- 04 8月, 2014 1 次提交
-
-
由 NeilBrown 提交于
The new flag RPCAUTH_LOOKUP_RCU to credential lookup avoids locking, does not take a reference on the returned credential, and returns -ECHILD if a simple lookup was not possible. The returned value can only be used within an rcu_read_lock protected region. The main user of this is the new rpc_lookup_cred_nonblock() which returns a pointer to the current credential which is only rcu-safe (no ref-count held), and might return -ECHILD if allocation was required. Signed-off-by: NNeilBrown <neilb@suse.de> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 13 7月, 2014 1 次提交
-
-
由 Jeff Layton 提交于
...and add an new rpc_auth function to call it when it exists. This is only applicable for AUTH_GSS mechanisms, so we only specify this for those sorts of credentials. Signed-off-by: NJeff Layton <jlayton@poochiereds.net> Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
-
- 04 9月, 2013 1 次提交
-
-
由 Andy Adamson 提交于
This patch provides the RPC layer helper functions to allow NFS to manage data in the face of expired credentials - such as avoiding buffered WRITEs and COMMITs when the gss context will expire before the WRITEs are flushed and COMMITs are sent. These helper functions enable checking the expiration of an underlying credential key for a generic rpc credential, e.g. the gss_cred gss context gc_expiry which for Kerberos is set to the remaining TGT lifetime. A new rpc_authops key_timeout is only defined for the generic auth. A new rpc_credops crkey_to_expire is only defined for the generic cred. A new rpc_credops crkey_timeout is only defined for the gss cred. Set a credential key expiry watermark, RPC_KEY_EXPIRE_TIMEO set to 240 seconds as a default and can be set via a module parameter as we need to ensure there is time for any dirty data to be flushed. If key_timeout is called on a credential with an underlying credential key that will expire within watermark seconds, we set the RPC_CRED_KEY_EXPIRE_SOON flag in the generic_cred acred so that the NFS layer can clean up prior to key expiration. Checking a generic credential's underlying credential involves a cred lookup. To avoid this lookup in the normal case when the underlying credential has a key that is valid (before the watermark), a notify flag is set in the generic credential the first time the key_timeout is called. The generic credential then stops checking the underlying credential key expiry, and the underlying credential (gss_cred) match routine then checks the key expiration upon each normal use and sets a flag in the associated generic credential only when the key expiration is within the watermark. This in turn signals the generic credential key_timeout to perform the extra credential lookup thereafter. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 01 9月, 2013 1 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 30 8月, 2013 1 次提交
-
-
由 Trond Myklebust 提交于
The clnt->cl_principal is being used exclusively to store the service target name for RPCSEC_GSS/krb5 callbacks. Replace it with something that is stored only in the RPCSEC_GSS-specific code. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 30 3月, 2013 2 次提交
-
-
由 Chuck Lever 提交于
Clean up. This matches a similar API for the client side, and keeps ULP fingers out the of the GSS mech switch. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Acked-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
A SECINFO reply may contain flavors whose kernel module is not yet loaded by the client's kernel. A new RPC client API, called rpcauth_get_pseudoflavor(), is introduced to do proper checking for support of a security flavor. When this API is invoked, the RPC client now tries to load the module for each flavor first before performing the "is this supported?" check. This means if a module is available on the client, but has not been loaded yet, it will be loaded and registered automatically when the SECINFO reply is processed. The new API can take a full GSS tuple (OID, QoP, and service). Previously only the OID and service were considered. nfs_find_best_sec() is updated to verify all flavors requested in a SECINFO reply, including AUTH_NULL and AUTH_UNIX. Previously these two flavors were simply assumed to be supported without consulting the RPC client. Note that the replaced version of nfs_find_best_sec() can return RPC_AUTH_MAXFLAVOR if the server returns a recognized OID but an unsupported "service" value. nfs_find_best_sec() now returns RPC_AUTH_UNIX in this case. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 13 2月, 2013 1 次提交
-
-
由 Eric W. Biederman 提交于
Convert variables that store uids and gids to be of type kuid_t and kgid_t instead of type uid_t and gid_t. Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
- 17 7月, 2012 1 次提交
-
-
由 Chuck Lever 提交于
The gss_mech_list_pseudoflavors() function provides a list of currently registered GSS pseudoflavors. This list does not include any non-GSS flavors that have been registered with the RPC client. nfs4_find_root_sec() currently adds these extra flavors by hand. Instead, nfs4_find_root_sec() should be looking at the set of flavors that have been explicitly registered via rpcauth_register(). And, other areas of code will soon need the same kind of list that contains all flavors the kernel currently knows about (see below). Rather than cloning the open-coded logic in nfs4_find_root_sec() to those new places, introduce a generic RPC function that generates a full list of registered auth flavors and pseudoflavors. A new rpc_authops method is added that lists a flavor's pseudoflavors, if it has any. I encountered an interesting module loader loop when I tried to get the RPC client to invoke gss_mech_list_pseudoflavors() by name. This patch is a pre-requisite for server trunking discovery, and a pre-requisite for fixing up the in-kernel mount client to do better automatic security flavor selection. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 01 2月, 2012 1 次提交
-
-
由 Stanislav Kinsbursky 提交于
This patch subscribes RPC clients to RPC pipefs notifications. RPC clients notifier block is registering with pipefs initialization during SUNRPC module init. This notifier callback is responsible for RPC client PipeFS directory and GSS pipes creation. For pipes creation and destruction two additional callbacks were added to struct rpc_authops. Note that no locking required in notifier callback because PipeFS superblock pointer is passed as an argument from it's creation or destruction routine and thus we can be sure about it's validity. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 05 1月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
Instead of hacking specific service names into gss_encode_v1_msg, we should just allow the caller to specify the service name explicitly. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Acked-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 27 7月, 2011 1 次提交
-
-
由 Arun Sharma 提交于
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: NArun Sharma <asharma@fb.com> Reviewed-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 12月, 2010 2 次提交
-
-
由 Chuck Lever 提交于
Now that all client-side XDR decoder routines use xdr_streams, there should be no need to support the legacy calling sequence [rpc_rqst *, __be32 *, RPC res *] anywhere. We can construct an xdr_stream in the generic RPC code, instead of in each decoder function. This is a refactoring change. It should not cause different behavior. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Now that all client-side XDR encoder routines use xdr_streams, there should be no need to support the legacy calling sequence [rpc_rqst *, __be32 *, RPC arg *] anywhere. We can construct an xdr_stream in the generic RPC code, instead of in each encoder function. Also, all the client-side encoder functions return 0 now, making a return value superfluous. Take this opportunity to convert them to return void instead. This is a refactoring change. It should not cause different behavior. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 30 9月, 2010 1 次提交
-
-
由 Stephen Rothwell 提交于
On Wed, 29 Sep 2010 14:02:38 +1000 Stephen Rothwell <sfr@canb.auug.org.au> wrote: > > After merging the final tree, today's linux-next build (powerpc > ppc44x_defconfig) produced tis warning: > > WARNING: net/sunrpc/sunrpc.o(.init.text+0x110): Section mismatch in reference from the function init_sunrpc() to the function .exit.text:rpcauth_remove_module() > The function __init init_sunrpc() references > a function __exit rpcauth_remove_module(). > This is often seen when error handling in the init function > uses functionality in the exit path. > The fix is often to remove the __exit annotation of > rpcauth_remove_module() so it may be used outside an exit section. > > Probably caused by commit 2f72c9b7 > ("sunrpc: The per-net skeleton"). This actually causes a build failure on a sparc32 defconfig build: `rpcauth_remove_module' referenced in section `.init.text' of net/built-in.o: defined in discarded section `.exit.text' of net/built-in.o I applied the following patch for today: Fixes: `rpcauth_remove_module' referenced in section `.init.text' of net/built-in.o: defined in discarded section `.exit.text' of net/built-in.o Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 04 8月, 2010 5 次提交
-
-
由 Trond Myklebust 提交于
This will allow us to save the original generic cred in rpc_message, so that if we migrate from one server to another, we can generate a new bound cred without having to punt back to the NFS layer. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
This patch allows the user to configure the credential cache hashtable size using a new module parameter: auth_hashtable_size When set, this parameter will be rounded up to the nearest power of two, with a maximum allowed value of 1024 elements. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Cleanup in preparation for allowing the user to determine the maximum hash table size. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 15 5月, 2010 1 次提交
-
-
由 Trond Myklebust 提交于
Now that the rpc.gssd daemon can explicitly tell us that the key expired, we should cache that information to avoid spamming gssd. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 16 9月, 2009 1 次提交
-
-
由 Trond Myklebust 提交于
Otherwise, the upcall is going to be synchronous, which may not be what the caller wants... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
- 20 4月, 2008 2 次提交
-
-
由 Trond Myklebust 提交于
We need to try to ensure that we always use the same credentials whenever we re-establish the clientid on the server. If not, the server won't recognise that we're the same client, and so may not allow us to recover state. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
With the recent change to generic creds, we can no longer use cred->cr_ops->cr_name to distinguish between RPCSEC_GSS principals and AUTH_SYS/AUTH_NULL identities. Replace it with the rpc_authops->au_name instead... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 15 3月, 2008 5 次提交
-
-
由 Trond Myklebust 提交于
We need the ability to treat 'generic' creds specially, since they want to bind instances of the auth cred instead of binding themselves. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Add an rpc credential that is not tied to any particular auth mechanism, but that can be cached by NFS, and later used to look up a cred for whichever auth mechanism that turns out to be valid when the RPC call is being made. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The current RPCAUTH_LOOKUP_ROOTCREDS flag only works for AUTH_SYS authentication, and then only as a special case in the code. This patch removes the auth_sys special casing, and replaces it with generic code. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The hash bucket is for some reason always being set to zero. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 11 7月, 2007 10 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Convert to the use of atomic bitops... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Add a helper rpc_cred_init() Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Also do the same for gss_api operation tables. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The leak only affects the RPCSEC_GSS caches, since they are the only ones that are dynamically allocated... Rename the existing rpcauth_free_credcache() to rpcauth_clear_credcache() in order to better describe its role, then add a new function rpcauth_destroy_credcache() that actually frees the cache in addition to clearing it out. Also move the call to destroy the credcache in gss_destroy() to come before the rpc upcall pipe is unlinked. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Cleans up an issue whereby rpcsec_gss uses the rpc_clnt->cl_auth. If we want to be able to add several rpc_auths to a single rpc_clnt, then this abuse must go. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 04 10月, 2006 1 次提交
-
-
由 Greg Banks 提交于
The limit over UDP remains at 32K. Also, make some of the apparently arbitrary sizing constants clearer. The biggest change here involves replacing NFSSVC_MAXBLKSIZE by a function of the rqstp. This allows it to be different for different protocols (udp/tcp) and also allows it to depend on the servers declared sv_bufsiz. Note that we don't actually increase sv_bufsz for nfs yet. That comes next. Signed-off-by: NGreg Banks <gnb@melbourne.sgi.com> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-