When the connections from the pin selector contain only two
widgets, a route to DAC and the aa-mixer, it's certainly a
single connection.  In such a case, get_dac_if_single() should
return the connected DAC, too.

This will improve the detection of the individual DAC
assignment for each pin.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The bitmap introduced in the commit [527e4d73: ALSA: hda/realtek - Fix
missing volume controls with ALC260] is too narrow for some codecs,
which may have more NIDs than 0x20, thus it may overflow the bitmap
array on them.

Just double the number to cover all and also add a sanity-check code
to be safer.

Cc: <stable@kernel.org> [v3.2+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We've enabled the static fixups for ASUS machines with ALC269 codec,
just for making things compatible during the transition to the auto-
parser.  However, it seems that the static configurations do more harmful
than good, as some of entries don't match with the actual hardware setups.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now we can clean up all static quirks for ALC260.
Also many codes in alc_quirks.c can be ripped off since they have been
used only by ALC260 static quirks.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It's working with the auto-parser just with the standard GPIO 1 setup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HP Presario B1900 needs a similar hack like Replacer, toggling GPIO1
per the jack state, in addition to the COEF setup used for other Acer
laptops.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The support for Replacer 627V in the auto-parser needs the unique unsol
event handling: although the machine has a single output pin 0x0f, it's
used for both the headphone and the speaker, and the driver needs to
toggle the output route via GPIO 1.

In addition, it needs a special COEF setup with 0x3050.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The ALC260 model=acer needs GPIO1 setup.  It could be selected well
if the codec SSID is set properly by BIOS, but to make sure, enable it
forcibly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The model=will for ALC260 requires the pin 0x0f to be a headphone and
some special verbs for the COEF to turn on the amp.  Now added these as
fixup entries and removed the static model quirk.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Since 3.2 kernel, the driver starts trying to assign the multi-io DACs
before the speaker, thus it assigns DAC2/3 for multi-io and DAC4 for
the speaker for a standard laptop setup like a HP, a speaker, a mic-in
and a line-in.  However, on Acer Aspire 6935, it seems that the
speaker pin 0x14 must be connected with either DAC1 or 2; otherwise it
results in silence by some reason, although the codec itself allows
the routing to DAC3/4.

As a workaround, the connection list of each pin is reduced to be
mapped to either only DAC1/2 or DAC3/4, so that the compatible
assignment as in kernel 3.1 is achieved.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42740

Cc: <stable@kernel.org> [v3.2+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add the jack-detect suppression for an ASUS machine with ALC892 codec.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42655Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A few machines with ALC861 & co are reported not to work properly with
the auto-mute feature in software.  The auto-mute feature is implemented
in the hardware level, and the jack-detection never works with them.

Also, rename the fixup index as ALC861_FIXUP_* to follow the standard.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This hardware requires same fixup for the node 0x0f like Asus A6Rp.
More information: https://bugzilla.redhat.com/show_bug.cgi?id=785417Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

sparse complains that "spec->multiout.dac_nids" is a pointer.

sound/pci/hda/patch_realtek.c:2321:37: error: incompatible types for operation (>)
sound/pci/hda/patch_realtek.c:2321:37:    left side has type unsigned short const [usertype] *dac_nids
sound/pci/hda/patch_realtek.c:2321:37:    right side has type int

It was meant to be num_dacs instead of dac_nids.
Although the current code still works as expected (when num_dacs is zero,
dac_nids should be NULL, too), better to fix now, of course.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In most cases, the slave strings for vmaster are identical between
volumes and switches except for "xxx Volume" and "xxx Switch" suffix.
Now snd_hda_add_vmaster() takes the optional suffix argument so that
each string can be composed with the given suffix, and we can share the
slave name strings in both volume and switch calls nicely.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The recent changes in Realtek auto-parser added the new "Bass Speaker"
and "CLFE" mixer elements which should be tracked as vmaster slaves,
too.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42720Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The user reports that model=auto works better than current handling
on a 3.2 based kernel (with jack detection patches backported).
Since model=auto is what we prefer these days anyway, the quirk
should be removed.

Alsa-info for the relevant machine:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/923316/+attachment/2702812/+files/alsa-info.txt.Pbfno2x7bp

BugLink: https://bugs.launchpad.net/bugs/923316Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It turned out that other ASUS laptops require the similar fix to
enable the VREF on the pin 0x0f for the secret output amp, not only
ASUS A6Rp.  Moreover, it's required even when the pin is being used
as the output.  Thus, writing a fixed value doesn't work always.

This patch applies the VREF-fix for all ASUS laptops with ALC861/660
in a fixup function that checks the current value and turns on only
the VREF value no matter whether input or output direction is set.

The automute function is modified as well to keep the pin VREF upon
muting/unmuting via pin-control; otherwise the pin VREF is reset at
plugging/unplugging a jack.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42588

Cc: <stable@kernel.org> [v3.2+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The user reports that he needs to add model=auto for audio to
work properly. In fact, since node 0x15 is not even a pin node,
the existing fixup is definitely wrong. Relevant information can
be found in the buglink below.

Cc: stable@kernel.org (3.2+)
BugLink: https://bugs.launchpad.net/bugs/918254Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The very same problem is seen on Haier W18 laptop with ALC861 as seen
on ASUS A6Rp, which was fixed by the commit 3b25eb69.
Now we just need to add a new SSID entry pointing to the same fixup.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42656

Cc: <stable@kernel.org> [v3.2+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The refactoring of Realtek codec driver in 3.2 kernel caused a
regression for ASUS A6Rp laptop; it doesn't give any output.
The reason was that this machine has a secret master mute (or EAPD)
control via NID 0x0f VREF.  Setting VREF50 on this node makes the
sound working again.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42588

Cc: <stable@kernel.org> [v3.2+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Just overlooked.

sound/pci/hda/patch_realtek.c: In function ‘alc_sku_unsol_event’:
sound/pci/hda/patch_realtek.c:643:19: warning: unused variable ‘spec’ [-Wunused-variable]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now that all quirks have the own unsol handlers, we don't need to check
use_jack_tbl flag any more.  Let's kill it.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The recently added jack-kctl support sets the unsol event tags
dynamically, while static quirks usually set the fixed tags in the
init_verbs array.  Due to this conflict, the own unsol event handler
can't retrieve the tag and handle it properly any more.

For fixing this, avoid calling snd_hda_jack_add_kctls() for static
quirks, and always let them use own handlers instead of the standard
one for the auto-pareser.
Reported-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When a machine has multiple speakers, we don't need to create the
controls for multi-ios.  Check the number of primary outputs beforehand.

Note that this workaround might not work always with new codecs in
future; this assumes that both speakers and multi-io jacks share the
same mixers/DACs.  If they are routed with different mixers, the
individual mixer controls should be needed.  But, so far, this doesn't
happen with the existing ALC codecs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This fixup is not actually used, so in practice this is just a
cosmetic fix.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

With the auto-parser we can choose the dac nid for vmaster from
the DACs we already know, instead of hard-coding it. This is more
future-proof and was actually wrong on one machine.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When there are the same or more number of HP pins are available, HP pins
are used as the primary outputs instead of the speaker pins.  But, in
some cases (especially with ALC663 & co), some DACs are available only
with a later pin and it's assigned to a speaker, and since the driver
parses the pins from the lower NID, such a DAC was skipped eventually
without assignments.  This resulted in a regression, the missing speaker
volume control in the new parser.

As a workaround for this, now the driver retries the pin->DAC mapping
again after restoring the speaker-pins as primary.  This is still an ad
hoc fix, but it works so far for most of Realtek codecs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

On systems with two speaker pins, the secondary speaker pin is mostly
assigned to a bass speaker instead of a surround.  Thus it makes more
sense to rename the control properly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The multiple headphone or speaker pins are usually provided to
output the same stream unlike line-out jacks (which are supposed
to be multi-channel surrounds).  Thus giving a mixer name like
"Headphone Surround" is rather confusing.  Instead, when multiple
headphone volumes are available, use index with the same "Headphone"
name.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When no imux is available (e.g. a single capture source),
alc_auto_init_input_src() may trigger an Oops due to the access to -1.
Add a proper zero-check to avoid it.

Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of managing input-jack stuff separately, call all stuff inside
the kctl-jack creation, deletion and report.  The caller no longer needs
to care about input-jack.

The better integration between input-jack and kctl-jack should be done
in the upper layer in near future, but for now, it's implemented locally
for more tests.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use an inline function for the common pattern for assigning a capsrc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the imux entries are rebuilt in alc_rebuild_imux_for_auto_mic(),
the initialization of index field is missing.  It may work without it
casually when the original imux was created by the auto-parser, but
it's definitely broken in the case of static configs where no imux was
parsed beforehand.  Because of this, the auto-mic switching doesn't
work properly on some model options.

This patch adds the missing initialization of index field.
Reported-by: NDmitry Nezhevenko <dion@inhex.net>
Cc: <stable@kernel.org> [v3.1]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We can use the very same table in hda_jack.c for managing the list for
input-jack elements, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Manage the tags assigned for unsolicited events dynamically together
with the jack-detection routines.  Basically this is almost same as what
we've done in patch_sigmatel.c.  Assign the new tag number for each new
unsol event, associate with the given NID and the action type, etc.

With this change, now all pins looked over in snd_hda_jack_add_kctls()
are actually enabled for detection now even if the pins aren't used for
jack-retasking by the driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Create kcontrols for pin jack-detections, which work similarly like
jack-input layer.  Each control will notify when the jack is plugged or
unplugged, and also user can read the value at any time via the normal
control API.

The control elements are created with iface=CARD, so that they won't
appear in the mixer apps.

So far, only the pins that enabled the jack-detection are registered.
For covering all pins, the transition of the common unsol-tag handling
would be needed.  Stay tuned.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Introduce a table containing the pins and their jack-detection states
for avoiding the unnecessary verbs to check the pin status at each time.

When the unsol event is enabled via snd_hda_jack_detect_enable(), it
automatically adds the given NID to the table.  Then the driver supposes
that the codec driver will set the dirty flag appropariately when an
unsolicited event is invoked for that pin.

The behavior for reading other pins that aren't registered in the table
doesn't change.  Only the pins assigned to the table are cached, so far.

In near futre, this table can be extended to use the central place for
the unsolicited events of all pins, etc, and eventually include the
jack-detect kcontrols that replace the current input-jack stuff.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Translate ALC880 medion-rim static configs to the auto-parser with the
additional GPIO2 verb and COEF setup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The ALC882 macpro and imac24 static configs can be transferred to the
auto-parser with the additional GPIO setup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>