So that callers can specify which range to return.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <loghyr@primarydata.com>

If current IO cannot be completed due to some transient errors,
LD may want to ask generic layer to resend the request through
pnfs again.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <loghyr@primarydata.com>

Let it return current nfs_pgio_mirror in use depending on pg_mirror_count.
For read, we always use pg_mirrors[0], so this effectively gives us freedom
to use pg_mirror_idx to track the actual mirror to read from through out the
IO stack.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <loghyr@primarydata.com>

so that we don't reset desc->pg_mirror_idx for read unnecessarily.
Remove WARN_ON_ONCE from __nfs_pageio_add_request to allow LD to
set pg_mirror_idx for read where pg_mirror_count is always 1.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <loghyr@primarydata.com>

So that we can detect the case if some layout segments are still
pinned which is surely a bug that we need to fix.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>

This skips the WARN_ON_ONCE, but doesnt change behavior (the memcmp would
fail).
Signed-off-by: NWeston Andros Adamson <dros@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

The current mirroring code only notices short writes to the first
mirror. This patch keeps per-mirror byte counts and only considers
a byte to be written once all mirrors report so.
Signed-off-by: NWeston Andros Adamson <dros@primarydata.com>

This patch adds mirrored write support to the pgio layer. The default
is to use one mirror, but pgio callers may define callbacks to change
this to any value up to the (arbitrarily selected) limit of 16.

The basic idea is to break out members of nfs_pageio_descriptor that cannot
be shared between mirrored DSes and put them in a new structure.
Signed-off-by: NWeston Andros Adamson <dros@primarydata.com>

Pass ds_commit_idx through the nfs commit path. It's used to select
the commit bucket when using pnfs and is ignored when not using pnfs.
Several functions had to be changed: nfs_retry_commit,
nfs_mark_request_commit, pnfs_mark_request_commit and the pnfs layout
driver .mark_request_commit functions.
Signed-off-by: NTom Haynes <loghyr@primarydata.com>

'ds_commit_idx' is a better name - it is used to select the right
commit bucket for pnfs.
Signed-off-by: NWeston Andros Adamson <dros@primarydata.com>

This is needed for mirrored DS support, where multuple requests
cover the same range.
Signed-off-by: NWeston Andros Adamson <dros@primarydata.com>

This is needed to support mirrored writes - the first write can't just
trash the lseg, we need to keep it around until all mirrors have
written.
Signed-off-by: NWeston Andros Adamson <dros@primarydata.com>

Add a new operation to nfs_pageio_ops that is called on nfs_pageio_complete.
Signed-off-by: NWeston Andros Adamson <dros@primarydata.com>

Instead of calling layoutreturn directly, call pnfs_error_mark_layout_for_return
to mark layouts for return and let generic code return layout when
layout segments are freed.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

Conflicts:
	fs/nfs/filelayout/filelayout.c

So that pnfs path is not disabled for ever.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

If current lseg is the last lseg marked with NFS_LSEG_LAYOUTRETURN,
send layoutreturn.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

And if we are to return the same type of layouts, don't bother
sending more layoutgets.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

It marks all matching layout segments as NFS_LSEG_LAYOUTRETURN,
which is an indicator for pnfs_put_lseg() to send layoutreturn,
and also prevents pnfs_update_layout() from using the returning
segments. Once it is set, it never gets cleared.

It also sets proper io failure bit so that pnfs path can be retried
after PNFS_LAYOUTGET_RETRY_TIMEOUT second.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

It allows to specify different iomode to return.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

So that it is possible to return a specific iomode layouts.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

Flexfiles layout would want to use them to report DS IO status.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

Per RFC 5661 Errata 3208:
| A client MAY always forget its layout state and associated
| layout stateid at any time (See also section 12.5.5.1).
| In such case, the client MUST use a non-layout stateid for the next
| LAYOUTGET operation. This will signal the server that the client has
| no more layouts on the file and its respective layout state can be
| released before issuing a new layout in response to LAYOUTGET.

In order to make such a signal unique to server, client needs to serialize
all layoutgets using non-layout stateid. We implement this by serializing
layoutgets when client has no layout segments at hand.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

flexfiles needs to start layoutcommit when necessary
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>

lockd assumes hostname exists otherwise kernel oops.
It can be reproduced by following steps:
1. mount flexfile MDS
2. write some files
3. mount DS via nfsv3

BUG: unable to handle kernel NULL pointer dereference at           (null)
 IP: [<ffffffff8134f332>] strlen+0x2/0x20
 PGD 0
 Oops: 0000 [#1] SMP
 Modules linked in: nfsd(F) nfs_layout_flexfiles(F) rpcsec_gss_krb5(F) auth_rpcgss(F) nfsv4(F) dns_resolver(F) nfsv3(F) nfs_acl(F) nfs(F) lockd(F) sunrpc(F) fscache(F) ebtable_nat(F) nf_conntrack_netbios_ns(F) nf_conntrack_broadcast(F) ipt_MASQUERADE(F) ip6table_nat(F) nf_nat_ipv6(F) ip6table_mangle(F) ip6t_REJECT(F) nf_conntrack_ipv6(F) nf_defrag_ipv6(F) iptable_nat(F) nf_nat_ipv4(F) nf_nat(F) iptable_mangle(F) nf_conntrack_ipv4(F) nf_defrag_ipv4(F) xt_conntrack(F) nf_conntrack(F) ebtable_filter(F) ebtables(F) ip6table_filter(F) ip6_tables(F) bnep(F) snd_ens1371(F) snd_rawmidi(F) snd_ac97_codec(F) btusb(F) ac97_bus(F) snd_seq(F) snd_seq_device(F) snd_pcm(F) ppdev(F) bluetooth(F) 6lowpan_iphc(F) rfkill(F) vmw_balloon(F) snd_timer(F) snd(F) soundcore(F) gameport(F) i2c_piix4(F) e1000(F) vmw_vmci(F) parport_pc(F) parport(F) shpchp(F) uinput(F) xfs(F) libcrc32c(F) vmwgfx(F) ttm(F) drm(F) mptspi(F) scsi_transport_spi(F) mptscsih(F) mptbase(F) i2c_core(F)
 CPU: 0 PID: 10397 Comm: mount.nfs Tainted: GF            3.14.7-100.pd_client.001.fc16.x86_64 #1
 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013
 task: ffff880008942600 ti: ffff880007990000 task.ti: ffff880007990000
 RIP: 0010:[<ffffffff8134f332>]  [<ffffffff8134f332>] strlen+0x2/0x20
 RSP: 0018:ffff880007991aa0  EFLAGS: 00010246
 RAX: 0000000000000000 RBX: ffff880038d39c20 RCX: 0000000000000004
 RDX: 0000000000000006 RSI: 0000000000000010 RDI: 0000000000000000
 RBP: ffff880007991b38 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000014600 R11: 0000000000000400 R12: ffffffff81cc8580
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000004
 FS:  00007f90cd2ef880(0000) GS:ffff88003f600000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 0000000001710000 CR4: 00000000001407f0
 Stack:
  ffffffffa045f52c ffff880001782230 ffff880004141e28 0006880007991ac8
  ffffffff816dc14b ffff880000000000 ffff880038d39c20 0000000000000010
  0000000481cc0006 0000000000000000 ffffffffa0410be8 000000000000c014
 Call Trace:
  [<ffffffffa045f52c>] ? nlmclnt_lookup_host+0x4c/0x2c0 [lockd]
  [<ffffffff816dc14b>] ? _raw_spin_unlock_bh+0x1b/0x20
  [<ffffffffa0410be8>] ? svc_destroy+0xb8/0x140 [sunrpc]
  [<ffffffffa045c323>] nlmclnt_init+0x53/0xc0 [lockd]
  [<ffffffffa047d2dc>] ? nfs_get_client+0x1cc/0x340 [nfs]
  [<ffffffffa047c2e7>] nfs_start_lockd+0xa7/0xd0 [nfs]
  [<ffffffffa047df71>] nfs_create_server+0x181/0x5c0 [nfs]
  [<ffffffffa04460f3>] nfs3_create_server+0x13/0x30 [nfsv3]
  [<ffffffffa048a0bc>] nfs_try_mount+0x21c/0x300 [nfs]
  [<ffffffff811ca32d>] ? __kmalloc_track_caller+0x1ad/0x240
  [<ffffffffa048b677>] ? nfs_fs_mount+0xc37/0xd80 [nfs]
  [<ffffffffa048ad05>] nfs_fs_mount+0x2c5/0xd80 [nfs]
  [<ffffffffa048a830>] ? nfs_clone_super+0x140/0x140 [nfs]
  [<ffffffffa048a240>] ? nfs_clone_sb_security+0x40/0x40 [nfs]
  [<ffffffff811e7e43>] mount_fs+0x43/0x1b0
  [<ffffffff81193100>] ? __alloc_percpu+0x10/0x20
  [<ffffffff812026e6>] vfs_kern_mount+0x76/0x120
  [<ffffffff81204917>] do_mount+0x237/0xa80
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Add a call to tally stats for a task under a different statsidx than
what's contained in the task structure.

This is needed to properly account for pnfs reads/writes when the
DS nfs version != the MDS version.
Signed-off-by: NWeston Andros Adamson <dros@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

Enable pNFS callbacks to allow flex files to work correctly with a
NFSv3-enabled data server.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

so that flexfile layout client can pass in DS credential instead of
using user cred, which will be done in the next patch.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

flexclient needs this as there is no nfs_server to DS connection.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

pnfs flexfile layout client may want to use NFSv3 ops rather
than the default MDS v4 ops.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

Signed-off-by: NTom Haynes <loghyr@primarydata.com>

Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

flexfile layout may need to set such when making DS connections.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

The flexfiles layout wants to create DS connection over NFSv3.
Add nfs3_set_ds_client to allow that to happen.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

They can be reused by flexfile layout as well.

Also add a code such that if read fails on one DS and
there are other DSes available to use, don't resend
through MDS but through pNFS so that client can read
from other DSes.
Reviewed-by: NJeff Layton <jlayton@primarydata.com>
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

flexfile layout may use different auth flavor as specified by MDS.
Reviewed-by: NJeff Layton <jlayton@primarydata.com>
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

It can be reused by flexfiles layout client.
Reviewed-by: NJeff Layton <jlayton@primarydata.com>
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

It can be reused by flexfile layout.
Reviewed-by: NJeff Layton <jlayton@primarydata.com>
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>

Also pull nfs4_pnfs_ds_addr and nfs4_pnfs_ds to generic pnfs.

They can all be reused by flexfile layout as well.
Reviewed-by: NJeff Layton <jlayton@primarydata.com>
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NTom Haynes <Thomas.Haynes@primarydata.com>