Finishing a socket connect is the same for IPv4 and IPv6, so split it out
into a helper.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clone xs_bindresvport into two functions, one that can handle IPv4
addresses, and one that can handle IPv6 addresses.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Prepare for introduction of IPv6-specific socket bind function.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We could clone xs_set_port, but this is easier overall.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Prepare for adding IPv6 support to the RPC client by adding IPv6
capabilities to rpcbind.  Note that this is support on the query side
only; registering IPv6 addresses with the local portmapper will come
later.

Note we have to take care not to fall back to using version 2 of the
rpcbind protocol if we're dealing with IPv6 address.  Version 2 doesn't
support IPv6 at all.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clone xs_format_ipv4_peer_addresses into an IPv6 version.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Prepare to add an IPv6 version of xs_format_peer_addresses by renaming it
to xs_format_ipv4_peer_addresses.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Add support for the NFS client's need to export volume information
with IP addresses formatted in hex instead of decimal.

This isn't used yet, but subsequent patches (not in this series) will
change the NFS client to use this functionality.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Use more generic logic to free buffers holding formatted addresses.  This
makes it less likely a bug will be introduced when adding additional buffer
types in xs_format_peer_address().
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

include/linux/kernel.h gives us some nice macros for formatting IP
addresses.  Use them.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

A minor thing, but useful when working with a server with multiple
addrs. This looks like it might also be necessary if Miklos' effort
to eliminate /etc/mtab ever comes to fruition.

When displaying mount options in /proc/mounts, the kernel prints
"addr=hostname". This info is redundant since we already have the
hostname displayed as part of the "device" section of the mount. This
patch changes it to display the IP address to which the socket is
connected.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

no need to set up foo-objs these days.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

I would like to discuss the idea that the current checks for attribute
timeout using time_after are inadequate for 32bit architectures, since
time_after works correctly only when the two timestamps being compared
are within 2^31 jiffies of each other. The signed overflow caused by
comparing values more than 2^31 jiffies apart will flip the result,
causing incorrect assumptions of validity.

2^31 jiffies is a fairly large period of time (~25 days) when compared
to the lifetime of most kernel data structures, but for long lived NFS
mounts that can sit idle for months (think that for some reason autofs
cannot be used), it is easy to compare inode attribute timestamps with
very disparate or even bogus values (as in when jiffies have wrapped
many times, where the comparison doesn't even make sense).

Currently the code tests for attribute timeout by simply adding the
desired amount of jiffies to the stored timestamp and comparing that
with the current timestamp of obtained attribute data with time_after.
This is incorrect, as it returns true for the desired timeout period
and another full 2^31 range of jiffies.

In testing with artificial jumps (several small jumps, not one big
crank) of the jiffies I was able to reproduce a problem found in a
server with very long lived NFS mounts, where attributes would not be
refreshed even after touching files and directories in the server:

Initial uptime:
03:42:01 up 6 min, 0 users, load average: 0.01, 0.12, 0.07

NFS volume is mounted and time is advanced:
03:38:09 up 25 days, 2 min, 0 users, load average: 1.22, 1.05, 1.08

# ls -l /local/A/foo/bar /nfs/A/foo/bar
-rw-r--r--  1 root root 0 Dec 17 03:38 /local/A/foo/bar
-rw-r--r--  1 root root 0 Nov 22 00:36 /nfs/A/foo/bar

# touch /local/A/foo/bar

# ls -l /local/A/foo/bar /nfs/A/foo/bar
-rw-r--r--  1 root root 0 Dec 17 03:47 /local/A/foo/bar
-rw-r--r--  1 root root 0 Nov 22 00:36 /nfs/A/foo/bar

We can see the local mtime is updated, but the NFS mount still shows
the old value. The patch below makes it work:

Initial setup...
07:11:02 up 25 days, 1 min,  0 users,  load average: 0.15, 0.03, 0.04

# ls -l /local/A/foo/bar /nfs/A/foo/bar
-rw-r--r--  1 root root 0 Jan 11 07:11 /local/A/foo/bar
-rw-r--r--  1 root root 0 Jan 11 07:11 /nfs/A/foo/bar

# touch /local/A/foo/bar

# ls -l /local/A/foo/bar /nfs/A/foo/bar
-rw-r--r--  1 root root 0 Jan 11 07:14 /local/A/foo/bar
-rw-r--r--  1 root root 0 Jan 11 07:14 /nfs/A/foo/bar
Signed-off-by: NFabio Olive Leite <fleite@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Hi.

Attached is a patch to modify the NFS client code to support
64 bit ino's, as appropriate for the system and the NFS
protocol version.

The code basically just expand the NFS interfaces for routines
which handle ino's from using ino_t to u64 and then uses the
fileid in the nfs_inode instead of i_ino in the inode.  The
code paths that were updated are in the getattr method and
the readdir methods.

This should be no real change on 64 bit platforms.  Since
the ino_t is an unsigned long, it would already be 64 bits
wide.

    Thanx...

           ps
Signed-off-by: NPeter Staubach <staubach@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This will allow rpc.gssd to use inotify instead of dnotify in order to
locate new rpc upcall pipes.

This also requires the exporting of __audit_inode_child(), which is used by
fsnotify_create() and fsnotify_mkdir(). Ccing David Woodhouse.

Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This helps prevent huge queues of background writes from building up
whenever the server runs out of disk or quota space, or if someone changes
the file access modes behind our backs.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Schedule writes using WB_SYNC_NONE first, then come back for a second pass
using WB_SYNC_ALL.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The only user of nfs_sync_mapping_range() is nfs_getattr(), which uses it
to flush out the entire inode without sending a commit. We therefore
replace nfs_sync_mapping_range with a more appropriate helper.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The only user of this field was NFS.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Just call write_cache_pages directly instead of hacking the writeback
control structure in order to find out if we were called from writepages()
or directly from the VM.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The addition of nfs_page_mkwrite means that We should no longer need to
create requests inside nfs_writepage()
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This is needed in order to set up a proper nfs_page request for mmapped
files.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Au1000: set the PCI controller IO base
  [MIPS] Alchemy: Fix USB initialization.
  [MIPS] IP32: Fix fatal typo in address computation.

The recent fix for a circular lock dependency unfortunately introduced a
potential memory leak in the event where the call to nlmsvc_lookup_host
fails for some reason.

Thanks to Roel Kluin for spotting this.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The recent mv_fill_sg() rewrite, to fix a data corruption problem
related to IOMMU virtual merging, forgot to account for the
potentially-increased size of the scatter/gather table after its run.

Additionally, the DMA boundary is reduced from 0xffffffff to 0xffff
to more closely match the needs of mv_fill_sg().
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The PCI controller IO base was not set in the au1000 pci code.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch fixes a wrong ifdef in the board setup code, leading to the GPIO
pin not being pulled high, and thus the USB switch not being powered at all.

This finishes the rename of CONFIG_USB_OHCI to CONFIG_USB_OHCI_HCD, which
started in 2005 (before 2.6.12-rc2), then probably because things were
working anyway for most people got forgotten.

[Ralf: Paolo's original patch didn't fix the module case, Florian's patch
only fixed MTX1 etc. so this is a combined patch plus some cleanups.]

Cc: Giuseppe Patanè <giuseppe.patane@tvblob.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NGiuseppe Sacco <eppesuig@debian.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

When building a custom keymap, after setting GENERATE_KEYMAP := 1 in
drivers/char/Makefile, the kernel build fails like this:

    CC      drivers/char/vt.o
  make[2]: *** No rule to make target `drivers/char/%.map', needed by `drivers/char/defkeymap.c'.  Stop.
  make[1]: *** [drivers/char] Error 2
  make: *** [drivers] Error 2

This was caused by commit af8b1287, which
deleted a necessary colon from the Makefile rule that generates the keymap,
since that rule contains both a target and a target-pattern.  The following
patch puts the colon back:
Signed-off-by: NMaarten Bressers <mbres@gentoo.org>
Cc: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix against access random data bytes outside the dev->chanmap array.
Thanks to Oliver Neukum for pointing me to this issue.
Signed-off-by: NKarsten Keil <kkeil@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [IPv6]: Fix ICMPv6 redirect handling with target multicast address
  [PKT_SCHED] cls_u32: error code isn't been propogated properly
  [ROSE]: Fix rose.ko oops on unload
  [TCP]: Fix fastpath_cnt_hint when GSO skb is partially ACKed

When IOCB_FLAG_RESFD flag is set and iocb->aio_resfd is incorrect,
statement 'goto out_put_req' is executed. At label 'out_put_req',
aio_put_req(..) is called, which requires 'req->ki_filp' set.

Signed-off-by: Yan Zheng<yanzheng@21cn.com>
Cc: Zach Brown <zach.brown@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

find_lock_page increases page's usage count, we should decrease it
before return VM_FAULT_SIGBUS

Signed-off-by: Yan Zheng<yanzheng@21cn.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The test for VM_CAN_NONLINEAR always fails

Signed-off-by: Yan Zheng<yanzheng@21cn.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All the current page_mkwrite() implementations also set the page dirty. Which
results in the set_page_dirty_balance() call to _not_ call balance, because the
page is already found dirty.

This allows us to dirty a _lot_ of pages without ever hitting
balance_dirty_pages().  Not good (tm).

Force a balance call if ->page_mkwrite() was successful.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When the ICMPv6 Target address is multicast, Linux processes the 
redirect instead of dropping it.  The problem is in this code in 
ndisc_redirect_rcv():

         if (ipv6_addr_equal(dest, target)) {
                 on_link = 1;
         } else if (!(ipv6_addr_type(target) & IPV6_ADDR_LINKLOCAL)) {
                 ND_PRINTK2(KERN_WARNING
                            "ICMPv6 Redirect: target address is not 
link-local.\n");
                 return;
         }

This second check will succeed if the Target address is, for example, 
FF02::1 because it has link-local scope.  Instead, it should be checking 
if it's a unicast link-local address, as stated in RFC 2461/4861 Section 
8.1:

       - The ICMP Target Address is either a link-local address (when
         redirected to a router) or the same as the ICMP Destination
         Address (when redirected to the on-link destination).

I know this doesn't explicitly say unicast link-local address, but it's 
implied.

This bug is preventing Linux kernels from achieving IPv6 Logo Phase II 
certification because of a recent error that was found in the TAHI test 
suite - Neighbor Disovery suite test 206 (v6LC.2.3.6_G) had the 
multicast address in the Destination field instead of Target field, so 
we were passing the test.  This won't be the case anymore.

The patch below fixes this problem, and also fixes ndisc_send_redirect() 
to not send an invalid redirect with a multicast address in the Target 
field.  I re-ran the TAHI Neighbor Discovery section to make sure Linux 
passes all 245 tests now.
Signed-off-by: NBrian Haley <brian.haley@hp.com>
Acked-by: NDavid L Stevens <dlstevens@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>