Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 29 3月, 2006 1 次提交
    • S
      sbp2: prevent unloading of 1394 low-level driver · 147830f2
      由 Stefan Richter 提交于 
      When a new SBP-2 unit is added, sbp2 now takes a reference on the 1394
low-level driver (ohci1394 or pcilynx).  This prevents the 1394 host driver
module from being unloaded, e.g. by an administrative routine cleanup of
unused kernel modules or when another 1394 driver which depends on ohci1394
is unloaded.

The reference is dropped when the SBP-2 unit was disconnected, when sbp2 is
unloaded or detached from the unit, or when addition of the SBP-2 unit failed.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NJody McIntyre <scjody@modernduck.com>
      147830f2
  3. 27 3月, 2006 1 次提交
  5. 26 3月, 2006 1 次提交
  7. 01 3月, 2006 1 次提交
  9. 23 2月, 2006 3 次提交
    • S
      sbp2: update 36byte inquiry workaround (fix compatibility regression) · a80614d1
      由 Stefan Richter 提交于 
      Since about Linux 2.6.14, sbp2's inquiry workaround did not work anymore
due to changes in the SCSI layer. Update it to become effective again.
Testing one of the two known affected bridges has shown that skip_ms_page_8
is required as well.

Also, make force_inquiry_hack tunable via /sys/module/sbp2/parameters.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NJody McIntyre <scjody@modernduck.com>
(cherry picked from 99496037c6744fd938ffb8ccfc8fc91762322ff8 commit)
      a80614d1
    • S
      sbp2: variable status FIFO address (fix login timeout) · 35bdddb8
      由 Stefan Richter 提交于 
      Let the ieee1394 core select a suitable 1394 address range for sbp2's
status FIFO instead of using a fixed range. Since the core only selects
addresses which are guaranteed to be out of the "physical range" as per
OHCI 1.1, this patch also fixes an old bug:

OHCI controllers which implement a writeable PhysicalUpperBound register
included sbp2's status FIFO in the physical range. That way sbp2 was
never notified of a succesful login and always failed after timeout.
Affected OHCI host adapters include ALi and Fujitsu controllers.

As another side effect of this patch, the status FIFO is no longer
located in a range for which OHCI chips perform "posted writes". Each
status write now requires a response subaction. But since large data
transfers involve only few status writes, there is no measurable
decrease of I/O throughput. What's more, the status FIFO is now safe
from potential host bus errors. Nevertheless, posted writes could be
re-enabled by extensions to the ARM features of the 1394 stack.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NJody McIntyre <scjody@modernduck.com>
(cherry picked from b2d38cccad4ef80d6b672b8f89aae5fe2907b113 commit)
      35bdddb8
    • S
      sbp2: fix another deadlock after disconnection · bf637ec3
      由 Stefan Richter 提交于 
      If there were commands enqueued but not completed before an SBP-2 unit
was unplugged (or an attempt to reconnect failed), knodemgrd or any
process which tried to remove the device would sleep uninterruptibly
in blk_execute_rq().  Therefore make sure that all commands are
completed when sbp2 retreats.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NJody McIntyre <scjody@modernduck.com>
(cherry picked from 61daa34c132c5d4ed8630e2c46e9bf2f0c7b3428 commit)
      bf637ec3
  11. 19 2月, 2006 1 次提交
  13. 17 1月, 2006 1 次提交
  15. 11 1月, 2006 1 次提交
  17. 07 1月, 2006 1 次提交
  19. 05 1月, 2006 1 次提交
  21. 02 1月, 2006 1 次提交
  23. 14 12月, 2005 3 次提交
  25. 13 12月, 2005 5 次提交
  27. 06 12月, 2005 2 次提交
  29. 02 12月, 2005 4 次提交
  31. 23 11月, 2005 6 次提交
  33. 22 11月, 2005 2 次提交
  35. 20 11月, 2005 3 次提交
  37. 19 11月, 2005 1 次提交
  39. 18 11月, 2005 1 次提交