO. Also, version 4.xx microcodes (rev>0x128) will be rejected by the driver, because they still do not work. Signed-off-by: NMartin Langer <martin-langer@gmx.de> Acked-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
This patch removes code that was make obsolete when the wireless statistics in bcm43xx-softmac were changed, but was overlooked at that time. The value of bcm->stats.link_quality computed here is never used. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
This patch fixes an out of sequence step in the bcm43xx_init_board routine for bcm43xx-softmac. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
This fixes various bugs in the init and shutdown code that would lead to lockups and crashes. Signed-Off-By: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 30 8月, 2006 6 次提交
-
-
由 Larry Finger 提交于
This patch sets the floor of wireless level (signal) and noise at -110 dBm, which makes them be comatible with RCPI, as discussed by Simon Barber. With this change, bcm43xx-softmac and bcm43xx-d80211 behave the same. Signed-Off-By: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
When bcm43xx-softmac is given an ifdown/ifup sequence, the value for bcm->mac_suspended ends up wrong, which leads to a large number of assert(bcm->mac_suspended>=0) messages. This one-line patch fixes this problem. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-Off-By: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
hard_start_xmit should return a NETIF_TX_FOO error code. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-Off-By: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
Convert the bitfields in the bcm43xx DMA code to properly aligned u8 booleans. These flags are accessed in the DMA hotpath, so it's a good idea to waste a few bytes of memory for the sake of speed by not requiring masking (and probably shifting) of the bitfields. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-Off-By: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
Calls to bcm43xx_rng_init() and bcm43xx_rng_exit() got lost due to merge trouble. Re-add them. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This is a rewrite of the bcm43xx DMA engine. It adds support for >1G of memory (for chips that support the extension bits) and 64-bit DMA (for chips that support it). Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 01 8月, 2006 2 次提交
-
-
由 John W. Linville 提交于
Drop the mac_suspend loop count to reduce the maximum delay to 10ms. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
Fix-up missing mac_suspended initialization which resulted from Linville's sloppy patch mangling. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 28 7月, 2006 7 次提交
-
-
由 John W. Linville 提交于
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
This minor patch for wireless-2.6 (softmac) adjusts the parameters of the wireless statistics to improve the display of programs such as the "Wireless Network Information" applet of KDE. Thanks to Dan Williams and Jean Tourrilhes for valuable help in setting up the return of info in dBm. Signed-Off-By: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
Rewrite of the bcm43xx initialization routines. This fixes several issues: * up-down-up-down-up... stale data issue (May fix some DHCP issues) * Fix the init vs IRQ handler race (and remove the workaround) * Fix init for cards with multiple cores (APHY) As softmac has no internal PHY handling (unlike dscape), this adds the file "phymode" to sysfs. The active PHY can be selected by writing either a, b or g to this file. Current PHY can be determined by reading from it. * Fix the controller restart code. Controller restart can now also be triggered through echo 1 > /debug/bcm43xx/ethX/restart Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes mac_suspend reference counting for ifconfig up ifconfig down ifconfig up Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
Microoptimization: This reduces the udelay in bcm43xx_mac_suspend. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
Suspend MAC (and make MAC-suspend refcounting) when doing long periodic work. On long periodic work, we disable IRQs on the device, so we don't want the MAC to stay operating and probably miss packets due do non-delivery of interrupts. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Daniel Drake 提交于
Johann Uhrmann reported a bcm43xx crash and Michael Buesch tracked it down to a problem with the new shared key auth code (recursive calls into the driver) This patch (effectively Michael's patch with a couple of small modifications) solves the problem by sending the authentication challenge response frame from a workqueue entry. I also removed a lone \n from the bcm43xx messages relating to authentication mode - this small change was previously discussed but not patched in. Signed-off-by: NDaniel Drake <dsd@gentoo.org> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 11 7月, 2006 4 次提交
-
-
由 Larry Finger 提交于
This patch improves the statistics returned from bcm43xx_get_wireless_stats. The signal level comes from smoothing the "rssi" value returned by the firmware after it is converted into a dBm value by the driver. The quality value is a hack derived from the smoothed level and an assumed RX_POWER_MAX of -10 dBM. The noise value is still the one calculated from the clean-room formula. On my system, this is roughly -65 dBm, which seems too high. The revised version uses the ieee80211 spinlock to protect traversing of the network list. Signed-Off-By: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This patch adds voluntary preemption points into the PHY calibration loops to allow non-CONFIG_PREEMPT machines to not suffer from huge delays. CONFIG_PREEMPT machines are already fine, because all this code is run in non-atomic process context. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
As many people don't seem to like the locking "obfuscation" in the bcm43xx driver, this patch removes it. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
An assert statement near the start of handle_irq_noise in the softmac version of bcm43xx_main.c is there to protect against out of bound addressing using variable bcm->noisecalc.nr_samples. The arrays in question have a dimension of 8, thus the value must be < 8. Signed-Off-By: NLarry.Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 06 7月, 2006 4 次提交
-
-
由 Daniel Drake 提交于
I recently patched softmac to enable shared key authentication. This small patch will enable crazy or unfortunate bcm43xx users to use this new capability. Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
The current version of bcm43xx-softmac uses local routines to check if a channel is valid. As noted in the comments, these routines do not take any regulatory information into account. This patch converts the code to use the equivalent routine in ieee80211, which is being converted to know about regulatory information. Signed-Off-By: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
Place the Init-vs-IRQ workaround before any card register access, because we might not have the wireless core mapped at all times in init. So this will result in a Machine Check caused by a bus error. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Daniel Drake 提交于
Use Softmac-suggested TX ratecode: ieee80211softmac_suggest_txrate() Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-