Make sure declarations stay in sync with definitions by keeping all 
extern declarations in common .h files.
Signed-off-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Remove extra dumb-looking blank line that snuck in somehow.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Include <rdma/...> headers after <asm/...> headers.
Signed-off-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Fix a crash if the driver has to wait for a QP reference to be dropped
when destroying the QP.
Signed-off-by: NEthan Burns <eaburns@iol.unh.edu>
Acked-by: NTom Tucker <tom@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

eHCA2 supports QP queues that can be as small as 512 bytes. This
greatly reduces memory overhead for consumers that use lots of QPs
with small queues (e.g. RDMA-only QPs). Apart from dealing with
firmware, this code needs to manage bite-sized chunks of kernel pages,
making sure that no kernel page is shared between different protection
domains.
Signed-off-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com>

They're only used in ehca_qp.c, so make them static to that file.
Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

ehca2ib_return_code() is not used in any fast path, and making it
non-inline saves ~1.5K of code.
Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Add support for MR pages larger than 4K on eHCA2. This reduces
firmware memory consumption.  If enabled via the mr_largepage module
parameter, the MR page size will be determined based on the MR length
and the hardware capabilities -- if the MR is >= 16M, 16M pages are
used, for example.
Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

    
The error handling code at err_wrid in create_qp_common() does not
handle a userspace QP attached to an SRQ correctly, since it ends up
in the else clause of the if statement.  This means it tries to
kfree() the uninitialized qp->sq.wrid and qp->rq.wrid pointers.  Fix
this so we only free the wrid arrays for kernel QPs.

Pointed out by Michael S. Tsirkin <mst@dev.mellanox.co.il>.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The FW command token is currently only updated on a command completion
event. This means that on command timeout, the same token will be
reused for new command, which results in a mess if the timed out
command *does* eventually complete.
Signed-off-by: NMichael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The ipath_layer.[ch] code was an attempt to provide a single interface
for the ipath verbs and ipath_ether code to use.  As verbs
functionality increased, the layer's functionality became insufficient
and the verbs code broke away to interface directly to the driver.
The failed attempt to get ipath_ether upstream was the final nail in
the coffin and now it sits quietly in a dark kernel.org corner waiting
for someone to notice the smell and send it along to it's final
resting place.  Roland Dreier was that someone -- this patch expands
on his work...
Signed-off-by: NArthur Jones <arthur.jones@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Temporarily allocated struct mlx4_qp_context *context is leaked by
several error paths.  The patch takes advantage of the return value
'err' being preinitialized to -EINVAL.

Spotted by Coverity (CID 1768).
Signed-off-by: NFlorin Malita <fmalita@gmail.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Slab destructors were no longer supported after Christoph's
c59def9f change. They've been
BUGs for both slab and slub, and slob never supported them
either.

This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc).

Here is a short excerpt of the semantic patch performing
this transformation:

@@
type T2;
expression x;
identifier f,fld;
expression E;
expression E1,E2;
expression e1,e2,e3,y;
statement S;
@@

 x =
- kmalloc
+ kzalloc
  (E1,E2)
  ...  when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\)
- memset((T2)x,0,E1);

@@
expression E1,E2,E3;
@@

- kzalloc(E1 * E2,E3)
+ kcalloc(E1,E2,E3)

[akpm@linux-foundation.org: get kcalloc args the right way around]
Signed-off-by: NYoann Padioleau <padator@wanadoo.fr>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Acked-by: NRussell King <rmk@arm.linux.org.uk>
Cc: Bryan Wu <bryan.wu@analog.com>
Acked-by: NJiri Slaby <jirislaby@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Acked-by: NRoland Dreier <rolandd@cisco.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Acked-by: NDmitry Torokhov <dtor@mail.ru>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NMauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: NPierre Ossman <drzeus-list@drzeus.cx>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: NGreg KH <greg@kroah.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

    
Current code sets size0 to 0 at the start of work request posting
functions and then handles size0 == 0 specially within the loop over
work requests.  Change this so size0 is set along with f0 the first
time through the loop (when nreq == 0).  This makes the code easier to
understand by making it clearer that f0 and size0 are always
initialized if nreq != 0 without having to know that size0 == 0
implies nreq == 0.

Also annotate size0 with uninitialized_var() so that this doesn't
introduce a new compiler warning.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

    
Factor code to set UD entries out of the work request posting
functions into inline functions set_tavor_ud_seg() and
set_arbel_ud_seg().  This doesn't change the generated code in any
significant way, and makes the source easier on the eyes.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

    
Factor code to set remote address and atomic segment entries out of the
work request posting functions into inline functions set_raddr_seg()
and set_atomic_seg().  This doesn't change the generated code in any
significant way, and makes the source easier on the eyes.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Factor code to set remote address, atomic and datagram segments out of
mlx4_ib_post_send() into small helper functions.  This doesn't change
the generated code in any significant way, and makes the source easier
on the eyes.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Factor code to set data segment entries out of mlx4_ib_post_send()
into set_data_seg().  This cleans up the code and lets the compiler do
a better job -- on x86_64:

add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-16 (-16)
function                                     old     new   delta
mlx4_ib_post_send                           1598    1582     -16
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Factor code to set data segment entries out of the work request
posting functions into inline functions mthca_set_data_seg() and
mthca_set_data_seg_inval().  This makes the code more readable and
also allows the compiler to do a better job -- on x86_64:

add/remove: 0/0 grow/shrink: 0/6 up/down: 0/-69 (-69)
function                                     old     new   delta
mthca_arbel_post_srq_recv                    373     369      -4
mthca_arbel_post_receive                     570     562      -8
mthca_tavor_post_srq_recv                    520     508     -12
mthca_tavor_post_send                       1344    1330     -14
mthca_arbel_post_send                       1481    1467     -14
mthca_tavor_post_receive                     792     775     -17
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Return the receive queue sizes for both userspace QPs and kernel Qps
(not just kernel QPs) from mlx4_ib_query_qp().  Also zero the send
queue sizes for userspace QPs to avoid a possible information leak,
and set the max_inline_data for kernel QPs to 0 since inline sends are
not supported for kernel QPs.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Commit 9db48926 ("drivers/infiniband/hw/mthca/mthca_qp: kill uninit'd
var warning") added "= 0" to the declarations of f0 to shut up gcc
warnings.  However, there's no point in making the code bigger by
initializing f0 to a random value just to get rid of a warning;
setting f0 to 0 is no safer than just using uninitialized_var(), which
documents the situation better and gives smaller code too.  For example, 
on x86_64:

add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-16 (-16)
function                                     old     new   delta
mthca_tavor_post_send                       1352    1344      -8
mthca_arbel_post_send                       1489    1481      -8
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

It has no callers and is completely dead code.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Make some functions that are only used in a single .c file static.  In
addition to being a cleanup, this shrinks the generated code.  On x86_64:

add/remove: 1/3 grow/shrink: 2/1 up/down: 4777/-4956 (-179)
function                                     old     new   delta
handle_errors                                  -    3994   +3994
__verbs_timer                                 42     710    +668
ipath_do_ruc_send                           2131    2246    +115
ipath_no_bufs_available                      136       -    -136
ipath_disarm_senderrbufs                     639       -    -639
ipath_ib_timer                               658       -    -658
ipath_intr                                  5878    2355   -3523
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

When warning about out-of-date firmware, current mthca code messes up
the formatting of the version if the subminor doesn't have three
digits.  It doesn't fill the field with 0s so we end up with:

    ib_mthca 0000:0b:00.0: HCA FW version 1.1.  0 is old (1.2.  0 is current).

Change the format from "%3d" to "%03d" to get the right thing printed.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The mthca driver supports both MSI and MSI-X.  However, MSI-X works with
all hardware that the driver handles, and provides a superset of what
MSI does, so there's no point in having code for both.  Schedule MSI
support for removal in 2008 to give anyone who actually needs MSI and
who can't use MSI time to speak up.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Run the existing ehca code through checkpatch.pl and clean up the
worst of the coding style violations.
Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Split ehca_set_pagebuf() into three functions depending on MR type
(phys/user/fast) and remove superfluous ehca_set_pagebuf_1().
Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

- Rename struct ehca_mr fields to clearly distinguish between kernel
  and HW page size.
- Sort struct ehca_mr_pginfo into a common part and a union containing
  specific fields for physical, user and fast MR
Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Instead of one error mapping function for each potential error source
in ehca_mrmw.c, use a centralized function that handles all cases,
saving a three-figure line count.
Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Autodetection was missing a few HW revisions, causing certain eHCA1
revisions to be treated like eHCA2.  Fixed.
Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

When clearing the ib_ah_attr parameter in to_ib_ah_attr(), use sizeof
*ib_ah_attr instead of sizeof *path.  This is the same bug as was
fixed for mthca in 99d4f22e ("IB/mthca: Use correct structure size in
call to memset()"), but the code was cut and pasted into mlx4 before the
fix was merged.
Signed-off-by: NDotan Barak <dotanb@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

When a QP is in the INIT state, the sched_queue field hasn't been given 
to the firmware yet, so the firmware cannot return the value when the QP 
is queried.  To handle this, use the port number that is saved in the 
driver's QP data structure.

Found by Dotan Barak and Yaron Gepstein of Mellanox.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Correct the mask used to get the flow label, since the field is 20 bits, 
not 24 bits.

Found by Dotan Barak and Yaron Gepstein of Mellanox. 
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

drivers/infiniband/hw/mthca/mthca_qp.c: In function
  ‘mthca_tavor_post_send’:
drivers/infiniband/hw/mthca/mthca_qp.c:1594: warning: ‘f0’ may be used
  uninitialized in this function
drivers/infiniband/hw/mthca/mthca_qp.c: In function
  ‘mthca_arbel_post_send’:
drivers/infiniband/hw/mthca/mthca_qp.c:1949: warning: ‘f0’ may be used
  uninitialized in this function

Initializing 'f0' is not strictly necessary in either case, AFAICS.

I was considering use of uninitialized_var(), but looking at the
complex flow of control in each function, I feel it is wiser and
safer to simply zero the var and be certain of ourselves.
Signed-off-by: NJeff Garzik <jeff@garzik.org>