- 06 7月, 2006 2 次提交
-
-
由 Linus Torvalds 提交于
It's all good.
-
由 Andreas Schwab 提交于
Fix a typo in the toplevel makefile. Signed-off-by: NAndreas Schwab <schwab@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 04 7月, 2006 1 次提交
-
-
由 Sam Ravnborg 提交于
include/linux/version.h contained both actual KERNEL version and UTS_RELEASE that contains a subset from git SHA1 for when kernel was compiled as part of a git repository. This had the unfortunate side-effect that all files including version.h would be recompiled when some git changes was made due to changes SHA1. Split it out so we keep independent parts in separate files. Also update checkversion.pl script to no longer check for UTS_RELEASE. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 03 7月, 2006 1 次提交
-
-
由 Sam Ravnborg 提交于
Ubuntu has enabled -fstack-protector per default in gcc breaking kernel build. Explicit turn it off for now. Later we may decide to make it configurable if the kernel starts to support it. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 01 7月, 2006 2 次提交
-
-
由 Dustin Kirkland 提交于
Minor documentation change on allowing checkers besides sparse This patch cleans up a couple of mentions of sparse in the inline toplevel Makefile documentation such that it's clear that other checkers besides sparse can override CHECK and CHECKFLAGS. Signed-off-by: NDustin Kirkland <dustin.kirkland@us.ibm.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
kbuild used $¤(*F to get filename of target without extension. This was used in several places all over kbuild, but introducing make -rR broke his for all cases where we specified full path to target/prerequsite. It is assumed that make -rR disables old style suffix-rules which is why is suddenly failed. ia64 was impacted by this change because several div* routines in arch/ia64/lib are build using explicit paths and then kbuild failed. Thanks to David Mosberger-Tang <David.Mosberger@acm.org> for an explanation what was the root-cause and for testing on ia64. This patch also fixes two uses of $(*F) in arch/um Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 25 6月, 2006 5 次提交
-
-
由 Sam Ravnborg 提交于
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Masatake YAMATO 提交于
I'm using TAGS generated from "make TAGS" to read the kernel source code. When I met a ifdef block #ifdef CONFIG_FOO ... #endif in the soruce code I would like to know the meaning CONFIG_FOO to decide whether I should read inside the ifdef block or not. meaning CONFIG_FOO is well documented in Kconfig. So it is nice if I can jump to CONFIG_FOO entry in Kconfig from "#ifdef CONFIG_FOO" with the tag jump. Here is the patch to add symbols in Kconfig and defconfig to TAGS in "make TAGS" operation. Signed-off-by: NMasatake YAMATO <jet@gyve.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Andreas Gruenbacher 提交于
Here is a patch that adds a new -T option to genksyms for generating dumps of the type definition that makes up the symbol version hashes. This allows to trace modversion changes back to what caused them. The dump format is the name of the type defined, followed by its definition (which is almost C): s#list_head struct list_head { s#list_head * next , * prev ; } The s#, u#, e#, and t# prefixes stand for struct, union, enum, and typedef. The exported symbols do not define types, and thus do not have an x# prefix: nfs4_acl_get_whotype int nfs4_acl_get_whotype ( char * , t#u32 ) The symbol type defintion of a single file can be generated with: make fs/jbd/journal.symtypes If KBUILD_SYMTYPES is defined, all the *.symtypes of all object files that export symbols are generated. The single *.symtypes files can be combined into a single file after a kernel build with a script like the following: for f in $(find -name '*.symtypes' | sort); do f=${f#./} echo "/* ${f%.symtypes}.o */" cat $f echo done \ | sed -e '\:UNKNOWN:d' \ -e 's:[,;] }:}:g' \ -e 's:\([[({]\) :\1:g' \ -e 's: \([])},;]\):\1:g' \ -e 's: $::' \ $f \ | awk ' /^.#/ { if (defined[$1] == $0) { print $1 next } defined[$1] = $0 } { print } ' When the kernel ABI changes, diffing individual *.symtype files, or the combined files, against each other will show which symbol changes caused the ABI changes. This can save a tremendous amount of time. Dump the types that make up modversions Signed-off-by: NAndreas Gruenbacher <agruen@suse.de> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Roman Zippel 提交于
kconfig-fix-config-dependencies causes this: make CC=cc KBUILD_VERBOSE=1 -C /usr/src/25 SUBDIRS=/home/akpm/NVIDIA-Linux-x86_64-1.0-8762-pkg2/usr/src/nv modules make -f /usr/src/devel/Makefile silentoldconfig make -f /usr/src/devel/Makefile silentoldconfig make -f /usr/src/devel/Makefile silentoldconfig The basic problem is if we compile external modules, config-targets isn't set which can cause recursive calls to silentoldconfig to update the kernel configuration. Bail out and ask the user to update manually. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Theodore Ts'o 提交于
Add option for stripping modules while installing them. This function adds support for stripping modules while they are being installed. CONFIG_DEBUG_KERNEL (which will probably become more popular as developers use kdump) causes the size of the installed modules to grow by a factor of 9 or so. Some kernel package systems solve this problem by stripping the debug information from /lib/modules after running "make modules_install", but that may not work for people who are installing directly into /lib/modules --- root partitions that were sized to handle 16 megs worth of modules may not be quite so happy with 145 megs of modules, so the "make modules_install" never succeeds. This patch allows such users to request modules_install to strip the modules as they are installed. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 18 6月, 2006 3 次提交
-
-
由 David Woodhouse 提交于
Based on the 'headers_install' target, this performs a basic sanity check on the exported headers -- so far only checking that they do not include any other headers which aren't selected for import, but easily extendable. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 David Woodhouse 提交于
This adds a make target which exports a subset of headers which contain definitions which are useful for system libraries and tools. It uses the BSD 'unifdef' tool to remove instances of #ifdef __KERNEL__, and uses sed to remove markers like __user. Based on an original implementation by Arnd Bergmann <arnd@arndb.de> Hacked about by David Woodhouse <dwmw2@infradead.org> Reviewed and cleaned up by Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Linus Torvalds 提交于
Being named "Crazed Snow-Weasel" instills a lot of confidence in this release, so I'm sure this will be one of the better ones.
-
- 10 6月, 2006 1 次提交
-
-
由 Sam Ravnborg 提交于
kbuild does explicitly specify what to do in all cases, and each time make's built-in rules & variables has been used it has been a bug. So to speed up things and to avoid the hard-to-debug error situations ignore the built-in definitions. If any part of the kernel uses the built-in definitions the build will just stop there and it should be trivial to fix. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 09 6月, 2006 6 次提交
-
-
由 Zach Brown 提交于
The binrpm-pkg target uses KERNELRELEASE when generated its .spec file. When binrpm-pkg was the first build target run in a tree it generated the .spec before kernel.release so the Version: tag in the .spec was empty. I don't know if this is the best fix, but binrpm-pkg works when we explicitly build kernel.release before descending into package-dir. Signed-off-by: NZach Brown <zach.brown@oracle.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Roman Zippel 提交于
Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Roman Zippel 提交于
If you set KCONFIG_OVERWRITECONFIG in environment, Kconfig will not break symlinks when .config is a symlink to somewhere else. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Roman Zippel 提交于
This moves the .kernelrelease file into include/config directory. Remove its generation from the config step, if the config step doesn't leave a proper .config behind, it triggers a call to silentoldconfig. Instead its generation can be done via proper dependencies. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Roman Zippel 提交于
Now that kconfig can load multiple configurations, it becomes simple to integrate the split config step, by simply comparing the new .config file with the old auto.conf (and then saving the new auto.conf). A nice side effect is that this saves a bit of disk space and cache, as no data needs to be read from or saved into the splitted config files anymore (e.g. include/config is now 648KB instead of 5.2MB). Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Roman Zippel 提交于
This fixes one of the worst kbuild warts left - the broken dependencies used to check and regenerate the .config file. This was done via an indirect dependency and the .config itself had an empty command, which can cause make not to reread the changed .config file. Instead of this we generate now a new file include/config/auto.conf from .config, which is used for kbuild and has the proper dependencies. It's also the main make target now for all files generated during this step (and thus replaces include/linux/autoconf.h). This also means we can now relax the syntax requirements for the .config file and we don't have to rewrite it all the time, i.e. silentoldconfig only writes .config now when it's necessary to keep it in sync with the Kconfig files and even this can be suppressed by setting the environment variable KCONFIG_NOSILENTUPDATE, so the update can (and must) be done manually. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 06 6月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 25 5月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 12 5月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 08 5月, 2006 1 次提交
-
-
由 Jan Beulich 提交于
Change the conditional of the outputmakefile rule to be evaluated entirely in make, and add a conditional to not touch the generated makefile when e.g. running 'make install' as root while the build was done as non-root. Also adjust the comment describing this, and move the message printing and redirection to mkmakefile. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 01 5月, 2006 1 次提交
-
-
由 Pavel Roskin 提交于
Remove *.mod files but not .tmp_versions for external builds When "make install" is run as root, .tmp_versions is re-created and becomes owned by root. Subsequent "make" run by user fails because .tmp_versions cannot be removed. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 27 4月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 19 4月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 06 4月, 2006 2 次提交
-
-
由 Andreas Gruenbacher 提交于
When installing external modules with `make modules_install', the first thing that happens is a rm -rf of the target directory. This works only once, and breaks when installing more than one (set of) external module(s). With following fix we have the functionality: - for a in-kernel modules_install the $(MODLIB)/kernel directory will be deleted before module installation - for external modules the existing modules will be left as is assuming one may be building and installign several external modules Signed-off-by: NAndreas Gruenbacher <agruen@suse.de> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
kbuild added an extra '/' after the directory - resulting in all files being rebuild in a subdirectory. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 05 4月, 2006 1 次提交
-
-
由 Sam Ravnborg 提交于
This fixes single targets build so it now works relaiably in following cases: - build with mixed kernel source and output files (make single-target) - build with separate output directory (make O=.. single-target) - external module with mixed kernel source and output files (make M='pwd' single-target) - external module with separate kernel source and output files (make O=.. M='pwd' single-target) Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 03 4月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
Close of the merge window..
-
- 26 3月, 2006 1 次提交
-
-
由 Andi Kleen 提交于
gcc should handle this anyways, and it causes problems when sprintf is turned into strcpy by gcc behind our backs and the C fallback version of strcpy is actually defining __builtin_strcpy Then drop -ffreestanding from the main Makefile because it isn't needed anymore and implies -fno-builtin, which is wrong now. (it was only added for x86-64, so dropping it should be safe) Noticed by Roman Zippel Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 3月, 2006 1 次提交
-
-
由 Jan Beulich 提交于
As a foundation for reliable stack unwinding, this adds a config option (available to all architectures except IA64 and those where the module loader might have problems with the resulting relocations) to enable the generation of frame unwind information. Signed-off-by: NJan Beulich <jbeulich@novell.com> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org>, Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 21 3月, 2006 2 次提交
-
-
由 Sam Ravnborg 提交于
The checks performed by scripts/reference_* has been moved to modpost. Remove the files and their reference in top-level Makefile. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
FORCE was not defined => error. Use kbuild infrastructure to call down to the relevant Makefile. This enables us to use the FORCE definition from kbuild. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 20 3月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 13 3月, 2006 1 次提交
-
-
由 Adrian Bunk 提交于
I don't see any use case for the CONFIG_CC_ALIGN_* options: - they are only available if EMBEDDED - people using EMBEDDED will most likely also enable CC_OPTIMIZE_FOR_SIZE - the default for -Os is to disable alignment In case someone is doing performance comparisons and discovers that the default settings gcc chooses aren't good, the only sane thing is to discuss whether it makes sense to change this, not through offering options to change this locally. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 12 3月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
Gaah. Delayed. But all the better for it!
-
- 11 3月, 2006 1 次提交
-
-
由 Jan Beulich 提交于
Rebuilding a previously built tree while using make's -j option from time to time results in the version.h check running at the same time as the updating of .kernelrelease, resulting in UTS_RELEASE remaining an empty string (and as a side effect causing the entire kernel to be rebuilt). Signed-Off-By: NJan Beulich <jbeulich@novell.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-