- 18 1月, 2010 1 次提交
-
-
由 Alexey Dobriyan 提交于
__net_init/__net_exit are apparently not going away, so use them to full extent. In some cases __net_init was removed, because it was called from __net_exit code. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 12月, 2009 4 次提交
-
-
由 Eric W. Biederman 提交于
Refactor the code so fib_rules_register always takes a template instead of the actual fib_rules_ops structure that will be used. This is required for network namespace support so 2 out of the 3 callers already do this, it allows the error handling to be made common, and it allows fib_rules_unregister to free the template for hte caller. Modify fib_rules_unregister to use call_rcu instead of syncrhonize_rcu to allw multiple namespaces to be cleaned up in the same rcu grace period. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
commit d124356ce314fff22a047ea334379d5105b2d834 Author: Patrick McHardy <kaber@trash.net> Date: Thu Dec 3 12:16:35 2009 +0100 net: fib_rules: allow to delete local rule Allow to delete the local rule and recreate it with a higher priority. This can be used to force packets with a local destination out on the wire instead of routing them to loopback. Additionally this patch allows to recreate rules with a priority of 0. Combined with the previous patch to allow oif classification, a socket can be bound to the desired interface and packets routed to the wire like this: # move local rule to lower priority ip rule add pref 1000 lookup local ip rule del pref 0 # route packets of sockets bound to eth0 to the wire independant # of the destination address ip rule add pref 100 oif eth0 lookup 100 ip route add default dev eth0 table 100 Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
commit 68144d350f4f6c348659c825cde6a82b34c27a91 Author: Patrick McHardy <kaber@trash.net> Date: Thu Dec 3 12:05:25 2009 +0100 net: fib_rules: add oif classification Support routing table lookup based on the flow's oif. This is useful to classify packets originating from sockets bound to interfaces differently. The route cache already includes the oif and needs no changes. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
commit 229e77eec406ad68662f18e49fda8b5d366768c5 Author: Patrick McHardy <kaber@trash.net> Date: Thu Dec 3 12:05:23 2009 +0100 net: fib_rules: rename ifindex/ifname/FRA_IFNAME to iifindex/iifname/FRA_IIFNAME The next patch will add oif classification, rename interface related members and attributes to reflect that they're used for iif classification. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 5月, 2009 1 次提交
-
-
由 Rami Rosen 提交于
The netlink message header (struct nlmsghdr) is an unused parameter in fill method of fib_rules_ops struct. This patch removes this parameter from this method and fixes the places where this method is called. (include/net/fib_rules.h) Signed-off-by: NRami Rosen <ramirose@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 5月, 2009 1 次提交
-
-
由 Rami Rosen 提交于
Signed-off-by: NRami Rosen <ramirose@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 2月, 2009 1 次提交
-
-
由 Pablo Neira Ayuso 提交于
This patch changes the return value of nlmsg_notify() as follows: If NETLINK_BROADCAST_ERROR is set by any of the listeners and an error in the delivery happened, return the broadcast error; else if there are no listeners apart from the socket that requested a change with the echo flag, return the result of the unicast notification. Thus, with this patch, the unicast notification is handled in the same way of a broadcast listener that has set the NETLINK_BROADCAST_ERROR socket flag. This patch is useful in case that the caller of nlmsg_notify() wants to know the result of the delivery of a netlink notification (including the broadcast delivery) and take any action in case that the delivery failed. For example, ctnetlink can drop packets if the event delivery failed to provide reliable logging and state-synchronization at the cost of dropping packets. This patch also modifies the rtnetlink code to ignore the return value of rtnl_notify() in all callers. The function rtnl_notify() (before this patch) returned the error of the unicast notification which makes rtnl_set_sk_err() reports errors to all listeners. This is not of any help since the origin of the change (the socket that requested the echoing) notices the ENOBUFS error if the notification fails and should resync itself. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Acked-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 11月, 2008 1 次提交
-
-
由 Eric W. Biederman 提交于
We need to setup the network namespace state before we register the notifier. Otherwise if a network device is already registered we get a nasty NULL pointer dereference. Signed-off-by: NEric W. Biederman <ebiederm@maxwell.aristanetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 7月, 2008 1 次提交
-
-
由 Denis V. Lunev 提交于
This is required to pass namespace context into rt_cache_flush called from ->flush_cache. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 7月, 2008 1 次提交
-
-
由 Patrick McHardy 提交于
The errno code returned must be negative. Fixes "RTNETLINK answers: Unknown error 18446744073709551519". Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 4月, 2008 1 次提交
-
-
由 Denis V. Lunev 提交于
Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 3月, 2008 2 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Introduce per-sock inlines: sock_net(), sock_net_set() and per-inet_timewait_sock inlines: twsk_net(), twsk_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 YOSHIFUJI Hideaki 提交于
Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
- 29 1月, 2008 9 次提交
-
-
由 Denis V. Lunev 提交于
Save namespace context on the fib rule at the rule creation time and call routing lookup in the correct namespace. Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Remove struct net from fib_rules_register(unregister)/notify_change paths and diet code size a bit. add/remove: 0/0 grow/shrink: 10/12 up/down: 35/-100 (-65) function old new delta notify_rule_change 273 280 +7 trie_show_stats 471 475 +4 fn_trie_delete 473 477 +4 fib_rules_unregister 144 148 +4 fib4_rule_compare 119 123 +4 resize 2842 2845 +3 fn_trie_select_default 515 518 +3 inet_sk_rebuild_header 836 838 +2 fib_trie_seq_show 764 766 +2 __devinet_sysctl_register 276 278 +2 fn_trie_lookup 1124 1123 -1 ip_fib_check_default 133 131 -2 devinet_conf_sysctl 223 221 -2 snmp_fold_field 126 123 -3 fn_trie_insert 2091 2086 -5 inet_create 876 870 -6 fib4_rules_init 197 191 -6 fib_sync_down 452 444 -8 inet_gso_send_check 334 325 -9 fib_create_info 3003 2991 -12 fib_nl_delrule 568 553 -15 fib_nl_newrule 883 852 -31 Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
fib_rules_unregister is called only after successful register and the return code is never checked. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Move static rules_ops & rules_mod_lock to the struct net, register the pernet subsys to init them and enjoy the fact that the core rules infrastructure works in the namespace. Real IPv4 fib rules virtualization requires fib tables support in the namespace and will be done seriously later in the patchset. Acked-by: NBenjamin Thery <benjamin.thery@bull.net> Acked-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
fib_rules_ops contains operations and the list of configured rules. ops will become per/namespace soon, so we need them to be known in the default_pref callback. Acked-by: NBenjamin Thery <benjamin.thery@bull.net> Acked-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
The patch extends the different fib rules API in order to pass the network namespace pointer. That will allow to access the different tables from a namespace relative object. As usual, the pointer to the init_net variable is passed as parameter so we don't break the network. Acked-by: NBenjamin Thery <benjamin.thery@bull.net> Acked-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Lezcano 提交于
When the fib_rules initialization finished, no return code is provided so there is no way to know, for the caller, if the initialization has been successful or has failed. This patch fix that. Signed-off-by: NDaniel Lezcano <dlezcano@fr.ibm.com> Acked-by: NBenjamin Thery <benjamin.thery@bull.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
After this patch none of the netlink callback support anything except the initial network namespace but the rtnetlink infrastructure now handles multiple network namespaces. Changes from v2: - IPv6 addrlabel processing Changes from v1: - no need for special rtnl_unlock handling - fixed IPv6 ndisc Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
Before I can enable rtnetlink to work in all network namespaces I need to be certain that something won't break. So this patch deliberately disables all of the rtnletlink methods in everything except the initial network namespace. After the methods have been audited this extra check can be disabled. Changes from v1: - added IPv6 addrlabel protection Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 11 11月, 2007 1 次提交
-
-
由 Denis V. Lunev 提交于
This patch fixes a small memory leak. Default fib rules can be deleted by the user if the rule does not carry FIB_RULE_PERMANENT flag, f.e. by ip rule flush Such a rule will not be freed as the ref-counter has 2 on start and becomes clearly unreachable after removal. Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 10月, 2007 3 次提交
-
-
由 Denis V. Lunev 提交于
This patch slightly cleanups FIB rules framework. rules_list as a pointer on struct fib_rules_ops is useless. It is always assigned with a static per/subsystem list in IPv4, IPv6 and DecNet. Signed-off-by: NDenis V. Lunev <den@openvz.org> Acked-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
Every user of the network device notifiers is either a protocol stack or a pseudo device. If a protocol stack that does not have support for multiple network namespaces receives an event for a device that is not in the initial network namespace it quite possibly can get confused and do the wrong thing. To avoid problems until all of the protocol stacks are converted this patch modifies all netdev event handlers to ignore events on devices that are not in the initial network namespace. As the rest of the code is made network namespace aware these checks can be removed. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 4月, 2007 7 次提交
-
-
由 Patrick McHardy 提交于
Since we're now holding the rtnl during the entire dump operation, we can remove additional locking for rtnl protected data. This patch does that for all simple cases (dev_base_lock for dev_base walking, RCU protection for FIB rule dumping). Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
The results of FIB rules lookups are cached in the routing cache except for IPv6 as no such cache exists. So far, it was the responsibility of the user to flush the cache after modifying any rules. This lead to many false bug reports due to misunderstanding of this concept. This patch automatically flushes the route cache after inserting or deleting a rule. Thanks to Muli Ben-Yehuda <muli@il.ibm.com> for catching a bug in the previous patch. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
The use of nop rules simplifies the usage of goto rules and adds more flexibility as they allow targets to remain while the actual content of the branches can change easly. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Rules which match against device names in their selector can remain while the device itself disappears, in fact the device doesn't have to present when the rule is added in the first place. The device name is resolved by trying when the rule is added and later by listening to NETDEV_REGISTER/UNREGISTER notifications. This patch adds the flag FIB_RULE_DEV_DETACHED which is set towards userspace when a rule contains a device match which is unresolved at the moment. This eases spotting the reason why certain rules seem not to function properly. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
This patch adds a new rule action FR_ACT_GOTO which allows to skip a set of rules by jumping to another rule. The rule to jump to is specified via the FRA_GOTO attribute which carries a rule preference. Referring to a rule which doesn't exists is explicitely allowed. Such goto rules are marked with the flag FIB_RULE_UNRESOLVED and will act like a rule with a non-matching selector. The rule will become functional as soon as its target is present. The goto action enables performance optimizations by reducing the average number of rules that have to be passed per lookup. Example: 0: from all lookup local 40: not from all to 192.168.23.128 goto 32766 41: from all fwmark 0xa blackhole 42: from all fwmark 0xff blackhole 32766: from all lookup main Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Implements a unified, protocol independant rules dumping function which is capable of both, dumping a specific protocol family or all of them. This speeds up dumping as less lookups are required. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 4月, 2007 1 次提交
-
-
由 Steven Whitehouse 提交于
This changes the "not found" error return for the lookup function to -ESRCH so that it can be distinguished from the case where a rule or route resulting in -ENETUNREACH has been found during the search. It fixes a bug where if DECnet was compiled with routing support, but no routes were added to the routing table, it was failing to fall back to endnode routing. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com> Signed-off-by: NPatrick Caulfield <pcaulfie@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 3月, 2007 1 次提交
-
-
由 Thomas Graf 提交于
Based upon a patch from Patrick McHardy. The fib_rules netlink attribute policy introduced in 2.6.19 broke userspace compatibilty. When specifying a rule with "from all" or "to all", iproute adds a zero byte long netlink attribute, but the policy requires all addresses to have a size equal to sizeof(struct in_addr)/sizeof(struct in6_addr), resulting in a validation error. Check attribute length of FRA_SRC/FRA_DST in the generic framework by letting the family specific rules implementation provide the length of an address. Report an error if address length is non zero but no address attribute is provided. Fix actual bug by checking address length for non-zero instead of relying on availability of attribute. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 3月, 2007 1 次提交
-
-
由 Patrick McHardy 提交于
fib_rules_dump needs to use list_for_each_entry_rcu to protect against concurrent changes to the rules list. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 2月, 2007 1 次提交
-
-
由 Patrick McHardy 提交于
Currently netlink users BUG when the allocated skb for an event notification is undersized. While this is certainly a kernel bug, its not critical and crashing the kernel is too drastic, especially when considering that these errors have appeared multiple times in the past and it BUGs even if no listeners are present. This patch replaces BUG by WARN_ON and changes the notification functions to inform potential listeners of undersized allocations using a unique error code (EMSGSIZE). Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 12月, 2006 2 次提交
-
-
由 Thomas Graf 提交于
Account for the netlink message header size directly in nlmsg_new() instead of relying on the caller calculate it correctly. Replaces error handling of message construction functions when constructing notifications with bug traps since a failure implies a bug in calculating the size of the skb. Signed-off-by: NThomas Graf <tgraf@suug.ch> Acked-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Introduces a new flag FIB_RULE_INVERT causing rules to apply if the specified selector doesn't match. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-