- 11 8月, 2008 6 次提交
-
-
由 Paul Mackerras 提交于
It was only used by code in arch/ppc, and arch/ppc is gone, so remove the unused harrier_defs.h as well. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Junio C Hamano 提交于
Back when .gitignore file was added to arch/powerpc/ in 06f2138e ([POWERPC] Add files build to .gitignore, 2006-11-26), there indeed was nothing tracked in the ignored hierarchy and ignoring everything made sense. But we have very many tracked files there these days, and having a higher level .gitignore that ignores everything is asking for future troubles.. This should have been part of b8b572e1 (powerpc: Move include files to arch/powerpc/include/asm, 2008-08-01). Signed-off-by: NJunio C Hamano <gitster@pobox.com> Acked-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Robert P. J. Day 提交于
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
The function htab_bolt_mapping() is used to create permanent mappings in the MMU hash table, for example, in order to create the linear mapping of vmemmap. It's also used by early boot ioremap (before mem_init_done). However, the way ioremap uses it is incorrect as it passes it the protection flags in the "linux PTE" form while htab_bolt_mapping() expects them in the hash table format. This is made more confusing by the fact that some of those flags are actually in the same position in both cases. This fixes it all by making htab_bolt_mapping() take normal linux protection flags instead, and use a little helper to convert them to htab flags. Callers can now use the usual PAGE_* definitions safely. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> arch/powerpc/include/asm/mmu-hash64.h | 2 - arch/powerpc/mm/hash_utils_64.c | 65 ++++++++++++++++++++-------------- arch/powerpc/mm/init_64.c | 9 +--- 3 files changed, 44 insertions(+), 32 deletions(-) Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
When we have an ISA memory hole (ie, a PCI window that allows us to generate PCI memory cycles at low PCI address) mixed with other resources using a different CPU <=> PCI mapping, we must not keep the ISA hole in the bridge resource list. If we do, things might start trying to allocate device resources in there and will get the PCI addresses wrong. This fixes it by arranging to remove the ISA memory hole resource in this case. This fixes various cases of PCMCIA breakage on PowerBooks using the MPC106 "grackle" bridge. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Nathan Fontenot 提交于
The kernel copy of the rtas args struct contains the return value(s) for the specified rtas call. These are copied back to user space with the assumption that every value has been set by the rtas call, which turns out to be not always true. Thus userspace can see random values and think the call failed when in fact it succeeded, but for some reason didn't set one of the return values. This fixes the problem by zeroing out the return value fields of the rtas args struct before processing the rtas call. Signed-off-by: NNathan Fontenot <nfont@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 06 8月, 2008 1 次提交
-
-
由 Josh Boyer 提交于
Update the defconfig files for 4xx boards. This also makes the mutli-board defconfigs a bit more useful by enabling some of the more common modules. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 05 8月, 2008 33 次提交
-
-
由 Sean MacLennan 提交于
FPGA offset in NOR flash was converted incorrectly when switching from 64M to 4M flash. Signed-off-by: NSean MacLennan <smaclennan@pikatech.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Sean MacLennan 提交于
Added support for the new at24 eeprom driver. Documented a new fpga section, the DMA scatter gather list. Removed index from i2c. No longer needed. Fixed the leds section. Signed-off-by: NSean MacLennan <smaclennan@pikatech.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Sean MacLennan 提交于
This patch removes the i2c code which is now obsolete due to the new ibm iic driver walking the device tree for child nodes. There are two other small cleanups that came indirectly from the ad7414 code review. Make sure Tlow is correct and handle the case where i2c_smbus_read_word_data fails. Signed-off-by: NSean MacLennan <smaclennan@pikatech.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Valentine Barshak 提交于
Adjust the NDFC resource end value (resource size = end - start + 1). Signed-off-by: NValentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (29 commits) sh: enable maple_keyb in dreamcast_defconfig. SH2(A) cache update nommu: Provide vmalloc_exec(). add addrespace definition for sh2a. sh: Kill off ARCH_SUPPORTS_AOUT and remnants of a.out support. sh: define GENERIC_HARDIRQS_NO__DO_IRQ. sh: define GENERIC_LOCKBREAK. sh: Save NUMA node data in vmcore for crash dumps. sh: module_alloc() should be using vmalloc_exec(). sh: Fix up __bug_table handling in module loader. sh: Add documentation and integrate into docbook build. sh: Fix up broken kerneldoc comments. maple: Kill useless private_data pointer. maple: Clean up maple_driver_register/unregister routines. input: Clean up maple keyboard driver maple: allow removal and reinsertion of keyboard driver module sh: /proc/asids depends on MMU. arch/sh/boards/mach-se/7343/irq.c: removed duplicated #include arch/sh/boards/board-ap325rxa.c: removed duplicated #include sh/boards/Makefile typo fix ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc: Remove use of CONFIG_PPC_MERGE powerpc: Force printing of 'total_memory' to unsigned long long powerpc: Fix compiler warning in arch/powerpc/mm/mem.c powerpc: Move include files to arch/powerpc/include/asm
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes: kconfig: drop the ""trying to assign nonexistent symbol" warning kconfig: always write out .config
-
由 Roland McGrath 提交于
My last change to tracehook.h made it confuse the kerneldoc parser. Move the #define's before the comment so it's happy again. Signed-off-by: NRoland McGrath <roland@redhat.com> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Mundt 提交于
Platforms that are using GENERIC_BUG must call in to module_bug_finalize()/module_bug_cleanup() in order to scan modules with their own __bug_table sections that are otherwise unaccounted. Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current由 Linus Torvalds 提交于
* 'audit.b56' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: Re: [PATCH] Fix the kernel panic of audit_filter_task when key field is set
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] scsi_transport_spi: fix oops in revalidate [SCSI] ses: fix VPD inquiry overrun [SCSI] block: Fix miscalculation of sg_io timeout in CDROM_SEND_PACKET handler. [SCSI] hptiop: add more PCI device IDs
-
由 Stephen Rothwell 提交于
So copy their contents into the asm-m68k files. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeremy Fitzhardinge 提交于
The "user" parameter to __sched_setscheduler indicates whether the change is being done on behalf of a user process or not. If not, we shouldn't apply any permissions checks, so don't call security_task_setscheduler(). Signed-off-by: NJeremy Fitzhardinge <jeremy@goop.org> Tested-by: NSteve Wise <swise@opengridcomputing.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] move include/asm-s390 to arch/s390/include/asm
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6: pcmcia: rsrc_nonstatic: check value, not pointer
-
由 Alan Cox 提交于
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
drivers/watchdog/wdt_pci.c: In function 'wdtpci_ctr_mode': drivers/watchdog/wdt_pci.c:120: error: implicit declaration of function 'udelay' {standard input}: Assembler messages: Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Kill off use of semaphores. Fix ioctl races and locking holes. From: Alan Cox <alan@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Use unlocked_ioctl Remove semaphores Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
2.6.26 corrected the mutex locking on tty resizing to fix the case where you could get the tty/vt sizing out of sync. That turns out to have a deadlock. The actual fix is really major and I've got it lined up as part of the ops changes for 2.6.28 so for 2.6.26/2.6.27 it is safer to reintroduce this ages old minor bug. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
It now compiles with the tty changes but isn't tested (which has to be better than not compiling.. Closes bug #11218 Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Blackfin peers into the ldisc in an odd way for IRDA snooping which therefore got missed. Simple enough fix. Closes bug #11233 Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/users/dwmw2/random-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/users/dwmw2/random-2.6: drivers/video/console/promcon.c: fix build error Fix IHEX firmware generation/loading
-
由 Willy Tarreau 提交于
snd_seq_oss_synth_make_info() incorrectly reports information to userspace without first checking for the validity of the device number, leading to possible information leak (CVE-2008-3272). Reported-By: NTobias Klein <tk@trapkit.de> Acked-and-tested-by: NTakashi Iwai <tiwai@suse.de> Cc: stable@kernel.org Signed-off-by: NWilly Tarreau <w@1wt.eu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/ISDN-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/ISDN-2.6: Add DIP switch readout for HFC-4S IOB4ST Fix remaining big endian issue of hfcmulti mISDN cleanup user interface mISDN fix main ISDN Makefile
-
由 Huang Weiyi 提交于
Removed duplicated include <linux/smp_lock.h> in drivers/char/efirtc.c. Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 KOSAKI Motohiro 提交于
Halesh says: Please find the below testcase provide to test mlock. Test Case : =========================== #include <sys/resource.h> #include <stdio.h> #include <sys/stat.h> #include <sys/types.h> #include <unistd.h> #include <sys/mman.h> #include <fcntl.h> #include <errno.h> #include <stdlib.h> int main(void) { int fd,ret, i = 0; char *addr, *addr1 = NULL; unsigned int page_size; struct rlimit rlim; if (0 != geteuid()) { printf("Execute this pgm as root\n"); exit(1); } /* create a file */ if ((fd = open("mmap_test.c",O_RDWR|O_CREAT,0755)) == -1) { printf("cant create test file\n"); exit(1); } page_size = sysconf(_SC_PAGE_SIZE); /* set the MEMLOCK limit */ rlim.rlim_cur = 2000; rlim.rlim_max = 2000; if ((ret = setrlimit(RLIMIT_MEMLOCK,&rlim)) != 0) { printf("Cant change limit values\n"); exit(1); } addr = 0; while (1) { /* map a page into memory each time*/ if ((addr = (char *) mmap(addr,page_size, PROT_READ | PROT_WRITE,MAP_SHARED,fd,0)) == MAP_FAILED) { printf("cant do mmap on file\n"); exit(1); } if (0 == i) addr1 = addr; i++; errno = 0; /* lock the mapped memory pagewise*/ if ((ret = mlock((char *)addr, 1500)) == -1) { printf("errno value is %d\n", errno); printf("cant lock maped region\n"); exit(1); } addr = addr + page_size; } } ====================================================== This testcase results in an mlock() failure with errno 14 that is EFAULT, but it has nowhere been specified that mlock() will return EFAULT. When I tested the same on older kernels like 2.6.18, I got the correct result i.e errno 12 (ENOMEM). I think in source code mlock(2), setting errno ENOMEM has been missed in do_mlock() , on mlock_fixup() failure. SUSv3 requires the following behavior frmo mlock(2). [ENOMEM] Some or all of the address range specified by the addr and len arguments does not correspond to valid mapped pages in the address space of the process. [EAGAIN] Some or all of the memory identified by the operation could not be locked when the call was made. This rule isn't so nice and slighly strange. but many people think POSIX/SUS compliance is important. Reported-by: NHalesh Sadashiv <halesh.sadashiv@ap.sony.com> Tested-by: NHalesh Sadashiv <halesh.sadashiv@ap.sony.com> Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Gerard Kam 提交于
For some time my at91sam9260 board with JFFS2 on serial flash (m25p80) would hang when accessing the serial flash and SPI bus. Slowing the SPI clock down to 9 MHz reduced the occurrence of the hang from "always" during boot to a nuisance level that allowed other SW development to continue. Finally had to address this issue when an application stresses the I/O to always cause a hang. Hang seems to be caused by a missed SPI interrupt, so that the task ends up waiting forever after calling spi_sync(). The fix has 2 parts. First is to halt the DMA engine before the "current" PDC registers are loaded. This ensures that the "next" registers are loaded before the DMA operation takes off. The second part of the fix is a kludge that adds a "completion" interrupt in case the ENDRX interrupt for the last segment of the DMA chaining operation was missed. The patch allows the SPI clock for the serial flash to be increased from 9 MHz to 15 MHz (or more?). No hangs or SPI overruns were encountered. Haavard: while this patch does indeed improve things, I still see overruns and CRC errors on my NGW100 board when running the DataFlash at 10 MHz. However, I think some improvement is better than nothing, so I'm passing this on for inclusion in 2.6.27. Signed-off-by: NGerard Kam <gerardk5@verizon.net> Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ben Dooks 提交于
Fix a bug in the spi_s3c24xx driver where it does not reset the registers of the hardware when resuming from suspend (this block has been reset over suspend). Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
This reverts commit f9247273 (and fb2e405f - "fix fs/nfs/nfsroot.c compilation" - that fixed a missed conversion). The changes cause problems for at least the sparc build. Let's re-do them when the exact issues are resolved. Requested-by: NAndrew Morton <akpm@linux-foundation.org> Requested-by: NSteven Whitehouse <swhiteho@redhat.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
This reverts commit 2b142900, since it seems to break some other USB storage devices (at least a JMicron USB to ATA bridge). As such, while it apparently fixes some cardreaders, it would need to be made conditional on the exact reader it fixes in order to avoid causing regressions. Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-