The last patch forgot to add the driver to the Makefile, so it
would not end up getting built.  This resolves that issue.

Cc: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Kernel module (device driver) for dt3155 frame grabber
video4linux2 compliant (finally). Works with "xawtv -f".

======================================================

This driver is written (almost) from scratch, using the
allocator developed for dt3155pci see bellow). The driver
uses videobuf-dma-contig interface modified to use the above
mentioned allocator instead of dma_alloc_coheren().

The first thing to do was to design a new allocator based
on allocating a configurable number of 4MB chunks of memory,
that latter are broken into frame buffers of 768x576 bytes
kept in different FIFOs (queues). As far as the driver autoloads
as a kernel module during kernel boot, the allocation of 4MB
chunks succeeds.

The driver keeps three FIFOs: one for 4MB chunks, one for free
buffers (available for allocations) and one for buffers already
allocated. Allocation/deallocation is done automatically though
the video4linux videobuf subsystem (some pointers to functions
are replaced by driver supplied functions).

Sure, there are problems:

1. The device tested to work with "xawtv -f" either via read()
   method (DT3155_STREAMING not selected), or via mmap() method
   (DT3155_STREAMING is selected) only. This coresponds to either
   cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
   or
   cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
   but not when
   cap->capabilities = V4L2_CAP_VIDEO_CAPTURE |
                           V4L2_CAP_STREAMING |
                           V4L2_CAP_READWRITE;
   This is because xawtv calls poll() before starting streaming,
   but videobuf_poll_stream() automatically starts reading if streaming
   is not started.
   This selection is made during kernel configuration (for now).

2. Works for CCIR, but should work for RS-170 (not tested)
   This is made also during kernel configuration.

3. Could work for multiple dt3155 frame grabbers in a PC,
   (private data is allocated during PCI probe() method), but
   is not tested due to lack of a second board.

4. Not tested on a BIG ENDIAN architecture.

5. Many others you could find .... :-)

All critics, comments, suggestions are wellcome.
Signed-off-by: NMarin Mitov <mitov@issp.bas.bg>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This id was already in the drivers, so just use it there
instead of in a common header file.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Move the vendor id to the drivers needing it.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Put a pci vendor id into the drivers that need them.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The vendor id should be in the driver that needs it, not in
a common file.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

These are never used, so remove them.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Don't redefine something that we already have in the core
kernel.  Also move to use PCI_DEVICE() macros to make things
a bit simpler when changing the define.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Move the external variable into a .h file, where it belongs.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Just make the bit call when it is needed, no need to wrap
things up like this for no reason.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

It's only being used for one vendor id, so move it into
the driver that uses it and delete the file.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fixes all but one.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

No need to check for MODULE_LICENSE, it's always there.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This resolves some coding style issues in comedidev.h

And yes, volatile here meant nothing, removing it is ok.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This resolves some issues with comedilib.h
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix cxt1e1 build error:
drivers/staging/cxt1e1/linux.c:1195: error: 'struct net_device' has no member named 'priv'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NBob Beers <bob.beers@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

fix code style issues
Signed-of-by: NRoel Van Nyen <roel.vannyen@gmail.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch cleans up numerous WARNINGS and ERRORS listed by the
checkpatch.pl tool
Signed-off-by: NIain Churcher <iain.linux.coding@googlemail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix printk format warning in memrar:
drivers/staging/memrar/memrar_handler.c:393: warning: format '%u' expects type 'unsigned int', but argument 4 has type 'size_t'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Ossama Othman <ossama.othman@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patches comedi_fops.c to add kernel log level to some printk calls
Signed-off-by: NMark Rankilor <reodge@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This drivers allows a communication with the Analog Devices ADIS16255
Low Power Gyroscope over SPI.
Signed-off-by: NMatthias Brugger <mensch0815@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use the standard config option CONFIG_PM to enable rtl8192e PM
functions. Tested on Samsung N140 and it works fine. Without enabling
the PM functions, the box always fails to resume.
Signed-off-by: NYong Wang <yong.y.wang@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Code cleanup, removed empty IN definition used to denote input parameters.
Signed-off-by: NAndres More <more.andres@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The functions hostap_set_hostapd, hostap_iotctl clashed with functions of the
same name with CONFIG_HOSTAP=y and/or CONFIG_VT6656=y.
Signed-off-by: NForest Bond <forest@alittletooquiet.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The functions hostap_set_hostapd, hostap_iotctl clashed with functions of the
same name with CONFIG_HOSTAP=y and/or CONFIG_VT6655=y.
Signed-off-by: NForest Bond <forest@alittletooquiet.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Replaced custom U_ETHER_ADDR_LEN by ETH_ALEN from <linux/if_ether.h>.
Resolved checkpatch findings on the changed lines, mostly indentation.
Signed-off-by: NAndres More <more.andres@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Code cleanup following other USB drivers:
	- Renamed driver struct and callbacks to vt6656_*
	- Added __init/__exit like directives
	- Resolved checkpatch.pl findings on those lines
Signed-off-by: NAndres More <more.andres@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This change adds the Kconfig and Make file for TI's
ST line discipline driver and the BlueZ driver for BT
core of the TI BT/FM/GPS combo chip.
Signed-off-by: NPavan Savoy <pavan_savoy@ti.com>

This is BlueZ driver making use of Shared Transport line
discipline to communicate with the chip.
Signed-off-by: NPavan Savoy <pavan_savoy@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

A TODO file and a ABI to list the things to be done,
and user-space/kernel-space interface for this ldisc.
Signed-off-by: NPavan Savoy <pavan_savoy@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Texas Instruments BT, FM and GPS combo chips/drivers
make use of a single TTY to communicate with the chip.
This is the common header file for both the ST driver and the
protocol drivers which intend to use ST as their mode of
transport.
Signed-off-by: NPavan Savoy <pavan_savoy@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Texas Instruments BT, FM and GPS combo chips/drivers
make use of a single TTY to communicate with the chip.
This module constitutes the proprietary power management
protocol from TI for the BT/FM/GPS combo chips
Signed-off-by: NPavan Savoy <pavan_savoy@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Kernel Space Init-Manager works along with User-Mode
Init Manager daemon running to maintain the UART state.

Communication between user-space daemon and this module can be
	1. Via the pid written onto sysfs entry
	2. Via the rfkill subsystem

It also is a platform driver with a relevant platform device
in the board-*.c along with the list of BT/FM/GPS chip enable
gpio configuration
Signed-off-by: NPavan Savoy <pavan_savoy@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Texas Instruments BT, FM and GPS combo chips/drivers
make use of a single TTY to communicate with the chip.
This module constitutes the core logic, TTY ldisc driver
and the exported symbols for registering/unregistering of
the protocol drivers such as BT/FM/GPS.
Signed-off-by: NPavan Savoy <pavan_savoy@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NHoward Chu <hyc@symas.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Code cleanup in:
	git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
Findings were:
	do not use C99 // comments
	space required after that close brace '}'
	line over 80 characters
Signed-off-by: NAndres More <more.andres@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is a patch to the ieee80211_crypt.h file that fixed up a space
Errors found by the checkpatch.pl tools
Signed-off-by: NRuslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is a patch to the ieee80211.h file that fixed up a brace, comments
and space Errors found by the checkpatch.pl tools.
Signed-off-by: NRuslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is a patch to the dot11d.h file that fixed up a comments and space
Errors found by the checkpatch.pl tools
Signed-off-by: NRuslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>