提交 · 15b52f10ec6131e1aff49e7823a67732cdc066a0 · openeuler / raspberrypi-kernel

25 1月, 2012 1 次提交
- M
  ASoC: Convert the WM5100 revision A updates to a regmap patch · 15b52f10
  由 Mark Brown 提交于 1月 21, 2012
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  15b52f10
24 1月, 2012 2 次提交
- M
  ASoC: wm5100: Fix mismerge of IRQ frees · e8770dd8
  由 Mark Brown 提交于 1月 24, 2012
```
We only want them at the device level, not at the CODEC level.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  e8770dd8
- M
  ASoC: Convert WM8731 to direct regmap API usage · 05d448e2
  由 Mark Brown 提交于 11月 21, 2011
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  05d448e2
23 1月, 2012 3 次提交

ASoC: Add __devinit/__devexit annotations at necessary places · 5091f5b7

由 Axel Lin 提交于 1月 23, 2012

Fix below build warning when CONFIG_HOTPLUG is not set.

  CC      sound/soc/codecs/alc5623.o
sound/soc/codecs/alc5623.c:1062: warning: ‘alc5623_i2c_remove’ defined but not used
  CC      sound/soc/codecs/alc5632.o
sound/soc/codecs/alc5632.c:1112: warning: ‘alc5632_i2c_remove’ defined but not used
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NLeon Romanovsky <leon@leon.nu>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

5091f5b7

ASoC: sgtl5000: It's sgtl5000 not sgtl500 · 5e0ac527

由 Mark Brown 提交于 1月 23, 2012

Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

5e0ac527

ASoC: sgtl5000: Convert to table based DAPM and control init · 89989637

由 Fabio Estevam 提交于 1月 22, 2012

Convert to table based DAPM and control init.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

89989637

22 1月, 2012 8 次提交
- M
  ASoC: wm8988: Convert to devm_kzalloc() · 82fa3670
  由 Mark Brown 提交于 1月 21, 2012
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  82fa3670
- M
  ASoC: wm8988: Convert to table based DAPM and control init · dd21353f
  由 Mark Brown 提交于 1月 21, 2012
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  dd21353f
- M
  ASoC: wm8985: Convert to direct regmap API usage · 411a3450
  由 Mark Brown 提交于 1月 21, 2012
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  411a3450
- M
  ASoC: wm8985 Don't directly reference the cache data structure · 9f8cbae4
  由 Mark Brown 提交于 1月 21, 2012
```
In preparation for conversion to regmap.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  9f8cbae4
- M
  ASoC: wm8985: Use standard cache sync implementation · 8b71d441
  由 Mark Brown 提交于 1月 21, 2012
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  8b71d441
- M
  ASoC: wm8985: Convert to table based DAPM and control init · eb8f7693
  由 Mark Brown 提交于 1月 21, 2012
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  eb8f7693
- M
  ASoC: wm8985: Convert to devm_kzalloc() · a1fea940
  由 Mark Brown 提交于 1月 21, 2012
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  a1fea940
- M
  ASoC: Fix build of tlv320dac33 · 3a4cbf88
  由 Mark Brown 提交于 1月 20, 2012
```
The problem was introduced due to the obscure formatting some of the
older drivers use.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
  3a4cbf88
20 1月, 2012 26 次提交

ASoC: Push WM5100 interrupt request into I2C probe · 09452f23

由 Mark Brown 提交于 1月 18, 2012

This is more what the device model wants us to do and will allow use by
non-audio functions before the audio part of the device has come up.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

09452f23

ASoC: Make WM5100 interrupt path use regmap directly · 46c1a877

由 Mark Brown 提交于 1月 18, 2012

This will allow us to move the interrupt allocation out of the ASoC part
of the driver and simplifies the locking by removing any reliance in the
bulk of the interrupt path on the big CODEC lock.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

46c1a877

ASoC: Remove redundant set_bias_level() from WM5100 remove() · 218240e2

由 Mark Brown 提交于 1月 18, 2012

The framework should bring the device down before it calls the driver.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

218240e2

ASoC: twl4030: Use core to set the msbits constraint · 8819f65c

由 Peter Ujfalusi 提交于 1月 18, 2012

Core can set the msbits constraint in behalf of the dai.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

8819f65c

ASoC: tlv320dac33: Use core to set the msbits constraint · 8d725b2b

由 Peter Ujfalusi 提交于 1月 18, 2012

Core can set the msbits constraint in behalf of the dai.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

8d725b2b

ASoC: sgtl5000: Print revision number in hex · f2c6e757

由 Fabio Estevam 提交于 1月 16, 2012

Throughout the sgtl5000 driver source code and also in the sgtl5000 datasheet
the revision code is shown in hexadecimal.

Print it hex format, for consistency.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

f2c6e757

M
ASoC: Say we can't read WM5100 ID register · 0132615d
由 Mark Brown 提交于 1月 17, 2012
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
0132615d

ASoC: When releasing WM5100 put /RESET into reset · 2688738e

由 Mark Brown 提交于 1月 17, 2012

Reset is active low, make sure we leave it asserted when release the
device.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

2688738e

M
ASoC: 24 bits are significant on wm_hubs DAIs · 99b0292d
由 Mark Brown 提交于 1月 17, 2012
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
99b0292d

ASoC: Make WM8993 I2C usage unconditional · 85f88393

由 Mark Brown 提交于 1月 17, 2012

The WM8993 only supports I2C so don't ifdef the I2C support in the driver.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

85f88393

ASoC: Implement basic WM8993 interrupt support · 164548d3

由 Mark Brown 提交于 1月 17, 2012

If an interrupt is supplied then use it for thermal warning and FLL lock
notifications. When using the interrupt raise the timeout for the FLL lock
substantially to reduce the chances of spurious warnings.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

164548d3

M
ASoC: 24 bits are significant on the WM8996 audio interfaces · a4b52337
由 Mark Brown 提交于 1月 16, 2012
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
a4b52337

ASoC: Add WM8962 DAC and ADC L/R swap support · 5f52ee48

由 Mark Brown 提交于 1月 11, 2012

Simple switches since there's no per-channel control.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

5f52ee48

ASoC: wm8983: Remove useless snd_kcontrol · d19fd5db

由 Dimitris Papastamos 提交于 1月 16, 2012

This must be a leftover from a previous driver.
Signed-off-by: NDimitris Papastamos <dp@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

d19fd5db

ASoC: Convert WM8962 register access map to modern style · cef6d1d4

由 Mark Brown 提交于 1月 11, 2012

Much more compact, both in terms of source and especially in terms of
RAM used at runtime.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

cef6d1d4

ASoC: Make WM8962 I2C usage unconditional · 291d64be

由 Mark Brown 提交于 1月 10, 2012

We only support I2C so no need to ifdef.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

291d64be

ASoC: CQ93VC: remove machine specific header file inclusion from codec driver · 2e932f29

由 Manjunath Hadli 提交于 1月 10, 2012

remove unnecessary inclusion of machine specific header
file mach/dm365.h from cq93vc.c voice codec driver
which comes in the way of platform code consolidation.
Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

2e932f29

ASoC: twl6040 - add method to query HS DC offset step size in mV · 08656910

由 Liam Girdwood 提交于 1月 09, 2012

Provide a method for mach drivers to query the HS DC offset step size in mV.
Signed-off-by: NLiam Girdwood <lrg@ti.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

08656910

M
ASoC: Optimise performance of WM8904 ADC 128fs OSR mode · 9b85fc90
由 Mark Brown 提交于 1月 07, 2012
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
9b85fc90
M
ASoC: Convert WM8955 to table based DAPM and control init · 3294c4c6
由 Mark Brown 提交于 12月 29, 2011
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
3294c4c6
M
ASoC: Convert WM8955 to direct regmap API usage · 95860fdf
由 Mark Brown 提交于 12月 29, 2011
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
95860fdf
M
ASoC: Use standard register cache sync for WM8955 · 9887cb9e
由 Mark Brown 提交于 12月 29, 2011
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
9887cb9e
M
ASoC: Convert WM8955 to devm_kzalloc() · ba5c88d0
由 Mark Brown 提交于 12月 29, 2011
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
ba5c88d0
M
ASoC: Make I2C usage unconditional in WM8955 · 1e9c898d
由 Mark Brown 提交于 12月 29, 2011
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
1e9c898d
M
ASoC: Convert WM8940 to devm_kzalloc() · 42dad0d8
由 Mark Brown 提交于 12月 29, 2011
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
42dad0d8
M
ASoC: Make I2C usage unconditional in WM8940 · b5531205
由 Mark Brown 提交于 12月 29, 2011
```
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
```
b5531205