Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 13 11月, 2014 19 次提交
  3. 12 11月, 2014 3 次提交
    • D
      drm: More specific locking for get* ioctls · fcf93f69
      由 Daniel Vetter 提交于 
      Motivated by the per-plane locking I've gone through all the get*
ioctls and reduced the locking to the bare minimum required.

v2: Rebase and make it compile ...

v3: Review from Sean:
- Simplify return handling in getplane_res.
- Add a comment to getplane_res that the plane list is invariant and
  can be walked locklessly.

v4: Actually git add.

Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>
      fcf93f69
    • D
      drm: Per-plane locking · 4d02e2de
      由 Daniel Vetter 提交于 
      Turned out to be much simpler on top of my latest atomic stuff than
what I've feared. Some details:

- Drop the modeset_lock_all snakeoil in drm_plane_init. Same
  justification as for the equivalent change in drm_crtc_init done in

	commit d0fa1af4
	Author: Daniel Vetter <daniel.vetter@ffwll.ch>
	Date:   Mon Sep 8 09:02:49 2014 +0200

	    drm: Drop modeset locking from crtc init function

  Without these the drm_modeset_lock_init would fall over the exact
  same way.

- Since the atomic core code wraps the locking switching it to
  per-plane locks was a one-line change.

- For the legacy ioctls add a plane argument to the locking helper so
  that we can grab the right plane lock (cursor or primary). Since the
  universal cursor plane might not be there, or someone really crazy
  might forgoe the primary plane even accept NULL.

- Add some locking WARN_ON to the atomic helpers for good paranoid
  measure and to check that it all works out.

Tested on my exynos atomic hackfest with full lockdep checks and ww
backoff injection.

v2: I've forgotten about the load-detect code in i915.

v3: Thierry reported that in latest 3.18-rc vmwgfx doesn't compile any
more due to

commit 21e88620
Author: Rob Clark <robdclark@gmail.com>
Date:   Thu Oct 30 13:39:04 2014 -0400

    drm/vmwgfx: fix lock breakage

Rebased and fix this up.

Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>
      4d02e2de
    • R
      drm: export atomic wait_for_vblanks helper (v2) · 5ee3229c
      由 Rob Clark 提交于 
      v1: original
v2: danvet's kerneldoc nitpicks
Signed-off-by: NRob Clark <robdclark@gmail.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>
      5ee3229c
  5. 10 11月, 2014 1 次提交
  7. 08 11月, 2014 6 次提交
  9. 07 11月, 2014 11 次提交
    • D
      drm: drop README.drm, ancient scrolls · 5fa2704e
      由 Dave Airlie 提交于 
      This stuff is ancient, we have docs now in the kernel,
lets just drop it.

Pointed out by Glenn
Reviewed-by: NThierry Reding <treding@nvidia.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>
      5fa2704e
    • J
      USB: cdc-acm: add quirk for control-line state requests · 2a8cdfde
      由 Johan Hovold 提交于 
      Add new quirk for devices that cannot handle control-line state
requests.

Note that we currently send these requests to all devices, regardless of
whether they claim to support it, but that errors are only logged if
support is claimed.

Since commit 0943d8ea ("USB: cdc-acm: use tty-port dtr_rts"), which
only changed the timings for these requests slightly, this has been
reported to cause occasional firmware crashes on Simtec Electronics
Entropy Key devices after re-enumeration. Enable the quirk for this
device.
Reported-by: NNix <nix@esperi.org.uk>
Tested-by: NNix <nix@esperi.org.uk>
Cc: stable <stable@vger.kernel.org>	# v3.16
Signed-off-by: NJohan Hovold <johan@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2a8cdfde
    • F
      tty: Fix pty master poll() after slave closes v2 · c4dc3046
      由 Francesco Ruggeri 提交于 
      Commit f95499c3 ("n_tty: Don't wait for buffer work in read() loop")
introduces a race window where a pty master can be signalled that the pty
slave was closed before all the data that the slave wrote is delivered.
Commit f8747d4a ("tty: Fix pty master read() after slave closes") fixed the
problem in case of n_tty_read, but the problem still exists for n_tty_poll.
This can be seen by running 'for ((i=0; i<100;i++));do ./test.py ;done'
where test.py is:

import os, select, pty

(pid, pty_fd) = pty.fork()

if pid == 0:
   os.write(1, 'This string should be received by parent')
else:
   poller = select.epoll()
   poller.register( pty_fd, select.EPOLLIN )
   ready = poller.poll( 1 * 1000 )
   for fd, events in ready:
      if not events & select.EPOLLIN:
         print 'missed POLLIN event'
      else:
         print os.read(fd, 100)
   poller.close()

The string from the slave is missed several times.
This patch takes the same approach as the fix for read and special cases
this condition for poll.
Tested on 3.16.
Signed-off-by: NFrancesco Ruggeri <fruggeri@arista.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c4dc3046
    • D
      drm/atomic: Refcounting for plane_state->fb · 321ebf04
      由 Daniel Vetter 提交于 
      So my original plan was that the drm core refcounts framebuffers like
with the legacy ioctls. But that doesn't work for a bunch of reasons:

- State objects might live longer than until the next fb change
  happens for a plane. For example delayed cleanup work only happens
  _after_ the pageflip ioctl has completed. So this definitely doesn't
  work without the plane state holding its own references.

- The other issue is transition from legacy to atomic implementations,
  where the driver works under a mix of both worlds. Which means
  legacy paths might not properly update the ->fb pointer under
  plane->state->fb. Which is a bit a problem when then someone comes
  around and _does_ try to clean it up when it's long gone.

The second issue is just a bit a transition bug, since drivers should
update plane->state->fb in all the paths that aren't converted yet.
But a bit more robustness for the transition can't hurt - we pull
similar tricks with cleaning up the old fb in the transitional helpers
already.

The pattern for drivers that transition is

	if (plane->state)
		drm_atomic_set_fb_for_plane(plane->state, plane->fb);

inserted after the fb update has logically completed at the end of
->set_config (or ->set_base/mode_set if using the crtc helpers),
->page_flip, ->update_plane or any other entry point which updates
plane->fb.

v2: Update kerneldoc - copypasta fail.

v3: Fix spelling in the commit message (Sean).
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
      321ebf04
    • D
      drm: Docbook integration and over sections for all the new helpers · 3150c7d0
      由 Daniel Vetter 提交于 
      In all cases the text requires that new drivers are converted to the
atomic interfaces.

v2: Add overview for state handling.

v3: Review from Sean: Some spelling fixes and drop the misguided
hunk to remove rgba8888 from the plane helpers compat list.

Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      3150c7d0
    • D
      drm/atomic-helpers: functions for state duplicate/destroy/reset · d461701c
      由 Daniel Vetter 提交于 
      The atomic users and helpers assume that there is always a obj->state
structure around. Which means drivers need to somehow create that at
driver load time. Also it should obviously reset hardware state, so
needs to be reset upon resume.

Finally the destroy/duplicate_state functions are an awful lot of
boilerplate if the driver doesn't need anything beyond the default
state objects.

So add helper functions for all of this.

v2: Somehow the plane/connector versions got lost in the first
version.

v3: Add kerneldoc.

v4: Make duplicate_state functions a bit more robust, which is useful
for debugging state tracking issues when transitioning to atomic.

v5: Clear temporary variables in the crtc state when duplicating it,
like ->mode_changed or ->planes_changed. If we don't do this stale
values for these might pollute the next atomic modeset.

v6: Also clear crtc_state->event in case the driver didn't (yet) clear
this out.

v7: Split out wrong squashed commit. Also improve the kerneldoc to
mention that obj->state can be NULL and when.  Both suggested by
Daniel Thompson.

Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      d461701c
    • D
      drm/atomic-helper: implement ->page_flip · 8bc0f312
      由 Daniel Vetter 提交于 
      Currently there is no way to implement async flips using atomic, that
essentially requires us to be able to cancel pending requests
mid-flight.

To be able to do that (and I guess we want this since vblank synced
updates which opportunistically cancel still pending updates seem to be
wanted) we'd need to add a mandatory cancellation mode. Depending upon
the exact semantics we decide upon that could mean that userspace will
not get completion events, or will get them all stacked up.

So reject async updates for now. Also async updates usually means not
vblank synced at all, and I guess for drivers which want to support
this they should simply add a special pageflip handler (since usually
you need a special flip cmd to achieve this). That kind of async flip
is pretty much exclusively just used for games and benchmarks where
dropping just one frame means you'll get a headshot or something bad
like that ... And so slight amounts of tearing is acceptable.

v2: Fixup kerneldoc, reported by Paulo.

v3: Use the set_crtc_for_plane function to assign the crtc, since
otherwise the book-keeping is off.

v4: Update crtc->primary->fb since ->page_flip is the only driver
callback where the core won't do this itself. We might want to fix
this inconsistency eventually.

v5: Use set_crtc_for_connector as suggested by Sean.

v6: Daniel Thompson noticed that my error handling is inconsistent
and that in a few cases I didn't handle fatal errors (i.e. not
-EDEADLK). Fix this by consolidate the ww mutex backoff handling
into one check in the fail: block and flatten the error control
flow everywhere else.

v7: Fix spelling mistake in the commit message (Sean).

Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      8bc0f312
    • D
      drm/atomic-helpers: document how to implement async commit · e8c833a7
      由 Daniel Vetter 提交于 
      No helper function to do it all yet provided since no driver has
support for driver core fences yet. Which we'd need to make the
implementation really generic.

v2: Clarify async howto a bit per the discussion With Rob Clark.

Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      e8c833a7
    • D
      drm/atomic: Integrate fence support · e2330f07
      由 Daniel Vetter 提交于 
      This patch is for enabling async commits. It replaces an earlier
approach which added an async boolean paramter to the ->prepare_fb
callbacks. The idea is that prepare_fb picks up the right fence to
synchronize against, which is then used by the synchronous commit
helper. For async commits drivers can either register a callback to
the fence or simply do the synchronous wait in their async work queue.

v2: Remove unused variable.

v3: Only wait for fences after the point of no return in the part
of the commit function which can be run asynchronously. This is after
the atomic state has been swapped in, hence now check
plane->state->fence.

Also add a WARN_ON to make sure we don't try to wait on a fence when
there's no fb, just as a sanity check.
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
      e2330f07
    • D
      drm/atomic-helper: implementatations for legacy interfaces · 042652ed
      由 Daniel Vetter 提交于 
      Well, except page_flip since that requires async commit, which isn't
there yet.

For the functions which changes planes there's a bit of trickery
involved to keep the fb refcounting working. But otherwise fairly
straight-forward atomic updates.

The property setting functions are still a bit incomplete. Once we
have generic properties (e.g. rotation, but also all the properties
needed by the atomic ioctl) we need to filter those out and parse them
in the helper. Preferrably with the same function as used by the real
atomic ioctl implementation.

v2: Fixup kerneldoc, reported by Paulo.

v3: Add missing EXPORT_SYMBOL.

v4: We need to look at the crtc of the modeset, not some random
leftover one from a previous loop when udpating the connector->crtc
routing. Also push some local variables into inner loops to avoid
these kinds of bugs.

v5: Adjust semantics - drivers now own the atomic state upon
successfully synchronous commit.

v6: Use the set_crtc_for_plane function to assign the crtc, since
otherwise the book-keeping is off.

v7:
- Improve comments.
- Filter out the crtc of the ->set_config call when recomputing
  crtc_state->enabled: We should compute the same state, but not doing
  so will give us a good chance to catch bugs and inconsistencies -
  the atomic helper's atomic_check function re-validates this again.
- Fix the set_config implementation logic when disabling the crtc: We
  still need to update the output routing to disable all the
  connectors properly in the state. Caught by the atomic_check
  functions, so at least that part worked ;-) Also add some WARN_ONs
  to ensure ->set_config preconditions all apply.

v8: Fixup an embarrassing h/vdisplay mixup.

v9: Shuffled bad squash to the right patch, spotted by Daniel

v10: Use set_crtc_for_connector as suggested by Sean.

v11: Daniel Thompson noticed that my error handling is inconsistent
and that in a few cases I didn't handle fatal errors (i.e. not
-EDEADLK). Fix this by consolidate the ww mutex backoff handling
into one check in the fail: block and flatten the error control
flow everywhere else.

v12: Review and discussion with Sean:
- One spelling fix.
- Correctly skip the crtc from the set_config set when recomputing
  ->enable state. That should allow us to catch any bugs in higher
  levels in computing that state (which is supplied to the
  ->set_config implementation). I've screwed this up and Sean spotted
  that the current code is pointless.

Cc: Sean Paul <seanpaul@chromium.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      042652ed
    • D
      drm: Atomic crtc/connector updates using crtc/plane helper interfaces · 623369e5
      由 Daniel Vetter 提交于 
      So this is finally the integration of the crtc and plane helper
interfaces into the atomic helper functions.

In the check function we now have a few steps:

- First we update the output routing and figure out which crtcs need a
  full mode set. Suitable encoders are selected using ->best_encoder,
  with the same semantics as the crtc helpers of implicitly disabling
  all connectors currently using the encoder.

- Then we pull all other connectors into the state update which feed
  from a crtc which changes. This must be done do catch mode changes
  and similar updates - atomic updates are differences on top of the
  current state.

- Then we call all the various ->mode_fixup to compute the adjusted
  mode. Note that here we have a slight semantic difference compared
  to the crtc helpers: We have not yet updated the encoder->crtc link
  when calling the encoder's ->mode_fixup function. But that's a
  requirement when converting to atomic since we want to prepare the
  entire state completely contained with the over drm_atomic_state
  structure. So this must be carefully checked when converting drivers
  over to atomic helpers.

- Finally we do call the atomic_check functions on planes and crtcs.

The commit function is also quite a beast:

- The only step that can fail is done first, namely pinning the
  framebuffers. After that we cross the point of no return, an async
  commit would push all that into the worker thread.

- The disabling of encoders and connectors is a bit tricky, since
  depending upon the final state we need to select different crtc
  helper functions.

- Software tracking is a bit clarified compared to the crtc helpers:
  We commit the software state before starting to touch the hardware,
  like crtc helpers. But since we just swap them we still have the old
  state (i.e. the current hw state) around, which is really handy to
  write simple disable functions. So no more
  drm_crtc_helper_disable_all_unused_functions kind of fun because
  we're leaving unused crtcs/encoders behind. Everything gets shut
  down in-order now, which is one of the key differences of the i915
  helpers compared to crtc helpers and a really nice additional
  guarantee.

- Like with the plane helpers the atomic commit function waits for one
  vblank to pass before calling the framebuffer cleanup function.

Compared to Rob's helper approach there's a bunch of upsides:

- All the interfaces which can fail are called in the ->check hook
  (i.e. ->best_match and the various ->mode_fixup hooks). This means
  that drivers can just reuse those functions and don't need to move
  everything into ->atomic_check callbacks. If drivers have no need
  for additional constraint checking beyong their existing crtc
  helper callbacks they don't need to do anything.

- The actual commit operation is properly stage: First we prepare
  framebuffers, which can potentially still fail (due to memory
  exhausting). This is important for the async case, where this must
  be done synchronously to correctly return errors.

- The output configuration changes (done with crtc helper functions)
  and the plane update (using atomic plane helpers) are correctly
  interleaved: First we shut down any crtcs that need changing, then
  we update planes and finally we enable everything again. Hardware
  without GO bits must be more careful with ordering, which this
  sequence enables.

- Also for hardware with shared output resources (like display PLLs)
  we first must shut down the old configuration before we can enable
  the new one. Otherwise we can hit an impossible intermediate state
  where there's not enough PLLs (which is the point behind atomic
  updates).

v2:
- Ensure that users of ->check update crtc_state->enable correctly.
- Update the legacy state in crtc/plane structures. Eventually we want
  to remove that, but for now the drm core still expects this (especially
  the plane->fb pointer).

v3: A few changes for better async handling:

- Reorder the software side state commit so that it happens all before
  we touch the hardware. This way async support becomes very easy
  since we can punt all the actual hw touching to a worker thread. And
  as long as we synchronize with that thread (flushing or cancelling,
  depending upon what the driver can handle) before we commit the next
  software state there's no need for any locking in the worker thread
  at all. Which greatly simplifies things.

  And as long as we synchronize with all relevant threads we can have
  a lot of them (e.g. per-crtc for per-crtc updates) running in
  parallel.

- Expose pre/post plane commit steps separately. We need to expose the
  actual hw commit step anyway for drivers to be able to implement
  asynchronous commit workers. But if we expose pre/post and plane
  commit steps individually we allow drivers to selectively use atomic
  helpers.

- I've forgotten to call encoder/bridge ->mode_set functions, fix
  this.

v4: Add debug output and fix a mixup between current and new state
that resulted in crtcs not getting updated correctly. And in an
Oops ...

v5:
- Be kind to driver writers in the vblank wait functions.. if thing
  aren't working yet, and vblank irq will never come, then let's not
  block forever.. especially under console-lock.
- Correctly clear connector_state->best_encoder when disabling.
  Spotted while trying to understand a report from Rob Clark.
- Only steal encoder if it actually changed, otherwise hilarity ensues
  if we steal from the current connector and so set the ->crtc pointer
  unexpectedly to NULL. Reported by Rob Clark.
- Bail out in disable_outputs if an output currently doesn't have a
  best_encoder - this means it's already disabled.

v6: Fixupe kerneldoc as reported by Paulo. And also fix up kerneldoc
in drm_crtc.h.

v7: Take ownership of the atomic state and clean it up with
drm_atomic_state_free().

v8 Various improvements all over:
- Polish code comments and kerneldoc.
- Improve debug output to make sure all failure cases are logged.
- Treat enabled crtc with no connectors as invalid input from userspace.
- Don't ignore the return value from mode_fixup().

v9:
- Improve debug output for crtc_state->mode_changed.

v10:
- Fixup the vblank waiting code to properly balance the vblank_get/put
  calls.
- Better comments when checking/computing crtc->mode_changed

v11: Fixup the encoder stealing logic: We can't look at encoder->crtc
since that's not in the atomic state structures and might be updated
asynchronously in and async commit. Instead we need to inspect all the
connector states and check whether the encoder is currently in used
and if so, on which crtc.

v12: Review from Sean:
- A few spelling fixes.
- Flatten control flow indent by converting if blocks to early
  continue/return in 2 places.
- Capture connectors_for_crtc return value in int num_connectors
  instead of bool has_connectors and do an explicit int->bool
  conversion with !!. I think the helper is more useful for drivers if
  it returns the number of connectors (e.g. to detect cloning
  configurations), so decided to keep that return value.

Cc: Sean Paul <seanpaul@chromium.org>
Cc: Paulo Zanoni <przanoni@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
      623369e5