I've modified about half the code in include/asm-generic now, and
people start sending me patches for it, so I should probably take
the formal responsibility for it.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Architechtures normally don't need to set a HARDIRQ_BITS
unless they have hardcoded a specific value in assembly.
This drops the definition from asm-generic/hardirq.h, which
results in linux/hardirq.h setting its default of 10.

Both the old default of 8 and the linux/hardirq.h default
of 10 are sufficient because they only limit the number
of nested hardirqs, and we normally run out of stack space
much earlier than exceeding 256 or even 1024 nested interrupts.
Reported-by: NMike Frysinger <vapier@gentoo.org>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

There's no reason that I can see to use the short __access_ok() form
directly when the access_ok() is clearer in intent and for most people,
expands to the same C code (i.e. always specify the first field -- access
type).  Not all no-mmu systems lack memory protection, so the read/write
could feasibly be checked.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

The strnlen_user() function was missing a access_ok() check on the pointer
given.  We've had cases on Blackfin systems where test programs caused
kernel crashes here because userspace passed up a NULL/-1 pointer and the
kernel gladly attempted to run strlen() on it.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  jbd2: clean up jbd2_journal_try_to_free_buffers()
  ext4: Don't update ctime for non-extent-mapped inodes
  ext4: Fix up whitespace issues in fs/ext4/inode.c
  ext4: Fix 64-bit block type problem on 32-bit platforms
  ext4: teach the inode allocator to use a goal inode number
  ext4: Use a hash of the topdir directory name for the Orlov parent group
  ext4: document the "abort" mount option
  ext4: move the abort flag from s_mount_opts to s_mount_flags
  ext4: update the s_last_mounted field in the superblock
  ext4: change s_mount_opt to be an unsigned int
  ext4: online defrag -- Add EXT4_IOC_MOVE_EXT ioctl
  ext4: avoid unnecessary spinlock in critical POSIX ACL path
  ext3: avoid unnecessary spinlock in critical POSIX ACL path
  ext4: convert instrumentation from markers to tracepoints
  jbd2: convert instrumentation from markers to tracepoints

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (56 commits)
  sh: Fix declaration of __kernel_sigreturn and __kernel_rt_sigreturn
  sh: Enable soc-camera in ap325rxa/migor/se7724 defconfigs.
  sh: remove stray markers.
  sh: defconfig updates.
  sh: pci: Initial PCI-Express support for SH7786 Urquell board.
  sh: Generic HAVE_PERF_COUNTER support.
  SH: convert migor to soc-camera as platform-device
  SH: convert ap325rxa to soc-camera as platform-device
  soc-camera: unify i2c camera device platform data
  sh: add platform data for r8a66597-hcd in setup-sh7723
  sh: add platform data for r8a66597-hcd in setup-sh7366
  sh: x3proto: add platform data for r8a66597-hcd
  sh: highlander: add platform data for r8a66597-hcd
  sh: sh7785lcr: add platform data for r8a66597-hcd
  sh: turn off irqs when disabling CMT/TMU timers
  sh: use kzalloc() for cpg clocks
  sh: unbreak WARN_ON()
  sh: Use generic atomic64_t implementation.
  sh: Revised clock function in highlander
  sh: Update r7780mp defconfig
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (55 commits)
  netxen: fix tx ring accounting
  netxen: fix detection of cut-thru firmware mode
  forcedeth: fix dma api mismatches
  atm: sk_wmem_alloc initial value is one
  net: correct off-by-one write allocations reports
  via-velocity : fix no link detection on boot
  Net / e100: Fix suspend of devices that cannot be power managed
  TI DaVinci EMAC : Fix rmmod error
  net: group address list and its count
  ipv4: Fix fib_trie rebalancing, part 2
  pkt_sched: Update drops stats in act_police
  sky2: version 1.23
  sky2: add GRO support
  sky2: skb recycling
  sky2: reduce default transmit ring
  sky2: receive counter update
  sky2: fix shutdown synchronization
  sky2: PCI irq issues
  sky2: more receive shutdown
  sky2: turn off pause during shutdown
  ...

Manually fix trivial conflict in net/core/skbuff.c due to kmemcheck

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] hpwdt: Add NMI sourcing
  [WATCHDOG] iTCO_wdt: Fix ICH7+ reboot issue.
  [WATCHDOG] iTCO_wdt: fix memory corruption when RCBA is disabled by hardware
  [WATCHDOG] Correct WDIOF_MAGICCLOSE flag
  [WATCHDOG] move platform probe and remove function to devinit and devexit
  [WATCHDOG] Some more general cleanup
  [WATCHDOG] iTCO_wdt: Cleanup code

The page allocator also needs the masking of gfp flags during boot,
so this moves it out of slab/slub and uses it with the page allocator
as well.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://neil.brown.name/md: (39 commits)
  md/raid5: correctly update sync_completed when we reach max_resync
  md/raid5: add missing call to schedule() after prepare_to_wait()
  md/linear: use call_rcu to free obsolete 'conf' structures.
  md linear: Protecting mddev with rcu locks to avoid races
  md: Move check for bitmap presence to personality code.
  md: remove chunksize rounding from common code.
  md: raid0/linear: ensure device sizes are rounded to chunk size.
  md: move assignment of ->utime so that it never gets skipped.
  md: Push down reconstruction log message to personality code.
  md: merge reconfig and check_reshape methods.
  md: remove unnecessary arguments from ->reconfig method.
  md: raid5: check stripe cache is large enough in start_reshape
  md: raid0: chunk_sectors cleanups.
  md: fix some comments.
  md/raid5: Use is_power_of_2() in raid5_reconfig()/raid6_reconfig().
  md: convert conf->chunk_size and conf->prev_chunk to sectors.
  md: Convert mddev->new_chunk to sectors.
  md: Make mddev->chunk_size sector-based.
  md: raid0 :Enables chunk size other than powers of 2.
  md: prepare for non-power-of-two chunk sizes
  ...

Add support for new relocs which may show up in MN10300 kernel modules due to
linker relaxation.
Signed-off-by: NMark Salter <msalter@redhat.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds lib/gcd.c which contains a greatest common divider
implementation taken from sound/core/pcm_timer.c

Several usages of this new library function will be sent to subsystem
maintainers.

[akpm@linux-foundation.org: use swap() (pointed out by Joe)]
[akpm@linux-foundation.org: just add gcd.o to obj-y, remove Kconfig changes]
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Simon Horman <horms@verge.net.au>
Cc: Julius Volz <juliusv@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds the kernel side of the PPS support currently named
"LinuxPPS".

PPS means "pulse per second" and a PPS source is just a device which
provides a high precision signal each second so that an application can
use it to adjust system clock time.

Common use is the combination of the NTPD as userland program with a GPS
receiver as PPS source to obtain a wallclock-time with sub-millisecond
synchronisation to UTC.

To obtain this goal the userland programs shoud use the PPS API
specification (RFC 2783 - Pulse-Per-Second API for UNIX-like Operating
Systems, Version 1.0) which in part is implemented by this patch.  It
provides a set of chars devices, one per PPS source, which can be used to
get the time signal.  The RFC's functions can be implemented by accessing
to these char devices.
Signed-off-by: NRodolfo Giometti <giometti@linux.it>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg KH <greg@kroah.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the copyright statements in a couple of GRU files.  No functional
changes are being made.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Delete references to the SGI GRU GSH hardware resources.  These GRU
resources have been deleted from the hardware.  (These resources have
never benn used, anyway).
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Minor fixes to the SGI GRU grudump facility:
	- fix address where user data is written
	- add gru number to data passed to user
	- indicate if context is locked
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix potential SGI GRU bug that could cause a use-after-free.  If one
thread in a task is flushing the GRU and another thread destroys the GRU
context, there is the potential to access a table after it has been freed.

Copy the gms pointer to a local variable before unlocking the gts table.
Note that no refcnt is needed for the gms - the reference is held
indirectly by the task's mm_struct.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a user request to specify the gru instruction slice parameter for user
contexts.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change the user GRU request for specifying the "task_slice" option to use
a generic infrastructure that can be expanded in the future to include
additional context options.  No new capabilities are added with this
patch.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Cleanup of GRU inline functions to eliminate unnecessary inline code.
Update function descriptions.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Delete the user request for fetching the status of a GRU chiplet.  This
request has been made obsolete by other changes.  Note: this is not a
change to a user API - there are no compatibility issues with this change.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Collect GRU statistics for each user GRU context.  Statistics are kept for
TLB misses & content resource contention.  Add user request for retrieving
the statistics.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix bug in automatic retry of GRU instruction failures.  CBR substatus
(message queue failure) was being checked incorrectly.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add user function to explicitly unload GRU kernel contexts from the GRU.
Only contexts that are not in-use will be unloaded.

This function is primarily for testing.  It is not expected that this will
be used in normal production systems.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix two problems related to GRU instruction failures.  Cache coherency is
not maintained for CBEs except when loading or unloading contexts.  When
reading a CBE to extract error information, the CBE must first be flushed
from the cache.

The function that reads kerrnel CBEs was reading the wrong CBE.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update GRU driver to the latest version of the GRU spec. This consists
of minor updates:
	- changes & additions to error status bits
	- new restriction on handling of TLB misses while in FMM mode
	- new field (not used by software) in TFH
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change the kernel self tests that can be optionally executed on GRU
initialization.  This is primarily for testing.

Eliminate the BUG statements on failure and return bad status.  Add ioctl
interface to execute the tests on demand.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for asynchronous GRU instructions.  Currently, asynchronous
instructions are supported only for GRU instructions issued by the kernel.

[akpm@linux-foundation.org: build fix]
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for interrupts generated by GRU instruction completion.
Previously, the only interrupts were for TLB misses.  The hardware also
supports interrupts on instruction completion.  This will be supported for
instructions issued by the kernel.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Check whether the gru state being loaded into a gru is from a new context
or a previously unloaded context.  If new, simply zero out the hardware
context; if unloaded and valid, reload the old state.

This change is primarily for reloading kernel contexts where the previous
is not required to be saved.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix endcase in handling GRU message queue failures due to NACKs of PUT
requests.  Must ensure that the "present" bits are cleared before
resending the message.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Support alocation of GRU contexts that contain zero DSR or CBR resources.
Some instructions do not require DSR resources.  Contexts without CBR
resources are useful for diagnostics.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change the way GRU resources are assigned for kernel threads.  GRU
contexts for kernel threads are now allocated on demand and can be stolen
by user processes when idle.  This allows MPI jobs to use ALL of the GRU
resources when the kernel is not using them.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change the interface to cch_allocate so that it can be used to allocate
GRU contexts for kernel threads.  Kernel threads use the GRU in unmapped
mode and do not require ASIDs for the GRU TLB.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove "static" from the functions for loading/unloading GRU contexts.
These functions will be called from other GRU files.  Fix bug in unlocking
gru context.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change the interface to gru_alloc_gts() so that it can be used to allocate
GRU contexts for kernel threads.  Kernel threads do not have vdata
structures for the GRU contexts.  The GRU resource count are now passed
explicitly instead of inside the vdata structure.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for dumpping the state of an entire GRU chiplet.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Bug fixes for GRU exception handling.  Additional fields from the CBR must
be returned to the user to allow the user to correctly diagnose GRU
exceptions.

Handle endcase in TFH TLB miss handling.  Verify that TFH actually
indicates a pending exception.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently the sysrq-c handler is bit over-engineered.  Its behavior is
dependent on a few compile time and run time factors that alter its
behavior which is really unnecessecary.

If CONFIG_KEXEC is not configured, sysrq-c, crashes the system with a NULL
pointer dereference.  If CONFIG_KEXEC is configured, it calls crash_kexec
directly, which implies that the kexec kernel will either be booted (if
its been previously loaded), or it will simply do nothing (the no kexec
kernel has been loaded).

It would be much easier to just simplify the whole thing to dereference a
NULL pointer all the time regardless of configuration.  That way, it will
always try to crash the system, and if a kexec kernel has been loaded into
reserved space, it will still boot from the page fault trap handler
(assuming panic_on_oops is set appropriately).

[akpm@linux-foundation.org: build fix]
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Cc: Brayan Arraes <brayan@yack.com.br>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On embedded devices, sleep mode conditions can be tricky to handle,
Especially when processors tend to pull-down the w1 bus during sleep.  Bus
slaves (such as the ds2760) may interpret this as a reason for power-down
conditions and entirely switch off the device.

This patch adds a callback function pointer to let users switch on and off
the external pull-up resistor.  This lets the outside world know whether
the processor is currently actively driving the bus or not.

When this callback is not provided, the code behaviour won't change.
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Acked-by: NVille Syrjala <syrjala@sci.fi>
Acked-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>