We get a false-positive warning in linux-next for the mlx5 driver:

infiniband/hw/mlx5/mr.c: In function ‘mlx5_ib_reg_user_mr’:
infiniband/hw/mlx5/mr.c:1172:5: error: ‘order’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
infiniband/hw/mlx5/mr.c:1161:6: note: ‘order’ was declared here
infiniband/hw/mlx5/mr.c:1173:6: error: ‘ncont’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
infiniband/hw/mlx5/mr.c:1160:6: note: ‘ncont’ was declared here
infiniband/hw/mlx5/mr.c:1173:6: error: ‘page_shift’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
infiniband/hw/mlx5/mr.c:1158:6: note: ‘page_shift’ was declared here
infiniband/hw/mlx5/mr.c:1143:13: error: ‘npages’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
infiniband/hw/mlx5/mr.c:1159:6: note: ‘npages’ was declared here

I had a trivial workaround for gcc-5 or higher, but that didn't work
on gcc-4.9 unfortunately.

The only way I found to avoid the warnings for gcc-4.9, short of
initializing each of the arguments first was to change the calling
conventions to separate the error code from the umem pointer. This
avoids casting the error codes from one pointer to another incompatible
pointer, and lets gcc figure out when that the data is actually valid
whenever we return successfully.
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

- Add MODIFY_QP_EX CMD to extend modify_qp.
- Rate limit will be updated in the following state transactions: RTR2RTS,
  RTS2RTS. The limit will be removed when SQ is in RST and ERR state.
Signed-off-by: NBodong Wang <bodong@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Enable mlx5 based hardware to report packet pacing capabilities
from kernel to user space. Packet pacing allows to limit the rate to any
number between the maximum and minimum, based on user settings.

The capabilities are exposed to user space through query_device by uhw.
The following capabilities are reported:

1. The maximum and minimum rate limit in kbps supported by packet pacing.
2. Bitmap showing which QP types are supported by packet pacing operation.
Signed-off-by: NBodong Wang <bodong@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

On some environments, such as certain SRIOV VF configurations, RoCE is
not supported for mlx5 Ethernet ports. Currently, the driver will not
open IB device on that port.

This is problematic, since we do want user-space RAW Ethernet (RAW_PACKET
QPs) functionality to remain in place. For that end, enhance the relevant
driver flows such that we do create a device instance in that case.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This is a pre-step towards having mlx5 IB device also over Eth ports where
RoCE is not supported. We change the roce enable/disable and roce_lag
init/fini function names to have _eth instead of _roce.

This patch doesn't change any functionality.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Refactor the netdev notifier registration into a small helper function.

This is a pre-step towards having mlx5 IB device over an Ethernet port
which doesn't support RoCE. Also, renamed the de-registration helper
and the new helper as netdev notifier and not roce, to make it clear
this is not only used with roce.

This patch doesn't change any functionality.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The fast_registration length is used to convey length for memory
registrations through UMR which can be of any size up to 2^64.

Change the length type to be u64.

Fixes: 968e78dd ('IB/mlx5: Enhance UMR support to allow partial page table update')
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When enabling many VFs, the total amount of DMA mappings increase
significantly. This causes DMA allocations to take a lot of time
since they are serialized in the kernel.

As a result the driver enters into fatal condition due to
timeout and the system hangs. To recover from this we disable
MR cache for VFs.

PFs will still have a full cache and VFs cache can be manipulated
as usual after driver load.

Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Move the SRQ type assignment to be before actually using it
in create_srq_user() and in create_srq_kernel() functions.

Fixes: af1ba291 ('{net, IB}/mlx5: Refactor internal SRQ API')
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

For non-special QPs, the port value becomes non-zero only at the
RESET-to-INIT transition. If the QP has not undergone that transition,
its port number value is still zero.

If such a QP is destroyed before being moved out of the RESET state,
subtracting one from the qp port number results in a negative value.
Using that negative value as an index into the qp1_proxy array
results in an out-of-bounds array reference.

Fix this by testing that the QP type is one that uses qp1_proxy before
using the port number. For special QPs of all types, the port number is
specified at QP creation time.

Fixes: 9433c188 ("IB/mlx4: Invoke UPDATE_QP for proxy QP1 on MAC changes")
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Advertise that create_ah and destroy_ah verbs are accessible from
uverbs interface.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Resolving a MAC address for a given IP address in userspace is inefficient.
This patch lets mlx5 user driver using the kernel driver to resolve the mac
and get the answer in the private section of the response.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add struct ib_udata to the signature of create_ah callback that is
implemented by IB device drivers. This allows HW drivers to return extra
data to the userspace library.
This patch prepares the ground for mlx5 driver to resolve destination
mac address for a given GID and return it to userspace.
This patch was previously submitted by Knut Omang as a part of the
patch set to support Oracle's Infiniband HCA (SIF).
Signed-off-by: NKnut Omang <knut.omang@oracle.com>
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

To make mlx5 user driver aware of whether kernel driver returns dmac
in user data response add a new flag that will be returned back to
user-space through alloc_ucontext.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add support to match packet fields which are tunneled,
i.e. support matching the header of the inner packet which is the result of
or bit operation of the original header and the IB_FLOW_SPEC_INNER type.

The combination of IB_FLOW_SPEC_INNER | IB_FLOW_SPEC_VXLAN_TUNNEL is not
needed to be checked, because the IB core has this check already.
Signed-off-by: NMoses Reuben <mosesr@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add support to receive specific Vxlan packet in ConnectX-4.
Signed-off-by: NMoses Reuben <mosesr@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

CQE compressing reduces PCI overhead by coalescing and compressing
multiple CQEs into a single merged CQE. Successful compressing
improves message rate especially for small packet traffic.

CQE compressing is supported for all 64B CQE formats (with certain
limitations) generated by RQ/Responder or by SQ/Requestor.
Signed-off-by: NBodong Wang <bodong@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The capabilities include:
- Max number of compressed and aggregated CQEs in a single session,
  while zero means unsupported.
- For Responder, there are two formats of mini CQE: mini CQE with Rx
  hash and mini CQE with checksum. They're mutual exclusive.
Signed-off-by: NBodong Wang <bodong@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The capabilities whether hardware support multi packet WQE or not is
exposed to user space through query_device by uhw.
Signed-off-by: NBodong Wang <bodong@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Before reading GRH attributes, need to make sure AH contains GRH,
and in addition, initialize GID type.

Fixes: dbf727de ('IB/core: Use GID table in AH creation and dmac resolution')
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

According to the firmware spec, FLOW_STEERING_IB_UC_QP_RANGE command is
supported only if dmfs_ipoib bit is set.

If it isn't set we want to ensure allocating NET_IF QPs fail. We do so
by filling out the allocation bitmap. By thus, the NET_IF QPs allocating
function won't find any free QP and will fail.

Fixes: c1c98501 ('IB/mlx4: Add support for steerable IB UD QPs')
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Report the correct speed in the port attributes when using a 56Gbps
ethernet link.  Without this change the field is incorrectly set to 10.

Fixes: a9c766bb ('IB/mlx4: Fix info returned when querying IBoE ports')
Fixes: 2e96691c ('IB: Use central enum for speed instead of hard-coded values')
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Use INT_MAX since this is the max value the attribute can hold, though
hardware capability is unlimited.

Fixes: 225c7b1f ('IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters')
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If OpenSM runs over a ConnectX-3, and there are ConnectX-4 or Connect-IB
VFs active on the network, the OpenSM will receive QP1 packets containing
a GRH where the destination GID is the "Well-Known GID" -- which is not a
GID in the HCA Port's GID Table.

This GID must be tested-for separately -- and packets which contain
this destination GID should be routed to slave 0 (the PF).

Fixes: 37bfc7c1 ('IB/mlx4: SR-IOV multiplex and demultiplex MADs')
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When MAD arrives to the hypervisor, we need to identify which slave it
should be sent by destination GID. When L3 protocol is IPv4 the
GRH is replaced by an IPv4 header. This patch detects when IPv4 header
needs to be parsed instead of GRH.

Fixes: b6ffaeff ('mlx4: In RoCE allow guests to have multiple GIDS')
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Set traffic class within sl_tclass_flowlabel when create iboe AH.
Without this the TOS value will be empty when running VLAN tagged
traffic, because the TOS value is taken from the traffic class in the
address handle attributes.

Fixes: 9106c410 ('IB/mlx4: Fix SL to 802.1Q priority-bits mapping for IBoE')
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The maximum page size in the mkey context is 2GB.

Until today, we didn't enforce this requirement in the code,
and therefore, if we got a page size larger than 2GB, we
have passed zeros in the log_page_shift instead of the actual value
and the registration failed.

This patch limits the driver to use compound pages of 2GB for mkeys.

Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add the 512 bytes limit of RDMA READ and the size of remote
address to the max SGE calculation.

Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Wait before continuing unload till all pending mkey async creation requests
are done.

Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

We put INT_MAX since this is the max value that can be held.
Though there is no hardware limitation, this is practically
a large enough number so we can use it.

Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Remove from the driver the limitation imposed by firmware check
to not allow change of atomic permissions for indirect UMRs.
In order to avoid failures on old firmware, we only ask for change
of atomic permissions if atomic operations are supported.

Fixes: 968e78dd ('IB/mlx5: Enhance UMR support to allow partial page table update')
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Replace the pre-defined macro signifying inline umr instead
of the numerical constant.
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Currently when calling mlx5_add_flow_rule we accept
only one flow destination, this commit allows to pass
multiple destinations.

This change forces us to change the return structure to a more
flexible one. We introduce a flow handle (struct mlx5_flow_handle),
it holds internally the number for rules created and holds an array
where each cell points the to a flow rule.

From the consumers (of mlx5_add_flow_rule) point of view this
change is only cosmetic and requires only to change the type
of the returned value they store.

From the core point of view, we now need to use a loop when
allocating and deleting rules (e.g given to us a flow handler).
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>

Do not dispatch unknown mlx5 core events on mlx5_ib_event.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>

This removes the 'write' and 'force' from get_user_pages() and replaces
them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers
as use of this flag can result in surprising behaviour (and hence bugs)
within the mm subsystem.
Signed-off-by: NLorenzo Stoakes <lstoakes@gmail.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Acked-by: NJesper Nilsson <jesper.nilsson@axis.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add error handling support.
Register ib device with ib stack.
Signed-off-by: NRajesh Borundia <rajesh.borundia@cavium.com>
Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add support for GSI over light L2.
Signed-off-by: NRajesh Borundia <rajesh.borundia@cavium.com>
Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add light L2 interface for RoCE.
Signed-off-by: NRajesh Borundia <rajesh.borundia@cavium.com>
Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Implement fastpath verbs like ib_send_post, ib_post_recv and ib_poll_cq.
Signed-off-by: NRajesh Borundia <rajesh.borundia@cavium.com>
Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add support for user, dma and memory regions registration.
Signed-off-by: NRajesh Borundia <rajesh.borundia@cavium.com>
Signed-off-by: NRam Amrani <Ram.Amrani@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>