- 12 4月, 2017 1 次提交
-
-
由 Subhransu S. Prusty 提交于
Geminilake is Skylake family platform. So add it's id to skl_plus check. Fixes: 126cfa2f ("ALSA: hda: Add Geminilake HDMI codec ID") Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com> Cc: Senthilnathan Veppur <senthilnathanx.veppur@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 4月, 2017 1 次提交
-
-
由 Libin Yang 提交于
On some Intel platforms, the audio clock may not be set correctly with initial setting. This will cause the audio playback/capture rates wrong. This patch checks the audio clock setting and will set it to a proper value if it is set incorrectly. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188411Signed-off-by: NLibin Yang <libin.yang@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 4月, 2017 2 次提交
-
-
由 Takashi Iwai 提交于
Apply the same methods to obtain the current stream position as ASoC Intel SKL driver uses. It reads the position from DPIB for a playback stream while it still reads from the position buffer for a capture stream. For a capture stream, some ugly workaround is needed to settle down the inconsistent position. Acked-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
They may be used by both legacy and ASoC drivers. Acked-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 4月, 2017 1 次提交
-
-
由 Matthias Kaehlcke 提交于
With the previous unsigned long value clang generates warnings like this: sound/pci/hda/patch_ca0132.c:860:37: error: implicit conversion from 'unsigned long' to 'u32' (aka 'unsigned int') changes value from 18446744073709551615 to 4294967295 [-Werror,-Wconstant-conversion] spec->curr_chip_addx = (res < 0) ? ~0UL : chip_addx; ~ ^~~~ Signed-off-by: NMatthias Kaehlcke <mka@chromium.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 31 3月, 2017 1 次提交
-
-
由 Hui Wang 提交于
On this Dell AIO machine, the lineout jack does not work. We found the pin 0x1a is assigned to lineout on this machine, and in the past, we applied ALC298_FIXUP_DELL1_MIC_NO_PRESENCE to fix the heaset-set mic problem for this machine, this fixup will redefine the pin 0x1a to headphone-mic, as a result the lineout doesn't work anymore. After consulting with Dell, they told us this machine doesn't support microphone via headset jack, so we add a new fixup which only defines the pin 0x18 as the headset-mic. [rearranged the fixup insertion position by tiwai in order to make the merge with other branches easier -- tiwai] Fixes: 59ec4b57 ("ALSA: hda - Fix headset mic detection problem for two dell machines") Cc: <stable@vger.kernel.org> Signed-off-by: NHui Wang <hui.wang@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 3月, 2017 1 次提交
-
-
由 Hui Wang 提交于
A new Dell laptop needs to apply ALC269_FIXUP_DELL1_MIC_NO_PRESENCE to fix the headset problem, and the pin definiton of this machine is not in the pin quirk table yet, now adding it to the table. Signed-off-by: NHui Wang <hui.wang@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 20 3月, 2017 3 次提交
-
-
由 Matthias Kaehlcke 提交于
The extra pairs of parantheses are not needed and causes clang to generate warnings like this: sound/pci/hda/patch_ca0132.c:1171:14: error: equality comparison with extraneous parentheses [-Werror,-Wparentheses-equality] if ((buffer == NULL)) ~~~~~~~^~~~~~~ sound/pci/hda/patch_ca0132.c:1171:14: note: remove extraneous parentheses around the comparison to silence this warning if ((buffer == NULL)) ~ ^ ~ sound/pci/hda/patch_ca0132.c:1171:14: note: use '=' to turn this equality comparison into an assignment if ((buffer == NULL)) Signed-off-by: NMatthias Kaehlcke <mka@chromium.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jaroslav Kysela 提交于
This tested patch adds missing initialization for Line-In/Out PINs for the docking station for HP 840 G3. Signed-off-by: NJaroslav Kysela <perex@perex.cz> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jaroslav Kysela 提交于
This tested patch adds missing initialization for Line-In/Out PINs for the docking station for HP 820 G2. Signed-off-by: NJaroslav Kysela <perex@perex.cz> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 3月, 2017 6 次提交
-
-
由 Chris Chiu 提交于
Asus AiO ZN270IE with ALC256 has no audio ouput for internal speaker and headphone. It requires GPIO 2 as an amp. This commit enables the GPIO and pulls it high. Signed-off-by: NChris Chiu <chiu@endlessm.com> Signed-off-by: NDaniel Drake <drake@endlessm.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Chris Chiu 提交于
ASUS X441SA and X441UV laptops with ALC3236 (ALC223) codec require the known fixup (ALC269_FIXUP_HEADSET_MIC) and a different pin value on pin 0x19 to make the headset mic work. To make the speaker work, it requires an EAPD verb fixup. Signed-off-by: NChris Chiu <chiu@endlessm.com> Signed-off-by: NDaniel Drake <drake@endlessm.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Chris Chiu 提交于
Enable jack sensing and fix internal mic and headset mic on Asus X555UB and X540SA. Fix internal mic and headset mic on Asus E402NA and E403NA. Fix headset mic on Asus X541UV, X541SA and Z550SA. Unfortunately jack sensing for the headset mic is still not working. We believe this is a codec limitation. Some of these quirks were authored by João Paulo Rechi Vita. Signed-off-by: NChris Chiu <chiu@endlessm.com> Signed-off-by: NDaniel Drake <drake@endlessm.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Chris Chiu 提交于
Add pin quirks to enable use of the headset mic on Asus Z550MA, X540LA, X540LJ, X556UR, Z450LA, and X441NC. Signed-off-by: NChris Chiu <chiu@endlessm.com> Signed-off-by: NDaniel Drake <drake@endlessm.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Chris Chiu 提交于
The Acer laptop Aspire E5-475 with ALC255 can't detect the headset microphone until we modify a pin definition. Signed-off-by: NChris Chiu <chiu@endlessm.com> Signed-off-by: NDaniel Drake <drake@endlessm.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Dell Inspiron 17 7000 Gaming laptop needs a similar quirk like Inspiron 7599 to support its subwoofer speaker. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=194191 Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 28 2月, 2017 2 次提交
-
-
由 Masahiro Yamada 提交于
Fix typos and add the following to the scripts/spelling.txt: followings||following While we are here, add a missing colon in the boilerplate in DT binding documents. The "you SoC" in allwinner,sunxi-pinctrl.txt was fixed as well. I reworded "as the followings:" to "as follows:" for drivers/usb/gadget/udc/renesas_usb3.c. Link: http://lkml.kernel.org/r/1481573103-11329-32-git-send-email-yamada.masahiro@socionext.comSigned-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vinod Koul 提交于
Geminilake HDMI codec 0x280d is similar to previous platforms, so add it with similar ops as previous. Signed-off-by: NSenthilnathan Veppur <senthilnathanx.veppur@intel.com> Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 27 2月, 2017 1 次提交
-
-
由 Hui Wang 提交于
On this machine, the micmute button is connected to Line2 of the codec and the micmute led is connected to GPIO2 of the codec. After applying this quirk, both hotkey and led work well. Cc: <stable@vger.kernel.org> Signed-off-by: NHui Wang <hui.wang@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 2月, 2017 1 次提交
-
-
由 Vinod Koul 提交于
Geminilake is another Intel part, so need to add PCI ID for it. Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 2月, 2017 1 次提交
-
-
由 Bhumika Goyal 提交于
Declare snd_kcontrol_new structures as const as they are only passed as an argument to the function snd_ctl_new1. This argument is of type const, so snd_kcontrol_new structures having the same property can be made const too. Done using Coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct snd_kcontrol_new i@p = {...}; @ok1@ identifier r1.i; position p; expression e1; @@ snd_ctl_new1(&i@p,e1) @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct snd_kcontrol_new i; Signed-off-by: NBhumika Goyal <bhumirks@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 2月, 2017 3 次提交
-
-
由 Kai-Heng Feng 提交于
The issue is the same as "dd9aa335 ALSA: hda/realtek - Can't adjust speaker's volume on a Dell AIO", the output requires to connect to a node with Amp-out capability. Applying the same fixup "ALC298_FIXUP_SPK_VOLUME" can fix the issue. Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jaroslav Kysela 提交于
It seems that newer Intel chipsets have more than 15 I/O streams (total). This patch forces the separate stream tags, when this hardware is detected to avoid SDxCTL.STRM field overflow and an unexpected behaviour. Signed-off-by: NJaroslav Kysela <perex@perex.cz> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jaroslav Kysela 提交于
Like for Sunrise Point, the total stream number of Lewisburg's input and output stream exceeds 15 (GCAP is 0x9701), which will cause some streams do not work because of the overflow on SDxCTL.STRM field if using the legacy stream tag allocation method. Fixes: 5cf92c8b ("ALSA: hda - Add Intel Lewisburg device IDs Audio") Signed-off-by: NJaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 2月, 2017 1 次提交
-
-
由 Darren Stevens 提交于
The AmigaOne X1000 has a Sigmatel STAC92HD700 attached to the HD Audio on an ATI SB600. Add the required settings to enable sound. Signed-off-by: NDarren Stevens <darren@stevens-zone.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 2月, 2017 1 次提交
-
-
由 Hui Wang 提交于
Without this change, the HDMI/DP codec will be recognised as a generic codec, and there is no sound when playing through this codec. As suggested by NVidia side, after adding the new ID in the driver, the sound playing works well. Cc: <stable@vger.kernel.org> Signed-off-by: NHui Wang <hui.wang@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 18 1月, 2017 1 次提交
-
-
由 Kailang Yang 提交于
ALC221 HP platform need to support Headphone Mic. This patch will turn on headphone Mic supported. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 1月, 2017 1 次提交
-
-
由 Kailang Yang 提交于
Add support for new codec of ALC1220. It's compatible with ALC882 & co. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 15 1月, 2017 1 次提交
-
-
由 Takashi Iwai 提交于
HD-audio driver has a mechanism to fall back to the single cmd mode as a last resort if the CORB/RIRB communication goes wrong even after switching to the polling mode. The switching has worked in the past well, but Enrico Mioso reported that his system crashes when this happens. Although the actual cause of the crash isn't still fully analyzed yet, it'd be in anyway good to provide an option to turn off the fallback mode. Now this patch extends the behavior of the existing single_cmd option for that. Namely, - The option is changed from bool to bint. - As default, it is the mode allowing the fallback to single cmd. - Once when either true/false value is given to the option, the driver explicitly turns on/off the single cmd mode, but without the fallback. That is, if you want to disable the fallback, just pass single_cmd=0 option. Passing single_cmd=1 will keep working like before. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 1月, 2017 3 次提交
-
-
由 Libin Yang 提交于
This patch adds the DP MST audio support on i915 platform and it will enable dyn_pcm_assign feature. DP MST supports several device entry on the same port and each device entry can map to one pcm stream. For example, on i915, there are 3 pins, and each pin has 3 device entries. This means there should be 3x3 pcms. However, there is only 3 pipe lines in i915. This means 3 pcms are actived at most at the same moment. We will create 5 pcms (pin number + dev entry num - 1) in this case. For the details, please refer commit a76056f2 ("ALSA: hda - hdmi dynamically bind PCM to pin when monitor hotplug") Each device entry is a virtual pin. It is described by pin_nid and dev_id in struct hdmi_spec_per_pin. Reviewed-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NLibin Yang <libin.yang@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1484208294-8637-3-git-send-email-libin.yang@intel.com
-
由 Libin Yang 提交于
Add snd_hda_get_dev_select() and snd_hda_set_dev_select() functions for DP MST audio support. Reviewed-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NLibin Yang <libin.yang@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1484208294-8637-2-git-send-email-libin.yang@intel.com
-
由 Arnd Bergmann 提交于
gcc-7 caught what it considers a NULL pointer dereference: sound/pci/hda/patch_ca0132.c: In function 'dspio_scp.constprop': sound/pci/hda/patch_ca0132.c:1487:4: error: argument 1 null where non-null expected [-Werror=nonnull] This is plausible from looking at the function, as we compare 'reply' to NULL earlier in it. I have not tried to analyze if there are constraints that make it impossible to hit the bug, but adding another NULL check in the end kills the warning and makes the function more robust. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 05 1月, 2017 1 次提交
-
-
由 Takashi Iwai 提交于
Although the old quirk table showed ASUS X71SL with ALC663 codec being compatible with asus-mode3 fixup, the bugzilla reporter explained that asus-model8 fits better for the dual headphone controls. So be it. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=191781 Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 1月, 2017 3 次提交
-
-
由 Takashi Iwai 提交于
ASUS ROG Ranger VIII with ALC1150 codec requires the extra GPIO pin to up for the front panel. Just use the existing fixup for setting up the GPIO pins. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=189411 Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Imre Deak reported a deadlock of HD-audio driver at unbinding while it's still in probing. Since we probe the codecs asynchronously in a work, the codec driver probe may still be kicked off while the controller itself is being unbound. And, azx_remove() tries to process all pending tasks via cancel_work_sync() for fixing the other races (see commit [0b8c8219: ALSA: hda - Cancel probe work instead of flush at remove]), now we may meet a bizarre deadlock: Unbind snd_hda_intel via sysfs: device_release_driver() -> device_lock(snd_hda_intel) -> azx_remove() -> cancel_work_sync(azx_probe_work) azx_probe_work(): codec driver probe() -> __driver_attach() -> device_lock(snd_hda_intel) This deadlock is caused by the fact that both device_release_driver() and driver_probe_device() take both the device and its parent locks at the same time. The codec device sets the controller device as its parent, and this lock is taken before the probe() callback is called, while the controller remove() callback gets called also with the same lock. In this patch, as an ugly workaround, we unlock the controller device temporarily during cancel_work_sync() call. The race against another bind call should be still suppressed by the parent's device lock. Reported-by: NImre Deak <imre.deak@intel.com> Fixes: 0b8c8219 ("ALSA: hda - Cancel probe work instead of flush at remove") Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
ALC299 was similar as ALC225. Add headset support for ALC299. ALC3271 was for Dell rename. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 28 12月, 2016 2 次提交
-
-
由 Gabriele Mazzotta 提交于
The Samsung Ativ Book 8 makes a loud click noise on boot, shutdown and when the audio card enters or exits power saving states. All these noises disappear applying ALC269_FIXUP_NO_SHUTUP. In addition to that, fix the loud click noise that the laptop makes when inserting or removing the headphone jack by automuting via amp instead of pinctl. Signed-off-by: NGabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Gabriele Mazzotta 提交于
Setting shutup when the action is HDA_FIXUP_ACT_PRE_PROBE might not have the desired effect since it could be overridden by another more generic shutup function. Prevent this by setting the more specific shutup function on HDA_FIXUP_ACT_PROBE. Signed-off-by: NGabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 06 12月, 2016 2 次提交
-
-
由 Takashi Iwai 提交于
HP Z1 Gen3 AiO with Conexant codec doesn't give an unsolicited event to the headset mic pin upon the jack plugging, it reports only to the headphone pin. It results in the missing mic switching. Let's fix up by simply gating the jack event. Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kai-Heng Feng 提交于
Commit [64047d7f ALSA: hda - ignore the assoc and seq when comparing pin configurations] intented to ignore both seq and assoc at pin comparing, but it only ignored seq. So that commit may still fail to match pins on some machines. Change the bitmask to also ignore assoc. v2: Use macro to do bit masking. Thanks to Hui Wang for the analysis. Fixes: 64047d7f ("ALSA: hda - ignore the assoc and seq when comparing...") Signed-off-by: NKai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-