Added the model=auto to STAC/IDT codecs to use the BIOS default setup
explicitly.  It can be used to disable the device-specific model quirk
in the driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Removed its own save/restore functions and replaced with the common code.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Clean up IDT92HD7x quirks for HP laptops with SND_PCI_QUIRK_MASK().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Force speaker pin config with model=hp-dv5 model for cases when bios
doesn't set it up properly. All reported hp laptops using model=hp-dv5
model have speaker at pin 0x0d with same config, so it's safe to add
this within hp-dv5 model.

Reference: alsa-devel mailing list thread on
    http://mailman.alsa-project.org/pipermail/alsa-devel/2009-February/014390.htmlSigned-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the helper function snd_hda_multi_out_dig_cleanup() to clean up
the digital outputs with multi setup.  This call is needed in cases
the codec supports multiple digital outputs as slaves.  Otherwise the
slave widgets aren't properly cleaned up.

For a single digital output (e.g. in patch_conexant.c), this call isn't
needed.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Change HP dv7 quirk: although reported to work with hp-m4 model
(https://bugzilla.novell.com/show_bug.cgi?id=445321), the original
report doesn't contain info about testing of internal microphone.

Recently I received a report about internal mic not working
(https://qa.mandriva.com/show_bug.cgi?id=44855#c193), this must be
related with the forced line in on pin 0x0e done with hp-m4 model. Thus
change the current quirk from STAC_HP_M4 to STAC_HP_DV5, later reported
to be fixed on a provided kernel with this change
(https://qa.mandriva.com/show_bug.cgi?id=44855#c196).
Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add STAC_DELL_S14 quirk for new laptop series. Removed un-needed pins
in pin_nids for stac92hd83xxx. Also reorganized connection selection
code for the respective ports per quirk define.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

After commit "ALSA: hda - Fix restore of pin configs at resume for
STAC/IDT codecs", the introduced stac_save_pin_cfgs function checks
already for pins == NULL case, saving then default pin configs from
machine with stac92xx_save_bios_config_regs. So we can remove the
extra checks when stac927x_brd_tbl[spec->board_config] == NULL.
Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Detect multiple digital-out pins in snd_hda_parse_pin_defconfig().
The dig_out_pin and dig_out_type fields become arrays.

The codec parser still doesn't use this multiple pins detection, though.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Clean up quirk lists with bit masks.
Also, sorted in numerical order for alc662_cfg_tbl[].
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When checking for input amps on pins 0x0a, 0x0d and 0x0f, and
initializing them for 92hd71xxx codec models, we must skip nid 0x0f
for 4-port models too like with 5-port models, as it is unused
(nid 0x0f is vendor reserved in 4-port models).
Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This adds a new sound quirk entry (model=ecs202) for an ecs motherboard
with IDT STAC9221 codec (1019:2950).
Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the ADATOut nid to a slave digital outs struct to allow output
via the DigOut pin.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Don't use uneeded/wrong third parameter for stac92xx_parse_auto_config
in patch_stac92hd71bxx (no SPDIF in).
Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Detect the number of connected ports and number of smuxes dynamically,
looking at pin configs, using new introduced functions
stac92hd71bxx_connected_ports and stac92hd71bxx_connected_smuxes. Also
use proper input mux configuration for 4port and 5port models.
Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Current code for STAC92HD71Bx and STAC92HD75Bx doesn't consider pin
complexes 0x20 and 0x27. Also for 4 port models, nids 0x0e and 0x0f
are vendor reserved. This commit changes code so it'll consider the
additional pin complexes for models that have it, and avoid reserved
nids to be touched on 4 port models.
Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added model=hp-dv5 for another HP dv5 model with AMD chip (103c:3600)

Reference: kernel bug#12440
	http://bugzilla.kernel.org/show_bug.cgi?id=12440Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some revisions of the 92hd71xxx codec families don't have input amps
on ports 0xa, 0xd and 0xf, so probe the widget caps on port 0xa and
check for support, if found run snd_hda_sequence_write_cache() on the
stac92hd71xxx_unmute_core_init verb list.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of fixed kcontrol_new element, build "Input Source" controls
dynamically.  If the number of input-source items is 0 or 1, we don't
need to create such a control.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The reference NID for the analog outputs of STAC/IDT codecs is set
to a fixed number 0x02.  But this isn't always correct and in many
codecs it points to a non-existing NID.

This patch fixes the initialization of the PCM reference NID taken
from the actually probed DAC list.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

An intel board (8086:0204) works only with model=ref.

Reference: Novell bug #406529
	https://bugzilla.novell.com/show_bug.cgi?id=406529Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add another LanParty reference board SND_PCI_QUIRK to quirk lists of
all codec families.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some revisions of the 92hd8xxx codec's not supporting port power
downs in which the using of it causes capture and also randomly
playback streams to not function at all. Thus by disabling it by
default and adding a option to enable it manually will fix all issue
on current and future revisions.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Port 0xe power mapping was incorrect set to 0x80 changed to the correct
value 0x40.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Gateway T1616 laptop needs EAPD always on while the current STAC9205
code turns off per HP plug.  Added a new model "eapd" to keep it on.

Reference: Novell bnc#467597
	https://bugzilla.novell.com/show_bug.cgi?id=467597Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Check the present pin control bit and avoid the write if it's already
set in patch_sigmatel.c.  This will reduce the number of verb execs at
jack plugging.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added model=hp-dv5 for HP dv4 (103c:30f7).

Reference: kernel bug #12440
	http://bugzilla.kernel.org/show_bug.cgi?id=12440Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Get rid of old VAIO static hack codes for STAC9872 and use the BIOS
auto-parser for all models.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

On the 92hd8xxx codecs port 0xe needs the connection selected to be the
last DAC in the list.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Assign the proper PCM digital I/O type (HDA_PCM_TYPE_*) for the digital
I/O on STAC/IDT codecs.  HDA_PCM_TYPE_HDMI is assigned for the HDMI I/O.

A similar framework is implemented to patch_realtek.c, but it's not
set up and still using only HDA_PCM_TYPE_SPDIF yet.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use the standard STAC/IDT auto-probing routine for non-static
STAC9872 codec probing.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

STAC/IDT codecs have often too large volume scales such as -96dB,
and exposing this as is results in too large scale in percentage
representation.

This patch adds the check of the volume scale and halves the
volume range if it's too large automatically.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixed invalid power mappings for ports 0xd and 0xe on 93hd83xxx codecs.
They were shifted right one too many bits.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The codec-parsing of STAC925x was utterly broken due to its unique
design unlike other STAC codecs.  It has a volume control only in NID
0x0e (similar as STAC9200), but the parser assumes that the amp is
available on each DAC widget.

The patch fixes the whole wrong stories: fix the initial volume,
assign the fixed "Master" volume, and avoid to create wrong volume
controls.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The value set in the commit 2465fb66
is actually wrong.  The value range is from 0 to 0x1f while the patch
sets to 0x7f.  Let's fix it.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix HP dv5 (103c:3603) built-in mic input.

Reference: kernel bug 12440
	http://bugzilla.kernel.org/show_bug.cgi?id=12440Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: stable@kernel.org

The selector widget 0x0e isn't initialized properly in the whole probe
process, thus it can be a wrong value depending on the BIOS setup.

This patch adds the init verb to set it to the max & unmuted.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix the bug introduced in commit c15c5060:
  sound/pci/hda/patch_sigmatel.c: In function ‘patch_stac92hd83xxx’:
  sound/pci/hda/patch_sigmatel.c:4765: warning: assignment from incompatible pointer type
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Resetting HP pinctl at the unplugged state may cause a sort of regression
on some devices because of their wrong pin configuration.

A simple workaround is to disable the pin reset.  This is ugly and may be
not good from the power-saving POV (if any), but damn simple.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: stable@kernel.org

Added amp nid for stac92hd8xxx families of codecs so the input amp
mixer is created.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>