UDP multicast rx path is a bit complex and can hold a spinlock
for a long time.

Using a small (32 or 64 entries) stack of socket pointers can help
to perform expensive operations (skb_clone(), udp_queue_rcv_skb())
outside of the lock, in most cases.

It's also a base for a future RCU conversion of multicast recption.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NLucian Adrian Grijincu <lgrijincu@ixiacom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We first locate the (local port) hash chain head
If few sockets are in this chain, we proceed with previous lookup algo.

If too many sockets are listed, we take a look at the secondary
(port, address) hash chain.

We choose the shortest chain and proceed with a RCU lookup on the elected chain.

But, if we chose (port, address) chain, and fail to find a socket on given address,
 we must try another lookup on (port, in6addr_any) chain to find sockets not bound
to a particular IP.

-> No extra cost for typical setups, where the first lookup will probabbly
be performed.

RCU lookups everywhere, we dont acquire spinlock.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We first locate the (local port) hash chain head
If few sockets are in this chain, we proceed with previous lookup algo.

If too many sockets are listed, we take a look at the secondary
(port, address) hash chain we added in previous patch.

We choose the shortest chain and proceed with a RCU lookup on the elected chain.

But, if we chose (port, address) chain, and fail to find a socket on given address,
 we must try another lookup on (port, INADDR_ANY) chain to find socket not bound
to a particular IP.

-> No extra cost for typical setups, where the first lookup will probabbly
be performed.

RCU lookups everywhere, we dont acquire spinlock.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Extends udp_table to contain a secondary hash table.

socket anchor for this second hash is free, because UDP
doesnt use skc_bind_node : We define an union to hold
both skc_bind_node & a new hlist_nulls_node udp_portaddr_node

udp_lib_get_port() inserts sockets into second hash chain
(additional cost of one atomic op)

udp_lib_unhash() deletes socket from second hash chain
(additional cost of one atomic op)

Note : No spinlock lockdep annotation is needed, because
lock for the secondary hash chain is always get after
lock for primary hash chain.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Union sk_hash with two u16 hashes for udp (no extra memory taken)

One 16 bits hash on (local port) value (the previous udp 'hash')

One 16 bits hash on (local address, local port) values, initialized
but not yet used. This second hash is using jenkin hash for better
distribution.

Because the 'port' is xored later, a partial hash is performed
on local address + net_hash_mix(net)
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adds a counter in udp_hslot to keep an accurate count
of sockets present in chain.

This will permit to upcoming UDP lookup algo to chose
the shortest chain when secondary hash is added.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NChristian Pellegrin <chripell@fsfe.org>
Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no good reason to not support userspace specifying the
network namespace during device creation, and it makes it easier
to create a network device and pass it to a child network namespace
with a well known name.

We have to be careful to ensure that the target network namespace
for the new device exists through the life of the call.  To keep
that logic clear I have factored out the network namespace grabbing
logic into rtnl_link_get_net.

In addtion we need to continue to pass the source network namespace
to the rtnl_link_ops.newlink method so that we can find the base
device source network namespace.
Signed-off-by: NEric W. Biederman <ebiederm@aristanetworks.com>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>

atalk_sum_partial can now use the rol16 function in bitops.h
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using RCU helps not touching device refcount in rawv6_bind()
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit fba4ed03 ("gianfar: Add Multiple
Queue Support") introduced the following warnings:

  CHECK   gianfar.c
gianfar.c:333:8: warning: incorrect type in assignment (different address spaces)
gianfar.c:333:8:    expected unsigned int [usertype] *baddr
gianfar.c:333:8:    got unsigned int [noderef] <asn:2>*<noident>
[... 67 lines skipped ...]
gianfar.c:2565:3: warning: incorrect type in argument 1 (different type sizes)
gianfar.c:2565:3:    expected unsigned long const *addr
gianfar.c:2565:3:    got unsigned int *<noident>
  CC      gianfar.o
gianfar.c: In function 'gfar_probe':
gianfar.c:985: warning: passing argument 1 of 'find_next_bit' from incompatible pointer type
gianfar.c:985: warning: passing argument 1 of 'find_next_bit' from incompatible pointer type
gianfar.c:993: warning: passing argument 1 of 'find_next_bit' from incompatible pointer type
gianfar.c:993: warning: passing argument 1 of 'find_next_bit' from incompatible pointer type
gianfar.c: In function 'gfar_configure_coalescing':
gianfar.c:1680: warning: passing argument 1 of 'find_next_bit' from incompatible pointer type
gianfar.c:1680: warning: passing argument 1 of 'find_next_bit' from incompatible pointer type
gianfar.c:1688: warning: passing argument 1 of 'find_next_bit' from incompatible pointer type
gianfar.c:1688: warning: passing argument 1 of 'find_next_bit' from incompatible pointer type
gianfar.c: In function 'gfar_poll':
gianfar.c:2565: warning: passing argument 1 of 'find_next_bit' from incompatible pointer type
gianfar.c:2565: warning: passing argument 1 of 'find_next_bit' from incompatible pointer type
gianfar.c:2566: warning: passing argument 2 of 'test_bit' from incompatible pointer type
gianfar.c:2585: warning: passing argument 2 of 'set_bit' from incompatible pointer type

Following warnings left unfixed (looks like sparse doesn't like
locks in loops, so __acquires/__releases() doesn't help):

gianfar.c:441:40: warning: context imbalance in 'lock_rx_qs': wrong count at exit
gianfar.c:441:40:    context '<noident>': wanted 0, got 1
gianfar.c:449:40: warning: context imbalance in 'lock_tx_qs': wrong count at exit
gianfar.c:449:40:    context '<noident>': wanted 0, got 1
gianfar.c:458:3: warning: context imbalance in 'unlock_rx_qs': __context__ statement expected different context
gianfar.c:458:3:    context '<noident>': wanted >= 0, got -1
gianfar.c:466:3: warning: context imbalance in 'unlock_tx_qs': __context__ statement expected different context
gianfar.c:466:3:    context '<noident>': wanted >= 0, got -1
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes following warnings:

fsl_pq_mdio.c:112:38: warning: cast adds address space to expression (<asn:2>)
fsl_pq_mdio.c:124:38: warning: cast adds address space to expression (<asn:2>)
fsl_pq_mdio.c:133:38: warning: cast adds address space to expression (<asn:2>)
fsl_pq_mdio.c:414:11: warning: cast adds address space to expression (<asn:2>)

Instead of adding __force all over the place, introduce convenient
fsl_pq_mdio_get_regs() call that does the ugly casting just once.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit 1d2397d7 ("fsl_pq_mdio: Add
Suport for etsec2.0 devices") introduced the following warnings:

  CHECK   fsl_pq_mdio.c
fsl_pq_mdio.c:287:22: warning: incorrect type in initializer (different base types)
fsl_pq_mdio.c:287:22:    expected unknown type 11 const *__mptr
fsl_pq_mdio.c:287:22:    got unsigned long long [unsigned] [assigned] [usertype] addr
fsl_pq_mdio.c:287:19: warning: incorrect type in assignment (different base types)
fsl_pq_mdio.c:287:19:    expected unsigned long long [unsigned] [usertype] ioremap_miimcfg
fsl_pq_mdio.c:287:19:    got struct fsl_pq_mdio *<noident>
  CC      fsl_pq_mdio.o
fsl_pq_mdio.c: In function 'fsl_pq_mdio_probe':
fsl_pq_mdio.c:287: warning: initialization makes pointer from integer without a cast
fsl_pq_mdio.c:287: warning: assignment makes integer from pointer without a cast

These warnings are not easy to fix without ugly __force casts. So,
instead of introducing the casts, rework the code to substitute an
offset from an already mapped area. This makes the code a lot simpler
and less duplicated.

Plus, from now on we don't actually map reserved registers on
non-etsec2.0 devices, so we have more chances to catch programming
errors.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pure cleanups patch
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

All users of wrapped proto_ops are now gone, so we can safely remove
the wrappers as well.

Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The x25 driver uses lock_kernel() implicitly through
its proto_ops wrapper. The makes the usage explicit
in order to get rid of that wrapper and to better document
the usage of the BKL.

The next step should be to get rid of the usage of the BKL
in x25 entirely, which requires understanding what data
structures need serialized accesses.

Cc: Henner Eisen <eis@baty.hanse.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: linux-x25@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The irda driver uses the BKL implicitly in its protocol
operations. Replace the wrapped proto_ops with explicit
lock_kernel() calls makes the usage more obvious and
shrinks the size of the object code.

The calls t lock_kernel() should eventually all be replaced
by other serialization methods, which requires finding out

The calls t lock_kernel() should eventually all be replaced
by other serialization methods, which requires finding out
which data actually needs protection.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Making the BKL usage explicit in ipx makes it more
obvious where it is used, reduces code size and helps
getting rid of the BKL in common code.

I did not analyse how to kill lock_kernel from ipx
entirely, this will involve either proving that it's not
needed, or replacing with a proper mutex or spinlock,
after finding out which data structures are protected
by the lock.

Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: netdev@vger.kernel.org
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Making the BKL usage explicit in appletalk makes it more
obvious where it is used, reduces code size and helps
getting rid of the BKL in common code.

I did not analyse how to kill lock_kernel from appletalk
entirely, this will involve either proving that it's not
needed, or replacing with a proper mutex or spinlock,
after finding out which data structures are protected
by the lock.

Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: netdev@vger.kernel.org
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

change atl1c_buffer struct, use "u16 flags" instead of "u16 state"
to store more infomation for atl1c_buffer, and restructure clean
atl1c_buffer procedure, add common api atl1c_clean_buffer.
Signed-off-by: NJie Yang <jie.yang@atheros.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

SPIN_LOCK_UNLOCKED is deprecated. Use DEFINE_SPINLOCK instead.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It's defined colloqually in linux/if.h and linux/compat.h
includes that.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The MII ioctls and SIOCSIFNAME need to go through ifsioc conversion,
which they never did so far. Some others are not implemented in the
native path, so we can just return -EINVAL directly.

Add IFSLAVE ioctls to the EINVAL list and move it to the end to
optimize the code path for the common case.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This removes the original socket compat_ioctl code
from fs/compat_ioctl.c and converts the code from the copy
in net/socket.c into a single function. We add a few cycles
of runtime to compat_sock_ioctl() with the long switch()
statement, but gain some cycles in return by simplifying
the call chain to get there.

Due to better inlining, save 1.5kb of object size in the
process, and enable further savings:

before:
   text    data     bss     dec     hex filename
  13540   18008    2080   33628    835c obj/fs/compat_ioctl.o
  14565     636      40   15241    3b89 obj/net/socket.o

after:
   text    data     bss     dec     hex filename
   8916   15176    2080   26172    663c obj/fs/compat_ioctl.o
  20725     636      40   21401    5399 obj/net/socket.o
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We must not have a compat ioctl handler for SIOCATALKDIFADDR
in common code, because the same number is used in other protocols
with different data structures.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This makes an identical copy of the socket compat_ioctl code
from fs/compat_ioctl.c to net/socket.c, as a preparation
for moving the functionality in a way that can be easily
reviewed.

The code is hidden inside of #if 0 and gets activated in the
patch that will make it work.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Slip and a few other drivers use the same ioctl numbers on
tty devices that are normally meant for sockets. This causes
problems with our compat_ioctl handling that tries to convert
the data structures in a different format.

Fortunately, these five drivers all use 32 bit compatible
data structures in the ioctl numbers, so we can just add
a trivial compat_ioctl conversion function to each of them.

SIOCSIFENCAP and SIOCGIFENCAP do not need to live in
fs/compat_ioctl.c after this any more, and they are not
used on any sockets.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The tun driver is the only code in the kernel that operates
on a character device with struct ifreq. Change the driver
to handle the conversion itself so we can contain the
remaining ifreq handling in the socket layer.

This also fixes a bug in the handling of invalid ioctl
numbers on an unbound tun device. The driver treats this
as a TUNSETIFF in native mode, but there is no way for
the generic compat_ioctl() function to emulate this
behaviour. Possibly the driver was only doing this
accidentally anyway, but if any code relies on this
misfeature, it now also works in compat mode.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to move socket ioctl conversion code into multiple
places in the socket code, we need a common defintion of
the data structures it uses.

Also change the name from ifreq32 to compat_ifreq to
follow the naming convention for compat.h
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for two more NL802154 commands: ADD_IFACE and DEL_IFACE,
thus allowing creation and removal of logic WPAN interfaces on the top
of wpan-phy.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>

Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>

Add two nl802154 helpers: one for starting a reply message, one for sending.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>

Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>

ops->get_phy should increment reference to wpan-phy. As we return
the external structure, we should do refcounting correctly.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>

Make fakehard device claim all 2.4 Ghz channels from 802.15.4-2006,
802.15.4a-2007 as supported by the hw.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>

Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>

Add nl802154 command to get information about PHY's present in
the system.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>