- 18 8月, 2015 2 次提交
-
-
由 Shaohui Xie 提交于
Currently, if phy state is PHY_RUNNING, we always register a CHANGE when phy works in polling or interrupt ignored, this will make the adjust_link being called even the phy link did Not changed. checking the phy link to make sure the link did changed before we register a CHANGE, if link did not changed, we do nothing. Signed-off-by: NShaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Calvin Owens 提交于
Commit 8133534c ("net: limit tcp/udp rmem/wmem to SOCK_{RCV,SND}BUF_MIN") modified four sysctls to enforce that the values written to them are not less than SOCK_MIN_{RCV,SND}BUF. That change causes 4096 to no longer be accepted as a valid value for 'min' in tcp_wmem and udp_wmem_min. 4096 has been the default for both of those sysctls for a long time, and unfortunately seems to be an extremely popular setting. This change breaks a large number of sysctl configurations at Facebook. That commit referred to b1cb59cf ("net: sysctl_net_core: check SNDBUF and RCVBUF for min length"), which choose to use the SOCK_MIN constants as the lower limits to avoid nasty bugs. But AFAICS, a limit of SOCK_MIN_SNDBUF isn't necessary to do that: the BUG_ON cited in the commit message seems to have happened because unix_stream_sendmsg() expects a minimum of a full page (ie SK_MEM_QUANTUM) and the math broke, not because it had less than SOCK_MIN_SNDBUF allocated. This particular issue doesn't seem to affect TCP however: using a setting of "1 1 1" for tcp_{r,w}mem works, although it's obviously suboptimal. SK_MEM_QUANTUM would be a nice minimum, but it's 64K on some archs, so there would still be breakage. Since a value of one doesn't seem to cause any problems, we can drop the minimum 8133534c added to fix this. This reverts commit 8133534c. Fixes: 8133534c ("net: limit tcp/udp rmem/wmem to SOCK_MIN...") Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Sorin Dumitru <sorin@returnze.ro> Signed-off-by: NCalvin Owens <calvinowens@fb.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 8月, 2015 10 次提交
-
-
由 Eric Dumazet 提交于
When replacing del_timer() with del_timer_sync(), I introduced a deadlock condition : reqsk_queue_unlink() is called from inet_csk_reqsk_queue_drop() inet_csk_reqsk_queue_drop() can be called from many contexts, one being the timer handler itself (reqsk_timer_handler()). In this case, del_timer_sync() loops forever. Simple fix is to test if timer is pending. Fixes: 2235f2ac ("inet: fix races with reqsk timers") Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Claudiu Manoil 提交于
There are some MAC registers that need to be kept in sync with the link state parameters, see adjust_link(). However, after a MAC soft reset default values for these registers are assumed. In some cases (excepting if down/ if up for example) adjust_link() does not see that these values were reset to default because the priv->old* link parameters were left unchanged. So, reset the priv->old* link params as well during a MAC reset to let adjust_link() restore the MAC link settings to the actual link state values. Fixes following case, for example: Setting link to 100M, changing MTU (implies MAC reset), link state remains unchanged to 100M but MAC registers were reset to default (1G) breaking the connectivity w/ the PHY. Closing and re-opening the interface would restore the MAC link parameters to the correct values. Signed-off-by: NClaudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Whitcroft 提交于
When generating /proc/net/route we emit a header followed by a line for each route. When a short read is performed we will restart this process based on the open file descriptor. When calculating the start point we fail to take into account that the 0th entry is the header. This leads us to skip the first entry when doing a continuation read. This can be easily seen with the comparison below: while read l; do echo "$l"; done </proc/net/route >A cat /proc/net/route >B diff -bu A B | grep '^[+-]' On my example machine I have approximatly 10KB of route output. There we see the very first non-title element is lost in the while read case, and an entry around the 8K mark in the cat case: +wlan0 00000000 02021EAC 0003 0 0 400 00000000 0 0 0 -tun1 00C0AC0A 00000000 0001 0 0 950 00C0FFFF 0 0 0 Fix up the off-by-one when reaquiring position on continuation. Fixes: 8be33e95 ("fib_trie: Fib walk rcu should take a tnode and key instead of a trie and a leaf") BugLink: http://bugs.launchpad.net/bugs/1483440Acked-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NAndy Whitcroft <apw@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Lüssing 提交于
The recent refactoring of the IGMP and MLD parsing code into ipv6_mc_check_mld() / ip_mc_check_igmp() introduced a potential crash / BUG() invocation for bridges: I wrongly assumed that skb_get() could be used as a simple reference counter for an skb which is not the case. skb_get() bears additional semantics, a user count. This leads to a BUG() invocation in pskb_expand_head() / kernel panic if pskb_may_pull() is called on an skb with a user count greater than one - unfortunately the refactoring did just that. Fixing this by removing the skb_get() call and changing the API: The caller of ipv6_mc_check_mld() / ip_mc_check_igmp() now needs to additionally check whether the returned skb_trimmed is a clone. Fixes: 9afd85c9 ("net: Export IGMP/MLD message validation code") Reported-by: NBrenden Blanco <bblanco@plumgrid.com> Signed-off-by: NLinus Lüssing <linus.luessing@c0d3.blue> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm由 Linus Torvalds 提交于
Pull device mapper fixes from Mike Snitzer: - two stable fixes for corruption seen in a snapshot of thinp metadata; metadata snapshots aren't widely used but help provide a consistent view of the metadata associated with an active thin-pool. - a dm-cache fix for the 4.2 "default" policy switch from "mq" to "smq" * tag 'dm-4.2-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache policy smq: move 'dm-cache-default' module alias to SMQ dm btree: add ref counting ops for the leaves of top level btrees dm thin metadata: delete btrees when releasing metadata snapshot
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull xen block driver fixes from Jens Axboe: "A few small bug fixes for xen-blk{front,back} that have been sitting over my vacation" * 'for-linus' of git://git.kernel.dk/linux-block: xen-blkback: replace work_pending with work_busy in purge_persistent_gnt() xen-blkfront: don't add indirect pages to list when !feature_persistent xen-blkfront: introduce blkfront_gather_backend_features()
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip由 Linus Torvalds 提交于
Pull xen bug fixes from David Vrabel: - revert a fix from 4.2-rc5 that was causing lots of WARNING spam. - fix a memory leak affecting backends in HVM guests. - fix PV domU hang with certain configurations. * tag 'for-linus-4.2-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: Don't leak memory when unmapping the ring on HVM backend Revert "xen/events/fifo: Handle linked events when closing a port" x86/xen: build "Xen PV" APIC driver for domU as well
-
由 Linus Torvalds 提交于
This reverts commits 9a036b93 ("x86/signal/64: Remove 'fs' and 'gs' from sigcontext") and c6f20629 ("x86/signal/64: Fix SS handling for signals delivered to 64-bit programs"). They were cleanups, but they break dosemu by changing the signal return behavior (and removing 'fs' and 'gs' from the sigcontext struct - while not actually changing any behavior - causes build problems). Reported-and-tested-by: NStas Sergeev <stsp@list.ru> Acked-by: NAndy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Workaround hw bug when acquiring PCI bos ownership of iwlwifi devices, from Emmanuel Grumbach. 2) Falling back to vmalloc in conntrack should not emit a warning, from Pablo Neira Ayuso. 3) Fix NULL deref when rtlwifi driver is used as an AP, from Luis Felipe Dominguez Vega. 4) Rocker doesn't free netdev on device removal, from Ido Schimmel. 5) UDP multicast early sock demux has route handling races, from Eric Dumazet. 6) Fix L4 checksum handling in openvswitch, from Glenn Griffin. 7) Fix use-after-free in skb_set_peeked, from Herbert Xu. 8) Don't advertize NETIF_F_FRAGLIST in virtio_net driver, this can lead to fraglists longer than the driver can support. From Jason Wang. 9) Fix mlx5 on non-4k-pagesize systems, from Carol L Soto. 10) Fix interrupt storm in bna driver, from Ivan Vecera. 11) Don't propagate -EBUSY from netlink_insert(), from Daniel Borkmann. 12) Fix inet request sock leak, from Eric Dumazet. 13) Fix TX interrupt masking and marking in TX descriptors of fs_enet driver, from LEROY Christophe. 14) Get rid of rule optimizer in gianfar driver, it's buggy and unlikely to get fixed any time soon. From Jakub Kicinski * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits) cosa: missing error code on failure in probe() gianfar: remove faulty filer optimizer gianfar: correct list membership accounting gianfar: correct filer table writing bonding: Gratuitous ARP gets dropped when first slave added net: dsa: Do not override PHY interface if already configured net: fs_enet: mask interrupts for TX partial frames. net: fs_enet: explicitly remove I flag on TX partial frames inet: fix possible request socket leak inet: fix races with reqsk timers mkiss: Fix error handling in mkiss_open() bnx2x: Free NVRAM lock at end of each page bnx2x: Prevent null pointer dereference on SKB release cxgb4: missing curly braces in t4_setup_debugfs() net-timestamp: Update skb_complete_tx_timestamp comment ipv6: don't reject link-local nexthop on other interface netlink: make sure -EBUSY won't escape from netlink_insert bna: fix interrupts storm caused by erroneous packets net: mvpp2: replace TX coalescing interrupts with hrtimer net: mvpp2: enable proper per-CPU TX buffers unmapping ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp由 Linus Torvalds 提交于
Pull EDAC fix from Borislav Petkov: "A ppc4xx_edac fix for accessing ->csrows properly. This driver was missed during the conversion a couple of years ago" * tag 'edac_fix_for_4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, ppc4xx: Access mci->csrows array elements properly
-
- 13 8月, 2015 14 次提交
-
-
由 Michael Walle 提交于
The commit de3910eb ("edac: change the mem allocation scheme to make Documentation/kobject.txt happy") changed the memory allocation for the csrows member. But ppc4xx_edac was forgotten in the patch. Fix it. Signed-off-by: NMichael Walle <michael@walle.cc> Cc: <stable@vger.kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Link: http://lkml.kernel.org/r/1437469253-8611-1-git-send-email-michael@walle.ccSigned-off-by: NBorislav Petkov <bp@suse.de>
-
由 Dan Carpenter 提交于
If register_hdlc_device() fails, the current code returns 0 but we should return an error code instead. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jakub Kicinski says: ==================== gianfar: filer changes respinning with examples as requested. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
Current filer rule optimization is broken in several ways: (1) Can perform reads/writes beyond end of allocated tables. (gianfar_ethtool.c:1326). (2) It breaks badly for rules with more than 2 specifiers (e.g. matching ip, port, tos). Example: # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.1 dst-port 1 tos 1 action 1 Added rule with ID 254 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.2 dst-port 2 tos 2 action 9 Added rule with ID 253 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.3 dst-port 3 tos 3 action 17 Added rule with ID 252 # ./filer_decode /sys/kernel/debug/gfar1/filer_raw 00: MASK == 00000210 AND Q:00 ctrl:00000080 prop:00000210 01: FPR == 00000210 AND CLE Q:00 ctrl:00000281 prop:00000210 02: MASK == ffffffff AND Q:00 ctrl:00000080 prop:ffffffff 03: DPT == 00000003 AND Q:00 ctrl:0000008e prop:00000003 04: TOS == 00000003 AND Q:00 ctrl:0000008a prop:00000003 05: DIA == 0a000003 AND Q:11 ctrl:0000448c prop:0a000003 06: DPT == 00000002 AND Q:00 ctrl:0000008e prop:00000002 07: TOS == 00000002 AND Q:00 ctrl:0000008a prop:00000002 08: DIA == 0a000002 AND Q:09 ctrl:0000248c prop:0a000002 09: DIA == 0a000001 AND Q:00 ctrl:0000008c prop:0a000001 0a: DPT == 00000001 AND Q:00 ctrl:0000008e prop:00000001 0b: TOS == 00000001 CLE Q:01 ctrl:0000060a prop:00000001 ff: MASK >= 00000000 Q:00 ctrl:00000020 prop:00000000 (Entire cluster gets AND-ed together). (3) We observed that the masking rules it generates do not play well with clustering on P2020. Only first rule of the cluster would ever fire. Given that optimizer relies heavily on masking this is very hard to fix. Example: # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.1 dst-port 1 action 1 Added rule with ID 254 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.2 dst-port 2 action 9 Added rule with ID 253 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.3 dst-port 3 action 17 Added rule with ID 252 # ./filer_decode /sys/kernel/debug/gfar1/filer_raw 00: MASK == 00000210 AND Q:00 ctrl:00000080 prop:00000210 01: FPR == 00000210 AND CLE Q:00 ctrl:00000281 prop:00000210 02: MASK == ffffffff AND Q:00 ctrl:00000080 prop:ffffffff 03: DPT == 00000003 AND Q:00 ctrl:0000008e prop:00000003 04: DIA == 0a000003 Q:11 ctrl:0000440c prop:0a000003 05: DPT == 00000002 AND Q:00 ctrl:0000008e prop:00000002 06: DIA == 0a000002 Q:09 ctrl:0000240c prop:0a000002 07: DIA == 0a000001 AND Q:00 ctrl:0000008c prop:0a000001 08: DPT == 00000001 CLE Q:01 ctrl:0000060e prop:00000001 ff: MASK >= 00000000 Q:00 ctrl:00000020 prop:00000000 Which looks correct according to the spec but only the first (eth id 252)/last added rule for 10.0.0.3 will ever trigger. As if filer did not treat the AND CLE as cluster start but also kept AND-ing the rules. We found no errata covering this. The fact that nobody noticed (2) or (3) makes me think that this feature is not very widely used and we should just remove it. Reported-by: NAleksander Dutkowski <adutkowski@gmail.com> Signed-off-by: NJakub Kicinski <kubakici@wp.pl> Acked-by: NClaudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
At a cost of one line let's make sure .count is correct when calling gfar_process_filer_changes(). Signed-off-by: NJakub Kicinski <kubakici@wp.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
MAX_FILER_IDX is the last usable index. Using less-than will already guarantee that one entry for catch-all rule will be left, no need to subtract 1 here. Signed-off-by: NJakub Kicinski <kubakici@wp.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Venkat Venkatsubra 提交于
When the first slave is added (such as during bootup) the first gratuitous ARP gets dropped. We don't see this drop during a failover. The packet gets dropped in qdisc (noop_enqueue). The fix is to delay the sending of gratuitous ARPs till the bond dev's carrier is present. It can also be worked around by setting num_grat_arp to more than 1. Signed-off-by: NVenkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
In case we need to divert reads/writes using the slave MII bus, we may have already fetched a valid PHY interface property from Device Tree, and that mode is used by the PHY driver to make configuration decisions. If we could not fetch the "phy-mode" property, we will assign p->phy_interface to PHY_INTERFACE_MODE_NA, such that we can actually check for that condition as to whether or not we should override the interface value. Fixes: 19334920 ("net: dsa: Set valid phy interface type") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fix from Catalin Marinas: "Fix coarse clock monotonicity (VDSO timestamp off by one jiffy compared to the syscall one)" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: VDSO: fix coarse clock monotonicity regression
-
git://people.freedesktop.org/~agd5f/linux由 Linus Torvalds 提交于
Pull amd drm fixes from Alex Deucher: "Dave is on vacation at the moment, so please pull these radeon and amdgpu fixes directly. Just a few minor things for 4.2: - add a new radeon pci id - fix a power management regression in amdgpu - fix HEVC command buffer validation in amdgpu" * 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: add new OLAND pci id Revert "drm/amdgpu: Configure doorbell to maximum slots" drm/amdgpu: add context buffer size check for HEVC
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
This reverts commit 78ad5cdd. This commit breaks dpm and suspend/resume on CZ.
-
由 Boyuan Zhang 提交于
Signed-off-by: NBoyuan Zhang <boyuan.zhang@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap由 Linus Torvalds 提交于
Pull regmap fix from Mark Brown: "regmap: Fix handling of present bits on rbtree cache block resize When expanding a cache block we use krealloc() to resize the register present bitmap without initialising the newly allocated data (the original code was written for kzalloc()). Add an appropraite memset() to fix that" * tag 'regmap-fix-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: regcache-rbtree: Clean new present bits on present bitmap resize
-
- 12 8月, 2015 9 次提交
-
-
由 Yi Zhang 提交于
When creating dm-cache with the default policy, it will call request_module("dm-cache-default") to register the default policy. But the "dm-cache-default" alias was left referring to the MQ policy. Fix this by moving the module alias to SMQ. Fixes: bccab6a0 (dm cache: switch the "default" cache replacement policy from mq to smq) Signed-off-by: NYi Zhang <yizhan@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
由 Joe Thornber 提交于
When using nested btrees, the top leaves of the top levels contain block addresses for the root of the next tree down. If we shadow a shared leaf node the leaf values (sub tree roots) should be incremented accordingly. This is only an issue if there is metadata sharing in the top levels. Which only occurs if metadata snapshots are being used (as is possible with dm-thinp). And could result in a block from the thinp metadata snap being reused early, thus corrupting the thinp metadata snap. Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
-
由 Joe Thornber 提交于
The device details and mapping trees were just being decremented before. Now btree_del() is called to do a deep delete. Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
-
由 Linus Torvalds 提交于
Merge tag 'localmodconfig-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig Pull localmodconfig fix from Steven Rostedt: "Leonidas Spyropoulos found that modules like nouveau were being unselected by make localmodconfig even though their configs were set and the module was loaded and visible by lsmod. The reason for this was because streamline-config.pl only looks at Makefiles, and not Kbuild files. As these modules use Kbuild for their names, they too need to be checked by localmodconfig. This was fixed by Richard Weinberger" * tag 'localmodconfig-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig: localmodconfig: Use Kbuild files too
-
由 Richard Weinberger 提交于
In kbuild it is allowed to define objects in files named "Makefile" and "Kbuild". Currently localmodconfig reads objects only from "Makefile"s and misses modules like nouveau. Link: http://lkml.kernel.org/r/1437948415-16290-1-git-send-email-richard@nod.at Cc: stable@vger.kernel.org Reported-and-tested-by: NLeonidas Spyropoulos <artafinde@gmail.com> Signed-off-by: NRichard Weinberger <richard@nod.at> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth由 David S. Miller 提交于
Johan Hedberg says: ==================== pull request: bluetooth 2015-08-11 Here's an important regression fix for the 4.2-rc series that ensures user space isn't given invalid LTK values. The bug essentially prevents the encryption of subsequent LE connections, i.e. makes it impossible to pair devices over LE. Let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 LEROY Christophe 提交于
We are not interested in interrupts for partially transmitted frames. Unlike SCC and FCC, the FEC doesn't handle the I bit in buffer descriptors, instead it defines two interrupt bits, TXB and TXF. We have to mask TXB in order to only get interrupts once the frame is fully transmitted. Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 LEROY Christophe 提交于
We are not interested in interrupts for partially transmitted frames, we have to clear BD_ENET_TX_INTR explicitly otherwise it may remain from a previously used descriptor. Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux由 Linus Torvalds 提交于
Pull fbdev fixes from Tomi Valkeinen: - fix display regression on Versatile boards - fix OF node refcount bugs on omapdss - fix WARN about clock prepare on pxa3xx_gcu - fix mem leak in videomode helpers - fix fbconsole related boot problem on sun7i-a20-olinuxino-micro * tag 'fbdev-fixes-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: fbcon: unconditionally initialize cursor blink interval video: Fix possible leak in of_get_videomode() video: fbdev: pxa3xx_gcu: prepare the clocks OMAPDSS: Fix omap_dss_find_output_by_port_node() port refcount decrement OMAPDSS: Fix node refcount leak in omapdss_of_get_next_port() fbdev: select versatile helpers for the integrator
-
- 11 8月, 2015 5 次提交
-
-
由 Julien Grall 提交于
The commit ccc9d90a "xenbus_client: Extend interface to support multi-page ring" removes the call to free_xenballooned_pages() in xenbus_unmap_ring_vfree_hvm(), leaking a page for every shared ring. Only with backends running in HVM domains were affected. Signed-off-by: NJulien Grall <julien.grall@citrix.com> Cc: <stable@vger.kernel.org> Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: NWei Liu <wei.liu2@citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 David Vrabel 提交于
This reverts commit fcdf31a7. This was causing a WARNING whenever a PIRQ was closed since shutdown_pirq() is called with irqs disabled. Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Cc: <stable@vger.kernel.org>
-
由 Eric Dumazet 提交于
In commit b357a364 ("inet: fix possible panic in reqsk_queue_unlink()"), I missed fact that tcp_check_req() can return the listener socket in one case, and that we must release the request socket refcount or we leak it. Tested: Following packetdrill test template shows the issue 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 2920 <mss 1460,sackOK,nop,nop> +0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK> +.002 < . 1:1(0) ack 21 win 2920 +0 > R 21:21(0) Fixes: b357a364 ("inet: fix possible panic in reqsk_queue_unlink()") Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
reqsk_queue_destroy() and reqsk_queue_unlink() should use del_timer_sync() instead of del_timer() before calling reqsk_put(), otherwise we could free a req still used by another cpu. But before doing so, reqsk_queue_destroy() must release syn_wait_lock spinlock or risk a dead lock, as reqsk_timer_handler() might need to take this same spinlock from reqsk_queue_unlink() (called from inet_csk_reqsk_queue_drop()) Fixes: fa76ce73 ("inet: get rid of central tcp/dccp listener timer") Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabio Estevam 提交于
If register_netdev() fails we are not propagating the error and we return success because ax_open() succeeded previously. Fix this by checking the return value of ax_open() and register_netdev() and propagate the error in case of failure. Reported-by: NRUC_Soft_Sec <zy900702@163.com> Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-