Add ability to clear statistics.
Signed-off-by: NPaul Fulghum <paulkf@microgate.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Disable burst transfers on adapter local bus.  Hardware feature does not work
on latest version of adapter.
Signed-off-by: NPaul Fulghum <paulkf@microgate.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Serial signals were incorrectly mapped twice to events.
Signed-off-by: NPaul Fulghum <paulkf@microgate.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add internal loopback support for asynchronous mode operation.
Signed-off-by: NPaul Fulghum <paulkf@microgate.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add the ability to clear statistics.
Signed-off-by: NPaul Fulghum <paulkf@microgate.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make some fields of DMA descriptor volatile to prevent compiler optimizations.
Signed-off-by: NPaul Fulghum <paulkf@microgate.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The idea of this patch is to lock both sides of a ptmx/pty pair during line
discipline changing.  This is needed to ensure that say a poll on one side of
the pty doesn't occur while the line discipline is actively being changed.
This resulted in an oops reported on lkml, see:

	http://marc.theaimsgroup.com/?l=linux-kernel&m=111342171410005&w=2

A 'hacky' approach was previously implmemented which served to eliminate the
poll vs.  line discipline changing race.  However, this patch takes a more
general approach to the issue.  The patch only adds locking on a less often
used path, the line-discipline changing path, as opposed to locking the
ptmx/pty pair on read/write/poll paths.

The patch below, takes both ldisc locks in either order b/c the locks are both
taken under the same spinlock().  I thought about locking the ptmx/pty
separately, such as master always first but that introduces a 3 way deadlock.
For example, process 1 does a blocking read on the slave side.  Then, process
2 does an ldisc change on the slave side, which acquires the master ldisc lock
but not the slave's.  Finally, process 3 does a write which blocks on the
process 2's ldisc reference.

This patch does introduce some changes in semantics.  For example, a line
discipline change on side 'a' of a ptmx/pty pair, will now wait for a
read/write to complete on the other side, or side 'b'.  The current behavior
is to simply wait for any read/writes on only side 'a', not both sides 'a' and
'b'.  I think this behavior makes sense, but I wanted to point it out.

I've tested the patch with a bunch of read/write/poll while changing the line
discipline out from underneath.

This patch obviates the need for the above "hide the problem" patch.
Signed-off-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Removed gratuitous includes of asm/serial.h in synklinkmp and ip2main.
Allows to remove the rest of "broken on sparc32" in drivers/char - this
stuff doesn't break the build anymore.  Since it got zero testing, it almost
certainly won't work there, though...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch removes CONFIG_PCI_NAMES.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The IPMI power control function proc_write_chassctrl was badly written, it
directly used userspace pointers, it assumed that strings were NULL
terminated, and it used the evil sscanf function.  This converts over to
using the sysctl interface for this data and changes the semantics to be a
little more logical.
Signed-off-by: NCorey Minyard <minyard@acm.org>
Cc: <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This removes the unused "all_cmd_rcvr" variable from the IPMI driver.
Signed-off-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean up various style issues in the IPMI driver.  Should be no functional
changes.
Signed-off-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch allows Dell servers with IPMI controllers that predate IPMI 1.5
to use the standard poweroff or powercycle commands.  These systems
firmware don't set the chassis capability bit in the Get Device ID, but
they do implement the standard poweroff and powercycle commands.

Tested on RHEL3 kernel 2.4.21-20.ELsmp on a PowerEdge 2600.  The standard
ipmi_poweroff driver cannot drive these systems.  With this patch, they
power off or powercycle as expected.
Signed-off-by: NMatt Domsch <Matt_Domsch@dell.com>
Signed-off-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The "null message handler" in the IPMI driver is used in startup and panic
situations to handle messages.  It was only designed to work with messages
from the local management controller, but in some cases it was used to get
messages from remote managmenet controllers, and the system would then
panic.  This patch makes the "null message handler" in the IPMI driver more
general so it works with any kind of message.
Signed-off-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This adds MODULE_VERSION, MODULE_DESCRIPTION, and MODULE_AUTHOR tags to the
IPMI driver modules.  Also changes the MODULE_VERSION to remove the
prepended 'v' on each value, consistent with the module versioning policy.

This patch also removes all the version information from everything except
the ipmi_msghandler module.
Signed-off-by: NMatt Domsch <Matt_Domsch@dell.com>
Signed-off-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The ipmi driver does not have a way to handle firmware-generated events
which have the OEM[012] Data Available flags set.  In such a case, the
SMS_ATN bit may never get cleared by firmware, leaving the driver looping
infinitely but never able to make any progress.

This patch first simplifies storage and use of the data returned from an
IPMI Get Device ID command.

It then creates a new per-OEM handler hook, which should know how to handle
events with the OEM[012] Data Available flags set.  It then uses this to
implement a workaround for IPMI 1.5-capable Dell PowerEdge servers which
are susceptable to setting the OEM[012] Data Available flags when the
driver can't handle it.
Signed-off-by: NMatt Domsch <Matt_Domsch@dell.com>
Signed-off-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There are some interactions between IPMI NMI timeouts and the other operations
of the IPMI driver.  This make sure those interactions are handled properly.
Signed-off-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix some problems with the high-res timer support.
Signed-off-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

IPMI allows multiple IPMB channels on a single interface, and each channel
might have a different IPMB address.  However, the driver has only one IPMB
address that it uses for everything.  This patch adds new IOCTLS and a new
internal interface for setting per-channel IPMB addresses and LUNs.  New
systems are coming out with support for multiple IPMB channels, and they are
broken without this patch.
Signed-off-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch replaces homebrew DMI scanning code in IPMI System Interface driver
with dmi_find_device() call.
Signed-off-by: NAndrey Panin <pazke@donpac.ru>
Cc: Corey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch converts kcalloc(1, ...) calls to use the new kzalloc() function.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

While installing Debian on our new IBM X41 Tablet, I tried briefly to use
the built-in Atmel TPM.  The Athmel TPM is also located on the LPC-bus of
the ICH6.  To make it work I had to apply the following patch:
Signed-off-by: NPhilipp Matthias Hahn <pmhahn@titan.lahn.de>
Acked-by: NKylene Jo Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The HPET driver is using a parts per second drift factor instead of the
standard parts per million drift the time interpolator code expects.  This
patch fixes that problem and updates the URL for the HPET spec.
Signed-off-by: NAlex Williamson <alex.williamson@hp.com>
Cc: "Robert W. Picco" <bob.picco@hp.com>
Acked-by: N"Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Based on a patch from Andr Pereira de Almeida <andre@cachola.com.br>

It might be possible for the saved pointer (*p) to become invalid in
between vc_resizes, so saving the screen offset instead of the screen
pointer is saner.

This bug is very hard to trigger though, but Andre probably did, if he's
submitting this patch.  Anyway, with Andre's patch, it's still possible for
the offsets to be still illegal, if the new screen size is smaller than the
old one.  So I've also added checks if the offsets are still within the
screenbuffer size.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I've had WARN_CONSOLE_UNLOCKED warnings when calling TIOCLINUX
TIOCL_BLANKSCREEN and TIOCL_UNBLANKSCREEN.

(I'm blind and I use a braille display.  I use those functions to blank my
laptop's screen so people don't read it, and hopefully to conserve power.)

The warnings are from these places:
do_blank_screen at drivers/char/vt.c:2754 (Not tainted)
save_screen at drivers/char/vt.c:575 (Not tainted)
do_unblank_screen at drivers/char/vt.c:2822 (Not tainted)
set_palette at drivers/char/vt.c:2908 (Not tainted)

At a glance I would think the following patch ought to fix that.  Tested on
one machine.  Could you please tell me if this is correct and/or forward
the patch where appropriate...
Signed-off-by: NStephane Doyon <s.doyon@videotron.ca>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove old obsolete event.
Signed-off-by: NStelian Pop <stelian@popies.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Newer Sony VAIO models (VGN-S480, VGN-S460, VGN-S3XP etc) use a new method to
initialize the SPIC device.  The new way to initialize (and disable) the
device comes directly from the AML code in the _CRS, _SRS and _DIS methods
from the DSDT table.  This patch adds support for the new models.
Signed-off-by: NErik Waling <erikw@acc.umu.se>
Signed-off-by: NStelian Pop <stelian@popies.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

this is the last serial driver not using initcalls.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: <jeff@uclinux.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

this gets rid of the last two explicit initializations in misc.c
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Yet another architecture not coverd by GEN_RTC - sparc64 never picked
it until now and it doesn't have asm/rtc.h to go with it, so it
wouldn't compile anyway (or have these ioctls in the user-visible
headers, for that matter).

FWIW, I'm very tempted to introduce ARCH_HAS_GEN_RTC and have it set
in arch/*/Kconfig for architectures that know what to do with this
stuff - for something supposedly generic the list of architectures
where it doesn't work is getting too long...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based upon a report from Jason Wever.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Actually, proper fix of that breakage is embarrassingly simple - it's yet
another gratitious leftover include of asm/segment.h, so incremental to the
previos would be removal of that BROKEN and removal of bogus include from
mxser.c itself.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Al Viro noticed that MGA wouldn't build on non AGP systems.
Signed-off-by: NDave Airlie <airlied@linux.ie>

This patch contains the following small cleanups:
- make two needlessly global functions static
- drm_sysfs.c: every file should #include the header with the prototypes
              of the global functions it is offering
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NDave Airlie <airlied@linux.ie>

On 32-bit PPC a 0 handle is valid for AGP space, the 32/64 lookup
doesn't handle 0 correctly.

From: Ben Herrenschmidt <benh@kernel.crashing.org> and Paul Mackerras <paulus@samba.org>
Signed-off-by: NDave Airlie <airlied@linux.ie>

$ make menuconfig
scripts/kconfig/mconf arch/i386/Kconfig
drivers/char/Kconfig:847:warning: 'select' used by config symbol
'TANBAC_TB0219' refer to undefined symbol 'PCI_VR41XX'

Here is a patch for this warning fix.
Signed-off-by: NYoichi Yuasa <yuasa@hh.iij4u.or.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch has added TANBAC VR4131 multichip module in arch/mips/Kconfig
Signed-off-by: NYoichi Yuasa <yuasa@hh.iij4u.or.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Renamed global variables used to convey if the watchdog is enabled and
periodicity of the timer and moved the declarations into a header for these
variables
Signed-off-by: NMatt McClintock <msm@freescale.com>
Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>