Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 15 10月, 2007 19 次提交
  3. 10 10月, 2007 1 次提交
  5. 20 9月, 2007 2 次提交
    • H
      sched: fix invalid sched_class use · 9c95e731
      由 Hiroshi Shimamoto 提交于 
      When using rt_mutex, a NULL pointer dereference is occurred at
enqueue_task_rt. Here is a scenario;
1) there are two threads, the thread A is fair_sched_class and
   thread B is rt_sched_class.
2) Thread A is boosted up to rt_sched_class, because the thread A
   has a rt_mutex lock and the thread B is waiting the lock.
3) At this time, when thread A create a new thread C, the thread
   C has a rt_sched_class.
4) When doing wake_up_new_task() for the thread C, the priority
   of the thread C is out of the RT priority range, because the
   normal priority of thread A is not the RT priority. It makes
   data corruption by overflowing the rt_prio_array.
The new thread C should be fair_sched_class.

The new thread should be valid scheduler class before queuing.
This patch fixes to set the suitable scheduler class.
Signed-off-by: NHiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
      9c95e731
    • I
      sched: add /proc/sys/kernel/sched_compat_yield · 1799e35d
      由 Ingo Molnar 提交于 
      add /proc/sys/kernel/sched_compat_yield to make sys_sched_yield()
more agressive, by moving the yielding task to the last position
in the rbtree.

with sched_compat_yield=0:

   PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
  2539 mingo     20   0  1576  252  204 R   50  0.0   0:02.03 loop_yield
  2541 mingo     20   0  1576  244  196 R   50  0.0   0:02.05 loop

with sched_compat_yield=1:

   PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
  2584 mingo     20   0  1576  248  196 R   99  0.0   0:52.45 loop
  2582 mingo     20   0  1576  256  204 R    0  0.0   0:00.00 loop_yield
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
      1799e35d
  7. 05 9月, 2007 3 次提交
  9. 28 8月, 2007 1 次提交
    • I
      sched: make the scheduler converge to the ideal latency · f6cf891c
      由 Ingo Molnar 提交于 
      de-HZ-ification of the granularity defaults unearthed a pre-existing
property of CFS: while it correctly converges to the granularity goal,
it does not prevent run-time fluctuations in the range of
[-gran ... 0 ... +gran].

With the increase of the granularity due to the removal of HZ
dependencies, this becomes visible in chew-max output (with 5 tasks
running):

 out:  28 . 27. 32 | flu:  0 .  0 | ran:    9 .   13 | per:   37 .   40
 out:  27 . 27. 32 | flu:  0 .  0 | ran:   17 .   13 | per:   44 .   40
 out:  27 . 27. 32 | flu:  0 .  0 | ran:    9 .   13 | per:   36 .   40
 out:  29 . 27. 32 | flu:  2 .  0 | ran:   17 .   13 | per:   46 .   40
 out:  28 . 27. 32 | flu:  0 .  0 | ran:    9 .   13 | per:   37 .   40
 out:  29 . 27. 32 | flu:  0 .  0 | ran:   18 .   13 | per:   47 .   40
 out:  28 . 27. 32 | flu:  0 .  0 | ran:    9 .   13 | per:   37 .   40

average slice is the ideal 13 msecs and the period is picture-perfect 40
msecs. But the 'ran' field fluctuates around 13.33 msecs and there's no
mechanism in CFS to keep that from happening: it's a perfectly valid
solution that CFS finds.

to fix this we add a granularity/preemption rule that knows about
the "target latency", which makes tasks that run longer than the ideal
latency run a bit less. The simplest approach is to simply decrease the
preemption granularity when a task overruns its ideal latency. For this
we have to track how much the task executed since its last preemption.

( this adds a new field to task_struct, but we can eliminate that
  overhead in 2.6.24 by putting all the scheduler timestamps into an
  anonymous union. )

with this change in place, chew-max output is fluctuation-less all
around:

 out:  28 . 27. 39 | flu:  0 .  2 | ran:   13 .   13 | per:   41 .   40
 out:  28 . 27. 39 | flu:  0 .  2 | ran:   13 .   13 | per:   41 .   40
 out:  28 . 27. 39 | flu:  0 .  2 | ran:   13 .   13 | per:   41 .   40
 out:  28 . 27. 39 | flu:  0 .  2 | ran:   13 .   13 | per:   41 .   40
 out:  28 . 27. 39 | flu:  0 .  1 | ran:   13 .   13 | per:   41 .   40
 out:  28 . 27. 39 | flu:  0 .  1 | ran:   13 .   13 | per:   41 .   40

this patch has no impact on any fastpath or on any globally observable
scheduling property. (unless you have sharp enough eyes to see
millisecond-level ruckles in glxgears smoothness :-)
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NMike Galbraith <efault@gmx.de>
      f6cf891c
  11. 26 8月, 2007 3 次提交
  13. 25 8月, 2007 2 次提交
  15. 23 8月, 2007 5 次提交
    • I
      sched: tweak the sched_runtime_limit tunable · 505c0efd
      由 Ingo Molnar 提交于 
      Michael Gerdau reported reniced task CPU usage weirdnesses.
Such symptoms can be caused by limit underruns so double the
sched_runtime_limit.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      505c0efd
    • S
      sched: skip updating rq's next_balance under null SD · f549da84
      由 Suresh Siddha 提交于 
      Was playing with sched_smt_power_savings/sched_mc_power_savings and
found out that while the scheduler domains are reconstructed when sysfs
settings change, rebalance_domains() can get triggered with null domain
on other cpus, which is setting next_balance to jiffies + 60*HZ.
Resulting in no idle/busy balancing for 60 seconds.

Fix this.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      f549da84
    • S
      sched: fix broken SMT/MC optimizations · f8700df7
      由 Suresh Siddha 提交于 
      On a four package system with HT - HT load balancing optimizations were
broken.  For example, if two tasks end up running on two logical threads
of one of the packages, scheduler is not able to pull one of the tasks
to a completely idle package.

In this scenario, for nice-0 tasks, imbalance calculated by scheduler
will be 512 and find_busiest_queue() will return 0 (as each cpu's load
is 1024 > imbalance and has only one task running).

Similarly MC scheduler optimizations also get fixed with this patch.

[ mingo@elte.hu: restored fair balancing by increasing the fuzz and
                 adding it back to the power decision, without the /2
                 factor. ]
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      f8700df7
    • E
      sched: fix sysctl directory permissions · c57baf1e
      由 Eric W. Biederman 提交于 
      There are two remaining gotchas:

- The directories have impossible permissions (writeable).

- The ctl_name for the kernel directory is inconsistent with
  everything else.  It should be CTL_KERN.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      c57baf1e
    • I
      sched: sched_clock_idle_[sleep|wakeup]_event() · 2aa44d05
      由 Ingo Molnar 提交于 
      construct a more or less wall-clock time out of sched_clock(), by
using ACPI-idle's existing knowledge about how much time we spent
idling. This allows the rq clock to work around TSC-stops-in-C2,
TSC-gets-corrupted-in-C3 type of problems.

( Besides the scheduler's statistics this also benefits blktrace and
  printk-timestamps as well. )

Furthermore, the precise before-C2/C3-sleep and after-C2/C3-wakeup
callbacks allow the scheduler to get out the most of the period where
the CPU has a reliable TSC. This results in slightly more precise
task statistics.

the ACPI bits were acked by Len.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NLen Brown <len.brown@intel.com>
      2aa44d05
  17. 13 8月, 2007 2 次提交
  19. 11 8月, 2007 1 次提交
  21. 09 8月, 2007 1 次提交