- 20 2月, 2008 1 次提交
-
-
由 Pavel Emelyanov 提交于
This counter is currently write-only. Drawing an analogy with the similar tcp counter, I think that this one should be pointed by the sockets_allocated members of sctp_prot and sctpv6_prot. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Acked-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 2月, 2008 1 次提交
-
-
由 Vlad Yasevich 提交于
Thomas Dreibholz has reported that port numbers are not filled in the results of sctp_getladdrs() when the socket was bound to an ephemeral port. This is only true, if the address was not specified either. So, fill in the port number correctly. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
- 05 2月, 2008 2 次提交
-
-
由 Vlad Yasevich 提交于
When a user reads a partial notification message, do not update rwnd since notifications must not be counted towards receive window. Tested-by: NOliver Roll <mail@oliroll.de> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Vlad Yasevich 提交于
I was notified by Randy Stewart that lksctp claims to be "the reference implementation". First of all, "the refrence implementation" was the original implementation of SCTP in usersapce written ty Randy and a few others. Second, after looking at the definiton of 'reference implementation', we don't really meet the requirements. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
- 29 1月, 2008 3 次提交
-
-
由 Hideo Aoki 提交于
This patch introduces new memory accounting functions for each network protocol. Most of them are renamed from memory accounting functions for stream protocols. At the same time, some stream memory accounting functions are removed since other functions do same thing. Renaming: sk_stream_free_skb() -> sk_wmem_free_skb() __sk_stream_mem_reclaim() -> __sk_mem_reclaim() sk_stream_mem_reclaim() -> sk_mem_reclaim() sk_stream_mem_schedule -> __sk_mem_schedule() sk_stream_pages() -> sk_mem_pages() sk_stream_rmem_schedule() -> sk_rmem_schedule() sk_stream_wmem_schedule() -> sk_wmem_schedule() sk_charge_skb() -> sk_mem_charge() Removeing sk_stream_rfree(): consolidates into sock_rfree() sk_stream_set_owner_r(): consolidates into skb_set_owner_r() sk_stream_mem_schedule() The following functions are added. sk_has_account(): check if the protocol supports accounting sk_mem_uncharge(): do the opposite of sk_mem_charge() In addition, to achieve consolidation, updating sk_wmem_queued is removed from sk_mem_charge(). Next, to consolidate memory accounting functions, this patch adds memory accounting calls to network core functions. Moreover, present memory accounting call is renamed to new accounting call. Finally we replace present memory accounting calls with new interface in TCP and SCTP. Signed-off-by: NTakahiro Yasui <tyasui@redhat.com> Signed-off-by: NHideo Aoki <haoki@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The sock_wake_async() performs a bit different actions depending on "how" argument. Unfortunately this argument ony has numerical magic values. I propose to give names to their constants to help people reading this function callers understand what's going on without looking into this function all the time. I suppose this is 2.6.25 material, but if it's not (or the naming seems poor/bad/awful), I can rework it against the current net-2.6 tree. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 12月, 2007 2 次提交
-
-
由 Vlad Yasevich 提交于
During accept/migrate the code attempts to copy the addresses from the parent endpoint to the new endpoint. However, if the parent was bound to a wildcard address, then we end up pointlessly copying all of the current addresses on the system. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
SCTP accept code tries to add a newliy created socket to a bind bucket without holding a lock. On a really busy system, that can causes slab corruptions. Add a lock around this code. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 11月, 2007 1 次提交
-
-
由 Vlad Yasevich 提交于
Convert the custom hash list traversals to use hlist functions. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
- 08 11月, 2007 1 次提交
-
-
由 Vlad Yasevich 提交于
After learning more about rcu, it looks like the ADD-IP hadling doesn't need to call call_rcu_bh. All the rcu critical sections use rcu_read_lock, so using call_rcu_bh is wrong here. Now, restore the local_bh_disable() code blocks and use normal call_rcu() calls. Also restore the missing return statement. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
- 07 11月, 2007 1 次提交
-
-
由 Eric Dumazet 提交于
Trivial patch to make "sctcp,sctpv6" protocols uses the fast "inuse sockets" infrastructure Each protocol use then a static percpu var, instead of a dynamic one. This saves some ram and some cpu cycles Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 10月, 2007 1 次提交
-
-
由 Al Viro 提交于
copy_to_user() into on-stack array Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 10月, 2007 5 次提交
-
-
由 Stephen Hemminger 提交于
Expansion of original idea from Denis V. Lunev <den@openvz.org> Add robustness and locking to the local_port_range sysctl. 1. Enforce that low < high when setting. 2. Use seqlock to ensure atomic update. The locking might seem like overkill, but there are cases where sysadmin might want to change value in the middle of a DoS attack. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Add port randomization rather than a simple fixed rover for use with SCTP. This makes it act similar to TCP, UDP, DCCP when allocating ports. No longer need port_alloc_lock as well (suggestion by Brian Haley). Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
Add SCTP-AUTH API. The API implemented here was agreed to between implementors at the 9th SCTP Interop. It will be documented in the next revision of the SCTP socket API spec. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
This patch makes the following needlessly global variables static: - sctp_memory_pressure - sctp_memory_allocated - sctp_sockets_allocated Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Horman 提交于
This patch introduces autotuning to the sctp buffer management code similar to the TCP. The buffer space can be grown if the advertised receive window still has room. This might happen if small message sizes are used, which is common in telecom environmens. New tunables are introduced that provide limits to buffer growth and memory pressure is entered if to much buffer spaces is used. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 9月, 2007 2 次提交
-
-
由 Vlad Yasevich 提交于
Since the sctp_sockaddr_entry is now RCU enabled as part of the patch to synchronize sctp_localaddr_list, it makes sense to change all handling of these entries to RCU. This includes the sctp_bind_addrs structure and it's list of bound addresses. This list is currently protected by an external rw_lock and that looks like an overkill. There are only 2 writers to the list: bind()/bindx() calls, and BH processing of ASCONF-ACK chunks. These are already seriealized via the socket lock, so they will not step on each other. These are also relatively rare, so we should be good with RCU. The readers are varied and they are easily converted to RCU. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NSridhar Samdurala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
sctp_localaddr_list is modified dynamically via NETDEV_UP and NETDEV_DOWN events, but there is not synchronization between writer (even handler) and readers. As a result, the readers can access an entry that has been freed and crash the sytem. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NSridhar Samdurala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 8月, 2007 2 次提交
-
-
由 Vlad Yasevich 提交于
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Vlad Yasevich 提交于
sctp_bindx() allows the use of unspecified port. The problem is that every address we bind to ends up selecting a new port if the user specified port 0. This patch allows re-use of the already selected port when the port from bindx was 0. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
- 01 8月, 2007 5 次提交
-
-
由 Vlad Yasevich 提交于
When issuing a connect call on an AF_INET6 sctp socket with a IPv4-mapped destination, the peer address that is returned by getpeeraddr() should be v4-mapped as well. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Sebastian Siewior 提交于
unlock the reader lock in error case. Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 sebastian@breakpoint.cc 提交于
Fixes the following sparse warnings: net/sctp/sm_make_chunk.c:1457:9: warning: symbol 'len' shadows an earlier one net/sctp/sm_make_chunk.c:1356:23: originally declared here net/sctp/socket.c:1534:22: warning: symbol 'chunk' shadows an earlier one net/sctp/socket.c:1387:20: originally declared here Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 sebastian@breakpoint.cc 提交于
sctp_chunk_cachep & sctp_bucket_cachep is used module global, so move it to a header file. Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 sebastian@breakpoint.cc 提交于
Forward declarion is static, the function itself is not. Make it consistent. Signed-off-by: NSebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
- 19 7月, 2007 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
- 06 7月, 2007 2 次提交
-
-
由 Vlad Yasevich 提交于
In-kernel sockets created with sock_create_kern don't usually have a file and file descriptor allocated to them. As a result, when SCTP tries to check the non-blocking flag, we Oops when dereferencing a NULL file pointer. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
Correctly dereference bytes_copied in sctp_copy_laddrs(). I totally must have spaced when doing this. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 6月, 2007 1 次提交
-
-
由 Zach Brown 提交于
sctp_sock_migrate() grabs the socket lock on a newly allocated socket while holding the socket lock on an old socket. lockdep worries that this might be a recursive lock attempt. task/3026 is trying to acquire lock: (sk_lock-AF_INET){--..}, at: [<ffffffff88105b8c>] sctp_sock_migrate+0x2e3/0x327 [sctp] but task is already holding lock: (sk_lock-AF_INET){--..}, at: [<ffffffff8810891f>] sctp_accept+0xdf/0x1e3 [sctp] This patch tells lockdep that this locking is safe by using lock_sock_nested(). Signed-off-by: NZach Brown <zach.brown@oracle.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
- 19 6月, 2007 2 次提交
-
-
由 Neil Horman 提交于
This is the split out of the patch that we agreed I should split out from my last patch. It changes space_left to be computed in the same way the to variable is. I know we talked about changing space_left to an int, but I think size_t is more appropriate, since we should never have negative space in our buffer, and computing using offsetof means space_left should now never drop below zero. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Acked-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
由 Neil Horman 提交于
I noted the other day while looking at a bug that was ostensibly in some perl networking library, that we strictly avoid allowing getsockopt operations to complete if we pass in oversized buffers. This seems to make libraries like Perl::NET malfunction since it seems to allocate oversized buffers for use in several operations. It also seems to be out of line with the way udp, tcp and ip getsockopt routines handle buffer input (since the *optlen pointer in both an input and an output and gets set to the length of the data that we copy into the buffer). This patch brings our getsockopt helpers into line with other protocols, and allows us to accept oversized buffers for our getsockopt operations. Tested by me with good results. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Acked-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
-
- 14 6月, 2007 4 次提交
-
-
由 Vlad Yasevich 提交于
Currently, if the socket is owned by the user, we drop the ICMP message. As a result SCTP forgets that path MTU changed and never adjusting it's estimate. This causes all subsequent packets to be fragmented. With this patch, we'll flag the association that it needs to udpate it's estimate based on the already updated routing information. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Acked-by: NSridhar Samudrala <sri@us.ibm.com>
-
由 Vlad Yasevich 提交于
If the copy_to_user or copy_user calls fail in sctp_getsockopt_local_addrs(), the function should free locally allocated storage before returning error. Spotted by Coverity. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Acked-by: NSridhar Samudrala <sri@us.ibm.com>
-
由 Vlad Yasevich 提交于
Allow sctp_bindx() to accept multiple address with unspecified port. In this case, all addresses inherit the first bound port. We still catch full mis-matches. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Acked-by: NSridhar Samudrala <sri@us.ibm.com>
-
由 Vlad Yasevich 提交于
During peeloff of AF_INET6 socket, the inet6_sk(sk)->daddr wasn't set correctly since the code was assuming IPv4 only. Now we use a correct call to set the destination address. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Acked-by: NSridhar Samudrala <sri@us.ibm.com>
-
- 11 5月, 2007 2 次提交
-
-
由 Vlad Yasevich 提交于
I broke the non-wildcard case recently. This is to fixes it. Now, explictitly bound addresses can ge retrieved using the API. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
SCTP was checking for NULL when trying to detect hmac allocation failure where it should have been using IS_ERR. Also, print a rate limited warning to the log telling the user what happend. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 5月, 2007 1 次提交
-
-
由 Michael Opdenacker 提交于
Signed-off-by: NMichael Opdenacker <michael@free-electrons.com> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-