There are only a few users of the DRM_LOG_KMS() macro. We can simplify
the DRM code a bit by replacing them by DRM_DEBUG_KMS().

Cc: Inki Dae <inki.dae@samsung.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This macro was trying to use the non existing DRM_UT_MODE debug category
and looks like it should be covered by DRM_LOG_KMS().
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

That comment wasn't super-readable, so I tried to improve it:

- Put the comment before the values it's documenting
- Add a mention to PRIME
- Reword things a bit to be a lighter read
- Add a note about the option to set the debug value at run-time
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The recently added PTN3460 device driver uses interfaces that
are provided by the KMS helper infrastructure, so we should
explicitly select that to avoid this linker error:

ERROR: "drm_helper_probe_single_connector_modes" [drivers/gpu/drm/bridge/ptn3460.ko] undefined!
ERROR: "drm_helper_connector_dpms" [drivers/gpu/drm/bridge/ptn3460.ko] undefined!

We have to drop the I2C dependency to avoid a circular dependency
chain, but that's ok because DRM already selects I2C.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next

- first stage of (ongoing) gpu fault recovery work
- initial support for maxwell (binary driver fw needed)
- various random fixes across the board

* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (87 commits)
  drm/nouveau: fix missing newline
  drm/nouveau/bios: fetch the vbios from PROM using only aligned 32-bit accesses
  drm/nouveau/therm: let the vbios decide on the automatic fan management mode
  drm/nvd7/therm: handle another kind of PWM fans
  drm/nouveau/pm/fan: drop the fan lock in fan_update() before rescheduling
  drm/nouveau: fix small thinko in vblank timestamping.
  drm/nouveau/therm: check for sensor presence with requested mode, not current
  drm/nouveau/disp/dp: allow 540MHz data rate
  drm/nouveau: recognise higher link rate for available dp bw calculations
  drm/nouveau/disp: limit dp capabilities as per dcb
  drm/nva3/fbram: restrict training pattern setup to GT218
  drm/nva3/devinit: restrict script access to some PFB regs
  drm/nouveau/devinit: add interface to check if a mmio access by scripts is ok
  drm/nouveau/bios: have strap reads show on devinit spam debug level
  drm/nv50/gpio: fixup reset for gpios >= 16
  drm/nv50/gpio: exclude sense value from mask when changing registers
  drm/gk104/gr: therm magic needed on some kepler boards
  drm/gm107/gr: initial support
  drm/gf100-/gf: fix a stupid typo, waiting on wrong signal for mmctx
  drm/nouveau/bios: parsing of some random table needed to bring up gr
  ...

Add a missing newline at the end of a DRM_INFO message.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Reviewed-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Other kind of accesses are unreliable on Kepler cards. As advised by NVIDIA,
let's only use 32-bit accesses to fetch the vbios from PROM.

This fixes vbios fetching on my nve7 which failed in certain specific
conditions.

I suggest we Cc stable, for all kernels they still maintain after the big
rewrite.
Suggested-by: NChristian Zander <czander@nvidia.com>
Signed-off-by: NMartin Peres <martin.peres@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This should fix automatic fan management on fermi cards who do not have
0x46 entries in the thermal table.

On my nve6, the blob sets the default linear range from 40°C to 100°C
but my nvcf's default values are 40°C to 85°C. Let's keep 85 as a default
for everyone.
Signed-off-by: NMartin Peres <martin.peres@labri.fr>
Tested-by: NTimothée Ravier <tim@siosm.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This should fix fan management on many nvd7+ chipsets.
Signed-off-by: NMartin Peres <martin.peres@labri.fr>
Tested-by: NTimothée Ravier <tim@siosm.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This should fix a deadlock that has been reported to us where fan_update()
would hold the fan lock and try to grab the alarm_program_lock to reschedule
an update. On an other CPU, the alarm_program_lock would have been taken
before calling fan_update(), leading to a deadlock.

We should Cc: <stable@vger.kernel.org> # 3.9+
Reported-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Tested-by: NTimothée Ravier <tim@siosm.fr>
Tested-by: Boris Fersing (IRC nick fersingb, no public email address)
Signed-off-by: NMartin Peres <martin.peres@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

*hpos horizontal scanout position doesn't need to be corrected
to count the pixels between hactive end and htotal negative.
That is only needed for *vpos to count lines until end of
vblank for the vblank timestamping.

Use hpos as is without correction.

Removes occassional spikes in timestamps of up to 1 scanline
duration, thereby improves accuracy to about +/- 2 usecs instead
of +/- 12 usecs, wrt. true onset time as measured with high
precision equipment on NV-A5.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76319Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

I should resurrect/merge that cleanup branch to remove the weird
duplication.. One day.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

It doesn't look like the others have the registers.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Shouldn't effect anything, was just momentarily confusing while looking
at traces.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Not needed everywhere, and potentially not safe to do depending on how
the rest of PTHERM is configured...
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Our ucode only partially works at this point, so requiring binary fw
image for now.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This does *not* (and is not intended to) fix the issue reported by
Christoph Rudorff on the nouveau mailinglist.

The patch proposed (which is similar to this one, but also reorders
whether we disable accel or call fb_set_suspend first), papers over
another problem entirely by avoiding touching the framebuffer.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Unit names come from the Android GK20A driver.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Change from traces of a newer binary driver version.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Change from traces of a newer binary driver version.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Bug noticed vs traces.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Differences noted vs traces.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Change from traces of a newer binary driver version.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Bug noticed vs traces.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Prevents an attempt to access VRAM on an un-posted board, which, on a
particular system with a GRID K1 installed, causes a MCE and chokes
the entire system.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>