- 25 5月, 2007 25 次提交
-
-
由 David S. Miller 提交于
The current IPSEC rule resolution behavior we have does not work for a lot of people, even though technically it's an improvement from the -EAGAIN buisness we had before. Right now we'll block until the key manager resolves the route. That works for simple cases, but many folks would rather packets get silently dropped until the key manager resolves the IPSEC rules. We can't tell these folks to "set the socket non-blocking" because they don't have control over the non-block setting of things like the sockets used to resolve DNS deep inside of the resolver libraries in libc. With that in mind I coded up the patch below with some help from Herbert Xu which provides packet-drop behavior during larval state resolution, controllable via sysctl and off by default. This lays the framework to either: 1) Make this default at some point or... 2) Move this logic into xfrm{4,6}_policy.c and implement the ARP-like resolution queue we've all been dreaming of. The idea would be to queue packets to the policy, then once the larval state is resolved by the key manager we re-resolve the route and push the packets out. The packets would timeout if the rule didn't get resolved in a certain amount of time. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasily Averin 提交于
sys_setsockopt() do not check properly timeout values for SO_RCVTIMEO/SO_SNDTIMEO, for example it's possible to set negative timeout values. POSIX do not defines behaviour for sys_setsockopt in case negative timeouts, but requires that setsockopt() shall fail with -EDOM if the send and receive timeout values are too big to fit into the timeout fields in the socket structure. In current implementation negative timeout can lead to error messages like "schedule_timeout: wrong timeout value". Proposed patch: - checks tv_usec and returns -EDOM if it is wrong - do not allows to set negative timeout values (sets 0 instead) and outputs ratelimited information message about such attempts. Signed-off-By: NVasily Averin <vvs@sw.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jing Min Zhao 提交于
They're the same. Signed-off-by: NJing Min Zhao <zhaojingmin@vivecode.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jing Min Zhao 提交于
Add missing process of T.120 address in OpenLogicalChannelAck signal. Signed-off-by: NJing Min Zhao <zhaojingmin@vivecode.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jing Min Zhao 提交于
According to the implementation of H.323, it's not necessary to check the addresses in Information signals. Signed-off-by: NJing Min Zhao <zhaojingmin@vivecode.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jing Min Zhao 提交于
Update get_h225_addr() to meet the changes in ASN.1 types. It was using field ip6 to access IPv6 TransportAddress, it should be ip according the ASN.1 definition. Signed-off-by: NJing Min Zhao <zhaojingmin@vivecode.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jing Min Zhao 提交于
1. Add support for decoding IPv6 address. I know it was manually added in the header file, but not in the template file. That wouldn't work. 2. Add missing support for decoding T.120 address in OLCA. 3. Remove unnecessary decoding of Information signal. Signed-off-by: NJing Min Zhao <zhaojingmin@vivecode.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
When the packet size is changed by the FTP NAT helper, the connection tracking helper adjusts the sequence number of the newline character by the size difference. This is wrong because NAT sequence number adjustment happens after helpers are called, so the unadjusted number is compared to the already adjusted one. Based on report by YU, Haitao <yuhaitao@tsinghua.org.cn> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
When trying to locate the oldest entry in the history of newline character sequence numbers, the sequence number of the current entry is incorrectly compared with the index of the oldest sequence number instead of the number itself. Additionally it is not made sure that the current sequence number really is after the oldest known one. Based on report by YU, Haitao <yuhaitao@tsinghua.org.cn> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
The event cache time must be an absolute value, when no event exists it is incorrectly set to 1s instead of 1s in the future. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
Signed-off-by: NJon Paul Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Milan Kocian 提交于
When you replace route via ip r r command the netlink multicast message is not send. This patch corrects it. NL message is sent with NLM_F_REPLACE flag. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=8320Signed-off-by: NMilan Kocian <milon@wq.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Acked-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matthias Kaehlcke 提交于
Use mutex instead of binary semaphore in idt77252 driver. Signed-off-by: NMatthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Oliver Hartkopp 提交于
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: NUrs Thuermann <urs@isnogud.escape.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
My previous patch that changed the return value of qdisc_restart incorrectly made the case where dequeue returns empty continue processing packets. This patch is based on diagnosis and fix by Patrick McHardy. Reported-and-debugged-by: NAnant Nitya <kernel@prachanda.info> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.linux-nfs.org/pub/linux/nfs-2.6由 Linus Torvalds 提交于
* 'fixes' of git://git.linux-nfs.org/pub/linux/nfs-2.6: NFS: Fix nfs_direct_dirty_pages() NFS: Fix handful of compiler warnings in direct.c NFS: Avoid a deadlock situation on write
-
- 24 5月, 2007 15 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit 722385f7 (or commit 3f271008, it's your choice ;), since the same patch to Documentation/HOWTO got added twice because it just kept applying cleanly. Noted by Qi Yong. Cc: Qi Yong <qiyong@fc-cn.com> Acked-by: NDiego Calleja <diegocg@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] geode: Fix in-place operations and set key
-
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: mmc: add maintainer for ARM Primecell controller mmc: add maintainer for iMX MMC interface mmc: Add maintainers for TI OMAP MMC interface mmc: mark unmaintained drivers mmc: clean up unused parts of block driver
-
由 Linus Torvalds 提交于
With irqpoll enabled, trying to test the IRQF_IRQPOLL flag in the actions would cause a NULL pointer dereference if no action was installed (for example, the driver might have been unloaded with interrupts still pending). So be a bit more careful about testing the flag by making sure to test for that case. (The actual _change_ is trivial, the patch is more than a one-liner because I rewrote the testing to also be much more readable. Original (discarded) bugfix by Bernhard Walle. Cc: Bernhard Walle <bwalle@suse.de> Tested-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Trond Myklebust 提交于
We only need to dirty the pages that were actually read in. Also convert nfs_direct_dirty_pages() to call set_page_dirty() instead of set_page_dirty_lock(). A call to lock_page() is unacceptable in an rpciod callback function. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
This patch fixes a couple of signage issues that were causing an Oops when running the LTP diotest4 test. get_user_pages() returns a signed error, hence we need to be careful when comparing with the unsigned number of pages from data->npages. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
When processes are allowed to attempt to lock a non-contiguous range of nfs write requests, it is possible for generic_writepages to 'wrap round' the address space, and call writepage() on a request that is already locked by the same process. We avoid the deadlock by checking if the page index is contiguous with the list of nfs write requests that is already held in our nfs_pageio_descriptor prior to attempting to lock a new request. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Marcel Holtmann 提交于
The L2CAP configuration parameter handling was missing the support for rejecting unknown options. The capability to reject unknown options is mandatory since the Bluetooth 1.2 specification. This patch implements its and also simplifies the parameter parsing. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
In case of Broadcom based Bluetooth devices, it is safe to always send HCI_Reset as first command. This gives the advantage that all HID Proxy versions will automatically work and don't need any additional quirks anymore. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Jordan Crouse 提交于
Allow in-place crypto operations. Also remove the coherent user flag (we use it automagically now), and by default use the user written key rather then the HW hidden key - this makes crypto just work without any special considerations, and thats OK, since its our only usage model. Signed-off-by: NJordan Crouse <jordan.crouse@amd.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Russell King 提交于
Russell King handles this driver. Signed-off-by: NRussell King <rmk@arm.linux.org.uk> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Pavel Pisa 提交于
Pavel Pisa takes on the role of administrating this driver. Signed-off-by: NPavel Pisa <ppisa@pikron.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Syed Khasim 提交于
Carlos Aguiar and Anderson Briglia are interested in making sure the driver works for existing boards as they have access to them, and Syed Khasim can make it work for new omaps (2430, 3430). Signed-off-by: NSyed Khasim <x0khasim@ti.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Pierre Ossman 提交于
Most of the host controller drivers in the MMC layer lacks an official maintainer. Make sure this is mentioned in MAINTAINERS in case someone wants to pick up the ball. Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Pierre Ossman 提交于
Remove dead code and unused structs from the block driver. Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-