- 02 9月, 2005 17 次提交
-
-
由 Nathan Scott 提交于
SGI-PV: 907752 SGI-Modid: xfs-linux:xfs-kern:23163a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
there.. SGI-PV: 939444 SGI-Modid: xfs-linux:xfs-kern:23162a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Tim Shimmin 提交于
SGI-PV: 931456 SGI-Modid: xfs-linux:xfs-kern:23155a Signed-off-by: NTim Shimmin <tes@sgi.com> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Tim Shimmin 提交于
include all the components which make up the transaction in the ondisk log. Having this incomplete has shown up as problems on IRIX when some v2 log changes went in. The symptom was the msg of "xfs_log_write: reservation ran out. Need to up reservation" and was seen on synchronous writes on files with lots of holes (and therefore lots of extents). SGI-PV: 931457 SGI-Modid: xfs-linux:xfs-kern:23095a Signed-off-by: NTim Shimmin <tes@sgi.com> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
writes. SGI-PV: 938145 SGI-Modid: xfs-linux:xfs-kern:23088a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Eric Sandeen 提交于
SGI-PV: 938905 SGI-Modid: xfs-linux:xfs-kern:195240a Signed-off-by: NEric Sandeen <sandeen@sgi.com> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 David Chinner 提交于
are getting ENOSPC errors on writes. When we fail to allocate space for indirect blocks in xfs_bmapi() make sure we release the direct block allocation before returning. SGI-PV: 938502 SGI-Modid: xfs-linux:xfs-kern:22986a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
SGI-PV: 938410 SGI-Modid: xfs-linux:xfs-kern:22966a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
handlers. SGI-PV: 938409 SGI-Modid: xfs-linux:xfs-kern:22965a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Christoph Hellwig 提交于
SGI-PV: 938306 SGI-Modid: xfs-linux:xfs-kern:194627a Signed-off-by: NChristoph Hellwig <hch@sgi.com> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Dean Roehrich 提交于
SGI-PV: 935317 SGI-Modid: xfs-linux:xfs-kern:192007a Signed-off-by: NDean Roehrich <roehrich@sgi.com> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Dean Roehrich 提交于
SGI-PV: 933765 SGI-Modid: xfs-linux:xfs-kern:190760a Signed-off-by: NDean Roehrich <roehrich@sgi.com> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Dean Roehrich 提交于
SGI-PV: 933551 SGI-Modid: xfs-linux:xfs-kern:190625a Signed-off-by: NDean Roehrich <roehrich@sgi.com> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Kumar Gala 提交于
We run into problems if we blindly enable L2 prefetching without checking that the L2 cache is actually enabled. Additionaly, if we disable the L2 cache we need to ensure that we disable L2 prefetching. Signed-off-by: NKumar Gala <kumar.gala@freescale.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benjamin Herrenschmidt 提交于
This fixes a problem with pci_map_rom() which doesn't properly update the ROM BAR value with the address thas allocated for it by the PCI code. This problem, among other, breaks boot on Mac laptops. It'ss a new version based on Linus latest one with better error checking. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Gibson 提交于
In adjusting the logic for SLB miss for the dynamic hugepage stuff, I messed up the !CONFIG_HUGETLB_PAGE case, failing to set the SLB flags properly. This fixes it. It also streamlines the logic for the HUGETLB_PAGE case (removing a couple of branches) while we're at it. Booted, and roughly tested on POWER5 (with and without HUGETLB_PAGE), iSeries/RS64 (no hugepage available), and G5 (with and without HUGETLB_PAGE). Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
This fixes the following compile error: ... LD .tmp_vmlinux1 drivers/built-in.o: In function `frontend_init': budget-av.c:(.text+0xb9448): undefined reference to `tda10046_attach' budget-av.c:(.text+0xb9518): undefined reference to `tda10021_attach' drivers/built-in.o: In function `philips_tu1216_request_firmware': budget-av.c:(.text+0xb937b): undefined reference to `request_firmware' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NJohannes Stezenbach <js@linuxtv.org> Acked-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 31 8月, 2005 4 次提交
-
-
由 Linus Torvalds 提交于
-
由 Marcelo Tosatti 提交于
The following patch fixes two warnings in arch/ppc/syslib/m8xx_setup.c Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ivan Kokshaysky 提交于
I had some time to think about PCI assign issues in 2.6.13-rc series. The major problem here is that we call pci_assign_unassigned_resources() way too early - at subsys_initcall level. Therefore we give no chances to ACPI and PnP routines (called at fs_initcall level) to reserve their respective resources properly, as the comments in drivers/pnp/system.c and drivers/acpi/motherboard.c suggest: /** * Reserve motherboard resources after PCI claim BARs, * but before PCI assign resources for uninitialized PCI devices */ So I moved the pci_assign_unassigned_resources() call to pcibios_assign_resources() (fs_initcall), which should hopefully fix a lot of problems and make PCIBIOS_MIN_IO tweaks unnecessary. Other changes: - remove resource assignment code from pcibios_assign_resources(), since it duplicates pci_assign_unassigned_resources() functionality and actually does nothing in 2.6.13; - modify ROM assignment code as per Ben's suggestion: try to use firmware settings by default (if PCI_ASSIGN_ROMS is not set); - set CARDBUS_IO_SIZE back to 4K as it's a wonderful stress test for various setups. Confirmed by Tero Roponen <teanropo@cc.jyu.fi> (who had problems with the 4kB CardBus IO size previously). Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Garzik 提交于
-
- 30 8月, 2005 19 次提交
-
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Clemens Ladisch 提交于
USB generic driver When a USB error occurs that might indicate that the device has been unplugged, don't resubmit the URB immediately to prevent flooding the log with error messages before khubd has us disconnect()ed. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Takashi Iwai 提交于
Add register_sound_special_device() function to allow assignment of device pointer to a specific OSS device for HAL. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jaroslav Kysela 提交于
-
由 Lee Revell 提交于
EMU10K1/EMU10K2 driver Add identification for Live 5.1 [SB0220] Signed-off-by: NLee Revell <rlrevell@joe-job.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
EMU10K1/EMU10K2 driver Added the missing ac97 support on SBLive! Player 5.1. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Intel8x0 driver Added ac97_quirk for FSC 4010. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
PCM Midlevel Fixed zero-division bug in PCM 32bit compat layer. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Daniel Horchner 提交于
Intel8x0 driver Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Clemens Ladisch 提交于
USB generic driver Emagic devices pad their packets not with 0xff bytes but with a 0xff byte followed by garbage, so we have to stop at the first such byte. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Takashi Iwai 提交于
au88x0 driver,Common EMU synth Fixed missing spin_unlock. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Bunk 提交于
GUS Library 'extern inline' doesn't make much sense. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Intel driver Fix and clean up for the support of ULI M5461 - set CORB/RIRB sizes explicitly - add workarounds for ULI on ia32 - max number of streams depends on the chip type now - increase the size of BDL Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
HDA Codec driver Added the missing beep support for Uniwill laptop (ALSA bug#1358). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Digigram VX Pocket driver Add snd_card_set_dev() to register the device pointer. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Digigram VX Pocket driver Fixed the wrong index number assignment. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Digigram VX Pocket driver Added the missing event callback. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-