In order for hibernation to reliably work we need to cleanup more
thoroughly the compute ring. Hibernation is different from suspend
resume as when we resume from hibernation the hardware is first
fully initialize by regular kernel then freeze callback happens
(which correspond to a suspend inside the radeon kernel driver)
and turn off each of the block. It turns out we were not cleanly
shutting down the compute ring. This patch fix that.

Hibernation and suspend to ram were tested (several times) on :
Bonaire
Hawaii
Mullins
Kaveri
Kabini

Changed since v1:
  - Factor the ring stop logic into a function taking ring as arg.

Cc: stable@vger.kernel.org
Signed-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch deinlines indirect register accessor functions.

These functions perform two mmio accesses, framed by spin lock/unlock.
Spin lock/unlock by itself takes more than 50 cycles in ideal case
(if lock is exclusively cached on current CPU).

With this .config: http://busybox.net/~vda/kernel_config,
after uninlining these functions have sizes and callsite counts
as follows:

r600_uvd_ctx_rreg: 111 bytes, 4 callsites
r600_uvd_ctx_wreg: 113 bytes, 5 callsites
eg_pif_phy0_rreg: 106 bytes, 13 callsites
eg_pif_phy0_wreg: 108 bytes, 13 callsites
eg_pif_phy1_rreg: 107 bytes, 13 callsites
eg_pif_phy1_wreg: 108 bytes, 13 callsites
rv370_pcie_rreg: 111 bytes, 21 callsites
rv370_pcie_wreg: 113 bytes, 24 callsites
r600_rcu_rreg: 111 bytes, 16 callsites
r600_rcu_wreg: 113 bytes, 25 callsites
cik_didt_rreg: 106 bytes, 10 callsites
cik_didt_wreg: 107 bytes, 10 callsites
tn_smc_rreg: 106 bytes, 126 callsites
tn_smc_wreg: 107 bytes, 116 callsites
eg_cg_rreg: 107 bytes, 20 callsites
eg_cg_wreg: 108 bytes, 52 callsites

Functions r100_mm_rreg() and r100_mm_rreg() have a fast path and
a locked (slow) path. This patch deinlines only slow path.

r100_mm_rreg_slow: 78 bytes, 2083 callsites
r100_mm_wreg_slow: 81 bytes, 3570 callsites

Reduction in code size is more than 65,000 bytes:

    text     data      bss       dec     hex filename
85740176 22294680 20627456 128662312 7ab3b28 vmlinux.before
85674192 22294776 20627456 128598664 7aa4288 vmlinux
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We have that bug for years and some users report side effects when fixing it on older hardware.

So revert it for VM_CONTEXT0_PAGE_TABLE_END_ADDR, but keep it for VM 1-15.
Signed-off-by: NChristian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The mapping range is inclusive between starting and ending addresses.
Signed-off-by: NChristian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds support to process short HPD irqs on CIK gpus.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Registers that can be fetched from the info ioctl.
Tested-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

To make sure the writes go through the pci bridge.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=90741Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

v2: disable it on suspend
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable at init and disable on fini. Workaround for hardware problems.

v2 (chk): extend commit message
v3: add new function
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com> (v2)
Cc: stable@vger.kernel.org

Emit the EOP twice to avoid cache flushing problems.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NSlava Grigorev <slava.grigorev@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NSlava Grigorev <slava.grigorev@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need to wait for the GPUVM flush to complete.  There
was some confusion as to how this mechanism was supposed
to work.  The operation is not atomic.  For GPU initiated
invalidations you need to read back a VM register to
introduce enough latency for the update to complete.

v2: drop gart changes
v3: just read back rather than polling
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Use multiple VMIDs for each VM, one for each ring. That allows
us to execute flushes separately on each ring, still not ideal
cause in a lot of cases rings can share IDs.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Previously we just allocated space for four hardware semaphores
in each software semaphore object. Make software semaphore objects
represent only one hardware semaphore address again by splitting
the sync code into it's own object.

v2: fix typo in comment
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use ring structure instead of index and provide vm_id and pd_addr separately.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Always need to set bit 0 of RLC_CGTT_MGCG_OVERRIDE
to avoid unreliable doorbell updates in some cases.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Workaround for memory link training on certain variants
of 0x6649.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The power management code calls into the display code for
certain things.  If certain power management sysfs attributes
are called before the driver has finished initializing all of
the hardware we can run into problems with uninitialized
modesetting state.  Add a check to make sure modesetting
init has completed to the bandwidth update callbacks to
fix this.  Can be triggered by the tlp and laptop start
up scripts depending on the timing.

bugs:
https://bugzilla.kernel.org/show_bug.cgi?id=83611
https://bugs.freedesktop.org/show_bug.cgi?id=85771Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

CE ram size is 32k/0k/0k for GFX/CS0/CS1 with CIK

Ported from amdgpu driver.
Signed-off-by: NJammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Adds an extra argument to radeon_bo_create, which is only used in radeon_prime.c.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Not the whole world is a radeon! :-)
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Helpful for debugging as the version shows up in a
register dump.

Cc: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise we may fail to init the second compute ring.
Noticed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This might decrease the chance of IH ring buffer overflows.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use the same format for all ring indices, and fix the calculation of the
post-overflow RPTR.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise the bit remains set in rdev->ih.rptr, so the wptr can never
match that and we still have an infinite loop.

This fix allows me to successfully recover from an IH ring buffer
overflow.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This allows us to specify if we want to sync to
the shared fences of a reservation object or not.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If we assign a Radeon device to a virtual machine, we can no longer
assume a fixed hardware topology, like the GPU having a parent device.
This patch simply adds a few pci_is_root_bus() tests to avoid passing
a NULL pointer to PCI access functions, allowing the radeon driver to
work in a QEMU 440FX machine with an assigned HD8570 on the emulated
PCI root bus.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Blocking completely innocent processes with a GPU reset is
a pretty bad idea. Just set needs_reset and let the next
command submission or fence wait do the job.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This fixes a problem with GPU resets and TLB flushes on SI/CIK.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=82912Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Need to initialize the mask to 0 on init, otherwise it
keeps increasing.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=82581

v2: also fix cu count
v3: split count fix into separate patch
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Cc: stable@vger.kernel.org

This fixes the CU count reported to userspace for
OpenCL.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=82581Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Cc: stable@vger.kernel.org

Fixes lockups due to CP read GPUVM faults when running piglit on Cape
Verde.

v2 (chk): apply the fix to R600+ as well, on CIK only the GFX CP has
	  a PFP, add more comments to R600 code, enable flushing again
v3: (agd5f): only apply to 7xx+.  r6xx does not have the packet.
v4: (agd5f): split flush change into a separate patch, fix formatting
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Tested-by: NMichel Dänzer <michel.daenzer@amd.com>

It isn't necessary for command streams generated by the kernel (at least
not while we aren't storing ring or indirect buffers in VRAM).
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch moves to radeon the initialization of compute vmid.

That initializations was done in kfd-->kgd interface, but doing it in radeon
as part of radeon's H/W initialization routines is more appropriate.

In addition, this simplifies the kfd-->kgd interface.

The patch removes the function from the interface file and from the interface
declaration file.

The function initializes memory apertures to fixed base/limit address and non
cached memory types.
Signed-off-by: NBen Goz <ben.goz@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

May fix hangs in some cases.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Skip the "manual" pageflip completion checks via polling and
guessing in the vblank handler radeon_crtc_handle_vblank() on
asics which are known to reliably support hw pageflip completion
irqs. Those pflip irqs are a more reliable and race-free method
of handling pageflip completion detection, whereas the "classic"
polling method has some small races in combination with dpm on,
and with the reworked pageflip implementation since Linux 3.16.

On old asics without pflip irqs, the classic method is used.

On asics with known good pflip irqs, only pflip irqs are used
by default, but a new module parameter "use_pflipirqs" allows to
override this in case we encounter asics in the wild with
unreliable or faulty pflip irqs. A module parameter of 0 allows
to use the classic method only in such a case. A parameter of 1
allows to use both classic method and pflip irqs as additional
band-aid to avoid some small races which could happen with the
classic method alone. The setting 1 gives Linux 3.16 behaviour.

Hw pflip irqs are available since R600.

Tested on DCE-4, AMD Cedar - FirePro 2270.

v2:  agd5f: only enable pflip interrupts on DCE4+ as they are not
reliable on older asics.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Older firmware didn't support the new nop packet.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAndreas Boll <andreas.boll.dev@gmail.com>