commit 181d1b9e
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sun Jul 21 13:16:24 2013 +0200

    drm/i915: fix up gt init sequence fallout

moved dev_priv->gt_lock initialization after use. Do the initialization
much earlier with other spin lock initializations.
Reported-by: NSedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Tested-by: NSedat Dilek <sedat.dilek@gmail.com>
Cc: stable@vger.kernel.org (since the regressing patch is also cc: stable)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In

commit 325b9d04
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Apr 19 11:24:33 2013 +0200

    drm/i915: fixup 12bpc hdmi dotclock handling

I've errornously claimed that we don't yet support the hdmi 1.4
dotclocks > 225 MHz on Haswell. But a bug report and a closer look at
the wrpll table showed that we've supported port clocks up to 300MHz.

With the new code to dynamically compute wrpll limits we should have
no issues going up to the full 340 MHz range of hdmi 1.4, so let's
just use that to fix this regression. That'll allow 4k over hdmi for
free!

v2: Drop the random hunk that somehow slipped in.

v3: Cantiga has the original HDMI dotclock limit of 165MHz. And also
patch up the mode filtering. To do so extract the dotclock limits into
a little helper function.

v4: Use 300MHz (from Bspec) instead of 340MHz (upper limit for hdmi
1.3), apparently hw is not required to be able to drive the highest
dotclocks. Suggested by Damien.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67048
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67030
Tested-by: Andreas Reis <andreas.reis@gmail.com> (v2)
Cc: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The regression fix for gen6+ rps fallout

commit 7dcd2677
Author: Konstantin Khlebnikov <khlebnikov@openvz.org>
Date:   Wed Jul 17 10:22:58 2013 +0400

    drm/i915: fix long-standing SNB regression in power consumption after resume

unintentionally also changed the init sequence ordering between
gt_init and gt_reset - we need to reset BIOS damage like leftover
forcewake references before we run our own code. Otherwise we can get
nasty dmesg noise like

[drm:__gen6_gt_force_wake_mt_get] *ERROR* Timed out waiting for forcewake old ack to clear.

again. Since _reset suggests that we first need to have stuff
initialized (which isn't the case here) call it sanitze instead.

While at it also block out the rps disable introduced by the above
commit on ilk: We don't have any knowledge of ilk rps being broken in
similar ways. And the disable functions uses the default hw state
which is only read out when we're enabling rps. So essentially we've
been writing random grabage into that register.
Reported-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@vger.kernel.org
Tested-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In theory, the different register blocks were meant to be only ever
touched when holding either the struct_mutex, mode_config.lock or even a
specific localised lock. This does not seem to be the case, and the
hardware reacts extremely badly if we attempt to concurrently access two
registers within the same cacheline.

The HSD suggests that we only need to do this workaround for display
range registers. However, upon review we need to serialize the multiple
stages in our register write functions - if only for preemption
protection.

Irrespective of the hardware requirements, the current io functions are
a little too loose with respect to the combination of pre- and
post-condition testing that we do in conjunction with the actual io. As
a result, we may be pre-empted and generate both false-postive and
false-negative errors.

Note well that this is a "90%" solution, there remains a few direct
users of ioread/iowrite which will be fixed up in the next few patches.
Since they are more invasive and that this simple change will prevent
almost all lockups on Haswell, we kept this patch simple to facilitate
backporting to stable.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63914Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=47941
BugLink: https://bugs.launchpad.net/bugs/1163720
BugLink: https://bugs.launchpad.net/bugs/1162026

Some machines suffer from non-functional backlight controls if
BLM_PCH_PWM_ENABLE is set, so provide a quirk to avoid doing so.
Apply this quirk to Dell XPS 13 models.
Tested-by: NEric Griffith <EGriffith92@gmail.com>
Tested-by: NKent Baxley <kent.baxley@canonical.com>
Cc: <stable@vger.kernel.org> # v3.8+
Signed-off-by: NKamal Mostafa <kamal@canonical.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

To avoid stalls we delay tiling changes and especially hold of
committing the new fence state for as long as possible.
Synchronization points are in the execbuf code and in our gtt fault
handler.

Unfortunately we've missed that tricky detail when adding proper fence
restore code in

commit 19b2dbde
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Wed Jun 12 10:15:12 2013 +0100

    drm/i915: Restore fences after resume and GPU resets

The result was that we've restored fences for objects with no tiling,
since the object<->fence link still existed after resume. Now that
wouldn't have been too bad since any subsequent access would have
fixed things up, but if we've changed from tiled to untiled real havoc
happened:

The tiling stride is stored -1 in the fence register, so a stride of 0
resulted in all 1s in the top 32bits, and so a completely bogus fence
spanning everything from the start of the object to the top of the
GTT. The tell-tale in the register dumps looks like:

                 FENCE START 2: 0x0214d001
                 FENCE END 2: 0xfffff3ff

Bit 11 isn't set since the hw doesn't store it, even when writing all
1s (at least on my snb here).

To prevent such a gaffle in the future add a sanity check for fences
with an untiled object attached in i915_gem_write_fence.

v2: Fix the WARN, spotted by Chris.

v3: Trying to reuse get_fences looked ugly and obfuscated the code.
Instead reuse update_fence and to make it really dtrt also move the
fence dirty state clearing into update_fence.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Stéphane Marchesin <marcheu@chromium.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=60530
Cc: stable@vger.kernel.org (for 3.10 only)
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: NMatthew Garrett <matthew.garrett@nebula.com>
Tested-by: NBjörn Bidar <theodorstormgrade@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

According to Matthew Garrett, "Windows 8 leaves backlight control up
to individual graphics drivers rather than making ACPI calls itself.
There's plenty of evidence to suggest that the Intel driver for
Windows [8] doesn't use the ACPI interface, including the fact that
it's broken on a bunch of machines when the OS claims to support
Windows 8.  The simplest thing to do appears to be to disable the
ACPI backlight interface on these systems".

There's a problem with that approach, however, because simply
avoiding to register the ACPI backlight interface if the firmware
calls _OSI for Windows 8 may not work in the following situations:
 (1) The ACPI backlight interface actually works on the given system
     and the i915 driver is not loaded (e.g. another graphics driver
     is used).
 (2) The ACPI backlight interface doesn't work on the given system,
     but there is a vendor platform driver that will register its
     own, equally broken, backlight interface if not prevented from
     doing so by the ACPI subsystem.
Therefore we need to allow the ACPI backlight interface to be
registered until the i915 driver is loaded which then will unregister
it if the firmware has called _OSI for Windows 8 (or will register
the ACPI video driver without backlight support if not already
present).

For this reason, introduce an alternative function for registering
ACPI video, acpi_video_register_with_quirks(), that will check
whether or not the ACPI video driver has already been registered
and whether or not the backlight Windows 8 quirk has to be applied.
If the quirk has to be applied, it will block the ACPI backlight
support and either unregister the backlight interface if the ACPI
video driver has already been registered, or register the ACPI
video driver without the backlight interface otherwise.  Make
the i915 driver use acpi_video_register_with_quirks() instead of
acpi_video_register() in i915_driver_load().

This change is based on earlier patches from Matthew Garrett,
Chun-Yi Lee and Seth Forshee and includes a fix from Aaron Lu's.

References: https://bugzilla.kernel.org/show_bug.cgi?id=51231Tested-by: NAaron Lu <aaron.lu@intel.com>
Tested-by: NIgor Gnatenko <i.gnatenko.brain@gmail.com>
Tested-by: NYves-Alexis Perez <corsac@debian.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NAaron Lu <aaron.lu@intel.com>
Acked-by: NMatthew Garrett <matthew.garrett@nebula.com>

In commit e3de42b6
Author: Imre Deak <imre.deak@intel.com>
Date:   Fri May 3 19:44:07 2013 +0200

    drm/i915: force full modeset if the connector is in DPMS OFF mode

a new function was added that walked over the set of connectors to see
if any of the currently associated CRTC was switched off. This function
walked an array of connectors, rather than the array of pointers to
connectors contained in the drm_mode_set - i.e. it was dereferencing far
past the end of the first connector. This only becomes an issue if we
attempt to use a clone mode (i.e. more than one connector per CRTC) such
that set->num_connectors > 1.
Reported-by: NTimo Aaltonen <tjaalton@ubuntu.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65927Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Egbert Eich <eich@suse.de>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

There seems to be no limit to the amount of gunk the firmware can
leave behind. Some platforms leave pch dplls on which are not in
active use at all. The example in the bug report is a Apple Macbook
Pro.

Note that this escape scrunity of the hw state checker until we've
tried to use this enabled, but unused pll since we did only check for
the inverse case of a in-used, but disabled pll.

v2: Add a WARN in the pll state checker which would have caught this
case.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66952Reported-and-tested-by: Nshui yangwei <yangweix.shui@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch fixes regression in power consumtion of sandy bridge gpu, which
exists since v3.6 Sometimes after resuming from s2ram gpu starts thinking that
it's extremely busy. After that it never reaches rc6 state.

Bug exists since kernel v3.6:

commit b4ae3f22
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Thu Jun 14 11:04:48 2012 -0700

    drm/i915: load boot context at driver init time

For some reason RC6 is already enabled at the beginning of resuming process.
Following initliaztion breaks some internal state and confuses RPS engine.
This patch disables RC6 at the beginnig of resume and initialization.

I've rearranged initialization sequence, because intel_disable_gt_powersave()
needs initialized force_wake_get/put and some locks from the dev_priv.

Note: The culprit in the initialization sequence seems to be the write
to MBCTL added in the above mentioned commit. The first version of
this patch just held a forcewake reference across the clock gating
init functions, which seems to have been enought to gather quite a few
positive test reports. But since that smelled a bit like ad-hoc
duct-tape v2 now just disables rps/rc6 across the entire hw setup.

References: https://bugs.freedesktop.org/show_bug.cgi?id=54089
References: https://bugzilla.kernel.org/show_bug.cgi?id=58971
References: https://patchwork.kernel.org/patch/2827634/ (patch v1)
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Add note about v1 vs. v2 of this patch and use standard
layout for the commit citation. Also add the tested-bys from v1 and a
cc: stable.]
Cc: stable@vger.kernel.org (Note: tiny conflict due to the addition of
the backlight lock in 3.11)
Tested-by: Alexander Kaltsas <alexkaltsas@gmail.com> (v1)
Tested-by: rocko <rockorequin@hotmail.com> (v1)
Tested-by: JohnMB <johnmbryant@sky.com> (v1)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Otherwise the DDI_A_4_LANES bit gets lost and we can't use > 2 lanes
on eDP. This fixes eDP on hsw with > 2 lanes.

Also s/port_reversal/saved_port_bits/ since the current name is
confusing.
Signed-off-by: NStéphane Marchesin <marcheu@chromium.org>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

I.e. for letter/pillarboxing. For those cases we need to adjust the
mode a bit, but Jesse gmch pfit refactoring in

commit 2dd24552
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Thu Apr 25 12:55:01 2013 -0700

    drm/i915: factor out GMCH panel fitting code and use for eDP v3

broke that by reordering the computation of the gmch pfit state with
the block of code that prepared the adjusted mode for it and told the
modeset core not to overwrite the adjusted mode with default settings.

We might want to switch around the core code to just fill in defaults,
but this code predates the pipe_config modeset rework. And in the old
crtc helpers we did not have a suitable spot to do this.

Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Hans de Bruin <jmdebruin@xmsnet.nl>
Reported-and-tested-by: NHans de Bruin <jmdebruin@xmsnet.nl>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It's in the PFIT_CONTROL register, but very much associated with the
lvds encoder. So move the readout for it (in the case of an otherwise
disabled pfit) from the pipe to the lvds encoder's get_config
function.

Otherwise we get a pipe state mismatch if we use pipe B for a non-lvds
output and we've left the dither bit enabled behind us. This can
happen if the BIOS has set the bit (some seem to unconditionally do
that, even in the complete absence of an lvds port), but not enabled
pipe B at boot-up. Then we won't clear the pfit control register since
we can only touch that if the pfit is associated with our pipe in the
crtc configuration - we could trample over the pfit state of the other
pipe otherwise since it's shared. Once pipe B is enabled we notice
that the 6to8 dither bit is set and complain about the mismatch.

Note that testing indicates that we don't actually need to set this
bit when the pfit is disabled, dithering on 18bpp panels seems to work
regardless. But ripping that code out is not something for a bugfix
meant for -rc kernels.

v2: While at it clarify the logic in i9xx_get_pfit_config, spurred by
comments from Chris on irc.

v3: Use Chris suggestion to make the control flow in
i9xx_get_pfit_config easier to understand.

v4: Kill the extra line, spotted by Chris.
Reported-by: NKnut Petersen <Knut_Petersen@t-online.de>
Cc: Knut Petersen <Knut_Petersen@t-online.de>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
References: http://lists.freedesktop.org/archives/intel-gfx/2013-July/030092.htmlTested-by: NKnut Petersen <Knut_Petersen@t-online.de>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This reverts commit 25ff1195 and the follow on for Valleyview commit 2dc8aae0.

commit 25ff1195
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Thu Apr 4 21:31:03 2013 +0100

    drm/i915: Workaround incoherence between fences and LLC across multiple CPUs

commit 2dc8aae0
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Wed May 22 17:08:06 2013 +0100

    drm/i915: Workaround incoherence with fence updates on Valleyview

Jon Bloomfield came up with a plausible explanation and cheap fix
(drm/i915: Fix incoherence with fence updates on Sandybridge+) for the
race condition, so lets run with it.

This is a candidate for stable as the old workaround incurs a
significant cost (calling wbinvd on all CPUs before performing the
register write) for some workloads as noted by Carsten Emde.

Link: http://lists.freedesktop.org/archives/intel-gfx/2013-June/028819.html
References: https://www.osadl.org/?id=1543#c7602
References: https://bugs.freedesktop.org/show_bug.cgi?id=63825Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Carsten Emde <C.Emde@osadl.org>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This hopefully fixes the root cause behind the workaround added in

commit 25ff1195
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Thu Apr 4 21:31:03 2013 +0100

    drm/i915: Workaround incoherence between fences and LLC across multiple CPUs

Thanks to further investigation by Jon Bloomfield, he realised that
the 64-bit register might be broken up by the hardware into two 32-bit
writes (a problem we have encountered elsewhere). This non-atomicity
would then cause an issue where a second thread would see an
intermediate register state (new high dword, old low dword), and this
register would randomly be used in preference to its own thread register.
This would cause the second thread to read from and write into a fairly
random tiled location.  Breaking the operation into 3 explicit 32-bit
updates (first disable the fence, poke the upper bits, then poke the lower
bits and enable) ensures that, given proper serialisation between the
32-bit register write and the memory transfer, that the fence value is
always consistent.

Armed with this knowledge, we can explain how the previous workaround
work. The key to the corruption is that a second thread sees an
erroneous fence register that conflicts and overrides its own. By
serialising the fence update across all CPUs, we have a small window
where no GTT access is occurring and so hide the potential corruption.
This also leads to the conclusion that the earlier workaround was
incomplete.

v2: Be overly paranoid about the order in which fence updates become
visible to the GPU to make really sure that we turn the fence off before
doing the update, and then only switch the fence on afterwards.
Signed-off-by: NJon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Carsten Emde <C.Emde@osadl.org>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Daniel noticed a problem where is we wrote to an object with ring A in
the middle of a very long running batch, then executed a quick batch on
ring B before a batch that reads from the same object, its obj->ring would
now point to ring B, but its last_write_seqno would be still relative to
ring A. This would allow for the user to read from the object before the
GPU had completed the write, as set_domain would only check that ring B
had passed the last_write_seqno.

To fix this simply (and inelegantly), we bump the last_write_seqno when
switching rings so that the last_write_seqno is always relative to the
current obj->ring.

This fixes igt/tests/gem_write_read_ring_switch.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
[danvet: Add note about the newly created igt which exercises this
bug.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch partially reverts commit 36ec8f87 for
IvyBridge CPUs.

The original commit results in repeated 'Timed out waiting for forcewake old
ack to clear' messages on a Supermicro C7H61 board (BIOS version 2.00 and 2.00b)
with i7-3770K CPU. It ultimately results in a hangup if the system is highly
loaded. Reverting the commit for IvyBridge CPUs fixes the issue.

Issue a warning if the CPU is IvyBridge and mt forcewake is disabled, since
this condition can result in secondary issues.

v2: Only revert patch for Ivybridge CPUs
    Issue info message if mt forcewake is disabled on Ivybridge

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=60541
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66139Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

DP 1.2 compatible displays may report a 5.4Gbps maximum bandwidth which
the driver will treat as an invalid value and use 1.62Gbps instead. Fix
this by capping to 2.7Gbps for sinks reporting a 5.4Gbps max bw.

Also add a warning for reserved values.

v2:
- allow only bw values explicitly listed in the DP standard (Daniel,
  Chris)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It's not a good idea to also run the pipe_control cleanup.

This regression has been introduced whith the original cs tlb w/a in

commit b45305fc
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Mon Dec 17 16:21:27 2012 +0100

    drm/i915: Implement workaround for broken CS tlb on i830/845

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64610
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

obj->mm_list link to dev_priv->mm.inactive_list/active_list
obj->global_list link to dev_priv->mm.unbound_list/bound_list

This regression has been introduced in

commit 93927ca5
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jan 10 18:03:00 2013 +0100

    drm/i915: Revert shrinker changes from "Track unbound pages"

Cc: stable@vger.kernel.org
Signed-off-by: NXiong Zhang <xiong.y.zhang@intel.com>
[danvet: Add regression notice.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now that the audio driver is using our power well API, everything
should be working correctly, so let's give it a try.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This fixes gpu reset on my gm45 - without this patch the bsd thing is
forever stuck since the seqno updates never reach the status page.

Tbh I have no idea how this ever worked without rewriting the hws
registers after a gpu reset.

To satisfy my OCD also give the functions a bit more consistent names:
- Use status_page everywhere, also for the physical addressed one.
- Use init for the allocation part and setup for the register setup
  part consistently.

Long term I'd really like to share the hw init parts completely
between gpu reset, resume and driver load, i.e. to call
i915_gem_init_hw instead of the individual pieces we might need.

v2: Add the missing paragraph to the commit message about what bug
exactly this patch here fixes.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65495
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: Nlu hua <huax.lu@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This replaceable mainboard only has a VGA-out, yet it claims to also have
a connected LVDS header.

Addresses https://bugs.freedesktop.org/show_bug.cgi?id=65256Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reported-by: NCornel Panceac <cpanceac@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <annndddrr@gmail.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This replaceable mainboard only has a VGA-out, yet it claims to also have
a connected LVDS header.

Addresses https://bugs.freedesktop.org/show_bug.cgi?id=63860

[jani.nikula@intel.com: use DMI_EXACT_MATCH for board name.]
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reported-by: <annndddrr@gmail.com>
Cc: Cornel Panceac <cpanceac@gmail.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Every other place properly checks whether we've managed to set
up the stolen allocator at boot-up properly, with the exception
of the cleanup code. Which results in an ugly

*ERROR* Memory manager not clean. Delaying takedown

at module unload time since the drm_mm isn't initialized at all.

v2: While at it check whether the stolen drm_mm is initialized instead
of the more obscure stolen_base == 0 check.

v3: Fix up the logic. Also we need to keep the stolen_base check in
i915_gem_object_create_stolen_for_preallocated since that can be
called before stolen memory is fully set up. Spotted by Chris Wilson.

v4: Readd the conversion in i915_gem_object_create_stolen_for_preallocated,
the check is for the dev_priv->mm.gtt_space drm_mm, the stolen
allocatot must already be initialized when calling that function (if
we indeed have stolen memory).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65953
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: lu hua <huax.lu@intel.com> (v3)
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

So it appears that I have encountered some bogosity when trying to call
i915_error_printf() with many arguments from print_error_buffers(). The
symptom is that the vsnprintf parser tries to interpret an integer arg
as a character string, the resulting OOPS indicating stack corruption.
Replacing the single call with its 13 format specifiers and arguments
with multiple calls to i915_error_printf() worked fine. This patch goes
one step further and introduced i915_error_puts() to pass the strings
simply.

It may not fix the root cause, but it does prevent my box from dying and
I think helps make print_error_buffers() more friendly.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66077
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Harmonise the completion logic between the non-blocking and normal
wait_rendering paths, and move that logic into a common function.

In the process, we note that the last_write_seqno is by definition the
earlier of the two read/write seqnos and so all successful waits will
have passed the last_write_seqno. Therefore we can unconditionally clear
the write seqno and its domains in the completion logic.

v2: Add the missing ring parameter, because sometimes it is good to have
things compile.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In the introduction of the non-blocking wait, I cut'n'pasted the wait
completion code from normal locked path. Unfortunately, this neglected
that the normal path returned early if the wait returned early. The
result is that read-only waits may return whilst the GPU is still
writing to the bo.

Fixes regression from
commit 3236f57a [v3.7]
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Aug 24 09:35:09 2012 +0100

    drm/i915: Use a non-blocking wait for set-to-domain ioctl
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66163
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On DevCPT, the control register for Transcoder DP Sync Polarity is
TRANS_DP_CTL, not DP_CTL.
Without this patch, Many call trace occur on CPT machine with DP monitor.
The call trace is like: *ERROR* mismatch in adjusted_mode.flags(expected X,found X)

v2: use intel-crtc to simple patch, suggested by Daniel.
Signed-off-by: NXiong Zhang <xiong.y.zhang@intel.com>
[danvet: Extend the encoder->get_config comment to specify that we now
also depend upon intel_encoder->base.crtc being correct. Also bikeshed
s/intel_crtc/crtc/.]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65287Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Our interrupt handler (in hardirq context) could race with the timer
(in softirq context), hence we need to hold the spinlock around the
call to ->hdp_irq_setup in intel_hpd_irq_handler, too.

But as an optimization (and more so to clarify things) we don't need
to do the irqsave/restore dance in the hardirq context.

Note also that on ilk+ the race isn't just against the hotplug
reenable timer, but also against the fifo underrun reporting. That one
also modifies the SDEIMR register (again protected by the same
dev_priv->irq_lock).

To lock things down again sprinkle a assert_spin_locked. But exclude
the functions touching SDEIMR for now, I want to extract them all into
a new helper function (like we do already for pipestate, display
interrupts and all the various gt interrupts).

v2: Add the missing 't' Egbert spotted in a comment.

v3: Actually fix the right misspelled comment (Paulo).

Cc: Egbert Eich <eich@suse.de>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The usual pattern for our sub-function irq_handlers is that they check
for the no-irq case themselves. This results in more streamlined code
in the upper irq handlers.

v2: Rebase on top of the i965g/gm sdvo hpd fix.

Cc: Egbert Eich <eich@suse.de>
Reviewed-by: NEgbert Eich <eich@suse.de>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Everywhere the same.

Note that this patch leaves unnecessary braces behind, but the next
patch will kill those all anyway (including the if itself) so I've
figured I can keep the diff a bit smaller.

v2: Rebase on top of the i965g/gm sdvo hpd fix.

Cc: Egbert Eich <eich@suse.de>
Reviewed-by: NEgbert Eich <eich@suse.de>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We already have a vfunc for this (and other parts of the hpd storm
handling code already use it).

v2: Rebase on top of the i965g/gm sdvo hpd fix.

Cc: Egbert Eich <eich@suse.de>
Reviewed-by: NEgbert Eich <eich@suse.de>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The combination of Paulo's fifo underrun detection code and Egbert's
hpd storm handling code unfortunately made the hpd storm handling code
racy.

To avoid duplicating tricky interrupt locking code over all platforms
start with a bit of refactoring. This patch is the very first step
since in the end the irq storm handling code will handle all hotplug
logic (and so also encapsulate the locking nicely).

v2: Rebase on top of the i965g/gm sdvo hpd fix.

Cc: Egbert Eich <eich@suse.de>
Reviewed-by: NEgbert Eich <eich@suse.de>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

By the time we write DEIER in the postinstall hook the interrupt
handler could run any time. And it does modify DEIER to handle
interrupts.

Hence the DEIER read-modify-write cycle for enabling the PCU event
source is racy. Close this races the same way we handle vblank
interrupts: Unconditionally enable the interrupt in the IER register,
but conditionally mask it in IMR. The later poses no such race since
the interrupt handler does not touch DEIMR.

Also update the comment, the clearing has already happened
unconditionally above.

v2: Actually shove the updated comment into the right train^W commit,
as spotted by Paulo.

Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The haswell unclaimed register handling code forgot to take the
spinlock. Since this is in the context of the non-rentrant interupt
handler and we only have one interrupt handler it is sufficient to
just grab the spinlock - we do not need to exclude any other
interrupts from running on the same cpu.

To prevent such gaffles in the future sprinkle assert_spin_locked over
these functions. Unfornately this requires us to hold the spinlock in
the ironlake postinstall hook where it is not strictly required:
Currently that is run in single-threaded context and with userspace
exlcuded from running concurrent ioctls. Add a comment explaining
this.

v2: ivb_can_enable_err_int also needs to be protected by the spinlock.
To ensure this won't happen in the future again also sprinkle a
spinlock assert in there.

v3: Kill the 2nd call to ivb_can_enable_err_int I've accidentally left
behind, spotted by Paulo.

Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: NPaulo Zanoni <przanoni@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

With updates to the spec, we can actually see the context layout, and
how many dwords are allocated. That table suggests we need 70720 bytes
per HW context. Rounded up, this is 18 pages. Looking at what lives
after the current 4 pages we use, I can't see too much important (mostly
it's d3d related), but there are a couple of things which look scary. I
am hopeful this can explain some of our odd HSW failures.

v2: Make the context only 17 pages. The power context space isn't used
ever, and execlists aren't used in our driver, making the actual total
66944 bytes.

v3: Add a comment to the code. (Jesse & Paulo)
Reported-by: N"Azad, Vinit" <vinit.azad@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We forgot to add VLV_DISPLAY_BASE to the VLV sprite registers, which
caused the sprites to not work at all.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The PIPECONF color range bit doesn't appear to be effective, on HDMI
outputs at least. The color range bit in the port register works though,
so let's use it.

I have not yet verified whether the PIPECONF bit works on DP outputs.

This reverts commit 83a2af88.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

LPF is short for "low pass filter".
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>