Originally we calculated ht_nodeid as "ht_nodeid = apicid -
boot_cpu_id;" so presumably it could be negative.

But after commit:

  01aaea1a ('x86: introduce initial apicid')

we use c->initial_apicid which is an unsigned short and thus always >= 0.

It causes a static checker warning to test for impossible
conditions so let's remove it.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Hector Marco-Gisbert <hecmargi@upv.es>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Link: http://lkml.kernel.org/r/20160113123940.GE19993@mwandaSigned-off-by: NIngo Molnar <mingo@kernel.org>

Without the reboot=pci method, the iMac 10,1 simply
hangs after printing "Restarting system" at the point
when it should reboot. This fixes it.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1450466646-26663-1-git-send-email-mario.kleiner.de@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

... from the final ELF image's symbol table as they're not
really needed there.

Before:

$ readelf -a vmlinux | grep verify_cpu
    43: ffffffff810001a9     0 NOTYPE  LOCAL  DEFAULT    1 verify_cpu
    45: ffffffff8100028f     0 NOTYPE  LOCAL  DEFAULT    1 verify_cpu_no_longmode
    46: ffffffff810001de     0 NOTYPE  LOCAL  DEFAULT    1 verify_cpu_noamd
    47: ffffffff8100022b     0 NOTYPE  LOCAL  DEFAULT    1 verify_cpu_check
    48: ffffffff8100021c     0 NOTYPE  LOCAL  DEFAULT    1 verify_cpu_clear_xd
    49: ffffffff81000263     0 NOTYPE  LOCAL  DEFAULT    1 verify_cpu_sse_test
    50: ffffffff81000296     0 NOTYPE  LOCAL  DEFAULT    1 verify_cpu_sse_ok

After:

$ readelf -a vmlinux | grep verify_cpu
    43: ffffffff810001a9     0 NOTYPE  LOCAL  DEFAULT    1 verify_cpu

No functionality change.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1451860733-21163-1-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

When "eagerfpu=off" is given as a command-line input, the kernel
should disable AVX support.

The Task Switched bit used for lazy context switching does not
support AVX. If AVX is enabled without eagerfpu context
switching, one task's AVX state could become corrupted or leak
to other tasks. This is a bug and has bad security implications.

This only affects systems that have AVX/AVX2/AVX512 and this
issue will be found only when one actually uses AVX/AVX2/AVX512
_AND_ does eagerfpu=off.

Reference: Intel Software Developer's Manual Vol. 3A

Sec. 2.5 Control Registers:
TS Task Switched bit (bit 3 of CR0) -- Allows the saving of the
x87 FPU/ MMX/SSE/SSE2/SSE3/SSSE3/SSE4 context on a task switch
to be delayed until an x87 FPU/MMX/SSE/SSE2/SSE3/SSSE3/SSE4
instruction is actually executed by the new task.

Sec. 13.4.1 Using the TS Flag to Control the Saving of the X87
FPU and SSE State
When the TS flag is set, the processor monitors the instruction
stream for x87 FPU, MMX, SSE instructions. When the processor
detects one of these instructions, it raises a
device-not-available exeception (#NM) prior to executing the
instruction.
Signed-off-by: NYu-cheng Yu <yu-cheng.yu@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/1452119094-7252-5-git-send-email-yu-cheng.yu@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This issue is a fallout from the command-line parsing move.

When "eagerfpu=off" is given as a command-line input, the kernel
should disable MPX support. The decision for turning off MPX was
made in fpu__init_system_ctx_switch(), which is after the
selection of the XSAVE format. This patch fixes it by getting
that decision done earlier in fpu__init_system_xstate().
Signed-off-by: NYu-cheng Yu <yu-cheng.yu@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/1452119094-7252-4-git-send-email-yu-cheng.yu@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

When "noxsave" is given as a command-line input, the kernel
should disable XGETBV1. This issue currently does not cause any
actual problems. XGETBV1 is only useful if we have something
using the 'init optimization' (i.e. xsaveopt, xsaves). We
already clear both of those in fpu__xstate_clear_all_cpu_caps().
But this is good for completeness.
Signed-off-by: NYu-cheng Yu <yu-cheng.yu@intel.com>
Reviewed-by: NDave Hansen <dave.hansen@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/1452119094-7252-3-git-send-email-yu-cheng.yu@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The function fpu__init_system() is executed before
parse_early_param(). This causes wrong FPU configuration. This
patch fixes this issue by parsing boot_command_line in the
beginning of fpu__init_system().

With all four patches in this series, each parameter disables
features as the following:

eagerfpu=off: eagerfpu, avx, avx2, avx512, mpx
no387: fpu
nofxsr: fxsr, fxsropt, xmm
noxsave: xsave, xsaveopt, xsaves, xsavec, avx, avx2, avx512,
mpx, xgetbv1 noxsaveopt: xsaveopt
noxsaves: xsaves
Signed-off-by: NYu-cheng Yu <yu-cheng.yu@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/1452119094-7252-2-git-send-email-yu-cheng.yu@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This is a long standing bug with the l1-dcache-stores generic event on
AMD machines.  My perf_event testsuite has been complaining about this
for years and I'm finally getting around to trying to get it fixed.

The data_cache_refills:system event does not make sense for l1-dcache-stores.
Maybe this was a typo and it was meant to be for l1-dcache-store-misses?

In any case, the values returned are nowhere near correct for l1-dcache-stores
and in fact the umask values for the event have completely changed with
fam15h so it makes even less sense than ever.  So just remove it.
Signed-off-by: NVince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1512091134350.24311@vincent-weaver-1.umelst.maine.eduSigned-off-by: NIngo Molnar <mingo@kernel.org>

Knights Landing uncore performance monitoring (perfmon) is derived from
Haswell-EP uncore perfmon with several differences. One notable difference
is in PCI device IDs. Knights Landing uses common PCI device ID for
multiple instances of an uncore PMU device type. In Haswell-EP, each
instance of a PMU device type has a unique device ID.

Knights Landing uncore components that have performance monitoring units
are UBOX, CHA, EDC, MC, M2PCIe, IRP and PCU. Perfmon registers in EDC, MC,
IRP, and M2PCIe reside in the PCIe configuration space. Perfmon registers
in UBOX, CHA and PCU are accessed via the MSR interface.

For more details, please refer to the public document:

  https://software.intel.com/sites/default/files/managed/15/8d/IntelXeonPhi%E2%84%A2x200ProcessorPerformanceMonitoringReferenceManual_Volume1_Registers_v0%206.pdfSigned-off-by: NHarish Chegondi <harish.chegondi@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Harish Chegondi <harish.chegondi@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lukasz Anaczkowski <lukasz.anaczkowski@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/8ac513981264c3eb10343a3f523f19cc5a2d12fe.1449470704.git.harish.chegondi@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Call uncore_pci_box_ctl() function to get the PMON box control MSR offset
instead of hard coding the offset. This would allow us to use this
snbep_uncore_pci_init_box() function for other PCI PMON devices whose box
control MSR offset is different from SNBEP_PCI_PMON_BOX_CTL.
Signed-off-by: NHarish Chegondi <harish.chegondi@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Harish Chegondi <harish.chegondi@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lukasz Anaczkowski <lukasz.anaczkowski@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/872e8ef16cfc38e5ff3b45fac1094e6f1722e4ad.1449470704.git.harish.chegondi@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Knights Landing core is based on Silvermont core with several differences.
Like Silvermont, Knights Landing has 8 pairs of LBR MSRs. However, the
LBR MSRs addresses match those of the Xeon cores' first 8 pairs of LBR MSRs
Unlike Silvermont, Knights Landing supports hyperthreading. Knights Landing
offcore response events config register mask is different from that of the
Silvermont.

This patch was developed based on a patch from Andi Kleen.

For more details, please refer to the public document:

  https://software.intel.com/sites/default/files/managed/15/8d/IntelXeonPhi%E2%84%A2x200ProcessorPerformanceMonitoringReferenceManual_Volume1_Registers_v0%206.pdfSigned-off-by: NHarish Chegondi <harish.chegondi@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Harish Chegondi <harish.chegondi@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lukasz Anaczkowski <lukasz.anaczkowski@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/d14593c7311f78c93c9cf6b006be843777c5ad5c.1449517401.git.harish.chegondi@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The uncore subsystem for Broadwell-EP is similar to Haswell-EP.
There are some differences in pci device IDs, box number and
constraints. This patch extends the Broadwell-DE codes to support
Broadwell-EP.
Signed-off-by: NKan Liang <kan.liang@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1449176411-9499-1-git-send-email-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Actually, rapl_sysfs_show is a duplicate of perf_event_sysfs_show. We
prefer to use the unified interface.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dasaratharaman Chandramouli<dasaratharaman.chandramouli@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1449223661-2437-1-git-send-email-ray.huang@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch updates the PEBS support for Intel Atom to provide
an alias for the cycles:pp event used by perf record/top by default
nowadays.

On Atom, only INST_RETIRED:ANY supports PEBS, so we use this event
instead with a large cmask to count cycles. Given that Core2 has
the same issue, we use the intel_pebs_aliases_core2() function for Atom
as well.
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: kan.liang@intel.com
Link: http://lkml.kernel.org/r/1449172990-30183-3-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch fixes broken PEBS support on Intel Atom and Core2
due to wrong pointer arithmetic in intel_pmu_drain_pebs_core().

The get_next_pebs_record_by_bit() was called on PEBS format fmt0
which does not use the pebs_record_nhm layout.
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: kan.liang@intel.com
Fixes: 21509084 ("perf/x86/intel: Handle multiple records in the PEBS buffer")
Link: http://lkml.kernel.org/r/1449182000-31524-3-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patches fixes the LBR kernel crashes on Intel Atom.

The kernel was assuming that if the CPU supports 64-bit format
LBR, then it has an LBR_SELECT MSR. Atom uses 64-bit LBR format
but does not have LBR_SELECT. That was causing NULL pointer
dereferences in a couple of places.
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: kan.liang@intel.com
Fixes: 96f3eda6 ("perf/x86/intel: Fix static checker warning in lbr enable")
Link: http://lkml.kernel.org/r/1449182000-31524-2-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch fixes a bug in the filter_events() function.

The patch fixes the bug whereby if some mappings did not
exist, e.g., STALLED_CYCLES_FRONTEND, then any event after it
in the attrs array would disappear from the published list of
events in /sys/devices/cpu/events. This could be verified
easily on any system post SNB (which do not publish
STALLED_CYCLES_FRONTEND):

	$ ./perf stat -e cycles,ref-cycles true
	Performance counter stats for 'true':
              1,217,348      cycles
	<not supported>      ref-cycles

The problem is that in filter_events() there is an assumption
that the argument (attrs) is organized in increasing continuous
event indexes related to the event_map(). But if we remove the
non-supported events by shifing the position in the array, then
the lookup x86_pmu.event_map() needs to compensate for it, otherwise
we are looking up the wrong index. This patch corrects this problem
by compensating for the deleted events and with that ref-cycles
reappears (here shown on Haswell):

	$ perf stat -e ref-cycles,cycles true
	Performance counter stats for 'true':
         4,525,910      ref-cycles
         1,064,920      cycles
       0.002943888 seconds time elapsed
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: jolsa@kernel.org
Cc: kan.liang@intel.com
Fixes: 8300daa2 ("perf/x86: Filter out undefined events from sysfs events attribute")
Link: http://lkml.kernel.org/r/1449516805-6637-1-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add a new 'three-p' precise level, that uses INST_RETIRED.PREC_DIST as
base. The basic mechanism of abusing the inverse cmask to get all
cycles works the same as before.

PREC_DIST is available on Sandy Bridge or later. It had some problems
on Sandy Bridge, so we only use it on IvyBridge and later. I tested it
on Broadwell and Skylake.

PREC_DIST has special support for avoiding shadow effects, which can
give better results compare to UOPS_RETIRED. The drawback is that
PREC_DIST can only schedule on counter 1, but that is ok for cycle
sampling, as there is normally no need to do multiple cycle sampling
runs in parallel. It is still possible to run perf top in parallel, as
that doesn't use precise mode. Also of course the multiplexing can
still allow parallel operation.

:pp stays with the previous event.

Example:

Sample a loop with 10 sqrt with old cycles:pp

	  0.14 │10:   sqrtps %xmm1,%xmm0     <--------------
	  9.13 │      sqrtps %xmm1,%xmm0
	 11.58 │      sqrtps %xmm1,%xmm0
	 11.51 │      sqrtps %xmm1,%xmm0
	  6.27 │      sqrtps %xmm1,%xmm0
	 10.38 │      sqrtps %xmm1,%xmm0
	 12.20 │      sqrtps %xmm1,%xmm0
	 12.74 │      sqrtps %xmm1,%xmm0
	  5.40 │      sqrtps %xmm1,%xmm0
	 10.14 │      sqrtps %xmm1,%xmm0
	 10.51 │    ↑ jmp    10

We expect all 10 sqrt to get roughly the sample number of samples.

But you can see that the instruction directly after the JMP is
systematically underestimated in the result, due to sampling shadow
effects.

With the new PREC_DIST based sampling this problem is gone and all
instructions show up roughly evenly:

	  9.51 │10:   sqrtps %xmm1,%xmm0
	 11.74 │      sqrtps %xmm1,%xmm0
	 11.84 │      sqrtps %xmm1,%xmm0
	  6.05 │      sqrtps %xmm1,%xmm0
	 10.46 │      sqrtps %xmm1,%xmm0
	 12.25 │      sqrtps %xmm1,%xmm0
	 12.18 │      sqrtps %xmm1,%xmm0
	  5.26 │      sqrtps %xmm1,%xmm0
	 10.13 │      sqrtps %xmm1,%xmm0
	 10.43 │      sqrtps %xmm1,%xmm0
	  0.16 │    ↑ jmp    10

Even with PREC_DIST there is still sampling skid and the result is not
completely even, but systematic shadow effects are significantly
reduced.

The improvements are mainly expected to make a difference in high IPC
code. With low IPC it should be similar.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/1448929689-13771-2-git-send-email-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

I added UOPS_RETIRED.ALL by mistake to the Skylake PEBS event list for
cycles:pp. But the event is not documented for Skylake, and has some
issues.

The recommended replacement for cycles:pp is to use
INST_RETIRED.ANY+pebs as a base, similar to what CPUs before Sandy
Bridge did. This new event is called INST_RETIRED.TOTAL_CYCLES_PS. The
event is not really new, but has been already used by perf before
Sandy Bridge for the original cycles:p

Note the SDM doesn't document that event either, but it's being
documented in the latest version of the event list on:

  https://download.01.org/perfmon/SKL

This patch does:

 - Remove UOPS_RETIRED.ALL from the Skylake PEBS event list

 - Add INST_RETIRED.ANY to the Skylake PEBS event list, and an table entry to
   allow cmask=16,inv=1 for cycles:pp

 - We don't need an extra entry for the base INST_RETIRED event,
   because it is already covered by the catch-all PEBS table entry.

 - Switch Skylake to use the Core2 PEBS alias (which is
   INST_RETIRED.TOTAL_CYCLES_PS)
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/1448929689-13771-1-git-send-email-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Normally we drop PEBS events with a zero status field. But when
there is only a single PEBS event active we can assume the
PEBS record is for that event. The PEBS buffer is always flushed
when PEBS events are disabled, so there is no risk of mishandling
state PEBS records this way.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1449177740-5422-2-git-send-email-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

The recent commit:

  75f80859 ("perf/x86/intel/pebs: Robustify PEBS buffer drain")

causes lots of warnings on different CPUs before Skylake
when running PEBS intensive workloads.

They can have a zero status field in the PEBS record when
PEBS is racing with clearing of GLOBAl_STATUS.

This also can cause hangs (it seems there are still
problems with printk in NMI).

Disable the warning, but still ignore the record.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1449177740-5422-1-git-send-email-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

The CHECK_MEMBER_AT_END_OF(TYPE, MEMBER) checks whether MEMBER
is last member of TYPE by evaluating:

  offsetof(TYPE::MEMBER) + sizeof(TYPE::MEMBER) == sizeof(TYPE)

and ensuring TYPE::MEMBER is the last member of the TYPE.

This condition breaks on structs that are padded to be
aligned. This patch ensures the TYPE alignment is taken
into account.

This bug was revealed after adding cacheline alignment into
struct sched_entity, which broke task_struct::thread check:

  CHECK_MEMBER_AT_END_OF(struct task_struct, thread);
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1450707930-3445-1-git-send-email-jolsa@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

There is no need to worry about module and __init text disappearing
case, because that ftrace has a module notifier that is called when
a module is being unloaded and before the text goes away and this
code grabs the ftrace_lock mutex and removes the module functions
from the ftrace list, such that it will no longer do any
modifications to that module's text, the update to make functions
be traced or not is done under the ftrace_lock mutex as well.
And by now, __init section codes should not been modified
by ftrace, because it is black listed in recordmcount.c and
ignored by ftrace.

Link: http://lkml.kernel.org/r/1449367378-29430-6-git-send-email-huawei.libin@huawei.comReviewed-by: NThomas Gleixner <tglx@linutronix.de>
Suggested-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NLi Bin <huawei.libin@huawei.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The MMCFG PCI accessors weren't being setup for NumacConnect2
correctly due to over-early assignment; this would create the
potential for the wrong PCI domain to be accessed.

Fix this by using the correct arch-specific PCI init function.
Signed-off-by: NDaniel J Blueman <daniel@numascale.com>
Acked-by: NSteffen Persvold <sp@numascale.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1451498807-15920-1-git-send-email-daniel@numascale.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

This was meant to print base address and entry count; make it do so
again.

Fixes: 37868fe1 "x86/ldt: Make modify_ldt synchronous"
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Acked-by: NAndy Lutomirski <luto@kernel.org>
Link: http://lkml.kernel.org/r/56797D8402000078000C24F0@prv-mh.provo.novell.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

The related warning from gcc 6.0:

  arch/x86/kernel/ptrace.c:127:18: warning: ‘arg_offs_table’ defined but not used [-Wunused-const-variable]
   static const int arg_offs_table[] = {
                    ^~~~~~~~~~~~~~
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Link: http://lkml.kernel.org/r/1451137798-28701-1-git-send-email-chengang@emindsoft.com.cnSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The Linux kernel already has the concept of IRQ domain, wherein a
component can expose a set of IRQs which are managed by a particular
interrupt controller chip or other subsystem. The PCI driver exposes
the notion of an IRQ domain for Message-Signaled Interrupts (MSI) from
PCI Express devices. This patch exposes the functions which are
necessary for creating a MSI IRQ domain within a module.

[ tglx: Split it into x86 and core irq parts ]
Signed-off-by: NJake Oshins <jakeo@microsoft.com>
Cc: gregkh@linuxfoundation.org
Cc: kys@microsoft.com
Cc: devel@linuxdriverproject.org
Cc: olaf@aepfle.de
Cc: apw@canonical.com
Cc: vkuznets@redhat.com
Cc: haiyangz@microsoft.com
Cc: marc.zyngier@arm.com
Cc: bhelgaas@google.com
Link: http://lkml.kernel.org/r/1449769983-12948-4-git-send-email-jakeo@microsoft.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Adding the rtc platform device in non-privileged Xen PV guests causes
an IRQ conflict because these guests do not have legacy PIC and may
allocate irqs in the legacy range.

In a single VCPU Xen PV guest we should have:

/proc/interrupts:
           CPU0
  0:       4934  xen-percpu-virq      timer0
  1:          0  xen-percpu-ipi       spinlock0
  2:          0  xen-percpu-ipi       resched0
  3:          0  xen-percpu-ipi       callfunc0
  4:          0  xen-percpu-virq      debug0
  5:          0  xen-percpu-ipi       callfuncsingle0
  6:          0  xen-percpu-ipi       irqwork0
  7:        321   xen-dyn-event     xenbus
  8:         90   xen-dyn-event     hvc_console
  ...

But hvc_console cannot get its interrupt because it is already in use
by rtc0 and the console does not work.

  genirq: Flags mismatch irq 8. 00000000 (hvc_console) vs. 00000000 (rtc0)

We can avoid this problem by realizing that unprivileged PV guests (both
Xen and lguests) are not supposed to have rtc_cmos device and so
adding it is not necessary.

Privileged guests (i.e. Xen's dom0) do use it but they should not have
irq conflicts since they allocate irqs above legacy range (above
gsi_top, in fact).

Instead of explicitly testing whether the guest is privileged we can
extend pv_info structure to include information about guest's RTC
support.
Reported-and-tested-by: NSander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: vkuznets@redhat.com
Cc: xen-devel@lists.xenproject.org
Cc: konrad.wilk@oracle.com
Cc: stable@vger.kernel.org # 4.2+
Link: http://lkml.kernel.org/r/1449842873-2613-1-git-send-email-boris.ostrovsky@oracle.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Those are stupid and code should use static_cpu_has_safe() or
boot_cpu_has() instead. Kill the least used and unused ones.

The remaining ones need more careful inspection before a conversion can
happen. On the TODO.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1449481182-27541-4-git-send-email-bp@alien8.de
Cc: David Sterba <dsterba@suse.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Add an enum for the ->x86_capability array indices and cleanup
get_cpu_cap() by killing some redundant local vars.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1449481182-27541-3-git-send-email-bp@alien8.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Turn the CPUID leafs which are proper CPUID feature bit leafs into
separate ->x86_capability words.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1449481182-27541-2-git-send-email-bp@alien8.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Now, multiple CPUs can receive an external NMI simultaneously by
specifying the "apic_extnmi=all" command line parameter. When we take
a crash dump by using external NMI with this option, we fail to save
registers into the crash dump. This happens as follows:

  CPU 0                              CPU 1
  ================================   =============================
  receive an external NMI
  default_do_nmi()                   receive an external NMI
    spin_lock(&nmi_reason_lock)      default_do_nmi()
    io_check_error()                   spin_lock(&nmi_reason_lock)
      panic()                            busy loop
      ...
        kdump_nmi_shootdown_cpus()
          issue NMI IPI -----------> blocked until IRET
                                         busy loop...

Here, since CPU 1 is in NMI context, an additional NMI from CPU 0
remains unhandled until CPU 1 IRETs. However, CPU 1 will never execute
IRET so the NMI is not handled and the callback function to save
registers is never called.

To solve this issue, we check if the IPI for crash dumping was issued
while waiting for nmi_reason_lock to be released, and if so, call its
callback function directly. If the IPI is not issued (e.g. kdump is
disabled), the actual behavior doesn't change.
Signed-off-by: NHidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: kexec@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/20151210065245.4587.39316.stgit@softrsSigned-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch introduces a command line parameter apic_extnmi:

 apic_extnmi=( bsp|all|none )

The default value is "bsp" and this is the current behavior: only the
Boot-Strapping Processor receives an external NMI.

"all" allows external NMIs to be broadcast to all CPUs. This would
raise the success rate of panic on NMI when BSP hangs in NMI context
or the external NMI is swallowed by other NMI handlers on the BSP.

If you specify "none", no CPUs receive external NMIs. This is useful for
the dump capture kernel so that it cannot be shot down by accidentally
pressing the external NMI button (on platforms which have it) while
saving a crash dump.
Signed-off-by: NHidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Bandan Das <bsd@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: kexec@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/20151210014632.25437.43778.stgit@softrsSigned-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Currently, kdump_nmi_shootdown_cpus(), a subroutine of crash_kexec(),
sends an NMI IPI to CPUs which haven't called panic() to stop them,
save their register information and do some cleanups for crash dumping.
However, if such a CPU is infinitely looping in NMI context, we fail to
save its register information into the crash dump.

For example, this can happen when unknown NMIs are broadcast to all
CPUs as follows:

  CPU 0                             CPU 1
  ===========================       ==========================
  receive an unknown NMI
  unknown_nmi_error()
    panic()                         receive an unknown NMI
      spin_trylock(&panic_lock)     unknown_nmi_error()
      crash_kexec()                   panic()
                                        spin_trylock(&panic_lock)
                                        panic_smp_self_stop()
                                          infinite loop
        kdump_nmi_shootdown_cpus()
          issue NMI IPI -----------> blocked until IRET
                                          infinite loop...

Here, since CPU 1 is in NMI context, the second NMI from CPU 0 is
blocked until CPU 1 executes IRET. However, CPU 1 never executes IRET,
so the NMI is not handled and the callback function to save registers is
never called.

In practice, this can happen on some servers which broadcast NMIs to all
CPUs when the NMI button is pushed.

To save registers in this case, we need to:

  a) Return from NMI handler instead of looping infinitely
  or
  b) Call the callback function directly from the infinite loop

Inherently, a) is risky because NMI is also used to prevent corrupted
data from being propagated to devices.  So, we chose b).

This patch does the following:

1. Move the infinite looping of CPUs which haven't called panic() in NMI
   context (actually done by panic_smp_self_stop()) outside of panic() to
   enable us to refer pt_regs. Please note that panic_smp_self_stop() is
   still used for normal context.

2. Call a callback of kdump_nmi_shootdown_cpus() directly to save
   registers and do some cleanups after setting waiting_for_crash_ipi which
   is used for counting down the number of CPUs which handled the callback
Signed-off-by: NHidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Gobinda Charan Maji <gobinda.cemk07@gmail.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Javi Merino <javi.merino@arm.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: kexec@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Cc: lkml <linux-kernel@vger.kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Link: http://lkml.kernel.org/r/20151210014628.25437.75256.stgit@softrs
[ Cleanup comments, fixup formatting. ]
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

If panic on NMI happens just after panic() on the same CPU, panic() is
recursively called. Kernel stalls, as a result, after failing to acquire
panic_lock.

To avoid this problem, don't call panic() in NMI context if we've
already entered panic().

For that, introduce nmi_panic() macro to reduce code duplication. In
the case of panic on NMI, don't return from NMI handlers if another CPU
already panicked.
Signed-off-by: NHidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Gobinda Charan Maji <gobinda.cemk07@gmail.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Javi Merino <javi.merino@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: kexec@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Cc: lkml <linux-kernel@vger.kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Link: http://lkml.kernel.org/r/20151210014626.25437.13302.stgit@softrs
[ Cleanup comments, fixup formatting. ]
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Intel's MCA implementation broadcasts MCEs to all CPUs on the
node. This poses a problem for offlined CPUs which cannot
participate in the rendezvous process:

  Kernel panic - not syncing: Timeout: Not all CPUs entered broadcast exception handler
  Kernel Offset: disabled
  Rebooting in 100 seconds..

More specifically, Linux does a soft offline of a CPU when
writing a 0 to /sys/devices/system/cpu/cpuX/online, which
doesn't prevent the #MC exception from being broadcasted to that
CPU.

Ensure that offline CPUs don't participate in the MCE rendezvous
and clear the RIP valid status bit so that a second MCE won't
cause a shutdown.

Without the patch, mce_start() will increment mce_callin and
wait for all CPUs. Offlined CPUs should avoid participating in
the rendezvous process altogether.
Signed-off-by: NAshok Raj <ashok.raj@intel.com>
[ Massage commit message. ]
Signed-off-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NTony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1449742346-21470-2-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/4933029991103ae44672c82b97a20035f5c1fe4f.1449702533.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/9d37826fdc7e2d2809efe31d5345f97186859284.1449702533.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Now that we have generic MSR trace points we can remove the old
hackish perf MSR read tracing code.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/1449018060-1742-4-git-send-email-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>