scsi_add_host is the proper place to set the device, but people copy
the scsi_set_device usage from older drivers again and again.

note that this leaves some legacy drivers like qlogicisp/qlogicfc
without pci association in sysfs, but they're scheduled to go away soon
anyway.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Use ssleep() instead of schedule_timeout to guarantee the task
delays as expected.
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: NDomen Puncer <domen@coderock.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This patch removes version.h dependencies.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch contains the following cleanups:
- make needlessly global code static
- remove or #if 0 the following unused functions:
  - tul_pop_pend_scb
  - tul_device_reset
  - tul_reset_scsi_bus
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Another rollup of patches which give various symbols static scope
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The driver plays with waitqueue internals and fails to compile after Ben's
"aio: make wait_queue ->task ->private" patch.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

[PATCH] Driver Core: drivers/s390/net/qeth_sys.c - drivers/usb/gadget/pxa2xx_udc.c: update device attribute callbacks
Signed-off-by: NYani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NPatrick Mochel <mochel@digitalimplant.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Index: gregkh-2.6/drivers/scsi/scsi_sysfs.c
===================================================================

Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The fixes for sparse warnings mixed in with the fixups for
the raw_srb handler resulted in a bug that showed up in the 32 bit
environments when trying to issue calls directly to the physical devices
that are part of the arrays (ioctl scsi passthrough).

Received from Mark Salyzyn at adaptec.
Applied comment from Christoph to remove cpu_to_le32(0)
Applied Mark S fix of missing memcpy.
It applies to the scsi-misc-2.6 git tree.
Signed-off-by: NMark Haverkamp <markh@osdl.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Drivers need not implement a hook that returns FAILED, and does nothing
else, since the SCSI midlayer code will do that for us.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

The SCSI ->done() hook should not be called from inside a spinlock.

Drivers that do this are mostly cut-n-paste from 2.2.x-era.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Following the go around over the SONY DVD that needs artificial limits,
this should be the correct code for all cases (minus the debugging
prints).
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

M68k: Mark Sun-3 NCR5380 SCSI broken until NCR5380_abort() and
NCR5380_bus_reset() are replaced with real new-style EH routines (the old EH
SCSI constants were removed in 2.6.12-rc3).
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

 - the eisa layer only probes when it's actually safe, no need for
   a driver option
 - store the id table directly in linux format instead of convering
   at runtime
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

especially the now dead scsi_cmnd overlay
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

there's absolutely no reason not to trust the driver private data
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

pci layer handles this just fine for us
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Return to previous held-logic of calling scsi_add_host() only
after the board has been completely initialized.  Also return
pci_*() error-codes during probe failure paths.

This also corrects an issue where only lun 0 is being scanned for
a given port.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Problem:
Incorrect md5sum when using ATAPI PIO mode to verify a distro CD.

Root cause:  sg traverse problem.
In __atapi_pio_bytes(), if qc->cursg++ is increased and "goto
next_page" is executed, then sg is not updated to the new qc->cursg
and the old sg is overwritten with the new data.

Changes:
- Replace "goto next_page" with "goto next_sg" to make sg updated.
Signed-off-by: NAlbert Lee <albertcc@tw.ibm.com>

Bump sata_svw.c version number to indicate support for BCM5785(HT1000)
Southbridge SATA controller.
Signed-off-by: NNarendra Sankar <nsankar@broadcom.com>

diff -uNr linux-2.6.12-rc5/drivers/scsi/sata_svw.c linux-2.6.12-rc5.brcm/drivers/scsi/sata_svw.c

Correct this.

diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c

Replace 'have_msi' variable with a bit in the existing 'flags' variable,.
AHCI_FLAG_MSI.

This patch adds some files into the /sys/class/scsi_host/hostN
directories for aacraid adapters:

model
vendor
hba_kernel_version
hba_monitor_version
hba_bios_version
serial_number
Signed-off-by: NMark Haverkamp <markh@osdl.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

There are several extra things that have to be considered when running
Domain Validation on a u320 target (notably how you fall back).

Hopefully this should help us when someone adds this transport class to
aic79xx.

I've tested this on the lsi1030, so I know it works correctly up to
u320.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

For setting coupled parameters, we need to be comparing against the goal
settings, not the current ones.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

A problem exists todayin the sg driver that if an SG_IO request is
outstanding to a device when it is removed from the system. The
system may oops if that command completes later in time.

1. sg_remove gets called
2. sg_remove calls sg_finish_req_req on all pending requests
   This removes the Sg_request's from the headrp list in the Sg_fd
3. The sleeping SG_IO ioctl is woken. It does nothing and returns.
4. The caller closes the fd, which invokes sg_release
5. sg_release calls sg_remove_sfp. It finds no outstanding commands
   since the headrp list is empty, so it calls __sg_remove_sfp,
   which frees the sfp.
6. Now when sg_cmd_done gets called, sg uses upper_private_data in
   the Scsi_Request, which should point to the srp, which has been
   freed, so it points to freed memory.
7. sg then dereferences the srp pointer to get the sfp, and we oops.

The fix is to NULL out the upper_private_data field in this path,
which sg_cmd_done already checks for, which will prevent the oops
from occurring.

cpu 0x1: Vector: 300 (Data Access) at [c00000000fff7aa0]
    pc: d0000000002bbea8: .sg_cmd_done+0x70/0x394 [sg]
    lr: d000000000073304: .scsi_finish_command+0x10c/0x130 [scsi_mod]
    sp: c00000000fff7d20
   msr: 8000000000009032
   dar: 2f70726f63202f78
 dsisr: 40000000
  current = 0xc0000000024589b0
  paca    = 0xc0000000003da800
    pid   = 7, comm = events/1
[c00000000fff7dc0] d000000000073304 .scsi_finish_command+0x10c/0x130 [scsi_mod]
[c00000000fff7e50] d00000000007317c .scsi_softirq+0x140/0x168 [scsi_mod]
[c00000000fff7ef0] c0000000000634dc .__do_softirq+0xa0/0x17c
[c00000000fff7f90] c000000000018430 .call_do_softirq+0x14/0x24
[c00000000ed472e0] c0000000000142e0 .do_softirq+0x74/0x9c
[c00000000ed47370] c000000000013c9c .do_IRQ+0xe8/0x100
[c00000000ed473f0] c00000000000ae34 HardwareInterrupt_entry+0x8/0x54

c00000000003df28 .smp_call_function+0
x100/0x1d0
[c00000000ed47780] c0000000000ba99c .invalidate_bh_lrus+0x30/0x70
[c00000000ed47810] c0000000000b91a0 .invalidate_bdev+0x18/0x3c
[c00000000ed478a0] c0000000000da7b8 .__invalidate_device+0x70/0x94
[c00000000ed47930] c0000000001d40bc .invalidate_partition+0x4c/0x7c
[c00000000ed479c0] c00000000010a944 .del_gendisk+0x48/0x15c
[c00000000ed47a50] d00000000003d55c .sd_remove+0x34/0xe4 [sd_mod]
[c00000000ed47ae0] c0000000001c5d30 .device_release_driver+0x90/0xb4
[c00000000ed47b70] c0000000001c6130 .bus_remove_device+0xb0/0x12c
[c00000000ed47c00] c0000000001c4378 .device_del+0x120/0x198
[c00000000ed47ca0] d00000000007dcdc .scsi_remove_device+0xb4/0x194 [scsi_mod]
[c00000000ed47d30] d0000000000a5864 .ipr_worker_thread+0x1d4/0x27c [ipr]
[c00000000ed47dd0] c0000000000734c4 .worker_thread+0x238/0x2f4
[c00000000ed47ee0] c0000000000796c0 .kthread+0xcc/0x11c
[c00000000ed47f90] c000000000018ad0 .kernel_thread+0x4c/0x6c
Signed-off-by: NBrian King <brking@us.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

With CONFIG_DEBUG_SLAB=y I see slab corruption messages during boot on
pSeries machines with IPR adapters with any 2.6.12-rc kernel.

The change which seems to have introduced the problem is "SCSI: revamp
target scanning routines" and may be found at:
http://marc.theaimsgroup.com/?l=bk-commits-head&m=111093946426333&w=2

In order to revert that in a 2.6.12-rc1 tree, I had to revert "target
code updates to support scanned targets" first:
http://marc.theaimsgroup.com/?l=bk-commits-head&m=111094132524649&w=2

With both patches reverted, the corruption messages go away.

ipr: IBM Power RAID SCSI Device Driver version: 2.0.13 (February 21,
2005)
ipr 0001:d0:01.0: Found IOA with IRQ: 167
ipr 0001:d0:01.0: Starting IOA initialization sequence.
ipr 0001:d0:01.0: Adapter firmware version: 020A005C
ipr 0001:d0:01.0: IOA initialized.
scsi0 : IBM 570B Storage Adapter
  Vendor: IBM       Model: VSBPD4E1  U4SCSI  Rev: 4770
  Type:   Enclosure                          ANSI SCSI revision: 02
  Vendor: IBM   H0  Model: HUS103036FL3800   Rev: RPQF
  Type:   Direct-Access                      ANSI SCSI revision: 04
  Vendor: IBM   H0  Model: HUS103036FL3800   Rev: RPQF
  Type:   Direct-Access                      ANSI SCSI revision: 04
  Vendor: IBM   H0  Model: HUS103036FL3800   Rev: RPQF
  Type:   Direct-Access                      ANSI SCSI revision: 04
  Vendor: IBM   H0  Model: HUS103036FL3800   Rev: RPQF
  Type:   Direct-Access                      ANSI SCSI revision: 04
  Vendor: IBM       Model: VSBPD4E1  U4SCSI  Rev: 4770
  Type:   Enclosure                          ANSI SCSI revision: 02
Slab corruption: start=c0000001e8de5268, len=512
Redzone: 0x5a2cf071/0x5a2cf071.
Last user: [<c00000000029c3a0>](.scsi_target_dev_release+0x28/0x50)
080: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6a
Prev obj: start=c0000001e8de5050, len=512
Redzone: 0x5a2cf071/0x5a2cf071.
Last user: [<0000000000000000>](0x0)
000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
Next obj: start=c0000001e8de5480, len=512
Redzone: 0x170fc2a5/0x170fc2a5.
Last user: [<c000000000228d7c>](.as_init_queue+0x5c/0x228)
000: c0 00 00 01 e8 83 26 08 00 00 00 00 00 00 00 00
010: 00 00 00 00 00 00 00 00 c0 00 00 01 e8 de 54 98
Slab corruption: start=c0000001e8de5268, len=512
Redzone: 0x5a2cf071/0x5a2cf071.
Last user: [<c00000000029c3a0>](.scsi_target_dev_release+0x28/0x50)
080: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6a
Prev obj: start=c0000001e8de5050, len=512
Redzone: 0x5a2cf071/0x5a2cf071.
Last user: [<0000000000000000>](0x0)
000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
Next obj: start=c0000001e8de5480, len=512
Redzone: 0x170fc2a5/0x170fc2a5.
Last user: [<c000000000228d7c>](.as_init_queue+0x5c/0x228)
000: c0 00 00 01 e8 83 26 08 00 00 00 00 00 00 00 00
010: 00 00 00 00 00 00 00 00 c0 00 00 01 e8 de 54 98
...

I did some digging and the problem seems to be a refcounting issue in
__scsi_add_device.  The target gets freed in scsi_target_reap, and
then __scsi_add_device tries to do another device_put on it.
Signed-off-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Correct incorrect locking order in qla2xxx_eh_abort() handler which
would case a hang during certain code-paths.

With extra pieces to fix the irq state in the locks.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>