- 10 12月, 2009 19 次提交
-
-
由 Dave Airlie 提交于
This merges some TTM overhauls to allow us to do better object placement for certain radeon GPUs that need scanout+cursor within range of each other, along with an API change to not return ERESTART to userspace, but to use ERESTARTSYS properly internally and have it convert to EINTR and catch that correctly. Also lots of radeon fixes across the board.
-
由 Dave Airlie 提交于
Pull more Intel changes in, especially one to init the GTT properly
-
由 Jerome Glisse 提交于
This add helper function to print information on eviction placements and memory manager status when eviction fails to allocate memory space. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
drm_mm_debug_table will print the memory manager state in table allowing to give a snapshot of the manager at given point in time. Usefull for debugging. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
On resume on my rv530 laptop surface cntl was left disabled, so wierd stuff would happen with rendering to a tiled front buffer. This checks if the surface regs are assigned to bos and reprograms the surface registers on resume using the same path that clears them all on init. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Sent the wrong patch earlier. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
This would allow to catch driver callback error of not properly setting the eviction placement structure. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Jerome Glisse 提交于
This would allow us to properly unload others module like TTM if initialization fails after we initiliazed TTM structure. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Jerome Glisse 提交于
Stupid bug, somehow copying the eviction placements into the result structure was missing. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Jerome Glisse 提交于
radeon_atombios_fini might be call while there is not valid atombios structure allocated, thus test for a not null ptr before trying to access this structure. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Alex Deucher 提交于
Supported on all AVIVO-based asics. Can be disabled via the new_pll module parameter: new_pll=0 - disable new_pll=1 - enable enabled by default [airlied: fixed to use do_div] Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Dave Airlie 提交于
We only want to return here for errors, the wait functions return a positive timeout otherwise, which gets back to userspace and causes X to crash here. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
Also sets affected TTM calls up to not wait interruptible, since that would cause an in-kernel spin until the TTM call succeeds, since the Radeon code does not return to user-space when a signal is received. Modifies interruptible fence waits to return -ERESTARTSYS rather than -EBUSY when interrupted by a signal, since that's the (yet undocumented) semantics required by the TTM sync object hooks. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
Return -ERESTARTSYS instead of -ERESTART when interrupted by a signal. The -ERESTARTSYS is converted to an -EINTR by the kernel signal layer before returned to user-space. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
This convert radeon to use new TTM validation API, it doesn't really take advantage of it beside in the eviction case. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
This change allow driver to pass sorted memory placement, from most prefered placement to least prefered placement. In order to avoid long function prototype a structure is used to gather memory placement informations such as range restriction (if you need a buffer to be in given range). Range restriction is determined by fpfn & lpfn which are the first page and last page number btw which allocation can happen. If those fields are set to 0 ttm will assume buffer can be put anywhere in the address space (thus it avoids putting a burden on the driver to always properly set those fields). This patch also factor few functions like evicting first entry of lru list or getting a memory space. This avoid code duplication. V2: Change API to use placement flags and array instead of packing placement order into a quadword. V3: Make sure we set the appropriate mem.placement flag when validating or allocation memory space. [Pending Thomas Hellstrom further review but okay from preliminary review so far]. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
These are required for changes to TTM. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
The object rework moved the tiling flag setup around wrongly, so tiling we getting setup then overwritten by fb format. Fixes regression with drm-radeon-next on rv530 laptop tiling test. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 09 12月, 2009 6 次提交
-
-
由 Chris Wilson 提交于
A residual bare printk survived the merger of the hang detector, remove this debugging left-over. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Alex Deucher 提交于
Entries in the i2c table aren't always ordered by id. This allows us to remove some quirks that are no longer needed. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
entries in the ss table aren't always ordered by id. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
- Don't add dac load detection property to DVI-D - Make sure i2c info is valid before adding DP aux chan bus - Don't create scaling_mode_property twice - fix typo that prevented coherent and load detection from working - add coherent prop to DP (for dp->dvi adapters) Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
If we don't need the zone we need to free it. Acked-By: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Zhao Yakui 提交于
Sometimes we will use a crtc for integerated LVDS, which is different with that assigned by BIOS. If we want to get flicker-free transitions, then we could read out the current state for it and set our current state accordingly. But it is true that if we aren't reading current state out, we do need to turn everything off before modesetting. Otherwise the clocks can get very angry and we get things worse than a flicker at boot. In fact we also do the similar thing in UMS mode. We will disable all the possible outputs/crtcs for the first modesetting. So we disable all the possible outputs/crtcs before entering the KMS mode. Before we configure connector/encoder/crtc, the function of drm_helper_disable_unused_function can disable all the possible outputs/crtcs. Signed-off-by: NZhao Yakui <yakui.zhao@intel.com> Reviewed-by: NEric Anholt <eric@anholt.net> Reviewed-by: NRafal Milecki <zajec5@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 08 12月, 2009 15 次提交
-
-
由 Andrew Lutomirski 提交于
Rather than restoring just a few clock gating registers on resume, just reinitialize the whole thing. Signed-off-by: NAndy Lutomirski <luto@mit.edu> [anholt: Fixed up for RC6 support landed since the patch was written] Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Dave Airlie 提交于
This merges the radeon KMS DisplayPort and hotplug detect support. Tested on RV635 DP card with a Dell 2408 monitor. Conflicts: drivers/gpu/drm/drm_fb_helper.c
-
由 Dave Airlie 提交于
This merges all the radeon changes that weren't reliant on core-next.
-
由 Dave Airlie 提交于
This merges the upstream Intel tree and fixes up numerous conflicts due to patches merged into Linus tree later in -rc cycle. Conflicts: drivers/char/agp/intel-agp.c drivers/gpu/drm/drm_dp_i2c_helper.c drivers/gpu/drm/i915/i915_irq.c drivers/gpu/drm/i915/i915_suspend.c
-
由 Dave Airlie 提交于
Bring all core drm changes into 2.6.32 tree and resolve the conflict that occurs. Conflicts: drivers/gpu/drm/drm_fb_helper.c
-
由 Ben Skeggs 提交于
crtc may be undefined at this point. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
This enabled interrupt driven hpd support for all radeon chips. Assuming the hpd pin is wired up correctly, the driver will generate uevents on digital monitor connect and disconnect and retrain DP monitors automatically. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
This just adds the functionality, it's not hooked up yet. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
This just adds the functionality, it's not hooked up yet. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
This just adds the functionality, it's not hooked up yet. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
This populates the connectors with HPD (Hot Plug Detect) information. This will be used in subsequent patches for automatic digital monitor connect/disconnect handling. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
only return connected if there is actually a monitor connected. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-