- 23 3月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Added snd_hda_query_pin_caps() to read and cache pin-cap values to avoid too frequently issuing the same verbs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 3月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
HP laptops require GPIO0 on as EAPD. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 3月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Add the default pin config for model=vaio (in case of broken BIOS). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 3月, 2009 3 次提交
-
-
由 Takashi Iwai 提交于
Also re-ordered the quirk entries per SSID. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Christoph Plattner 提交于
Code rework, comments of mail tiwai@suse.de (2009-03-09) incorporated. Code tested on HP HDX16 (not tested on HDX18 yet). Signed-off-by: NChristoph Plattner <christoph.plattner@gmx.at> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Christoph Plattner 提交于
Added codec recognition of HP HDX platforms and added support of the MUTE LED (orange/white). For this feature the CONFIG_SND_HDA_POWER_SAVE is needed to use event handling for mute control. Signed-off-by: NChristoph Plattner <christoph.plattner@gmx.at> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 06 3月, 2009 6 次提交
-
-
由 Takashi Iwai 提交于
Assign DACs to HP and speaker before mic-in/line-in shared outputs. This improves the usability as it results in more intuitive mixer names. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
In stac92xx_auto_fill_dac_nids[], connect to the primary DAC if no individual DAC is available for each pin. This ensures that the pin works somehow at least. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Create multiple "Headphone" and "Speaker" controls with non-zero index numbers instead of "Headphone2", etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Improve the parser to pick up more intuitive control names for the outputs judging from the pin type, instead of fixed names assigned to channels. Also, revive the multi-HP workaround since this change fixes the problem with the multi-HP detection. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The recent changes over the DAC detection mechanism in patch_sigmatel.c breaks the HP detection on the machines with multiple HP jacks. It's basically because of the workaround to support the multi-channel output. Since the HP detection is more important feature, disable the HP-swap workaroud temporarily. Reference: Novell bnc#482052 https://bugzilla.novell.com/show_bug.cgi?id=482052Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
"Headphone Playback ..." appears twice in slave_vols[] and slave_sws[]. They should be "Headphone Playback2 ..." Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 3月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
Allow more options to be set/reset via hwdep hint entry. hp_detect, gpio_mask, gpio_dir, gpio_data, eapd_mask and eapd_switch can be checked. For example, to disable hp_detect on the fly, # echo "hp_detect=0" > /sys/class/sound/hwC0D0/hints Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Don't create "Analog Loopback" controls as default since these controls are usually more harmful than useful for normal users. Only created when "loopback = yes" hint is given. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 28 2月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Fix num_dmuxes initialization for dell-m4-1 and dell-m4-3 models of IDT 92HD71bxx codec, which was wrongly set to zero. Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 26 2月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Added the model=auto to STAC/IDT codecs to use the BIOS default setup explicitly. It can be used to disable the device-specific model quirk in the driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 20 2月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Removed its own save/restore functions and replaced with the common code. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 2月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
Clean up IDT92HD7x quirks for HP laptops with SND_PCI_QUIRK_MASK(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
Force speaker pin config with model=hp-dv5 model for cases when bios doesn't set it up properly. All reported hp laptops using model=hp-dv5 model have speaker at pin 0x0d with same config, so it's safe to add this within hp-dv5 model. Reference: alsa-devel mailing list thread on http://mailman.alsa-project.org/pipermail/alsa-devel/2009-February/014390.htmlSigned-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 2月, 2009 3 次提交
-
-
由 Takashi Iwai 提交于
Added the helper function snd_hda_multi_out_dig_cleanup() to clean up the digital outputs with multi setup. This call is needed in cases the codec supports multiple digital outputs as slaves. Otherwise the slave widgets aren't properly cleaned up. For a single digital output (e.g. in patch_conexant.c), this call isn't needed. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
Change HP dv7 quirk: although reported to work with hp-m4 model (https://bugzilla.novell.com/show_bug.cgi?id=445321), the original report doesn't contain info about testing of internal microphone. Recently I received a report about internal mic not working (https://qa.mandriva.com/show_bug.cgi?id=44855#c193), this must be related with the forced line in on pin 0x0e done with hp-m4 model. Thus change the current quirk from STAC_HP_M4 to STAC_HP_DV5, later reported to be fixed on a provided kernel with this change (https://qa.mandriva.com/show_bug.cgi?id=44855#c196). Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Matthew Ranostay 提交于
Add STAC_DELL_S14 quirk for new laptop series. Removed un-needed pins in pin_nids for stac92hd83xxx. Also reorganized connection selection code for the respective ports per quirk define. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 2月, 2009 2 次提交
-
-
After commit "ALSA: hda - Fix restore of pin configs at resume for STAC/IDT codecs", the introduced stac_save_pin_cfgs function checks already for pins == NULL case, saving then default pin configs from machine with stac92xx_save_bios_config_regs. So we can remove the extra checks when stac927x_brd_tbl[spec->board_config] == NULL. Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Detect multiple digital-out pins in snd_hda_parse_pin_defconfig(). The dig_out_pin and dig_out_type fields become arrays. The codec parser still doesn't use this multiple pins detection, though. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 2月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Clean up quirk lists with bit masks. Also, sorted in numerical order for alc662_cfg_tbl[]. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 2月, 2009 2 次提交
-
-
When checking for input amps on pins 0x0a, 0x0d and 0x0f, and initializing them for 92hd71xxx codec models, we must skip nid 0x0f for 4-port models too like with 5-port models, as it is unused (nid 0x0f is vendor reserved in 4-port models). Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
This adds a new sound quirk entry (model=ecs202) for an ecs motherboard with IDT STAC9221 codec (1019:2950). Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 05 2月, 2009 4 次提交
-
-
由 Matthew Ranostay 提交于
Added the ADATOut nid to a slave digital outs struct to allow output via the DigOut pin. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
Don't use uneeded/wrong third parameter for stac92xx_parse_auto_config in patch_stac92hd71bxx (no SPDIF in). Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
Detect the number of connected ports and number of smuxes dynamically, looking at pin configs, using new introduced functions stac92hd71bxx_connected_ports and stac92hd71bxx_connected_smuxes. Also use proper input mux configuration for 4port and 5port models. Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
Current code for STAC92HD71Bx and STAC92HD75Bx doesn't consider pin complexes 0x20 and 0x27. Also for 4 port models, nids 0x0e and 0x0f are vendor reserved. This commit changes code so it'll consider the additional pin complexes for models that have it, and avoid reserved nids to be touched on 4 port models. Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 30 1月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Added model=hp-dv5 for another HP dv5 model with AMD chip (103c:3600) Reference: kernel bug#12440 http://bugzilla.kernel.org/show_bug.cgi?id=12440Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 26 1月, 2009 1 次提交
-
-
由 Matthew Ranostay 提交于
Some revisions of the 92hd71xxx codec families don't have input amps on ports 0xa, 0xd and 0xf, so probe the widget caps on port 0xa and check for support, if found run snd_hda_sequence_write_cache() on the stac92hd71xxx_unmute_core_init verb list. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 1月, 2009 7 次提交
-
-
由 Takashi Iwai 提交于
Instead of fixed kcontrol_new element, build "Input Source" controls dynamically. If the number of input-source items is 0 or 1, we don't need to create such a control. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The reference NID for the analog outputs of STAC/IDT codecs is set to a fixed number 0x02. But this isn't always correct and in many codecs it points to a non-existing NID. This patch fixes the initialization of the PCM reference NID taken from the actually probed DAC list. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
An intel board (8086:0204) works only with model=ref. Reference: Novell bug #406529 https://bugzilla.novell.com/show_bug.cgi?id=406529Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Matthew Ranostay 提交于
Add another LanParty reference board SND_PCI_QUIRK to quirk lists of all codec families. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Matthew Ranostay 提交于
Some revisions of the 92hd8xxx codec's not supporting port power downs in which the using of it causes capture and also randomly playback streams to not function at all. Thus by disabling it by default and adding a option to enable it manually will fix all issue on current and future revisions. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Matthew Ranostay 提交于
Port 0xe power mapping was incorrect set to 0x80 changed to the correct value 0x40. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Gateway T1616 laptop needs EAPD always on while the current STAC9205 code turns off per HP plug. Added a new model "eapd" to keep it on. Reference: Novell bnc#467597 https://bugzilla.novell.com/show_bug.cgi?id=467597Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-