- 20 3月, 2011 1 次提交
-
-
由 Stefano Stabellini 提交于
Do not set max_pfn_mapped to the end of the initial memory mappings, that also contain pages that don't belong in pfn space (like the mfn list). Set max_pfn_mapped to the last real pfn mapped in the initial memory mappings that is the pfn backing _end. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> LKML-Reference: <alpine.DEB.2.00.1103171739050.3382@kaball-desktop> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 18 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
They were generated by 'codespell' and then manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi> Cc: trivial@kernel.org LKML-Reference: <1300389856-1099-3-git-send-email-lucas.demarchi@profusion.mobi> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 14 3月, 2011 3 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
Only enabled if XEN_DEBUG is enabled. We print a warning when: pfn_to_mfn(pfn) == pfn, but no VM_IO (_PAGE_IOMAP) flag set (and pfn is an identity mapped pfn) pfn_to_mfn(pfn) != pfn, and VM_IO flag is set. (ditto, pfn is an identity mapped pfn) [v2: Make it dependent on CONFIG_XEN_DEBUG instead of ..DEBUG_FS] [v3: Fix compiler warning] Reviewed-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
We walk over the whole P2M tree and construct a simplified view of which PFN regions belong to what level and what type they are. Only enabled if CONFIG_XEN_DEBUG_FS is set. [v2: UNKN->UNKNOWN, use uninitialized_var] [v3: Rebased on top of mmu->p2m code split] [v4: Fixed the else if] Reviewed-by: NIan Campbell <Ian.Campbell@eu.citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
If we find that the PFN is within the P2M as an identity PFN make sure to tack on the _PAGE_IOMAP flag. Reviewed-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 10 3月, 2011 1 次提交
-
-
由 Andrea Arcangeli 提交于
It's forbidden to take the page_table_lock with the irq disabled or if there's contention the IPIs (for tlb flushes) sent with the page_table_lock held will never run leading to a deadlock. Nobody takes the pgd_lock from irq context so the _irqsave can be removed. Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com> Acked-by: NRik van Riel <riel@redhat.com> Tested-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@kernel.org> LKML-Reference: <201102162345.p1GNjMjm021738@imap1.linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 04 3月, 2011 1 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
With this patch, we diligently set regions that will be used by the balloon driver to be INVALID_P2M_ENTRY and under the ownership of the balloon driver. We are OK using the __set_phys_to_machine as we do not expect to be allocating any P2M middle or entries pages. The set_phys_to_machine has the side-effect of potentially allocating new pages and we do not want that at this stage. We can do this because xen_build_mfn_list_list will have already allocated all such pages up to xen_max_p2m_pfn. We also move the check for auto translated physmap down the stack so it is present in __set_phys_to_machine. [v2: Rebased with mmu->p2m code split] Reviewed-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 24 2月, 2011 1 次提交
-
-
由 Yinghai Lu 提交于
e820_table_{start|end|top}, which are used to buffer page table allocation during early boot, are now derived from memblock and don't have much to do with e820. Change the names so that they reflect what they're used for. This patch doesn't introduce any behavior change. -v2: Ingo found that earlier patch "x86: Use early pre-allocated page table buffer top-down" caused crash on 32bit and needed to be dropped. This patch was updated to reflect the change. -tj: Updated commit description. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 15 1月, 2011 1 次提交
-
-
由 Stephen Rothwell 提交于
Fixes this build error: ERROR: "arbitrary_virt_to_machine" [drivers/xen/xen-gntdev.ko] undefined! Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 1月, 2011 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 03 12月, 2010 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
On stock 2.6.37-rc4, running: # mount lilith:/export /mnt/lilith # find /mnt/lilith/ -type f -print0 | xargs -0 file crashes the machine fairly quickly under Xen. Often it results in oops messages, but the couple of times I tried just now, it just hung quietly and made Xen print some rude messages: (XEN) mm.c:2389:d80 Bad type (saw 7400000000000001 != exp 3000000000000000) for mfn 1d7058 (pfn 18fa7) (XEN) mm.c:964:d80 Attempt to create linear p.t. with write perms (XEN) mm.c:2389:d80 Bad type (saw 7400000000000010 != exp 1000000000000000) for mfn 1d2e04 (pfn 1d1fb) (XEN) mm.c:2965:d80 Error while pinning mfn 1d2e04 Which means the domain tried to map a pagetable page RW, which would allow it to map arbitrary memory, so Xen stopped it. This is because vm_unmap_ram() left some pages mapped in the vmalloc area after NFS had finished with them, and those pages got recycled as pagetable pages while still having these RW aliases. Removing those mappings immediately removes the Xen-visible aliases, and so it has no problem with those pages being reused as pagetable pages. Deferring the TLB flush doesn't upset Xen because it can flush the TLB itself as needed to maintain its invariants. When unmapping a region in the vmalloc space, clear the ptes immediately. There's no point in deferring this because there's no amortization benefit. The TLBs are left dirty, and they are flushed lazily to amortize the cost of the IPIs. This specific motivation for this patch is an oops-causing regression since 2.6.36 when using NFS under Xen, triggered by the NFS client's use of vm_map_ram() introduced in 56e4ebf8 ("NFS: readdir with vmapped pages") . XFS also uses vm_map_ram() and could cause similar problems. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Bryan Schumaker <bjschuma@netapp.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Alex Elder <aelder@sgi.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 11月, 2010 1 次提交
-
-
由 Ian Campbell 提交于
Only make swapper_pg_dir readonly and pinned when generic x86 architecture code (which also starts on initial_page_table) switches to it. This helps ensure that the generic setup paths work on Xen unmodified. In particular clone_pgd_range writes directly to the destination pgd entries and is used to initialise swapper_pg_dir so we need to ensure that it remains writeable until the last possible moment during bring up. This is complicated slightly by the need to avoid sharing kernel PMD entries when running under Xen, therefore the Xen implementation must make a copy of the kernel PMD (which is otherwise referred to by both intial_page_table and swapper_pg_dir) before switching to swapper_pg_dir. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
- 25 11月, 2010 1 次提交
-
-
由 Ian Campbell 提交于
Only make swapper_pg_dir readonly and pinned when generic x86 architecture code (which also starts on initial_page_table) switches to it. This helps ensure that the generic setup paths work on Xen unmodified. In particular clone_pgd_range writes directly to the destination pgd entries and is used to initialise swapper_pg_dir so we need to ensure that it remains writeable until the last possible moment during bring up. This is complicated slightly by the need to avoid sharing kernel PMD entries when running under Xen, therefore the Xen implementation must make a copy of the kernel PMD (which is otherwise referred to by both intial_page_table and swapper_pg_dir) before switching to swapper_pg_dir. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Tested-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 13 11月, 2010 1 次提交
-
-
由 Ian Campbell 提交于
This hypercall allows Xen to specify a non-default location for the machine to physical mapping. This capability is used when running a 32 bit domain 0 on a 64 bit hypervisor to shrink the hypervisor hole to exactly the size required. [ Impact: add Xen hypercall definitions ] Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
-
- 12 11月, 2010 1 次提交
-
-
由 Stefano Stabellini 提交于
Set VM_PFNMAP in the privcmd mmap file_op, rather than later in xen_remap_domain_mfn_range when it is too late because vma_wants_writenotify has already been called and vm_page_prot has already been modified. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
- 30 10月, 2010 1 次提交
-
-
由 Ian Campbell 提交于
sizeof(pmd_t *) is 4 bytes on 32-bit PAE leading to an allocation of only 2048 bytes. The correct size is sizeof(pmd_t) giving us a full page allocation. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
- 23 10月, 2010 16 次提交
-
-
由 Juan Quintela 提交于
add the direct mapping area for ISA bus access when running as initial domain Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Jeremy Fitzhardinge 提交于
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Ian Campbell 提交于
Otherwise the second migration attempt fails because the mfn_list_list still refers to all the old mfns. We need to update the entires in both p2m_top_mfn and the mid_mfn pages which p2m_top_mfn refers to. In order to do this we need to keep track of the virtual addresses mapping the p2m_mid_mfn pages since we cannot rely on mfn_to_virt(p2m_top_mfn[idx]) since p2m_top_mfn[idx] will still contain the old MFN after a migration, which may now belong to another domain and hence have a different mapping in the m2p. Therefore add and maintain a third top level page, p2m_top_mfn_p[], which tracks the virtual addresses of the mfns contained in p2m_top_mfn[]. We also need to update the content of the p2m_mid_missing_mfn page on resume to refer to the page's new mfn. p2m_missing does not need updating since the migration process takes care of the leaf p2m pages for us. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
Convert Linux PAT entries into Xen ones when constructing ptes. Linux doesn't use _PAGE_PAT for ptes, so the only difference in the first 4 entries is that Linux uses _PAGE_PWT for WC, whereas Xen (and default) use it for WT. xen_pte_val does the inverse conversion. We hard-code assumptions about Linux's current PAT layout, but a warning on the wrmsr to MSR_IA32_CR_PAT should point out any problems. If necessary we could go to a more general table-based conversion between Linux and Xen PAT entries. hugetlbfs poses a problem at the moment, the x86 architecture uses the same flag for _PAGE_PAT and _PAGE_PSE, which changes meaning depending on which pagetable level we're using. At the moment this should be OK so long as nobody tries to do a pte_val on a hugetlbfs pte. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
Keep xen_max_p2m_pfn up to date with the end of the extra memory we're adding. It is possible that it will be too high since memory may be truncated by a "mem=" option on the kernel command line, but that won't matter. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
When setting up a pte for a missing pfn (no matching mfn), just create an empty pte rather than a junk mapping. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
When building mfn parts of p2m structure, we rely on being able to use mfn_to_virt, which in turn requires kernel to be mapped into the linear area (which is distinct from the kernel image mapping on 64-bit). Defer calling xen_build_mfn_list_list() until after xen_setup_kernel_pagetable(); Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
set_phys_to_machine() can return false on failure, which means a memory allocation failure for the p2m structure. It can only fail if setting the mfn for a pfn in previously unused address space. It is guaranteed to succeed if you're setting a mapping to INVALID_P2M_ENTRY or updating the mfn for an existing pfn. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
Make the p2m structure a 3 level tree which covers the full possible physical space. The p2m structure contains mappings from the domain's pfns to system-wide mfns. The structure has 3 levels and two roots. The first root is for the domain's own use, and is linked with virtual addresses. The second is all mfn references, and is used by Xen on save/restore to allow it to update the p2m mapping for the domain. At boot, the domain builder provides a simple flat p2m array for all the initially present pages. We construct the two levels above that using the early_brk allocator. After early boot time, set_phys_to_machine() will allocate any missing levels using the normal kernel allocator (at GFP_KERNEL, so it must be called in a normal blocking context). Because the early_brk() API requires us to pre-reserve the maximum amount of memory we could allocate, there is still a CONFIG_XEN_MAX_DOMAIN_MEMORY config option, but its only negative side-effect is to increase the kernel's apparent bss size. However, since all unused brk memory is returned to the heap, there's no real downside to making it large. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
Allocate p2m tables based on the actual runtime maximum pfn rather than the static config-time limit. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
Use early brk mechanism to allocate p2m tables, to save memory when booting non-Xen. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
- 21 10月, 2010 2 次提交
-
-
由 Ian Campbell 提交于
This allows xenfs to be built as a module, previously it required flush_tlb_all and arbitrary_virt_to_machine to be exported. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
Add xen_set_domain_pte() to allow setting a pte mapping a page from another domain. The common case is to map from DOMID_IO, the pseudo domain which owns all IO pages, but will also be used in the privcmd interface to map other domain pages. [ Impact: new Xen-internal API for cross-domain mappings ] Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
- 14 10月, 2010 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
Xen requires that all pages containing pagetable entries to be mapped read-only. If pages used for the initial pagetable are already mapped then we can change the mapping to RO. However, if they are initially unmapped, we need to make sure that when they are later mapped, they are also mapped RO. We do this by knowing that the kernel pagetable memory is pre-allocated in the range e820_table_start - e820_table_end, so any pfn within this range should be mapped read-only. However, the pagetable setup code early_ioremaps the pages to write their entries, so we must make sure that mappings created in the early_ioremap fixmap area are mapped RW. (Those mappings are removed before the pages are presented to Xen as pagetable pages.) Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> LKML-Reference: <4CB63A80.8060702@goop.org> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 28 8月, 2010 1 次提交
-
-
由 Yinghai Lu 提交于
1.include linux/memblock.h directly. so later could reduce e820.h reference. 2 this patch is done by sed scripts mainly -v2: use MEMBLOCK_ERROR instead of -1ULL or -1UL Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 24 8月, 2010 1 次提交
-
-
由 Alok Kataria 提交于
VMI was the only user of the alloc_pmd_clone hook, given that VMI is now removed we can also remove this hook. Signed-off-by: NAlok N Kataria <akataria@vmware.com> LKML-Reference: <1282608357.19396.36.camel@ank32.eng.vmware.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 30 7月, 2010 1 次提交
-
-
由 Stefano Stabellini 提交于
This patch introduce a CONFIG_XEN_PVHVM compile time option to enable/disable Xen PV on HVM support. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
-
- 27 7月, 2010 2 次提交
-
-
由 Jeremy Fitzhardinge 提交于
Rather than trying to deal with aliases once they appear, just completely inhibit them. Mostly the removal of aliases was managable, but it comes unstuck in xen_create_contiguous_region() because it gets executed at interrupt time (as a result of dma_alloc_coherent()), which causes all sorts of confusion in the vmap code, as it was never intended to be run in interrupt context. This has the unfortunate side effect of removing all the unmap batching the vmap code so carefully added, but that can't be helped. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Stefano Stabellini 提交于
When a pagetable is about to be destroyed, we notify Xen so that the hypervisor can clear the related shadow pagetable. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-