* Call ide_port_init_devices() in ide_host_register()
  also if 'struct ide_port_info *d' is not available.

* Init drive->dn in ide_port_init_devices() instead of
  ide_probe_port() so it is valid also in ->init_dev.

* Pass device number to ide_dev_apply_params().

* Use 'drive->dn & 1' instead of drive->select.b.unit.

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Having CY82C693_DEBUG_INFO is enough nowadays.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove dead CY82C693_SETDMA_CLOCK code and now not needed
init_chipset_cy82c693().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Move ide*_pm_* enums from ide-io.c to <linux/ide.h>.

* idedisk_pm_* -> ide_pm_*

* ide_pm_state_* -> ide_pm_*

* No need to set ide_pm_* enums to the fixed values.

* Uppercase ide_pm_* enums.

* Fix/update comments.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add IDE_DFLAG_LBA device flag and use it instead of ->select.b.lba.

Since ->tf_load uses ->select.all for ATA Device/Head register this
fixes HDIO_DRIVE_TASK[FILE] ioctls for CHS commands on LBA devices.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add IDE_DFLAG_DMA_PIO_RETRY and use it instead of
ide_drive_t.state + DMA_PIO_RETRY.

There should be no functional changes cause by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add 'unsigned long dev_flags' to ide_drive_t and convert bitfields
to IDE_DFLAG_* flags.

While at it:
- IDE_DFLAG_ADDRESSING -> IDE_DFLAG_LBA48
- fixup some comments
- remove needless g->flags zeroing from ide*_probe()

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add ide_do_setfeature() helper and convert set_{wcache,acoustic}()
to use it.

There should be no functional changes caused by this patch.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Return -EIO if arg > 0 and LBA48 is unsupported.

* No need to reset ->addressing.

* Make ->addressing a single bit flag.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ACPI _GTM / _PS0 / _STM were not called if only slave device was present.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

... with which to control to verbosity of debug messages on module load time.
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
[bart: no need to zero debug_mask + move module_param() closer debug_mask]
[bart: init drive->debug_mask in ide_floppy_probe() not in idefloppy_open()]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Also:

- leave in the possibility for optimizing away all debugging macros
- add a PFX macro and prepend all printk calls with it for consistency
- change idefloppy_create_rw_cmd's 1st arg from idefloppy_floppy_t * to
ide_drive_t *.
- add a missing printk-level in idefloppy_init
- fix minor checkpatch warnings
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Introduce to_ide_drv() and ide_drv_g() macros and replace the respective
definitions of similar ones in each driver.

There should be no functionality change resulting from this patch.
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

MAX_HWIFS is now always equal to the number of IDE major numbers.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Because hd.c was moved to drivers/block/ this config option
is superfluous now and may be removed.

v2:
Fix drivers/ide/Makefile (noticed by Adrian Bunk).

Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Move ->ticks field from struct ide_floppy_obj to ide_drive_t.

* Move idefloppy_transfer_pc() to ide-atapi.c and make
  ide_transfer_pc() use it.

* Always use ide_transfer_pc as a handler in ide_issue_pc().

* Remove no longer used idefloppy_start_pc_transfer(),
  ide*_transfer_pc() and 'handler' argument from ide_issue_pc().

* Make ide_transfer_pc() static.

While at it:

* idefloppy_transfer_pc() -> ide_delayed_transfer_pc()

* IDEFLOPPY_TICKS_DELAY -> IDEFLOPPY_PC_DELAY

* ->ticks -> ->pc_delay

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Always use ide_pc_intr as a handler in ide_pc_intr().

* Remove no longer used ide*_pc_intr() and 'handler'
  argument from ide_{transfer_pc,pc_intr}().

* Make ide_pc_intr() static.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add ->pc_{update,io}_buffers methods to ide_drive_t and use
them instead of {update,io}_buffers ide_pc_intr() arguments.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add ide_create_request_sense_cmd() and ide_retry_pc() helpers
  and convert ide-{atapi,floppy,tape}.c to use them.

* Remove no longer used ide*_create_request_sense_cmd(),
  ide*_retry_pc() and 'retry_pc' argument from ide_pc_intr().

* Make ide_queue_pc_head() static.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add 'struct ide_atapi_pc request_sense_pc' and 'request request_sense_rq' to
ide_drive_t and use them instead of fields in struct ide_{floppy,tape}_obj.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Move idescsi_expiry() to ide-atapi.c.

* Move get_timeout() to <linux/ide.h>.

* Drop 'timeout' and 'expiry' arguments from ide_pc_intr().

While at it:

* idescsi_expiry() -> ide_scsi_expiry()

* get_timeout() -> ide_scsi_get_timeout()

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add pointer to the current packet command (struct ide_atapi_pc *pc)
  to ide_drive_t and use it instead of the pointer in struct ide_*_obj.

* Use drive->pc in ide_{issue,transfer}_pc() and ide_pc_intr()
  instead of 'pc' argument.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add 'int dsc' argument to ->pc_callback method.

* Call ide_tape_handle_dsc() internally in ide_tape_callback()
  if dsc argument is set and update ide_pc_intr() accordingly.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fix several issues with the log messages printed by ide_dma_sgiioc4() and
sgiioc4_ide_setup_pci_device():

- IOC4 registers are memory-mapped but the "BM-DMA at" format corresponds to
  I/O  mapped registers;

- "%p" format specifiers and type casts used to print non-pointer values;

- using KERN_INFO log level for the error message;

- 'hwif->name' printed as drive's name.

While at it, also:

- return more fitting -EBUSY if request_mem_region() fails;

- make the error message style consistent;

- fix indentation, put the printk() facility and message on the same line;

- use comparisions with NULL instead of ! operator..
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: jeremy@sgi.com
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fix the drive non-busy criterion used by sgiioc4_read_status(): neither of the
bits it expects to be set guarantees that the drive is not busy (and might be
interrupting), only the BSY bit itself being zero gurantees that.
While at it, use ATA_BUSY instead of hardcoded value everywhere...
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: jeremy@sgi.com
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Use a special request for serialisation purposes and get rid of the
awkward ide_spin_wait_hwgroup(). This also involves converting the
ide_devset structure so it can be shared by the /proc and the ioctl code.
Signed-off-by: NElias Oltmanns <eo@nebensachen.de>
[bart: use rq->cmd[] directly]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

While at it:

* IDE{FLOPPY,TAPE}_WAIT_CMD -> WAIT_{FLOPPY,TAPE}_CMD

* Use enum for WAIT_* defines.

There should be no functional changes caused by this patch.
Acked-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add ide_do_test_unit_ready() helper and convert ide-{floppy,tape}.c
  to use it.

* Remove no longer used idetape_create_test_unit_ready_cmd().

There should be no functional changes caused by this patch.
Acked-by: NBorislav Petkov <petkovbb@gmail.com>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add ide_do_start_stop() helper and convert ide-{floppy,tape}.c
  to use it.

* Remove no longer used idefloppy_create_start_stop_cmd()
  and idetape_create_load_unload_cmd().

There should be no functional changes caused by this patch.
Acked-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Set IDE_AFLAG_NO_DOORLOCK in idetape_get_mode_sense_result(), check it
  in ide_tape_set_media_lock() and cleanup idetape_create_prevent_cmd().

* Set IDE_AFLAG_NO_DOORLOCK in ide_floppy_create_read_capacity_cmd() and
  check it instead of IDE_AFLAG_CLIK_DRIVE in ide_floppy_set_media_lock().

* Add ide_set_media_lock() helper and convert ide-{floppy,tape}.c to use it.

* Remove no longer used ide*_create_prevent_cmd()/ide*_set_media_lock().

* Update comment in <linux/ide.h> accordingly.
Acked-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

While at it:

- idefloppy_create_read_capacity_cmd() -> ide_floppy_create_read_capacity_cmd()
- idefloppy_create_mode_sense_cmd() -> ide_floppy_create_mode_sense_cmd()
- idefloppy_create_request_sense_cmd() -> ide_floppy_create_request_sense_cmd()
- idefloppy_create_format_unit_cmd() -> ide_floppy_create_format_unit_cmd()
- idefloppy_get_sfrp_bit() -> ide_floppy_get_sfrp_bit()
Acked-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add IDE_AFLAG_{SRFP,WP} drive->atapi_flags and use them
instead of ->{srfp,wp} struct ide_floppy_obj fields.

There should be no functional changes caused by this patch.
Acked-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add ide_queue_pc_tail() and convert ide-{floppy,tape}.c to use it
  instead of ide*_queue_pc_tail().

* Remove no longer used ide*_queue_pc_tail().

There should be no functional changes caused by this patch.
Acked-by: NBorislav Petkov <petkovbb@gmail.com>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Move REQ_IDETAPE_* enums to <linux/ide.h>.

* Add ide_queue_pc_head() and convert ide-{floppy,tape}.c to use it
  instead of ide*_queue_pc_head().

* Remove no longer used ide*_queue_pc_head().

There should be no functional changes caused by this patch.
Acked-by: NBorislav Petkov <petkovbb@gmail.com>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add IDE_PC_BUFFER_SIZE define.

* Add ide_init_pc() and convert ide-{floppy,tape}.c to use it
  instead of ide*_init_pc().

* Remove no longer used IDE*_PC_BUFFER_SIZE and ide*_init_pc().

There should be no functional changes caused by this patch.
Acked-by: NBorislav Petkov <petkovbb@gmail.com>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add ide_tape_set_media_lock() helper and convert idetape_mtioctop(),
idetape_chrdev_open() and idetape_chrdev_release() to use it.

There should be no functional changes caused by this patch (it is
OK to modify ->door_locked if idetape_create_prevent_cmd() fails).
Acked-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add ide_floppy_set_media_lock() helper and convert idefloppy_open(),
idefloppy_release() and ide_floppy_lockdoor() to use it.

There should be no functional changes caused by this patch.
Acked-by: NBorislav Petkov <petkovbb@gmail.com>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>