- 16 5月, 2014 1 次提交
-
-
由 Marek Lindner 提交于
If hard_iface is NULL and goto out is made batadv_hardif_free_ref() doesn't check for NULL before dereferencing it to get to refcount. Introduced in cb1c92ec ("batman-adv: add debugfs support to view multiif tables"). Reported-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Acked-by: NAntonio Quartulli <antonio@meshcoding.com> Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
-
- 15 5月, 2014 4 次提交
-
-
由 Heiko Carstens 提交于
This is the s390 variant of Alexei's JIT bug fix. (patch description below stolen from Alexei's patch) bpf_alloc_binary() adds 128 bytes of room to JITed program image and rounds it up to the nearest page size. If image size is close to page size (like 4000), it is rounded to two pages: round_up(4000 + 4 + 128) == 8192 then 'hole' is computed as 8192 - (4000 + 4) = 4188 If prandom_u32() % hole selects a number >= PAGE_SIZE - sizeof(*header) then kernel will crash during bpf_jit_free(): kernel BUG at arch/x86/mm/pageattr.c:887! Call Trace: [<ffffffff81037285>] change_page_attr_set_clr+0x135/0x460 [<ffffffff81694cc0>] ? _raw_spin_unlock_irq+0x30/0x50 [<ffffffff810378ff>] set_memory_rw+0x2f/0x40 [<ffffffffa01a0d8d>] bpf_jit_free_deferred+0x2d/0x60 [<ffffffff8106bf98>] process_one_work+0x1d8/0x6a0 [<ffffffff8106bf38>] ? process_one_work+0x178/0x6a0 [<ffffffff8106c90c>] worker_thread+0x11c/0x370 since bpf_jit_free() does: unsigned long addr = (unsigned long)fp->bpf_func & PAGE_MASK; struct bpf_binary_header *header = (void *)addr; to compute start address of 'bpf_binary_header' and header->pages will pass junk to: set_memory_rw(addr, header->pages); Fix it by making sure that &header->image[prandom_u32() % hole] and &header are in the same page. Fixes: aa2d2c73 ("s390/bpf,jit: address randomize and write protect jit code") Reported-by: NAlexei Starovoitov <ast@plumgrid.com> Cc: <stable@vger.kernel.org> # v3.11+ Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
When sending data through IUCV a MESSAGE COMPLETE interrupt signals that sent data memory can be freed or reused again. With commit f9c41a62 "af_iucv: fix recvmsg by replacing skb_pull() function" the MESSAGE COMPLETE callback iucv_callback_txdone() identifies the wrong skb as being confirmed, which leads to data corruption. This patch fixes the skb mapping logic in iucv_callback_txdone(). Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kalesh AP 提交于
On some BE3 FW versions, after a HW reset, interrupts will remain disabled for each function. So, explicitly enable the interrupts in the eeh_resume handler, else after an eeh recovery interrupts wouldn't work. Signed-off-by: NKalesh AP <kalesh.purayil@emulex.com> Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Horman 提交于
In my recent fix (76a691d0: fix dma unmap warning), Ben Hutchings noted that my loop count was incorrect. Where j started at startidx, it should have started at zero, and gone on for count entries, not to endidx. Additionally, a DMA resource exhaustion should drop the frame and (for now), return NETDEV_TX_OK, not NETEV_TX_BUSY. This patch fixes both of those issues: Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> CC: Ben Hutchings <ben@decadent.org.uk> CC: "David S. Miller" <davem@davemloft.net> CC: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 5月, 2014 5 次提交
-
-
由 Hannes Frederic Sowa 提交于
tot_len does specify the size of struct ipv6_txoptions. We need opt_flen + opt_nflen to calculate the overall length of additional ipv6 extensions. I found this while auditing the ipv6 output path for a memory corruption reported by Alexey Preobrazhensky while he fuzzed an instrumented AddressSanitizer kernel with trinity. This may or may not be the cause of the original bug. Fixes: 4df98e76 ("ipv6: pmtudisc setting not respected with UFO/CORK") Reported-by: NAlexey Preobrazhensky <preobr@google.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
net_get_random_once depends on the static keys infrastructure to patch up the branch to the slow path during boot. This was realized by abusing the static keys api and defining a new initializer to not enable the call site while still indicating that the branch point should get patched up. This was needed to have the fast path considered likely by gcc. The static key initialization during boot up normally walks through all the registered keys and either patches in ideal nops or enables the jump site but omitted that step on x86 if ideal nops where already placed at static_key branch points. Thus net_get_random_once branches not always became active. This patch switches net_get_random_once to the ordinary static_key api and thus places the kernel fast path in the - by gcc considered - unlikely path. Microbenchmarks on Intel and AMD x86-64 showed that the unlikely path actually beats the likely path in terms of cycle cost and that different nop patterns did not make much difference, thus this switch should not be noticeable. Fixes: a48e4292 ("net: introduce new macro net_get_random_once") Reported-by: NTuomas Räsänen <tuomasjjrasanen@tjjr.fi> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
bpf_alloc_binary() adds 128 bytes of room to JITed program image and rounds it up to the nearest page size. If image size is close to page size (like 4000), it is rounded to two pages: round_up(4000 + 4 + 128) == 8192 then 'hole' is computed as 8192 - (4000 + 4) = 4188 If prandom_u32() % hole selects a number >= PAGE_SIZE - sizeof(*header) then kernel will crash during bpf_jit_free(): kernel BUG at arch/x86/mm/pageattr.c:887! Call Trace: [<ffffffff81037285>] change_page_attr_set_clr+0x135/0x460 [<ffffffff81694cc0>] ? _raw_spin_unlock_irq+0x30/0x50 [<ffffffff810378ff>] set_memory_rw+0x2f/0x40 [<ffffffffa01a0d8d>] bpf_jit_free_deferred+0x2d/0x60 [<ffffffff8106bf98>] process_one_work+0x1d8/0x6a0 [<ffffffff8106bf38>] ? process_one_work+0x178/0x6a0 [<ffffffff8106c90c>] worker_thread+0x11c/0x370 since bpf_jit_free() does: unsigned long addr = (unsigned long)fp->bpf_func & PAGE_MASK; struct bpf_binary_header *header = (void *)addr; to compute start address of 'bpf_binary_header' and header->pages will pass junk to: set_memory_rw(addr, header->pages); Fix it by making sure that &header->image[prandom_u32() % hole] and &header are in the same page Fixes: 314beb9b ("x86: bpf_jit_comp: secure bpf jit against spraying attacks") Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.open-mesh.org/linux-merge由 David S. Miller 提交于
Included changes: - properly release neigh_ifinfo in batadv_iv_ogm_process_per_outif() - properly release orig_ifinfo->router when freeing orig_ifinfo - properly release neigh_node objects during periodic check - properly release neigh_info objects when the related hard_iface is free'd These changes are all very important because they fix some reference counting imbalances that lead to the impossibility of releasing the netdev object used by batman-adv on shutdown. The consequence is that such object cannot be destroyed by the networking stack (the refcounter does not reach zero) thus bringing the system in hanging state during a normal reboot operation or a network reconfiguration.
-
由 Duan Jiong 提交于
Since commit 7e980569("ipv6: router reachability probing"), a router falls into NUD_FAILED will be probed. Now if function rt6_select() selects a router which neighbour state is NUD_FAILED, and at the same time function rt6_probe() changes the neighbour state to NUD_PROBE, then function dst_neigh_output() can directly send packets, but actually the neighbour still is unreachable. If we set nud_state to NUD_INCOMPLETE instead NUD_PROBE, packets will not be sent out until the neihbour is reachable. In addition, because the route should be probes with a single NS, so we must set neigh->probes to neigh_max_probes(), then the neigh timer timeout and function neigh_timer_handler() will not send other NS Messages. Signed-off-by: NDuan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 5月, 2014 3 次提交
-
-
由 Susant Sahani 提交于
The function ip6_tnl_validate assumes that the rtnl attribute IFLA_IPTUN_PROTO always be filled . If this attribute is not filled by the userspace application kernel get crashed with NULL pointer dereference. This patch fixes the potential kernel crash when IFLA_IPTUN_PROTO is missing . Signed-off-by: NSusant Sahani <susant@redhat.com> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
If the sfc driver is in legacy interrupt mode (either explicitly by using interrupt_mode module param or by falling back to it) it will hit a warning at kernel/irq/manage.c because it will try to free an irq which wasn't allocated by it in the first place because the MSI(X) irqs are zero and it'll try to free them unconditionally. So fix it by checking if we're in legacy mode and freeing the appropriate irqs. CC: Zenghui Shi <zshi@redhat.com> CC: Ben Hutchings <ben@decadent.org.uk> CC: <linux-net-drivers@solarflare.com> CC: Shradha Shah <sshah@solarflare.com> CC: David S. Miller <davem@davemloft.net> Fixes: 1899c111 ("sfc: Fix IRQ cleanup in case of a probe failure") Reported-by: NZenghui Shi <zshi@redhat.com> Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Acked-by: NShradha Shah <sshah@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Christensen 提交于
Clearing the IFF_ALLMULTI flag on a down interface could cause an allmulti overflow on the underlying interface. Attempting the set IFF_ALLMULTI on the underlying interface would cause an error and the log message: "allmulti touches root, set allmulti failed." Signed-off-by: NPeter Christensen <pch@ordbogen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 5月, 2014 1 次提交
-
-
由 Randy Dunlap 提交于
Fix kconfig warnings: PTP_1588_CLOCK selects NET_PTP_CLASSIFY, which depends on NET, so PTP_1588_CLOCK should also depend on NET. PTP_1588_CLOCK_PCH selects PTP_1588_CLOCK so the former should depend on NET. warning: (IXP4XX_ETH && PTP_1588_CLOCK) selects NET_PTP_CLASSIFY which has unmet direct dependencies (NET) warning: (SFC && TILE_NET && BFIN_MAC_USE_HWSTAMP && TIGON3 && FEC && E1000E && IGB && IXGBE && I40E && MLX4_EN && SXGBE_ETH && STMMAC_ETH && TI_CPTS && PTP_1588_CLOCK_GIANFAR && PTP_1588_CLOCK_IXP46X && DP83640_PHY && PTP_1588_CLOCK_PCH) selects PTP_1588_CLOCK which has unmet direct dependencies (NET) [This warning is caused by the new 'depends on NET' in PTP_1588_CLOCK.] Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Acked-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 5月, 2014 1 次提交
-
-
由 Simon Wunderlich 提交于
When an interface is removed separately, all neighbors need to be checked if they have a neigh_ifinfo structure for that particular interface. If that is the case, remove that ifinfo so any references to a hard interface can be freed. This is a regression introduced by 89652331 ("batman-adv: split tq information in neigh_node struct") Reported-by: NAntonio Quartulli <antonio@open-mesh.com> Signed-off-by: NSimon Wunderlich <simon@open-mesh.com> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
-
- 10 5月, 2014 14 次提交
-
-
由 Simon Wunderlich 提交于
The current code will not execute batadv_purge_orig_neighbors() when an orig_ifinfo has already been purged. However we need to run it in any case. Fix that. This is a regression introduced by 7351a482 ("batman-adv: split out router from orig_node") Signed-off-by: NSimon Wunderlich <simon@open-mesh.com> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
-
由 Simon Wunderlich 提交于
When an interface is removed from batman-adv, the orig_ifinfo of a orig_node may be removed without releasing the router first. This will prevent the reference for the neighbor pointed at by the orig_ifinfo->router to be released, and this leak may result in reference leaks for the interface used by this neighbor. Fix that. This is a regression introduced by 7351a482 ("batman-adv: split out router from orig_node"). Reported-by: NAntonio Quartulli <antonio@open-mesh.com> Signed-off-by: NSimon Wunderlich <simon@open-mesh.com> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
-
由 Simon Wunderlich 提交于
The neigh_ifinfo object must be freed if it has been used in batadv_iv_ogm_process_per_outif(). This is a regression introduced by 89652331 ("batman-adv: split tq information in neigh_node struct") Reported-by: NAntonio Quartulli <antonio@open-mesh.com> Signed-off-by: NSimon Wunderlich <simon@open-mesh.com> Signed-off-by: NMarek Lindner <mareklindner@neomailbox.ch> Signed-off-by: NAntonio Quartulli <antonio@meshcoding.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless由 David S. Miller 提交于
John W. Linville says: ==================== pull request: wireless 2014-05-08 This one is all from Johannes: "Here are a few small fixes for the current cycle: radiotap TX flags were wrong (fix by Bob), Chun-Yeow fixes an SMPS issue with mesh interfaces, Eliad fixes a locking bug and a cfg80211 state problem and finally Henning sent me a fix for IBSS rate information." Please let me know if there are problems! ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Emil Goode 提交于
In the cas_lock_tx function we acquire multiple locks in a loop and need to use nested lock annotation to prevent lockdep warnings. Reported-by: NMeelis Roos <mroos@linux.ee> Signed-off-by: NEmil Goode <emilgoode@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Commit 91ebb928b "bnx2x: Add support for Multi-Function UNDI" contains a bug which prevent the emptying of the device's Rx buffers before reset. As a result, on new boards it is likely HW will reach some fatal assertion once its interfaces load after UNDI was previously loaded. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NAriel Elior <Ariel.Elior@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Johan Hovold says: ==================== net: cpsw and mdio-gpio fixes for v3.15-final These patches against v3.15-rc4 fix a few issues in the cpsw and mdio-gpio drivers. Resend with proper stable CC (git send-email still fails to parse the Sorry about the noise. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johan Hovold 提交于
Add missing of_node_put to avoid kref leak. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johan Hovold 提交于
Fix null-pointer dereference at probe when the mdio platform device is missing (e.g. when it has been disabled in DT). Cc: stable <stable@vger.kernel.org> # v3.8 Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johan Hovold 提交于
This reverts commit f8d56d8f ("net: eth: cpsw: Correctly attach to GPIO bitbang MDIO driver"). Fix potential null-pointer dereference at probe if the mdio-gpio device has not been successfully probed yet. The offending commit is plain wrong for a number of reasons. First of all it accesses internal driver data of an unrelated device. Neither does it check that the data is non-null (which it is in case the device has not been probed yet). Furthermore, the decision on whether to treat any driver data according to the mdio-gpio driver's internals is made based on the node name. But the name is not compared against "mdio" which is the normal name for the node, but rather against "gpio" which the node does not have to be named (and shouldn't be according to the binding documentation). [ If this hack is to be kept out-of-tree it should at least be matching against the compatible property. ] Cc: Stefan Roese <sr@denx.de> Cc: stable <stable@vger.kernel.org> # v3.14 Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johan Hovold 提交于
Use a sane default bus id (rather than -ENODEV) and print a warning when the bus alias id is missing. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johan Hovold 提交于
Fix aliases syntax in device-tree binding example to avoid copy-paste errors (the alias would be dropped silently). Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bjørn Mork 提交于
This driver maps 802.1q VLANs to MBIM sessions. The mapping is based on a bogus assumption that all tagged frames will use the acceleration API because we enable NETIF_F_HW_VLAN_CTAG_TX. This fails for e.g. frames tagged in userspace using packet sockets. Such frames will erroneously be considered as untagged and silently dropped based on not being IP. Fix by falling back to looking into the ethernet header for a tag if no accelerated tag was found. Fixes: a82c7ce5 ("net: cdc_ncm: map MBIM IPS SessionID to VLAN ID") Cc: Greg Suarez <gsuarez@smithmicro.com> Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following batch contains netfilter fixes for your net tree, they are: 1) Fix use after free in nfnetlink when sending a batch for some unsupported subsystem, from Denys Fedoryshchenko. 2) Skip autoload of the nat module if no binding is specified via ctnetlink, from Florian Westphal. 3) Set local_df after netfilter defragmentation to avoid a bogus ICMP fragmentation needed in the forwarding path, also from Florian. 4) Fix potential user after free in ip6_route_me_harder() when returning the error code to the upper layers, from Sergey Popovich. 5) Skip possible bogus ICMP time exceeded emitted from the router (not valid according to RFC) if conntrack zones are used, from Vasily Averin. 6) Fix fragment handling when nf_defrag_ipv4 is loaded but nf_conntrack is not present, also from Vasily. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 5月, 2014 4 次提交
-
-
由 Darek Marcinkiewicz 提交于
This driver adds support for EtherCAT master module located on CCAT FPGA found on Beckhoff CX series industrial PCs. The driver exposes EtherCAT master as an ethernet interface. EtherCAT is a fieldbus protocol defined on top of ethernet and Beckhoff CX5020 PCs come with built-in EtherCAT master module located on a FPGA, which in turn is connected to a PCI bus. Signed-off-by: NDariusz Marcinkiewicz <reksio@newterm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
Similarly, when CONFIG_SYSCTL is not set, ping_group_range should still work, just that no one can change it. Therefore we should move it out of sysctl_net_ipv4.c. And, it should not share the same seqlock with ip_local_port_range. BTW, rename it to ->ping_group_range instead. Cc: David S. Miller <davem@davemloft.net> Cc: Francois Romieu <romieu@fr.zoreil.com> Reported-by: NStefan de Konink <stefan@konink.de> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
When CONFIG_SYSCTL is not set, ip_local_port_range should still work, just that no one can change it. Therefore we should move it out of sysctl_inet.c. Also, rename it to ->ip_local_ports instead. Cc: David S. Miller <davem@davemloft.net> Cc: Francois Romieu <romieu@fr.zoreil.com> Reported-by: NStefan de Konink <stefan@konink.de> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergey Popovich 提交于
Dst is released one line before we access it again with dst->error. Fixes: 58e35d14 netfilter: ipv6: propagate routing errors from ip6_route_me_harder() Signed-off-by: NSergey Popovich <popovich_sergei@mail.ru> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 08 5月, 2014 7 次提交
-
-
由 John W. Linville 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
由 Daniel Mack 提交于
If CONFIG_OF is not set, make of_mdiobus_register() call mdiobus_register() instead of returning -ENOSYS. This way, we can just call of_mdiobus_register() from all DT-enabled drivers to handle the compat cases. Signed-off-by: NDaniel Mack <zonque@gmail.com> Suggested-by: NFlorian Fainelli <f.fainelli@gmail.com> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Acked-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergey Popovich 提交于
Increment fib_info_cnt in fib_create_info() right after successfuly alllocating fib_info structure, overwise fib_metrics allocation failure leads to fib_info_cnt incorrectly decremented in free_fib_info(), called on error path from fib_create_info(). Signed-off-by: NSergey Popovich <popovich_sergei@mail.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Rajesh Borundia says: ==================== qlcnic: Bug fixes. This patch series contain following bug fixes. * Fix panic where driver was accessing un-initialized crb_intr_mask in non Multi-Tx queue mode while dumping TX queue. * Do not set netdev->real_num_tx_queues directly from driver instead use kernel defined netif_set_real_num_tx_queues() API. Also notify stack about change in number of Rx queues. Please apply this series to net. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Do not set netdev->real_num_tx_queues directly, let netif_set_real_num_tx_queues() take care of it. Do not overwrite netdev->num_tx_queues everytime when driver changes its Tx ring size through ethtool -L and also notify stack to update number of Rx queues. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
o In case of non-multi TX queue mode driver does not initialize "crb_intr_mask" pointer and driver was accessing that un-initialized pointer while dumping TX queue. So dump "crb_intr_mask" only when it is initilaized. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Horman 提交于
The jme driver forgot to check the return status from pci_map_page in its tx path, causing a dma api warning on unmap. Easy fix, just do the check and augment the tx path to tell the stack that the driver is busy so we re-queue the frame. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> CC: Guo-Fu Tseng <cooldavid@cooldavid.org> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-