This time using only sed and a few by hand.

v2: Rename also intel_ring_id and intel_ring_initialized.
v3: Fixed typo in intel_ring_initialized.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1458126040-33105-1-git-send-email-tvrtko.ursulin@linux.intel.com

Some trivial ones, first pass done with Coccinelle:

@@
@@
(
- I915_NUM_RINGS
+ I915_NUM_ENGINES
|
- intel_ring_flag
+ intel_engine_flag
|
- for_each_ring
+ for_each_engine
|
- i915_gem_request_get_ring
+ i915_gem_request_get_engine
|
- intel_ring_idle
+ intel_engine_idle
|
- i915_gem_reset_ring_status
+ i915_gem_reset_engine_status
|
- i915_gem_reset_ring_cleanup
+ i915_gem_reset_engine_cleanup
|
- init_ring_lists
+ init_engine_lists
)

But that didn't fully work so I cleaned it up with:

for f in *.[hc]; do sed -i -e s/I915_NUM_RINGS/I915_NUM_ENGINES/ $f; done
for f in *.[hc]; do sed -i -e s/i915_gem_request_get_ring/i915_gem_request_get_engine/ $f; done
for f in *.[hc]; do sed -i -e s/intel_ring_flag/intel_engine_flag/ $f; done
for f in *.[hc]; do sed -i -e s/intel_ring_idle/intel_engine_idle/ $f; done
for f in *.[hc]; do sed -i -e s/init_ring_lists/init_engine_lists/ $f; done
for f in *.[hc]; do sed -i -e s/i915_gem_reset_ring_cleanup/i915_gem_reset_engine_cleanup/ $f; done
for f in *.[hc]; do sed -i -e s/i915_gem_reset_ring_status/i915_gem_reset_engine_status/ $f; done

v2: Rebase.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

below and a couple manual fixups.

@@
identifier I, J;
@@
struct I {
...
- struct intel_engine_cs *J;
+ struct intel_engine_cs *engine;
...
}
@@
identifier I, J;
@@
struct I {
...
- struct intel_engine_cs J;
+ struct intel_engine_cs engine;
...
}
@@
struct drm_i915_private *d;
@@
(
- d->ring
+ d->engine
)
@@
struct i915_execbuffer_params *p;
@@
(
- p->ring
+ p->engine
)
@@
struct intel_ringbuffer *r;
@@
(
- r->ring
+ r->engine
)
@@
struct drm_i915_gem_request *req;
@@
(
- req->ring
+ req->engine
)

v2: Script missed the tracepoint code - fixed up by hand.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

@@
identifier func;
@@
func(..., struct intel_engine_cs *
- ring
+ engine
, ...)
{
<...
- ring
+ engine
...>
}
@@
identifier func;
type T;
@@
T func(..., struct intel_engine_cs *
- ring
+ engine
, ...);
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Done by the Coccinelle script below plus a manual
intervention to GEN8_RING_SEMAPHORE_INIT.

@@
expression E;
@@
- struct intel_engine_cs *ring = E;
+ struct intel_engine_cs *engine = E;
<+...
- ring
+ engine
...+>
@@
@@
- struct intel_engine_cs *ring;
+ struct intel_engine_cs *engine;
<+...
- ring
+ engine
...+>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

After the commit below the Broxton PLL IDs had an off-by-one error, so
fix this up. Also add a missing brace at intel_shared_dpll_init(), it
happened to compile only due to the way the IS_BROXTON macro is defined.

v2:
- remove debugging left-over

Fixes: a3c988ea ("drm/i915: Make SKL/KBL DPLL0 managed by the shared dpll code")
CC: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457978134-12362-1-git-send-email-imre.deak@intel.com

Whenever there's an update to the primary plane,
fbc_pre_update and fbc_post_update are called. Kill off
intel_crtc->atomic.update_fbc and now that intel_crtc->atomic
is empty, kill it off too.

Changes since v1:
- Add a intel_fbc_supports_rotation helper.
Changes since v2:
- Remove intel_fbc_supports_rotation_helper.
- Remove unrelated changes.
Changes since v3:
- Rebase
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457516145-32117-2-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>

fb_bits is useful to have in the crtc_state for cs flips when
the code is updated to use intel_frontbuffer_flip_prepare/complete.
So calculate it in advance and move it to crtc_state. The other stuff
can be calculated in post_plane_update, and aren't useful elsewhere.

Changes since v1:
- Changing wording, remove comment about loop.
Changes since v2:
- Rebase.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457516145-32117-1-git-send-email-maarten.lankhorst@linux.intel.com

Backmerge because:
- Maarten needs latest atomic patches from drm-misc.
- Lionel needs the color manager core patch from drm-misc.
- Ander extracted intel_dpll_mgr.c, we need a backmerge to avoid git
  losing track of things too often (right now it seems ok due to
  cherry-picks).
- Tvrtko needs a stable baseline to apply some large-scale renaming
  patches to i915 GEM code.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

gcc-6 warns about code in the nouveau driver that is obviously silly:

drivers/gpu/drm/nouveau/nvkm/engine/pm/nv40.c: In function 'nv40_perfctr_next':
drivers/gpu/drm/nouveau/nvkm/engine/pm/nv40.c:62:19: warning: self-comparison always evaluats to false [-Wtautological-compare]
  if (pm->sequence != pm->sequence) {

The behavior was accidentally introduced in a patch described as "This is
purely preparation for upcoming commits, there should be no code changes here.".
As far as I can tell, that was true for the rest of that patch except for
this one function, which has been changed to a NOP.

This patch restores the original behavior.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: 8c1aeaa1 ("drm/nouveau/pm: cosmetic changes")
Reviewed-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

* tag 'topic/drm-misc-2016-03-14' of git://anongit.freedesktop.org/drm-intel: (27 commits)
  drm: atomic helper: do not unreference error pointer
  drm/edid: Extract SADs properly from multiple audio data blocks
  drm: fix blob pointer check
  drm: introduce pipe color correction properties
  drm/atomic: Clean up update_connector_routing.
  drm/atomic: Clean up steal_encoder, v2.
  drm/atomic: Handle encoder assignment conflicts in a separate check, v3.
  drm/atomic: Handle encoder stealing from set_config better.
  drm/atomic: Always call steal_encoder, v2.
  drm/ast: removed optional dummy crtc mode_fixup function.
  drm/bochs: removed optional dummy crtc mode_fixup function.
  drm/fsl-dcu: removed optional dummy crtc mode_fixup function.
  drm/virtio: removed optional dummy crtc mode_fixup function.
  drm/nouveau/dispnv04: removed optional dummy crtc mode_fixup function.
  drm/atmel-hlcdc: remove optional dummy crtc mode_fixup function.
  drm/sti: removed optional dummy crtc mode_fixup function.
  drm/shmobile: removed optional dummy crtc mode_fixup function.
  drm/msm/mdp: removed optional dummy crtc mode_fixup function.
  drm/omapdrm: removed optional dummy crtc mode_fixup function.
  drm/rcar-du: removed optional dummy crtc mode_fixup function.
  ...

Merge tag 'drm-amdkfd-next-fixes-2016-03-15' of git://people.freedesktop.org/~gabbayo/linux into drm-next

* tag 'drm-amdkfd-next-fixes-2016-03-15' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: uninitialized variable in dbgdev_wave_control_set_registers()

The recent changes which removed platform data support from panels &
encoders had a few mistakes, causing probes of DVI connector and DSI
command mode panels to fail every time due to missing '!'. Fix the
if()s.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

At the end of the function we expect "status" to be zero, but it's
either -EINVAL or uninitialized.

Fixes: 788bf83d ('drm/amdkfd: Add wave control operation to debugger')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

This pull request covers what's left for 4.6.  Notably, it includes a
significant 3D performance improvement and a fix to HDMI hotplug
detection for the Pi2/3.

* tag 'drm-vc4-next-2016-03-14' of github.com:anholt/linux:
  drm/vc4: Recognize a more specific compatible string for V3D.
  dt-bindings: Add binding docs for V3D.
  drm/vc4: Return -EFAULT on copy_from_user() failure
  drm/vc4: Respect GPIO_ACTIVE_LOW on HDMI HPD if set in the devicetree.
  drm/vc4: Let gpiolib know that we're OK with sleeping for HPD.
  drm/vc4: improve throughput by pipelining binning and rendering jobs

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The Raspberry Pi Foundation's firmware updates are shipping device
trees using the old string, so we'll keep recognizing that as this rev
of V3D.  Still, we should use a more specific name in the upstream DT
to clarify which board is being supported, in case we do other revs of
V3D in the future.
Signed-off-by: NEric Anholt <eric@anholt.net>
Acked-by: NStephen Warren <swarren@wwwdotorg.org>

This was missed in the upstreaming process.
Signed-off-by: NEric Anholt <eric@anholt.net>
Acked-by: NStephen Warren <swarren@wwwdotorg.org>

- GM20x secure boot support (hence, acceleration, finally \o/)
- GM200 support
- GM20B clock driver
- Support for power sensors on some GPUs
- Various other fixes all over the place

* 'linux-4.6' of git://github.com/skeggsb/linux: (95 commits)
  drm/nouveau/clk/gm20b: add basic driver
  drm/nouveau/clk/gk20a: share reusable structures/functions
  drm/nouveau/clk/gk20a: set lowest frequency during init()
  drm/nouveau/clk/gk20a: split gk20a_clk_new()
  drm/nouveau/clk/gk20a: abstract pl_to_div
  drm/nouveau/clk/gk20a: put mnp values into their own struct
  drm/nouveau/clk/gk20a: emit parent rate as debug message
  drm/nouveau/clk/gk20a: only restore divider to 1:1 if needed
  drm/nouveau/clk/gk20a: only compute n_lo if needed
  drm/nouveau/clk/gk20a: fix VCO bit mask
  drm/nouveau/clk/gk20a: rename enable/disable functions
  drm/nouveau/clk/gk20a: reorganize variables in gk20a_pllg_calc_mnp()
  drm/nouveau/clk/gk20a: convert parameters to Khz
  drm/nouveau/volt: add GM20B driver
  drm/nouveau/volt/gk20a: split constructor
  drm/nouveau/volt/gk20a: share reusable members & functions
  drm/nouveau/ce/gm107: expose MaxwellDmaCopyA
  drm/nouveau/fifo/gm107: KeplerChannelGpfifoB, and 2048 channels
  drm/nouveau/fifo/gk110: expose KeplerChannelGpfifoB
  drm/nouveau/fifo/gk104: submit NOP after all PBDMA_INTR_0, not just DEVICE
  ...

Add a basic clock driver that reuses the GK20A logic.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Make functions/structures that the GM20B driver will reuse public.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Err on the safe side by setting the lowest frequency (and thus voltage)
during device init.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This allows to instanciate drivers that use the same logic as gk20a with
different parameters.

Add a constructor function to allow other chips that inherit from this
clock to easily initialize its members
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

pl_to_div may be done differently depending on the chip. Abstract this
operation so the same logic can be reused for them as well.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This allows us to read them using one single function and will be handy
to the GM20B driver.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Most users are probably not interested in this information.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Only restore the 1:1 divider if it is not set already. Also use the
proper masks for this operation and add a second write as done in the
Android code.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

n_lo is used if we are going to slide. Compute it only if that condition
succeeds to avoid confusion about future usage of this computation.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Fix the mask specified to switch to VCO mode was given as an (incorrect)
immediate value. Although the side-effect happens to be the same, this
is clearly incorrect.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

gk20a_pllg_disable() is only used in the context of gk20a_clk_fini().
Move its body there and rename _gk20a_pllg_enable() and
_gk20a_pllg_disable() to non-underscored versions.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Move some variables declarations to the scope where they are actually
used to make the code easier to follow.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Perform computations in Khz instead of Mhz for better precision.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Add basic GM20B volt driver that reuses the GK20A logic.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Split the constructor function so we can reuse the same logic in other
chips.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The CVB calculation and voltage setting functions can be reused for the
future chips. So move the declaration to gk20a.h.
Signed-off-by: NVince Hsu <vinceh@nvidia.com>
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The HW accepts KeplerDmaCopyA and MaxwellDmaCopyA classes.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This class supports a WFI method (0x0078) that's not present on the
KeplerChannelGpfifoA class.

The binary driver exposes both classes on these GPUs for some reason,
though there doesn't appear to be any difference in the setup that's
done for each (ie. even if you allocate GpfifoA, the WFI method will
still work).

We shall just expose GpfifoB, as I don't see a good reason to report
the presence of both.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Prevents the same interrupt from re-triggering forever.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>